ISO/IEC
23000-21:2019
Information
technology -- Multimedia application format (MPEG-A) -- Part 21: Visual
identity management application format
ISO
7627-4:1983
Hardmetals
-- Chemical analysis by flame atomic absorption spectrometry -- Part 4:
Determination of molybdenum, titanium and vanadium in contents from 0,01 to 0,5
% (m/m)
ISO 7721:1983
ISO 7627-5:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 5: Determination of cobalt, iron, manganese, molybdenum, nickel, titanium and vanadium in contents from 0,5 to 2 % (m/m)
ISO 14623:2003
Space systems - Pressure vessels and pressurized structures -- Design and operation
ISO 4059:1978
Polyethylene (PE) pipes -- Pressure drop in mechanical pipe-jointing systems -- Method of test and requirements
ISO 22803:2004
Dentistry -- Membrane materials for guided tissue regeneration in oral and maxillofacial surgery -- Contents of a technical file
ISO 5832-4:2014
Implants for surgery -- Metallic materials -- Part 4: Cobalt-chromium-molybdenum casting alloy
ISO 17541:2014
Plastics -- Quantitative evaluation of scratch-induced damage and scratch visibility
ISO 5172:2006
Gas welding equipment -- Blowpipes for gas welding, heating and cutting -- Specifications and tests
ISO/IEC 29341-10-1:2008
Information technology -- UPnP Device Architecture -- Part 10-1: Quality of Service Device Control Protocol - Quality of Service Architecture
ISO 15680:2003
Water quality -- Gas-chromatographic determination of a number of monocyclic aromatic hydrocarbons, naphthalene and several chlorinated compounds using purge-and-trap and thermal desorption
ISO 6103:2014
Bonded abrasive products -- Permissible unbalances of grinding wheels as delivered -- Static testing
ISO/IEC 29341-9-12:2008
Information technology -- UPnP Device Architecture -- Part 9-12: Imaging Device Control Protocol - Print Basic Service
ISO 21007-1:2005
Gas cylinders -- Identification and marking using radio frequency identification technology -- Part 1: Reference architecture and terminology
ISO 6966-2:2014
Aircraft ground equipment -- Basic requirements -- Part 2: Safety requirements
ISO 3290-2:2014
Rolling bearings -- Balls -- Part 2: Ceramic balls
ISO 3290-1:2014
Rolling bearings -- Balls -- Part 1: Steel balls
ISO 8367-1:1993
Packaging -- Dimensional tolerances for general purpose sacks -- Part 1: Paper sacks
ISO 7627-6:1985
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 6: Determination of chromium in contents from 0,01 to 2 % (m/m)
ISO 14952-1:2003
Space systems -- Surface cleanliness of fluid systems -- Part 1: Vocabulary
ISO/IEC 29341-10-10:2008
Information technology -- UPnP Device Architecture -- Part 10-10: Quality of Service Device Control Protocol - Quality of Service Device Service
ISO 20775:2009
Information and documentation -- Schema for holdings information
ISO 7721-2:1990
Countersunk flat head screws -- Part 2: Penetration depth of cross recesses
ISO 9606-1:2012
Qualification testing of welders -- Fusion welding -- Part 1: Steels
ISO 6962:2004
Nuclear energy -- Standard method for testing the long-term alpha irradiation stability of matrices for solidification of high-level radioactive waste
ISO/IEC 29341-11-2:2008
Information technology -- UPnP Device Architecture -- Part 11-2: Quality of Service Device Control Protocol - Level 2 - Quality of Service Schemas
ISO 16552:2014
Heavy commercial vehicles and buses -- Stopping distance in straight-line braking with ABS -- Open loop and closed loop test methods
ISO 8216-99:2002
Petroleum products -- Fuels (class F) -- Classification -- Part 99: General
ISO 7403:1998
Aerospace -- Spline drives -- Wrenching configuration -- Metric series
ISO 245:1998
Aerospace -- Lockwire -- Diameters
ISO/IEC 11179-3:2013
Information technology -- Metadata registries (MDR) -- Part 3: Registry metamodel and basic attributes
ISO/TS 16976-8:2013
Respiratory protective devices -- Human factors -- Part 8: Ergonomic factors
ISO 3230:1998
Aerospace -- Rivets, solid, 100 degrees normal countersunk head with dome, metallic material, with or without surface treatment -- Dimensions
ISO/IEC 29341-13-10:2008
Information technology -- UPnP Device Architecture -- Part 13-10: Device Security Device Control Protocol - Device Security Service
ISO 14388-2:2014
Soil quality -- Acid-base accounting procedure for acid sulfate soils -- Part 2: Chromium reducible sulfur (CRS) methodology
ISO 2295:1974
