ISO 5636-6:2015

Paper and board — Determination of air permeance (medium range) — Part 6: Oken method

ISO 18321:2015

Essential oils — Determination of peroxide value

ISO 27567:2009

Laminated veneer lumber — Measurement of dimensions and shape — Method of test

ISO 3566:1976

Sodium fluoride primarily used for the production of aluminium — Determination of chlorides content — Turbidimetric method

ISO/TS 20428:2017

Health informatics — Data elements and their metadata for describing structured clinical genomic sequence information in electronic health records

ISO 17447-3:2015

Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 3: Tests and requirements

ISO 699:2015

Pulps — Determination of alkali resistance

ISO 3260:2015

Pulps — Determination of chlorine consumption (Degree of delignification)

ISO 11289:1993

Heat-processed foods in hermetically sealed containers — Determination of pH

ISO 7960:1995

Airborne noise emitted by machine tools — Operating conditions for woodworking machines

ISO 5390:1977

Compressors — Classification

IEC 61966-2-2:2003

Multimedia systems and equipment — Colour measurement and management — Part 2-2: Colour management — Extended RGB colour space — scRGB

ISO 15254:2009

Ophthalmic optics and instruments — Electro-optical devices for enhancing low vision

ISO/TS 10811-2:2000

Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 2: Classification

ISO 21988:2006

Abrasion-resistant cast irons — Classification

ISO 2892:2007

Austenitic cast irons — Classification

ISO/IEC 8348:2002

Information technology — Open Systems Interconnection — Network service definition

ISO/TS 10811-1:2000

Mechanical vibration and shock — Vibration and shock in buildings with sensitive equipment — Part 1: Measurement and evaluation

ISO 6497:2002

Animal feeding stuffs — Sampling

ISO 7967-5:2010

Reciprocating internal combustion engines — Vocabulary of components and systems — Part 5: Cooling systems

ISO 13379-2:2015

Condition monitoring and diagnostics of machines — Data interpretation and diagnostics techniques — Part 2: Data-driven applications

ISO 4715:1978

Essential oils — Quantitative evaluation of residue on evaporation

ISO/TS 4949:2016

Steel names based on letter symbols

ISO 105-B04:1994

Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test

ISO 20369:2009

Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products — Determination of citrate content

ISO 18619:2015

Image technology colour management — Black point compensation

ISO/TS 14837-31:2017

Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 31: Guideline on field measurements for the evaluation of human exposure in buildings

ISO 11545:2009

Agricultural irrigation equipment — Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles — Determination of uniformity of water distribution

ISO 5679:1979

Equipment for working the soil — Disks — Classification, main fixing dimensions and specifications

ISO 17456:2006

Plastics piping systems — Multilayer pipes — Determination of long-term strength

ISO 20370:2009

Material used for producing wrappings for cigarette filters, cigarettes and other tobacco products — Determination of acetate content

ISO 27528:2009

Wood-based panels — Determination of resistance to axial withdrawal of screws

ISO 10806:2003

Pipework — Fittings for corrugated metal hoses

IEC 62065:2002

Maritime navigation and radiocommunication equipment and systems — Track control systems — Operational and performance requirements, methods of testing and required test results

ISO 230-7:2015

Test code for machine tools — Part 7: Geometric accuracy of axes of rotation

ISO 4439:1979

Unplasticized polyvinyl chloride (PVC) pipes and fittings — Determination and specification of density

ISO 389-2:1994

Acoustics — Reference zero for the calibration of audiometric equipment — Part 2: Reference equivalent threshold sound pressure levels for pure tones and insert earphones

ISO 16861:2015

Petroleum products — Fuels (class F) — Specifications of dimethyl ether (DME)

ISO 11021:1999

Essential oils — Determination of water content — Karl Fischer method

ISO/IEC 11693-3:2015

Identification cards — Optical memory cards — Part 3: Authentication techniques

ISO 11023:1999

Liquorice extracts (Glycyrrhiza glabra L.) — Determination of glycyrrhizic acid content — Method using high-performance liquid chromatography

ISO 2404:1986

Cinematography — Six-track magnetic sound records on 70 mm striped release prints — Locations and dimensions

ISO 15379-2:2015

Carbonaceous materials for the production of aluminium — Cathode block materials — Part 2: Determination of the expansion due to sodium penetration without application of pressure

ISO 11016:1999

Oil of star anise, Chinese type (Illicium verum Hook. f.)

