International Organization for Standards published July 2019 (Part 2)
-   +   A-   A+     25/07/2019

ISO/IEC 23000-21:2019

Information technology -- Multimedia application format (MPEG-A) -- Part 21: Visual identity management application format

ISO 7627-4:1983

Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 4: Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5 % (m/m)

ISO 7721:1983

Countersunk head screws -- Head configuration and gauging

ISO 7627-5:1983

Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m)

ISO 14623:2003

Space systems - Pressure vessels and pressurized structures -- Design and operation

ISO 4059:1978

Polyethylene (PE) pipes -- Pressure drop in mechanical pipe-jointing systems -- Method of test and requirements

ISO 22803:2004

Dentistry -- Membrane materials for guided tissue regeneration in oral and maxillofacial surgery -- Contents of a technical file

ISO 5832-4:2014

Implants for surgery -- Metallic materials -- Part 4: Cobalt-chromium-molybdenum casting alloy

ISO 17541:2014

Plastics -- Quantitative evaluation of scratch-induced damage and scratch visibility

ISO 5172:2006

Gas welding equipment -- Blowpipes for gas welding, heating and cutting -- Specifications and tests

ISO/IEC 29341-10-1:2008

Information technology -- UPnP Device Architecture -- Part 10-1: Quality of Service Device Control Protocol - Quality of Service Architecture

ISO 15680:2003

Water quality -- Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption

ISO 6103:2014

Bonded abrasive products -- Permissible unbalances of grinding wheels as delivered -- Static testing

ISO/IEC 29341-9-12:2008

Information technology -- UPnP Device Architecture -- Part 9-12: Imaging Device Control Protocol - Print Basic Service

ISO 21007-1:2005

Gas cylinders -- Identification and marking using radio frequency identification technology -- Part 1: Reference architecture and terminology

ISO 6966-2:2014

Aircraft ground equipment -- Basic requirements -- Part 2: Safety requirements

ISO 3290-2:2014

Rolling bearings -- Balls -- Part 2: Ceramic balls

ISO 3290-1:2014

Rolling bearings -- Balls -- Part 1: Steel balls

ISO 8367-1:1993

Packaging -- Dimensional tolerances for general purpose sacks -- Part 1: Paper sacks

ISO 7627-6:1985

Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m)

ISO 14952-1:2003

Space systems -- Surface cleanliness of fluid systems -- Part 1: Vocabulary

ISO/IEC 29341-10-10:2008

Information technology -- UPnP Device Architecture -- Part 10-10: Quality of Service Device Control Protocol - Quality of Service Device Service

ISO 20775:2009

Information and documentation -- Schema for holdings information

ISO 7721-2:1990

Countersunk flat head screws -- Part 2: Penetration depth of cross recesses

ISO 9606-1:2012

Qualification testing of welders -- Fusion welding -- Part 1: Steels

ISO 6962:2004

Nuclear energy -- Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste

ISO/IEC 29341-11-2:2008

Information technology -- UPnP Device Architecture -- Part 11-2: Quality of Service Device Control Protocol - Level 2 - Quality of Service Schemas

ISO 16552:2014

Heavy commercial vehicles and buses -- Stopping distance in straight-line braking with ABS -- Open loop and closed loop test methods

ISO 8216-99:2002

Petroleum products -- Fuels (class F) -- Classification -- Part 99: General

ISO 7403:1998

Aerospace -- Spline drives -- Wrenching configuration -- Metric series

ISO 245:1998

Aerospace -- Lockwire -- Diameters

ISO/IEC 11179-3:2013

Information technology -- Metadata registries (MDR) -- Part 3: Registry metamodel and basic attributes

ISO/TS 16976-8:2013

Respiratory protective devices -- Human factors -- Part 8: Ergonomic factors

ISO 3230:1998

Aerospace -- Rivets, solid, 100 degrees normal countersunk head with dome, metallic material, with or without surface treatment -- Dimensions