Avocados -- Guide for storage and transport
ISO 21593:2019
Ships and marine technology -- Technical requirements for dry-disconnect/connect couplings for bunkering liquefied natural gas
ISO 7685:2019
Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of initial ring stiffness
ISO 10062:2006
Corrosion tests in artificial atmosphere at very low concentrations of polluting gas(es)
ISO 6035:1983
Cinematography -- Viewing conditions for the evaluation of films and slides for television -- Colours, luminances and dimensions
ISO 15483:1999
Cross recessed raised countersunk head drilling screws with tapping screw thread
ISO 11485-3:2014
Glass in building -- Curved glass -- Part 3: Requirements for curved tempered and curved laminated safety glass
ISO/TS 16460:2016
Intelligent transport systems -- Communications access for land mobiles (CALM) -- Communication protocol messages for global usage
ISO 15481:1999
Cross recessed pan head drilling screws with tapping screw thread
ISO 10766:2014
Hydraulic fluid power -- Cylinders -- Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
ISO 15482:1999
Cross recessed countersunk head drilling screws with tapping screw thread
ISO 12290:2000
Aerospace -- Rivets, solid, in titanium or titanium alloy -- Procurement specification
ISO/IEC 29167-1:2014
Information technology -- Automatic identification and data capture techniques -- Part 1: Security services for RFID air interfaces
ISO 8243:2013
Cigarettes -- Sampling
ISO 10362-2:2013
Cigarettes -- Determination of water in smoke condensates -- Part 2: Karl Fischer method
ISO 9374-3:2014
Cranes -- Information to be provided for enquiries, orders, offers and supply -- Part 3: Tower cranes
ISO 2538-1:2014
Geometrical product specifications (GPS) -- Wedges -- Part 1: Series of angles and slopes
ISO 14619:2003
Space systems -- Space experiments -- General requirements
ISO 15841:2014
Dentistry -- Wires for use in orthodontics
ISO 15028:2014
Plastics -- Aromatic isocyanates for use in the production of polyurethanes -- Determination of hydrolysable chlorine
ISO 25761:2014
Plastics -- Polyols for use in the production of polyurethanes -- Determination of basicity (total amine value), expressed as percent nitrogen
ISO 16165:2013
Ships and marine technology -- Marine environment protection -- Terminology relating to oil spill response
ISO 20906:2009
Acoustics -- Unattended monitoring of aircraft sound in the vicinity of airports
ISO 24113:2019
Space systems -- Space debris mitigation requirements
ISO 7627-3:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 3: Determination of cobalt, iron, manganese and nickel in contents from 0,01 to 0,5 % (m/m)
ISO 6743-1:2002
Lubricants, industrial oils and related products (class L) -- Classification -- Part 1: Family A (Total loss systems)
ISO 6743-99:2002
Lubricants, industrial oils and related products (class L) -- Classification -- Part 99: General
ISO 16665:2014
Water quality -- Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna
ISO 7627-1:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 1: General requirements
ISO 7627-2:1983
Hardmetals -- Chemical analysis by flame atomic absorption spectrometry -- Part 2: Determination of calcium, potassium, magnesium and sodium in contents from 0,001 to 0,02 % (m/m)
ISO 7176-22:2014
Wheelchairs -- Part 22: Set-up procedures
ISO 12256:2002
Aerospace -- Drives, internal, cruciform, ribbed -- Metric series
ISO 15638-6:2014
Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 6: Regulated applications
ISO 10664:2014
Hexalobular internal driving feature for bolts and screws
ISO 18747-2:2019
Determination of particle density by sedimentation methods -- Part 2: Multi-velocity approach
ISO 17401:2004
Space systems -- Spacecraft interface requirements document for launch vehicle services
ISO/IEC 11976:2008
Information technology -- Data interchange on 130 mm rewritable and write-once-read-many ultra density optical (UDO) disk cartridges -- Capacity: 60 Gbytes per cartridge -- Second generation
ISO 5797:2004
Ships and marine technology -- Windows and side scuttles for fire-resistant constructions
ISO 19905-3:2017
Petroleum and natural gas industries -- Site-specific assessment of mobile offshore units -- Part 3: Floating unit
ISO 6978-2:2003
Natural gas -- Determination of mercury -- Part 2: Sampling of mercury by amalgamation on gold/platinum alloy
ISO 14344:2010