ISO 18674-1:2015

Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 1: General rules

ISO/IEC/IEEE 8802-22:2015

Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands

ISO 11999-1:2015

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 1: General

ISO 11999-3:2015

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 3: Clothing

ISO 4378-4:2009

Plain bearings — Terms, definitions, classification and symbols — Part 4: Basic symbols

ISO 4378-5:2009

Plain bearings — Terms, definitions, classification and symbols — Part 5: Application of symbols

ISO/IEC TS 25011:2017

Information technology — Systems and software Quality Requirements and Evaluation (SQuaRE) — Service quality models

ISO/TS 10303-35:2003

Industrial automation systems and integration — Product data representation and exchange — Part 35: Conformance testing methodology and framework: Abstract test methods for standard data access interface (SDAI) implementations

ISO 21690:2006

Glass in building — Glass blocks — Specification and test methods

ISO 6742-5:2015

Cycles — Lighting and retro-reflective devices — Part 5: Lighting systems not powered by the cycle's movement

ISO 4614:1977

Plastics — Melamine-formaldehyde mouldings — Determination of extractable formaldehyde

ISO 6742-4:2015

Cycles — Lighting and retro-reflective devices — Part 4: Lighting systems powered by the cycle's movement

ISO 6742-3:2015

Cycles — Lighting and retro-reflective devices — Part 3: Installation and use of lighting and retro-reflective devices

ISO 13624-1:2009

Petroleum and natural gas industries — Drilling and production equipment — Part 1: Design and operation of marine drilling riser equipment

ISO/IEC 29341-3-10:2015

Information technology — UPnP Device Architecture — Part 3-10: Audio Video Device Control Protocol — Audio Video Transport Service

ISO 9445-2:2009

Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and plate/sheet

ISO 11999-4:2015

PPE for firefighters — Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures — Part 4: Gloves

ISO/IEC 29341-7-11:2015

Information technology — UPnP Device Architecture — Part 7-11: Lighting Device Control Protocol — Switch Power Service

ISO 9445-1:2009

Continuously cold-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths

ISO 21438-3:2010

Workplace atmospheres — Determination of inorganic acids by ion chromatography — Part 3: Hydrofluoric acid and particulate fluorides

ISO 1619:1976

Cryolite, natural and artificial — Preparation and storage of test samples

ISO 6152:1982

Thermometers for use with alcoholometers and alcohol hydrometers

ISO/IEC 23008-10:2015

Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 10: MPEG media transport forward error correction (FEC) codes

ISO 8536-9:2015

Infusion equipment for medical use — Part 9: Fluid lines for single use with pressure infusion equipment

ISO 8536-10:2015

Infusion equipment for medical use — Part 10: Accessories for fluid lines for single use with pressure infusion equipment

ISO 10303-207:2001

Industrial automation systems and integration — Product data representation and exchange — Part 207: Application protocol: Sheet metal die planning and design

ISO 18563-1:2015

Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 1: Instruments

ISO 8536-11:2015

Infusion equipment for medical use — Part 11: Infusion filters for single use with pressure infusion equipment

ISO/TS 18827:2017

Nanotechnologies — Electron spin resonance (ESR) as a method for measuring reactive oxygen species (ROS) generated by metal oxide nanomaterials

ISO 10303-224:2006

Industrial automation systems and integration — Product data representation and exchange — Part 224: Application protocol: Mechanical product definition for process planning using machining features

ISO 2114:2000

Plastics (polyester resins) and paints and varnishes (binders) — Determination of partial acid value and total acid value

ISO 8536-8:2015

Infusion equipment for medical use — Part 8: Infusion sets for single use with pressure infusion apparatus

ISO 16100-4:2006

Industrial automation systems and integration — Manufacturing software capability profiling for interoperability — Part 4: Conformance test methods, criteria and reports

ISO 11047:1998

Soil quality — Determination of cadmium, chromium, cobalt, copper, lead, manganese, nickel and zinc — Flame and electrothermal atomic absorption spectrometric methods

ISO 14269-2:1997

Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 2: Heating, ventilation and air-conditioning test method and performance

ISO/IEC 17821:2015

Information technology — Specification of low power wireless mesh network over channel-hopped TDMA links

ISO 22476-2:2005

Geotechnical investigation and testing — Field testing — Part 2: Dynamic probing

ISO 5963:1985

Documentation — Methods for examining documents, determining their subjects, and selecting indexing terms

ISO 6078:1982

Black tea — Vocabulary

ISO 5967:1981

Taps and thread cutting — Nomenclature of the main types and terminology

ISO 1834:1999

Short link chain for lifting purposes — General conditions of acceptance

ISO 6259-3:2015

Thermoplastics pipes — Determination of tensile properties — Part 3: Polyolefin pipes

ISO 13164-4:2015

Water quality — Radon-222 — Part 4: Test method using two-phase liquid scintillation counting