ISO/IEC 29341-13-10:2008

Information technology -- UPnP Device Architecture -- Part 13-10: Device Security Device Control Protocol - Device Security Service

ISO 14388-2:2014

Soil quality -- Acid-base accounting procedure for acid sulfate soils -- Part 2: Chromium reducible sulfur (CRS) methodology

ISO 2295:1974

Avocados -- Guide for storage and transport

ISO 21593:2019

Ships and marine technology -- Technical requirements for dry-disconnect/connect couplings for bunkering liquefied natural gas

ISO 7685:2019

Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial ring stiffness

ISO 10062:2006

Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)

ISO 6035:1983

Cinematography -- Viewing conditions for the evaluation of films and slides for television -- Colours, luminances and dimensions

ISO 15483:1999

Cross recessed raised countersunk head drilling screws with tapping screw thread

ISO 11485-3:2014

Glass in building -- Curved glass -- Part 3: Requirements for curved tempered and curved laminated safety glass

ISO/TS 16460:2016

Intelligent transport systems -- Communications access for land mobiles (CALM) -- Communication protocol messages for global usage

ISO 15481:1999

Cross recessed pan head drilling screws with tapping screw thread

ISO 10766:2014

Hydraulic fluid power -- Cylinders -- Housing dimensions for rectangular-section-cut bearing rings for pistons and rods

ISO 15482:1999

Cross recessed countersunk head drilling screws with tapping screw thread

ISO 12290:2000

Aerospace -- Rivets, solid, in titanium or titanium alloy -- Procurement specification

ISO/IEC 29167-1:2014

Information technology -- Automatic identification and data capture techniques -- Part 1: Security services for RFID air interfaces

ISO 8243:2013

Cigarettes -- Sampling

ISO 10362-2:2013

Cigarettes -- Determination of water in smoke condensates -- Part 2: Karl Fischer method

ISO 9374-3:2014

Cranes -- Information to be provided for enquiries, orders, offers and supply -- Part 3: Tower cranes

ISO 2538-1:2014

Geometrical product specifications (GPS) -- Wedges -- Part 1: Series of angles and slopes

ISO 14619:2003

Space systems -- Space experiments -- General requirements

ISO 15841:2014

Dentistry -- Wires for use in orthodontics

ISO 15028:2014

Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of hydrolysable chlorine

ISO 25761:2014

Plastics -- Polyols for use in the production of polyurethanes -- Determination of basicity (total amine value), expressed as percent nitrogen

ISO 16165:2013

Ships and marine technology -- Marine environment protection -- Terminology relating to oil spill response

ISO 20906:2009

Acoustics -- Unattended monitoring of aircraft sound in the vicinity of airports

ISO 24113:2019

Space systems -- Space debris mitigation requirements

ISO 7627-3:1983

Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 3: Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m)

ISO 6743-1:2002

Lubricants, industrial oils and related products (class L) -- Classification -- Part 1: Family A (Total loss systems)

ISO 6743-99:2002

Lubricants, industrial oils and related products (class L) -- Classification -- Part 99: General

ISO 16665:2014

Water quality -- Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna

ISO 7627-1:1983

Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 1: General requirements

ISO 7627-2:1983

Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m)

ISO 7176-22:2014

Wheelchairs -- Part 22: Set-up procedures

ISO 12256:2002

Aerospace -- Drives, internal, cruciform, ribbed -- Metric series

ISO 15638-6:2014

Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 6: Regulated applications

ISO 10664:2014

Hexalobular internal driving feature for bolts and screws

ISO 18747-2:2019

Determination of particle density by sedimentation methods -- Part 2: Multi-velocity approach

ISO 17401:2004

Space systems -- Spacecraft interface requirements document for launch vehicle services

ISO/IEC 11976:2008

Information technology -- Data interchange on 130 mm rewritable and write-once-read-many ultra density optical (UDO) disk cartridges -- Capacity: 60 Gbytes per cartridge -- Second generation