Welding consumables -- Procurement of filler materials and fluxes
ISO 14279:2002
Aerospace -- Drives, internal, cruciform -- Metric series
ISO Guide 33:2015
Reference materials -- Good practice in using reference materials
ISO 1051:1999
Rivet shank diameters
ISO 3797:1976
Shipbuilding -- Vertical steel ladders
ISO 14385-2:2014
Stationary source emissions -- Greenhouse gases -- Part 2: Ongoing quality control of automated measuring systems
ISO 14385-1:2014
Stationary source emissions -- Greenhouse gases -- Part 1: Calibration of automated measuring systems
ISO 14280:2002
Aerospace -- Drivers, ribbed, for internal cruciform ribbed or unribbed drives -- Metric series
ISO 5256:1985
Steel pipes and fittings for buried or submerged pipe lines -- External and internal coating by bitumen or coal tar derived materials
ISO 14281:2002
Aerospace -- Gauges, for internal cruciform ribbed or unribbed drives -- Metric series
ISO/IEC 29341-4-3:2008
Information technology -- UPnP Device Architecture -- Part 4-3: Audio Video Device Control Protocol - Level 2 - Media Server Device
ISO 13803:2014
Paints and varnishes -- Determination of haze on paint films at 20 degrees
ISO/IEC 20944-3:2013
Information technology -- Metadata Registries Interoperability and Bindings (MDR-IB) -- Part 3: API bindings
ISO 24370:2005
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method
ISO/IEC 20944-1:2013
Information technology -- Metadata Registries Interoperability and Bindings (MDR-IB) -- Part 1: Framework, common vocabulary, and common provisions for conformance
ISO 7435:1983
Slotted set screws with long dog point
ISO/IEC 20944-2:2013
Information technology -- Metadata Registries Interoperability and Bindings (MDR-IB) -- Part 2: Coding bindings
ISO 7436:1983
Slotted set screws with cup point
ISO 13787:2003
Thermal insulation products for building equipment and industrial installations -- Determination of declared thermal conductivity
ISO 6659:1981
Sweet pepper -- Guide to refrigerated storage and transport
ISO 7434:1983
Slotted set screws with cone point
ISO 13414:1997
Aerospace -- Airframe needle roller bearings, single-row, shielded -- Inch series
ISO 15860:2006
Space systems -- Gas contamination -- Measurement methods for field tests
ISO 16063-42:2014
Methods for the calibration of vibration and shock transducers -- Part 42: Calibration of seismometers with high accuracy using acceleration of gravity
ISO 3046-1:2002
Reciprocating internal combustion engines -- Performance -- Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods -- Additional requirements for engines for general use
ISO 16251-1:2014
Acoustics -- Laboratory measurement of the reduction of transmitted impact noise by floor coverings on a small floor mock-up -- Part 1: Heavyweight compact floor
ISO 14869-2:2002
Soil quality -- Dissolution for the determination of total element content -- Part 2: Dissolution by alkaline fusion
IEC 80601-2-78:2019
Medical electrical equipment -- Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation
IEC 80601-2-77:2019
Medical electrical equipment -- Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment
ISO 5667-11:2009
Water quality -- Sampling -- Part 11: Guidance on sampling of groundwaters
ISO 8459:2009
Information and documentation -- Bibliographic data element directory for use in data exchange and enquiry
ISO 5019-6:2005
Refractory bricks -- Dimensions -- Part 6: Basic bricks for oxygen steel-making converters
ISO 26868:2009
Space data and information transfer systems -- Image data compression
ISO 23065:2009
Milk fat from enriched dairy products -- Determination of omega-3 and omega-6 fatty acid content by gas-liquid chromatography
ISO 15516:2006
Ships and marine technology -- Launching appliances for davit-launched lifeboats
ISO 13374-1:2003
Condition monitoring and diagnostics of machines -- Data processing, communication and presentation -- Part 1: General guidelines
ISO 9128:2006
Road vehicles -- Graphical symbols to designate brake fluid types
ISO 17299-1:2014
Textiles -- Determination of deodorant property -- Part 1: General principle
ISO 11782-1:1998
Corrosion of metals and alloys -- Corrosion fatigue testing -- Part 1: Cycles to failure testing
ISO 17299-3:2014
Textiles -- Determination of deodorant property -- Part 3: Gas chromatography method
ISO 17299-2:2014
Textiles -- Determination of deodorant property -- Part 2: Detector tube method
