ISO/TS 21139-1:2019

Permanence and durability of commercial prints -- Part 1: Definition of use profiles and guiding principles for specifications

ISO 8178-1:2017

Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 1: Test-bed measurement systems of gaseous and particulate emissions

ISO 10426-3:2019

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 3: Testing of deepwater well cement formulations

ISO/IEC GUIDE 63:2019

Guide to the development and inclusion of aspects of safety in International Standards for medical devices

ISO/TS 13972:2015

Health informatics -- Detailed clinical models, characteristics and processes

ISO 28981:2009

Mopeds - Methods for setting the running resistance on a chassis dynamometer

ISO/TS 10303-1025:2011

Industrial automation systems and integration -- Product data representation and exchange -- Part 1025: Application module: Alias identification

ISO/TS 10303-1005:2018

Industrial automation systems and integration -- Product data representation and exchange -- Part 1005: Application module: Elemental topology

ISO 1268-4:2005

Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs

ISO/IEC 9995-7:2009

Information technology -- Keyboard layouts for text and office systems -- Part 7: Symbols used to represent functions

ISO 8562:1990

Cycles -- Stem wedge angle

ISO/TS 11633-1:2019

Health informatics -- Information security management for remote maintenance of medical devices and medical information systems -- Part 1: Requirements and risk analysis

ISO/TS 10303-1374:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1374: Application module: Analysis shape

ISO/IEC 21000-22:2019

Information technology -- Multimedia framework (MPEG-21) -- Part 22: User Description

ISO 15663-1:2000

Petroleum and natural gas industries -- Life cycle costing -- Part 1: Methodology

ISO 4427-5:2019

Plastics piping systems for water supply, and for drainage and sewerage under pressure -- Polyethylene (PE) -- Part 5: Fitness for purpose of the system

ISO 4427-2:2019

Plastics piping systems for water supply, and for drainage and sewerage under pressure -- Polyethylene (PE) -- Part 2: Pipes

ISO 4427-3:2019

Plastics piping systems for water supply, and for drainage and sewerage under pressure -- Polyethylene (PE) -- Part 3: Fittings

ISO 15663-2:2001

Petroleum and natural gas industries -- Life-cycle costing -- Part 2: Guidance on application of methodology and calculation methods

ISO 4427-1:2019

Plastics piping systems for water supply and for drainage and sewerage under pressure -- Polyethylene (PE) -- Part 1: General

ISO 15663-3:2001

Petroleum and natural gas industries -- Life-cycle costing -- Part 3: Implementation guidelines

ISO/ASTM 51276:2019

Practice for use of a polymethylmethacrylate dosimetry system

ISO 5167-1:2003

Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 1: General principles and requirements

ISO 3324-1:2013

Aircraft tyres and rims -- Part 1: Specifications

ISO 13007-4:2013

Ceramic tiles -- Grouts and adhesives -- Part 4: Test methods for grouts

ISO 3324-2:2013

Aircraft tyres and rims -- Part 2: Test methods for tyres

ISO 13007-2:2013

Ceramic tiles -- Grouts and adhesives -- Part 2: Test methods for adhesives

ISO/IEC 19775-1:2013

Information technology -- Computer graphics, image processing and environmental data representation -- Extensible 3D (X3D) -- Part 1: Architecture and base components

ISO 10973:1995

Cranes -- Spare parts manual

ISO/IEC 9995-3:2010

Information technology -- Keyboard layouts for text and office systems -- Part 3: Complementary layouts of the alphanumeric zone of the alphanumeric section

ISO 7905-2:1995

Plain bearings -- Bearing fatigue -- Part 2: Test with a cylindrical specimen of a metallic bearing material

ISO/IEC TR 23091-4:2019

Information technology -- Coding-independent code points -- Part 4: Usage of video signal type code points

ISO 4433-1:1997

Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 1: Immersion test method

ISO/TS 21177:2019

Intelligent transport systems -- ITS station security services for secure session establishment and authentication between trusted devices

ISO/TR 11583:2012

Measurement of wet gas flow by means of pressure differential devices inserted in circular cross-section conduits

ISO 8533:2019

Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of cemented or wrapped joints