ISO 5797:2004

Ships and marine technology -- Windows and side scuttles for fire-resistant constructions

ISO 19905-3:2017

Petroleum and natural gas industries -- Site-specific assessment of mobile offshore units -- Part 3: Floating unit

ISO 6978-2:2003

Natural gas -- Determination of mercury -- Part 2: Sampling of mercury by amalgamation on gold/platinum alloy

ISO 14344:2010

Welding consumables -- Procurement of filler materials and fluxes

ISO 14279:2002

Aerospace -- Drives, internal, cruciform -- Metric series

ISO Guide 33:2015

Reference materials -- Good practice in using reference materials

ISO 1051:1999

Rivet shank diameters

ISO 3797:1976

Shipbuilding -- Vertical steel ladders

ISO 14385-2:2014

Stationary source emissions -- Greenhouse gases -- Part 2: Ongoing quality control of automated measuring systems

ISO 14385-1:2014

Stationary source emissions -- Greenhouse gases -- Part 1: Calibration of automated measuring systems

ISO 14280:2002

Aerospace -- Drivers, ribbed, for internal cruciform ribbed or unribbed drives -- Metric series

ISO 5256:1985

Steel pipes and fittings for buried or submerged pipe lines -- External and internal coating by bitumen or coal tar derived materials

ISO 14281:2002

Aerospace -- Gauges, for internal cruciform ribbed or unribbed drives -- Metric series

ISO/IEC 29341-4-3:2008

Information technology -- UPnP Device Architecture -- Part 4-3: Audio Video Device Control Protocol - Level 2 - Media Server Device

ISO 13803:2014

Paints and varnishes -- Determination of haze on paint films at 20 degrees

ISO/IEC 20944-3:2013

Information technology -- Metadata Registries Interoperability and Bindings (MDR-IB) -- Part 3: API bindings

ISO 24370:2005

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method

ISO/IEC 20944-1:2013

Information technology -- Metadata Registries Interoperability and Bindings (MDR-IB) -- Part 1: Framework, common vocabulary, and common provisions for conformance

ISO 7435:1983

Slotted set screws with long dog point

ISO/IEC 20944-2:2013

Information technology -- Metadata Registries Interoperability and Bindings (MDR-IB) -- Part 2: Coding bindings

ISO 7436:1983

Slotted set screws with cup point

ISO 13787:2003

Thermal insulation products for building equipment and industrial installations -- Determination of declared thermal conductivity

ISO 6659:1981

Sweet pepper -- Guide to refrigerated storage and transport

ISO 7434:1983

Slotted set screws with cone point

ISO 13414:1997

Aerospace -- Airframe needle roller bearings, single-row, shielded -- Inch series

ISO 15860:2006

Space systems -- Gas contamination -- Measurement methods for field tests

ISO 16063-42:2014

Methods for the calibration of vibration and shock transducers -- Part 42: Calibration of seismometers with high accuracy using acceleration of gravity

ISO 3046-1:2002

Reciprocating internal combustion engines -- Performance -- Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods -- Additional requirements for engines for general use

ISO 16251-1:2014

Acoustics -- Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up -- Part 1: Heavyweight compact floor

ISO 14869-2:2002

Soil quality -- Dissolution for the determination of total element content -- Part 2: Dissolution by alkaline fusion

IEC 80601-2-78:2019

Medical electrical equipment -- Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation

IEC 80601-2-77:2019

Medical electrical equipment -- Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment

ISO 5667-11:2009

Water quality -- Sampling -- Part 11: Guidance on sampling of groundwaters

ISO 8459:2009

Information and documentation -- Bibliographic data element directory for use in data exchange and enquiry

ISO 5019-6:2005

Refractory bricks -- Dimensions -- Part 6: Basic bricks for oxygen steel-making converters