ISO 5779:1987
Shipbuilding -- Ordinary rectangular windows -- Positioning
ISO 15864:2004
Space systems -- General test methods for space craft, subsystems and units
ISO 5780:1987
Shipbuilding -- Side scuttles -- Positioning
ISO/IEC TS 20013:2015
Information technology for learning, education and training -- A reference framework of e-Portfolio information
ISO 8723:1986
Carbonaceous materials for the production of aluminium -- Calcined coke -- Determination of oil content -- Method by solvent extraction
ISO 19378:2003
Lubricants, industrial oils and related products (class L) -- Machine-tool lubricants -- Categories and specifications
ISO 13203:2005
Chains, sprockets and accessories -- List of equivalent terms
ISO 7606:1988
Shipbuilding -- Inland navigation vessels -- Draught scales
ISO 7203-2:2019
Fire extinguishing media -- Foam concentrates -- Part 2: Specification for medium- and high-expansion foam concentrates for top application to water-immiscible liquids
ISO 8004:1985
Carbonaceous materials for the production of aluminium -- Calcined coke and calcined carbon products -- Determination of the density in xylene -- Pyknometric method
ISO 7203-1:2019
Fire extinguishing media -- Foam concentrates -- Part 1: Specification for low-expansion foam concentrates for top application to water-immiscible liquids
ISO 8003:1985
Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Measurement of dynamic viscosity
ISO 20652:2006
Space data and information transfer systems -- Producer-archive interface -- Methodology abstract standard
ISO 7203-3:2019
Fire extinguishing media -- Foam concentrates -- Part 3: Specification for low-expansion foam concentrates for top application to water-miscible liquids
ISO/TS 23893-2:2007
Water quality -- Biochemical and physiological measurements on fish -- Part 2: Determination of ethoxyresorufin-O-deethylase (EROD)
ISO 15536-1:2005
Ergonomics -- Computer manikins and body templates -- Part 1: General requirements
ISO 7214:2012
Cellular plastics -- Polyethylene -- Methods of test
ISO 230-10:2016
Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools
ISO 10669:1999
Plain washers for tapping screw and washer assemblies -- Normal and large series -- Product grade A
ISO/TS 13530:2009
Water quality -- Guidance on analytical quality control for chemical and physicochemical water analysis
ISO 8006:1985
Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of ash
ISO 8790:1987
Information processing systems -- Computer system configuration diagram symbols and conventions
ISO 10666:1999
Drilling screws with tapping screw thread -- Mechanical and functional properties
ISO/IEC 24751-1:2008
Information technology -- Individualized adaptability and accessibility in e-learning, education and training -- Part 1: Framework and reference model
ISO 15586:2003
Water quality -- Determination of trace elements using atomic absorption spectrometry with graphite furnace
ISO 21755-1:2019
Motorcycles -- Measurement method for evaporative emissions -- Part 1: SHED test procedure
ISO/IEC 20944-5:2013
Information technology -- Metadata Registries Interoperability and Bindings (MDR-IB) -- Part 5: Profiles
ISO/TS 13899-1:2004
Steel -- Determination of Mo, Nb and W contents in alloyed steel -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: Determination of Mo content
ISO/IEC 20944-4:2013
Information technology -- Metadata Registries Interoperability and Bindings (MDR-IB) -- Part 4: Protocol bindings
ISO 21648:2008
Space systems -- Flywheel module design and testing
ISO 5841-2:2014
Implants for surgery -- Cardiac pacemakers -- Part 2: Reporting of clinical performance of populations of pulse generators or leads
ISO 13216-2:2004
Road vehicles -- Anchorages in vehicles and attachments to anchorages for child restraint systems -- Part 2: Top tether anchorages and attachments
ISO 8999:2001
Reciprocating internal combustion engines -- Graphical symbols
ISO 14356:2003
Dentistry -- Duplicating material
ISO 22632:2019
Adhesives -- Test methods for adhesives for floor and wall coverings -- Shear test
ISO 22631:2019
Adhesives -- Test methods for adhesives for floor and wall coverings -- Peel test
ISO 9089:2019
Marine structures -- Mobile offshore units -- Mooring positioning windlasses and winches
ISO 4928:2006
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (Service temperature 120 degrees C max.)