ISO 21391:2019

Nuclear criticality safety -- Geometrical dimensions for subcriticality control -- Equipment and layout

ISO 11007:1997

Petroleum products and lubricants -- Determination of rust-prevention characteristics of lubricating greases

ISO/TS 10303-1112:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1112: Application module: Specification control

ISO 10545-9:2013

Ceramic tiles -- Part 9: Determination of resistance to thermal shock

ISO/TR 10946:2019

Hydraulic fluid power -- Gas-loaded accumulators with separator -- Selection of preferred hydraulic ports

ISO 16035:2003

Animal and vegetable fats and oils -- Determination of low-boiling halogenated hydrocarbons in edible oils

ISO 19903:2019

Petroleum and natural gas industries -- Concrete offshore structures

ISO/IEC 24770-5:2019

Information technology --Real-time locating system (RTLS) device performance test methods -- Part 5: Test methods for chirp spread spectrum (CSS) air interface

ISO 16840-3:2014

Wheelchair seating -- Part 3: Determination of static, impact and repetitive load strengths for postural support devices

ISO 15537:2004

Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs

ISO 10123:2013

Adhesives -- Determination of shear strength of anaerobic adhesives using pin-and-collar specimens

ISO/TS 10303-1523:2018

Industrial automation systems and integration -- Product data representation and exchange -- Part 1523: Application module: Shape data quality criteria

ISO 9393-1:2004

Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 1: General

ISO 10878:2013

Non-destructive testing -- Infrared thermography -- Vocabulary

ISO/IEC 19777-1:2006

Information technology -- Computer graphics and image processing -- Extensible 3D (X3D) language bindings -- Part 1: ECMAScript

ISO/TS 10303-1402:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 1402: Application module: Same as external item

ISO 8483:2019

Glass-reinforced thermosetting plastics (GRP) pipes and fittings -- Test methods to prove the design of bolted flange joints

ISO/IEC 11072:1992

Information technology -- Computer graphics -- Computer Graphics Reference Model

ISO/TR 9464:2008

Guidelines for the use of ISO 5167:2003

ISO/TS 19264-1:2017

Photography -- Archiving systems -- Image quality analysis -- Part 1: Reflective originals

ISO/TR 12767:2007

Measurement of fluid flow by means of pressure differential devices -- Guidelines on the effect of departure from the specifications and operating conditions given in ISO 5167

ISO/TS 25138:2019

Surface chemical analysis -- Analysis of metal oxide films by glow-discharge optical-emission spectrometry

ISO 8178-4:2017

Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 4: Steady-state and transient test cycles for different engine applications

ISO 3233-2:2019

Paints and varnishes -- Determination of the percentage volume of non-volatile matter -- Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes' principle

ISO 19898:2019

Ships and marine technology -- Life-saving appliances and arrangements -- Means of recovery of persons

ISO 5167-4:2003

Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 4: Venturi tubes

ISO 21194:2019

Elastic adhesives -- Testing of adhesively bonded joints -- Bead peel test

ISO/IEC 27701:2019

Security techniques -- Extension to ISO/IEC 27001 and ISO/IEC 27002 for privacy information management -- Requirements and guidelines

ISO 5167-2:2003

Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 2: Orifice plates

ISO/IEC TR 29106:2007/AMD 2:2019

ISO 9409-1:2004

Manipulating industrial robots -- Mechanical interfaces -- Part 1: Plates

ISO 14341:2010

Welding consumables -- Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels -- Classification

ISO 19072-4:2019

Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 4: Pyrotechnic device and harness connector assembly - type 2

ISO 21416:2019

Recreational diving services -- Requirements and guidance on environmentally sustainable practices in recreational diving

ISO 20896-1:2019

Dentistry -- Digital impression devices -- Part 1: Methods for assessing accuracy

ISO 4433-2:1997

Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 2: Polyolefin pipes

ISO 21417:2019

Recreational diving services -- Requirements for training on environmental awareness for recreational divers

ISO/TS 10303-1127:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1127: Application module: File identification

ISO 5263-1:2004

Pulps -- Laboratory wet disintegration -- Part 1: Disintegration of chemical pulps