ISO 26868:2009

Space data and information transfer systems -- Image data compression

ISO 23065:2009

Milk fat from enriched dairy products -- Determination of omega-3 and omega-6 fatty acid content by gas-liquid chromatography

ISO 15516:2006

Ships and marine technology -- Launching appliances for davit-launched lifeboats

ISO 13374-1:2003

Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 1: General guidelines

ISO 9128:2006

Road vehicles -- Graphical symbols to designate brake fluid types

ISO 17299-1:2014

Textiles -- Determination of deodorant property -- Part 1: General principle

ISO 11782-1:1998

Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 1: Cycles to failure testing

ISO 17299-3:2014

Textiles -- Determination of deodorant property -- Part 3: Gas chromatography method

ISO 17299-2:2014

Textiles -- Determination of deodorant property -- Part 2: Detector tube method

ISO 5779:1987

Shipbuilding -- Ordinary rectangular windows -- Positioning

ISO 15864:2004

Space systems -- General test methods for space craft, subsystems and units

ISO 5780:1987

Shipbuilding -- Side scuttles -- Positioning

ISO/IEC TS 20013:2015

Information technology for learning, education and training -- A reference framework of e-Portfolio information

ISO 8723:1986

Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of oil content -- Method by solvent extraction

ISO 19378:2003

Lubricants, industrial oils and related products (class L) -- Machine-tool lubricants -- Categories and specifications

ISO 13203:2005

Chains, sprockets and accessories -- List of equivalent terms

ISO 7606:1988

Shipbuilding -- Inland navigation vessels -- Draught scales

ISO 7203-2:2019

Fire extinguishing media -- Foam concentrates -- Part 2: Specification for medium- and high-expansion foam concentrates for top application to water-immiscible liquids

ISO 8004:1985

Carbonaceous materials for the production of aluminium -- Calcined coke and calcined carbon products -- Determination of the density in xylene -- Pyknometric method

ISO 7203-1:2019

Fire extinguishing media -- Foam concentrates -- Part 1: Specification for low-expansion foam concentrates for top application to water-immiscible liquids

ISO 8003:1985

Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Measurement of dynamic viscosity

ISO 20652:2006

Space data and information transfer systems -- Producer-archive interface -- Methodology abstract standard

ISO 7203-3:2019

Fire extinguishing media -- Foam concentrates -- Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids

ISO/TS 23893-2:2007

Water quality -- Biochemical and physiological measurements on fish -- Part 2: Determination of ethoxyresorufin-O-deethylase (EROD)

ISO 15536-1:2005

Ergonomics -- Computer manikins and body templates -- Part 1: General requirements

ISO 7214:2012

Cellular plastics -- Polyethylene -- Methods of test

ISO 230-10:2016

Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools

ISO 10669:1999

Plain washers for tapping screw and washer assemblies -- Normal and large series -- Product grade A

ISO/TS 13530:2009

Water quality -- Guidance on analytical quality control for chemical and physicochemical water analysis

ISO 8006:1985

Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of ash

ISO 8790:1987

Information processing systems -- Computer system configuration diagram symbols and conventions

ISO 10666:1999

Drilling screws with tapping screw thread -- Mechanical and functional properties

ISO/IEC 24751-1:2008

Information technology -- Individualized adaptability and accessibility in e-learning, education and training -- Part 1: Framework and reference model

ISO 15586:2003

Water quality -- Determination of trace elements using atomic absorption spectrometry with graphite furnace

ISO 21755-1:2019

Motorcycles -- Measurement method for evaporative emissions -- Part 1: SHED test procedure

ISO/IEC 20944-5:2013

Information technology -- Metadata Registries Interoperability and Bindings (MDR-IB) -- Part 5: Profiles

ISO/TS 13899-1:2004

Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: Determination of Mo content

ISO/IEC 20944-4:2013

Information technology -- Metadata Registries Interoperability and Bindings (MDR-IB) -- Part 4: Protocol bindings