ISO 6118:2006
Road vehicles -- Elastomeric cups and seals for cylinders for hydraulic braking systems using a non-petroleum base hydraulic brake fluid (service temperature 70 degrees C max.)
ISO 7335:1987
Iron ores -- Determination of combined water content -- Karl Fischer titrimetric method
ISO 6000:1981
Round-headed cabbage -- Storage in the open
ISO 14857:2014
Thermal performance in the built environment -- Determination of air permeance of building materials
ISO/TR 22770:2019
Preparation of steel substrates before application of paints and related products -- Analytical colorimetry method to support visual assessment of surface preparation grades
ISO 6974-6:2002
Natural gas -- Determination of composition with defined uncertainty by gas chromatography -- Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
ISO/IEC 17811-3:2014
Information Technology -- Device control and management -- Part 3: Specification of Reliable Message Delivery Protocol
ISO/IEC 15149-1:2014
Information technology -- Telecommunications and information exchange between systems -- Magnetic field area network (MFAN) -- Part 1: Air interface
ISO 3400:1997
Cigarettes -- Determination of alkaloids in smoke condensates -- Spectrometric method
ISO 17381:2003
Water quality -- Selection and application of ready-to-use test kit methods in water analysis
ISO 13903:2005
Animal feeding stuffs -- Determination of amino acids content
ISO 10628-1:2014
Diagrams for the chemical and petrochemical industry -- Part 1: Specification of diagrams
ISO 6630:1986
Documentation -- Bibliographic control characters
ISO 9088:1997
Carbonaceous materials used for the production of aluminium -- Cathode blocks and prebaked anodes -- Determination of the density in xylene by a pyknometric method
ISO 6791:1981
Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of contents of quinoline-insoluble material
ISO 10551:2019
Ergonomics of the physical environment -- Subjective judgement scales for assessing physical environments
ISO/TS 12927:1999
Lubricants, industrial oils and related products (class L) -- Family M (Metalworking) -- Guidelines for establishing specifications
ISO 14314:2004
Reciprocal internal combustion engines -- Recoil starting equipment -- General safety requirements
ISO 14309:2019
Rubber, vulcanized or thermoplastic -- Determination of volume and/or surface resistivity
ISO 14396:2002
Reciprocating internal combustion engines -- Determination and method for the measurement of engine power -- Additional requirements for exhaust emission tests in accordance with ISO 8178
ISO 22637:2019
Adhesives -- Test of adhesive for floor covering -- Determination of the electrical resistance of adhesive films and composites
ISO 389-5:2006
Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz
ISO 10059-2:2003
Dense, shaped refractory products -- Determination of cold compressive strength -- Part 2: Test with packing
ISO 8124-2:2014
Safety of toys -- Part 2: Flammability
ISO 18436-4:2014
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 4: Field lubricant analysis
ISO 15265:2004
Ergonomics of the thermal environment -- Risk assessment strategy for the prevention of stress or discomfort in thermal working conditions
ISO 24504:2014
Ergonomics -- Accessible design -- Sound pressure levels of spoken announcements for products and public address systems
ISO 8752:2009
Spring-type straight pins -- Slotted, heavy duty
ISO 18436-7:2014
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 7: Thermography
ISO 13337:2009
Spring-type straight pins -- Slotted, light duty
ISO 16336:2014
Applications of statistical and related methods to new technology and product development process -- Robust parameter design (RPD)
ISO 23812:2009
Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for depth calibration for silicon using multiple delta-layer reference materials
ISO 10075-3:2004
Ergonomic principles related to mental workload -- Part 3: Principles and requirements concerning methods for measuring and assessing mental workload