ISO 20884:2019

Petroleum products -- Determination of sulfur content of automotive fuels -- Wavelength-dispersive X-ray fluorescence spectrometry

ISO 5263-2:2004

Pulps -- Laboratory wet disintegration -- Part 2: Disintegration of mechanical pulps at 20 degrees C

ISO 20846:2019

Petroleum products -- Determination of sulfur content of automotive fuels -- Ultraviolet fluorescence method

ISO 3384-2:2019

Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 2: Testing with temperature cycling

ISO/TS 16843-2:2015

Health informatics -- Categorial structures for representation of acupuncture -- Part 2: Needling

ISO 13617:2019

Ships and marine technology -- Shipboard incinerators -- Requirements

ISO/IEC 23009-1:2019

Information technology -- Dynamic adaptive streaming over HTTP (DASH) -- Part 1: Media presentation description and segment formats

ISO 19444-1:2019

Document management -- XML Forms Data Format -- Part 1: Use of ISO 32000-2 (XFDF 3.0)

ISO/TS 10303-1836:2018

Industrial automation systems and integration -- Product data representation and exchange -- Part 1836: Application module: Vertex colours for tessellated geometry

ISO 12614-6:2014

Road vehicles -- Liquefied natural gas (LNG) fuel system components -- Part 6: Pressure regulator

ISO/IEC 12089:1997

Information technology -- Computer graphics and image processing -- Encoding for the Image Interchange Facility (IIF)

ISO 4129:2012

Road vehicles -- Mopeds -- Symbols for controls, indicators and tell-tales

ISO 37158:2019

Smart community infrastructures -- Smart transportation using battery-powered buses for passenger services

ISO 30023:2010

Textiles -- Qualification symbols for labelling workwear to be industrially laundered

ISO 17515-3:2019

Intelligent transport systems -- Evolved-universal terrestrial radio access network -- Part 3: LTE-V2X

ISO 3384-1:2019

Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 1: Testing at constant temperature

ISO 19380:2019

Heavy commercial vehicles and buses -- Centre of gravity measurements -- Axle lift, tilt-table and stable pendulum test methods

ISO/TS 10303-1383:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1383: Application module: Finite elements

ISO 12233:2017

Photography -- Electronic still picture imaging -- Resolution and spatial frequency responses

ISO 20069:2019

Guidance for assessment and evaluation of changes to drug delivery systems

ISO 16900-1:2019

Respiratory protective devices -- Methods of test and test equipment -- Part 1: Determination of inward leakage

ISO/TR 21555:2019

Paints and varnishes - Overview of test methods on hardness and wear resistance of coatings

ISO/TS 10303-1765:2018

Industrial automation systems and integration -- Product data representation and exchange -- Part 1765: Application module: Characterizable object

ISO 2560:2009

Welding consumables -- Covered electrodes for manual metal arc welding of non-alloy and fine grain steels -- Classification

ISO 13003:2003

Fibre-reinforced plastics -- Determination of fatigue properties under cyclic loading conditions

ISO/TS 10303-1231:2018

Industrial automation systems and integration -- Product data representation and exchange -- Part 1231: Application module: Product data management

ISO/TS 10303-1469:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 1469: Application module: Foundation state definition

ISO/TS 10303-1790:2018

Industrial automation systems and integration -- Product data representation and exchange -- Part 1790: Application module: Parameterization and variational representation

ISO 9095:1990

Steel tubes -- Continuous character marking and colour coding for material identification

ISO/TR 19300:2015

Graphic technology -- Guidelines for the use of standards for print media production

ISO/TR 13195:2015

Selected illustrations of response surface method -- Central composite design

ISO 20779:2018/AMD 1:2019

ISO 20233-2:2019

Ships and marine technology -- Model test method for propeller cavitation noise evaluation in ship design -- Part 2: Noise source localization

ISO 9926-1:1990

Cranes -- Training of drivers -- Part 1: General

ISO 898-2:2012

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 2: Nuts with specified property classes -- Coarse thread and fine pitch thread

ISO/IEC 15961-2:2019

Information technology -- Data protocol for radio frequency identification (RFID) for item management -- Part 2: Registration of RFID data constructs