ISO 21648:2008

Space systems -- Flywheel module design and testing

ISO 5841-2:2014

Implants for surgery -- Cardiac pacemakers -- Part 2: Reporting of clinical performance of populations of pulse generators or leads

ISO 13216-2:2004

Road vehicles -- Anchorages in vehicles and attachments to anchorages for child restraint systems -- Part 2: Top tether anchorages and attachments

ISO 8999:2001

Reciprocating internal combustion engines -- Graphical symbols

ISO 14356:2003

Dentistry -- Duplicating material

ISO 22632:2019

Adhesives -- Test methods for adhesives for floor and wall coverings -- Shear test

ISO 22631:2019

Adhesives -- Test methods for adhesives for floor and wall coverings -- Peel test

ISO 9089:2019

Marine structures -- Mobile offshore units -- Mooring positioning windlasses and winches

ISO 4928:2006

Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)

ISO 6118:2006

Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)

ISO 7335:1987

Iron ores -- Determination of combined water content -- Karl Fischer titrimetric method

ISO 6000:1981

Round-headed cabbage -- Storage in the open

ISO 14857:2014

Thermal performance in the built environment -- Determination of air permeance of building materials

ISO/TR 22770:2019

Preparation of steel substrates before application of paints and related products -- Analytical colorimetry method to support visual assessment of surface preparation grades

ISO 6974-6:2002

Natural gas -- Determination of composition with defined uncertainty by gas chromatography -- Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns

ISO/IEC 17811-3:2014

Information Technology -- Device control and management -- Part 3: Specification of Reliable Message Delivery Protocol

ISO/IEC 15149-1:2014

Information technology -- Telecommunications and information exchange between systems -- Magnetic field area network (MFAN) -- Part 1: Air interface

ISO 3400:1997

Cigarettes -- Determination of alkaloids in smoke condensates -- Spectrometric method

ISO 17381:2003

Water quality -- Selection and application of ready-to-use test kit methods in water analysis

ISO 13903:2005

Animal feeding stuffs -- Determination of amino acids content

ISO 10628-1:2014

Diagrams for the chemical and petrochemical industry -- Part 1: Specification of diagrams

ISO 6630:1986

Documentation -- Bibliographic control characters

ISO 9088:1997

Carbonaceous materials used for the production of aluminium -- Cathode blocks and prebaked anodes -- Determination of the density in xylene by a pyknometric method

ISO 6791:1981

Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of contents of quinoline-insoluble material

ISO 10551:2019

Ergonomics of the physical environment -- Subjective judgement scales for assessing physical environments

ISO/TS 12927:1999

Lubricants, industrial oils and related products (class L) -- Family M (Metalworking) -- Guidelines for establishing specifications

ISO 14314:2004

Reciprocal internal combustion engines -- Recoil starting equipment -- General safety requirements

ISO 14309:2019

Rubber, vulcanized or thermoplastic -- Determination of volume and/or surface resistivity

ISO 14396:2002

Reciprocating internal combustion engines -- Determination and method for the measurement of engine power -- Additional requirements for exhaust emission tests in accordance with ISO 8178

ISO 22637:2019

Adhesives -- Test of adhesive for floor covering -- Determination of the electrical resistance of adhesive films and composites

ISO 389-5:2006

Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz

ISO 10059-2:2003

Dense, shaped refractory products -- Determination of cold compressive strength -- Part 2: Test with packing

ISO 8124-2:2014

Safety of toys -- Part 2: Flammability

ISO 18436-4:2014

Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 4: Field lubricant analysis

ISO 15265:2004

Ergonomics of the thermal environment -- Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions

ISO 24504:2014

Ergonomics -- Accessible design -- Sound pressure levels of spoken announcements for products and public address systems