ISO 15709:2002
Soil quality -- Soil water and the unsaturated zone -- Definitions, symbols and theory
ISO 9869-1:2014
Thermal insulation -- Building elements -- In-situ measurement of thermal resistance and thermal transmittance -- Part 1: Heat flow meter method
ISO/TS 12928:1999
Lubricants, industrial oils and related products (class L) -- Family R (Products for temporary protection against corrosion) - Guidelines for establishing specifications
ISO 8092-2:2005
Road vehicles -- Connections for on-board electrical wiring harnesses -- Part 2: Definitions, test methods and general performance requirements
ISO 22635:2019
Adhesives -- Test methods for adhesives for plastic or rubber floor coverings or wall coverings -- Determination of dimensional changes after accelerated ageing
ISO/IEC 29341-5-1:2008
Information technology -- UPnP Device Architecture -- Part 5-1: Digital Security Camera Device Control Protocol - Digital Security Camera Device
ISO 11649:2009
Financial services -- Core banking -- Structured creditor reference to remittance information
ISO 13998:2003
Protective clothing -- Aprons, trousers and vests protecting against cuts and stabs by hand knives
ISO/IEC 29341-5-12:2008
Information technology -- UPnP Device Architecture -- Part 5-12: Digital Security Camera Device Control Protocol - Digital Security Camera Still Image Service
ISO 13486-1:1999
Road vehicles -- Hydraulic braking systems -- Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
ISO 3012:1999
Petroleum products -- Determination of thiol (mercaptan) sulfur in light and middle distillate fuels -- Potentiometric method
ISO 11866-1:2005
Milk and milk products -- Enumeration of presumptive Escherichia coli -- Part 1: Most probable number technique using 4-methylumbelliferyl-beta-D-glucuronide (MUG)
ISO 11866-2:2005
Milk and milk products -- Enumeration of presumptive Escherichia coli -- Part 2: Colony-count technique at 44 degrees C using membranes
ISO 22608:2004
Protective clothing -- Protection against liquid chemicals -- Measurement of repellency, retention, and penetration of liquid pesticide formulations through protective clothing materials
ISO 9606-2:2004
Qualification test of welders -- Fusion welding -- Part 2: Aluminium and aluminium alloys
ISO 17080:2005
Manually portable agricultural and forestry machines and powered lawn and garden equipment -- Design principles for single-panel product safety labels
ISO 15681-1:2003
Water quality -- Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) -- Part 1: Method by flow injection analysis (FIA)
ISO 18436-6:2014
Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 6: Acoustic emission
ISO 20774:2013
Cigarettes -- Determination of carbon monoxide in sidestream smoke -- Method using a routine analytical linear smoking machine equipped with a fishtail chimney
ISO 20773:2013
Cigarettes -- Determination of nicotine-free dry particulate matter and nicotine in sidestream smoke -- Method using a routine analytical linear smoking machine equipped with a fishtail chimney
ISO 6743-13:2002
Lubricants, industrial oils and related products (class L) -- Classification -- Part 13: Family G (Slideways)
ISO/TS 10832:2009
Soil quality -- Effects of pollutants on mycorrhizal fungi -- Spore germination test
ISO 8686-4:2005
Cranes -- Design principles for loads and load combinations -- Part 4: Jib cranes
ISO 16000-9:2006
Indoor air -- Part 9: Determination of the emission of volatile organic compounds from building products and furnishing -- Emission test chamber method
ISO/IEC 29341-6-11:2008
Information technology -- UPnP Device Architecture -- Part 6-11: Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan Operating Mode Service
ISO 9964-1:1993
Water quality -- Determination of sodium and potassium -- Part 1: Determination of sodium by atomic absorption spectrometry
ISO 10245-4:2004