ISO/IEC 27102:2019

Information security management -- Guidelines for cyber-insurance

ISO 21253-2:2019

Water quality -- Multi-compound class methods -- Part 2: Criteria for the quantitative determination of organic substances using a multi-compound class analytical method

ISO 18807:2019

Tyres and rims for logging and forestry service

ISO 21253-1:2019

Water quality -- Multi-compound class methods -- Part 1: Criteria for the identification of target compounds by gas and liquid chromatography and mass spectrometry

ISO 4433-3:1997

Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes

ISO 4433-4:1997

Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 4: Poly(vinylidene fluoride) (PVDF) pipes

ISO 18393-1:2012

Thermal insulation products -- Determination of ageing by settlement -- Part 1: Blown loose-fill insulation for ventilated attics

ISO/TR 29901:2007/COR 1:2009

ISO/TS 10303-1739:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 1739: Application module: Production rule

ISO/TS 14256-1:2003

Soil quality -- Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution -- Part 1: Manual method

ISO 12491:1997

Statistical methods for quality control of building materials and components

ISO 12210-4:1998

Cranes -- Anchoring devices for in-service and out-of-service conditions -- Part 4: Jib cranes

ISO 25119-2:2019

Tractors and machinery for agriculture and forestry -- Safety-related parts of control systems -- Part 2: Concept phase

ISO 24034:2010

Welding consumables -- Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys -- Classification

ISO 6218:2019

Inland navigation vessels -- Manually- and power-operated coupling devices for rope connections of pushing units and coupled vessels -- Safety requirements and main dimensions

ISO 20909:2019

Radio frequency identification (RFID) tyre tags

ISO 14548:1998

Photography -- Dimensions of glass plates

ISO/IEC 9075-11:2016/COR 1:2019

ISO 20395:2019

Biotechnology -- Requirements for evaluating the performance of quantification methods for nucleic acid target sequences -- qPCR and dPCR

ISO/IEC 23091-2:2019

Information technology -- Coding-independent code points -- Part 2: Video

ISO 20910:2019

Coding for radio frequency identification (RFID) tyre tags

ISO/TS 20460:2015

Paper and board -- Automated on-line testing -- Metrological comparability between standardized measurements and output of on-line gauges

ISO 21173:2019

Submersibles -- Hydrostatic pressure test -- Pressure hull and buoyancy materials

ISO/IEC 23005-3:2019

Information technology -- Media context and control -- Part 3: Sensory information

ISO/IEC 9995-11:2015

Information technology -- Keyboard layouts for office systems -- Part 11: Functionality of dead keys and repertoires of characters entered by dead keys

ISO 17872:2019

Paints and varnishes -- Guidelines for the introduction of scribe marks through coatings on metallic panels for corrosion testing

ISO 3085:2019

Iron ores -- Experimental methods for checking the precision of sampling, sample preparation and measurement

ISO 14487:1997

Pulps -- Standard water for physical testing

ISO 20714:2019

E-liquid -- Determination of nicotine, propylene glycol and glycerol in liquids used in electronic nicotine delivery devices -- Gas chromatographic method

ISO 5209:2019

General purpose industrial valves -- Marking

ISO 16840-10:2014

Wheelchairs -- Resistance to ignition of non-integrated seat and back support cushions -- Part 10: Requirements and test methods

ISO 4164:2012

Mopeds -- Engine test code -- Net power

ISO 6005:2019

Alpine skis -- Ski binding screws -- Test methods

ISO 12478-1:1997

Cranes -- Maintenance manual -- Part 1: General

 ISO 13127:2012

Packaging -- Child resistant packaging -- Mechanical test methods for reclosable child resistant packaging systems

ISO 22514-5:2019

Statistical methods in process management -- Capability and performance -- Part 5: Process capability estimates and performance for attributive characteristics

ISO 5264-1:1979

Pulps -- Laboratory beating -- Part 1: Valley beater method

ISO 15792-2:2000

welding consumables -- test methods -- part 2: preparation of single-run and two-run technique test specimens in steel

ISO/TS 22939:2019

soil quality -- measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates

ISO 15792-1:2000

welding consumables -- test methods -- part 1: test methods for all-weld metal test specimens in steel, nickel and nickel alloys