ISO 8752:2009

Spring-type straight pins -- Slotted, heavy duty

ISO 18436-7:2014

Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 7: Thermography

ISO 13337:2009

Spring-type straight pins -- Slotted, light duty

ISO 16336:2014

Applications of statistical and related methods to new technology and product development process -- Robust parameter design (RPD)

ISO 23812:2009

Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth calibration for silicon using multiple delta-layer reference materials

ISO 10075-3:2004

Ergonomic principles related to mental workload -- Part 3: Principles and requirements concerning methods for measuring and assessing mental workload

ISO 15709:2002

Soil quality -- Soil water and the unsaturated zone -- Definitions, symbols and theory

ISO 9869-1:2014

Thermal insulation -- Building elements -- In-situ measurement of thermal resistance and thermal transmittance -- Part 1: Heat flow meter method

ISO/TS 12928:1999

Lubricants, industrial oils and related products (class L) -- Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications

ISO 8092-2:2005

Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 2: Definitions, test methods and general performance requirements

ISO 22635:2019

Adhesives -- Test methods for adhesives for plastic or rubber floor coverings or wall coverings -- Determination of dimensional changes after accelerated ageing

ISO/IEC 29341-5-1:2008

Information technology -- UPnP Device Architecture -- Part 5-1: Digital Security Camera Device Control Protocol - Digital Security Camera Device

ISO 11649:2009

Financial services -- Core banking -- Structured creditor reference to remittance information

ISO 13998:2003

Protective clothing -- Aprons, trousers and vests protecting against cuts and stabs by hand knives

ISO/IEC 29341-5-12:2008

Information technology -- UPnP Device Architecture -- Part 5-12: Digital Security Camera Device Control Protocol - Digital Security Camera Still Image Service

ISO 13486-1:1999

Road vehicles -- Hydraulic braking systems -- Part 1: Double-flare pipes, tapped holes, male fittings and tube seats

ISO 3012:1999

Petroleum products -- Determination of thiol (mercaptan) sulfur in light and middle distillate fuels -- Potentiometric method

ISO 11866-1:2005

Milk and milk products -- Enumeration of presumptive Escherichia coli -- Part 1: Most probable number technique using 4-methylumbelliferyl-beta-D-glucuronide (MUG)

ISO 11866-2:2005

Milk and milk products -- Enumeration of presumptive Escherichia coli -- Part 2: Colony-count technique at 44 degrees C using membranes

ISO 22608:2004

Protective clothing -- Protection against liquid chemicals -- Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials

ISO 9606-2:2004

Qualification test of welders -- Fusion welding -- Part 2: Aluminium and aluminium alloys

ISO 17080:2005

Manually portable agricultural and forestry machines and powered lawn and garden equipment -- Design principles for single-panel product safety labels

ISO 15681-1:2003

Water quality -- Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) -- Part 1: Method by flow injection analysis (FIA)

ISO 18436-6:2014

Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 6: Acoustic emission

ISO 20774:2013

Cigarettes -- Determination of carbon monoxide in sidestream smoke -- Method using a routine analytical linear smoking machine equipped with a fishtail chimney

ISO 20773:2013

Cigarettes -- Determination of nicotine-free dry particulate matter and nicotine in sidestream smoke -- Method using a routine analytical linear smoking machine equipped with a fishtail chimney

ISO 6743-13:2002

Lubricants, industrial oils and related products (class L) -- Classification -- Part 13: Family G (Slideways)

ISO/TS 10832:2009

Soil quality -- Effects of pollutants on mycorrhizal fungi -- Spore germination test

ISO 8686-4:2005

Cranes -- Design principles for loads and load combinations -- Part 4: Jib cranes

ISO 16000-9:2006

Indoor air -- Part 9: Determination of the emission of volatile organic compounds from building products and furnishing -- Emission test chamber method

ISO/IEC 29341-6-11:2008

Information technology -- UPnP Device Architecture -- Part 6-11: Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan Operating Mode Service

ISO 9964-1:1993

Water quality -- Determination of sodium and potassium -- Part 1: Determination of sodium by atomic absorption spectrometry