Cranes -- Limiting and indicating devices -- Part 4: Jib cranes
ISO 16000-11:2006
Indoor air -- Part 11: Determination of the emission of volatile organic compounds from building products and furnishing -- Sampling, storage of samples and preparation of test specimens
ISO 105-F10:1989
Textiles -- Tests for colour fastness -- Part F10: Specification for adjacent fabric: Multifibre
ISO/IEC 29341-6-10:2008
Information technology -- UPnP Device Architecture -- Part 6-10: Heating, Ventilation, and Air Conditioning Device Control Protocol - Control Valve Service
ISO/IEC 29341-6-12:2008
Information technology -- UPnP Device Architecture -- Part 6-12: Heating, Ventilation, and Air Conditioning Device Control Protocol - Fan Speed Service
ISO 8890:1988
Dense shaped refractory products -- Determination of resistance to sulfuric acid
ISO 9964-3:1993
Water quality -- Determination of sodium and potassium -- Part 3: Determination of sodium and potassium by flame emission spectrometry
ISO/IEC 29341-7-1:2008
Information technology -- UPnP Device Architecture -- Part 7-1: Lighting Device Control Protocol - Binary Light Device
ISO/IEC 29341-6-16:2008
Information technology -- UPnP Device Architecture -- Part 6-16: Heating, Ventilation, and Air Conditioning Device Control Protocol - Temperature Setpoint Service
ISO/IEC 29341-6-17:2008
Information technology -- UPnP Device Architecture -- Part 6-17: Heating, Ventilation, and Air Conditioning Device Control Protocol - User Operating Mode Service
ISO 22241-5:2019
Diesel engines -- NOx reduction agent AUS 32 -- Part 5: Refilling interface for passenger cars
ISO 5866:1983
Aircraft -- 2 and 3A plug-in base change-over relays, Type II, with crimped connections -- Clearance and fixing dimensions
ISO 9964-2:1993
Water quality -- Determination of sodium and potassium -- Part 2: Determination of potassium by atomic absorption spectrometry
ISO 9407:2019
Footwear sizing -- Mondopoint system of sizing and marking
ISO 22478:2006
Water quality -- Determination of certain explosives and related compounds -- Method using high-performance liquid chromatography (HPLC) with UV detection
ISO 9986:2014
Composition cork for shoe outsoles
ISO 20508:2003
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of light transmittance of ceramic films with transparent substrate
ISO 16784-2:2006
Corrosion of metals and alloys -- Corrosion and fouling in industrial cooling water systems -- Part 2: Evaluation of the performance of cooling water treatment programmes using a pilot-scale test rig
ISO 20079:2005
Water quality -- Determination of the toxic effect of water constituents and waste water on duckweed (Lemna minor) -- Duckweed growth inhibition test
ISO 10816-7:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts
ISO 1920-9:2009
Testing of concrete -- Part 9: Determination of creep of concrete cylinders in compression
ISO 1920-8:2009
Testing of concrete -- Part 8: Determination of drying shrinkage of concrete for samples prepared in the field or in the laboratory
ISO 14657:2005
Zinc-coated steel for the reinforcement of concrete
ISO 9612:2009
Acoustics -- Determination of occupational noise exposure -- Engineering method
ISO/IEC 11179-6:2015
Information technology -- Metadata registries (MDR) -- Part 6: Registration
ISO 22643:2003
Space data and information transfer systems -- Data entity dictionary specification language (DEDSL) -- XML/DTD Syntax
ISO 8253-2:2009
Acoustics -- Audiometric test methods -- Part 2: Sound field audiometry with pure-tone and narrow-band test signals
ISO 2469:2014
Paper, board and pulps -- Measurement of diffuse radiance factor (diffuse reflectance factor)
ISO/IEC 29341-8-3:2008
Information technology -- UPnP Device Architecture -- Part 8-3: Internet Gateway Device Control Protocol - Wide Area Network Device
ISO/IEC 29341-8-4:2008
Information technology -- UPnP Device Architecture -- Part 8-4: Internet Gateway Device Control Protocol - Wide Area Network Connection Device.