ISO 10245-4:2004

Cranes -- Limiting and indicating devices -- Part 4: Jib cranes

ISO 16000-11:2006

Indoor air -- Part 11: Determination of the emission of volatile organic compounds from building products and furnishing -- Sampling, storage of samples and preparation of test specimens

ISO 105-F10:1989

Textiles -- Tests for colour fastness -- Part F10: Specification for adjacent fabric: Multifibre

ISO/IEC 29341-6-10:2008

Information technology -- UPnP Device Architecture -- Part 6-10: Heating, Ventilation, and Air Conditioning Device Control Protocol - Control Valve Service

ISO/IEC 29341-6-12:2008

Information technology -- UPnP Device Architecture -- Part 6-12: Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan Speed Service

ISO 8890:1988

Dense shaped refractory products -- Determination of resistance to sulfuric acid

ISO 9964-3:1993

Water quality -- Determination of sodium and potassium -- Part 3: Determination of sodium and potassium by flame emission spectrometry

ISO/IEC 29341-7-1:2008

Information technology -- UPnP Device Architecture -- Part 7-1: Lighting Device Control Protocol - Binary Light Device

ISO/IEC 29341-6-16:2008

Information technology -- UPnP Device Architecture -- Part 6-16: Heating, Ventilation, and Air Conditioning Device Control Protocol - Temperature Setpoint Service

ISO/IEC 29341-6-17:2008

Information technology -- UPnP Device Architecture -- Part 6-17: Heating, Ventilation, and Air Conditioning Device Control Protocol - User Operating Mode Service

ISO 22241-5:2019

Diesel engines -- NOx reduction agent AUS 32 -- Part 5: Refilling interface for passenger cars

ISO 5866:1983

Aircraft -- 2 and 3A plug-in base change-over relays, Type II, with crimped connections -- Clearance and fixing dimensions

ISO 9964-2:1993

Water quality -- Determination of sodium and potassium -- Part 2: Determination of potassium by atomic absorption spectrometry

ISO 9407:2019

Footwear sizing -- Mondopoint system of sizing and marking

ISO 22478:2006

Water quality -- Determination of certain explosives and related compounds -- Method using high-performance liquid chromatography (HPLC) with UV detection

ISO 9986:2014

Composition cork for shoe outsoles

ISO 20508:2003

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of light transmittance of ceramic films with transparent substrate

ISO 16784-2:2006

Corrosion of metals and alloys -- Corrosion and fouling in industrial cooling water systems -- Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig

ISO 20079:2005

Water quality -- Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) -- Duckweed growth inhibition test

ISO 10816-7:2009

Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts

ISO 1920-9:2009

Testing of concrete -- Part 9: Determination of creep of concrete cylinders in compression

ISO 1920-8:2009

Testing of concrete -- Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory

ISO 14657:2005

Zinc-coated steel for the reinforcement of concrete

ISO 9612:2009

Acoustics -- Determination of occupational noise exposure -- Engineering method

ISO/IEC 11179-6:2015

Information technology -- Metadata registries (MDR) -- Part 6: Registration

ISO 22643:2003

Space data and information transfer systems -- Data entity dictionary specification language (DEDSL) -- XML/DTD Syntax

ISO 8253-2:2009

Acoustics -- Audiometric test methods -- Part 2: Sound field audiometry with pure-tone and narrow-band test signals

ISO 2469:2014

Paper, board and pulps -- Measurement of diffuse radiance factor (diffuse reflectance factor)

ISO/IEC 29341-8-3:2008

Information technology -- UPnP Device Architecture -- Part 8-3: Internet Gateway Device Control Protocol - Wide Area Network Device

ISO/IEC 29341-8-4:2008

Information technology -- UPnP Device Architecture -- Part 8-4: Internet Gateway Device Control Protocol - Wide Area Network Connection Device.


Other news