ISO 80416-2:2001

Basic principles for graphical symbols for use on equipment — Part 2: Form and use of arrows

ISO 6020-2:2015

Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 2: Compact series

ISO 8662-11:1999

Hand-held portable power tools — Measurement of vibrations at the handle — Part 11: Fastener driving tools

ISO 11074:2015

Soil quality — Vocabulary

ISO 9957-1:1992

Fluid draughting media — Part 1: Water-based India ink — Requirements and test conditions

ISO 7483:1991

Dimensions of gaskets for use with flanges to ISO 7005

ISO 9958-1:1992

Draughting media for technical drawings — Draughting film with polyester base — Part 1: Requirements and marking

ISO 10972-1:1998

Cranes — Requirements for mechanisms — Part 1: General

ISO 11783-7:2015

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 7: Implement messages application layer

ISO 6020-3:2015

Hydraulic fluid power — Mounting dimensions for single rod cylinders, 16 MPa (160 bar) series — Part 3: Compact series with bores from 250 mm to 500 mm

ISO 7738:2015

Assembly tools for screws and nuts — Combination wrenches — Lengths of wrenches and maximum thickness of heads

ISO 389-9:2009

Acoustics — Reference zero for the calibration of audiometric equipment — Part 9: Preferred test conditions for the determination of reference hearing threshold levels

ISO 3672-1:2000

Plastics — Unsaturated-polyester resins (UP-R) — Part 1: Designation system

ISO/TR 16922:2013

Natural gas — Odorization

ISO 14235:1998

Soil quality — Determination of organic carbon by sulfochromic oxidation

IEC 80601-2-71:2015

Medical electrical equipment — Part 2-71: Particular requirements for the basic safety and essential performance of functional Near-Infrared Spectroscopy (NIRS) equipment

ISO 17100:2015

Translation services — Requirements for translation services

ISO/IEC 15419:2009

Information technology — Automatic identification and data capture techniques — Bar code digital imaging and printing performance testing

ISO 9444-1:2009

Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 1: Narrow strip and cut lengths

ISO/IEC/IEEE 23026:2015

Systems and software engineering — Engineering and management of websites for systems, software, and services information

ISO 3912:1977

Woodruff keys and keyways

ISO 502:2015

Coal — Determination of caking power — Gray-King coke test

ISO 12240-2:1998

Spherical plain bearings — Part 2: Angular contact radial spherical plain bearings

ISO 8989:1995

Plastics — Liquid phenolic resins — Determination of water miscibility

ISO 12240-3:1998

Spherical plain bearings — Part 3: Thrust spherical plain bearings

ISO 27145-6:2015

Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment

ISO 16967:2015

Solid biofuels — Determination of major elements — Al, Ca, Fe, Mg, P, K, Si, Na and Ti

ISO 12240-4:1998

Spherical plain bearings — Part 4: Spherical plain bearing rod ends

ISO 27971:2015

Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology

IEC 80601-2-58:2014

Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery

ISO 16968:2015

Solid biofuels — Determination of minor elements

ISO 18337:2015

Surface chemical analysis — Surface characterization — Measurement of the lateral resolution of a confocal fluorescence microscope

ISO 10958-2:2015

Snowboards — Binding mounting area — Part 2: Requirements and test methods for snowboards with inserts

ISO 12240-1:1998

Spherical plain bearings — Part 1: Radial spherical plain bearings

ISO 9444-2:2009

Continuously hot-rolled stainless steel — Tolerances on dimensions and form — Part 2: Wide strip and sheet/plate

ISO/TS 28924:2007

Agricultural machinery - Guards for moving parts of power transmission - Guard opening without tool

ISO/IEC 29141:2009

Information technology — Biometrics — Tenprint capture using biometric application programming interface (BioAPI)

ISO 5413:1993

Machine tools — Positive drive of Morse tapers

ISO/TS 16774-5:2017

Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 5: Test method for watertightness

ISO/TS 16774-6:2017

Test methods for repair materials for water-leakage cracks in underground concrete structures — Part 6: Test method for response to the substrate movement

ISO 11085:2015

Cereals, cereals-based products and animal feeding stuffs — Determination of crude fat and total fat content by the Randall extraction method

ISO 27205:2010

Fermented milk products — Bacterial starter cultures — Standard of identity

ISO/IEC 15773:1998

Information technology — Telecommunications and information exchange between systems — Broadband Private Integrated Services Network — Inter-exchange signalling protocol — Transit counter additional network feature

ISO/IEC 15771:1998

Information technology —Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Common information additional network feature

ISO 12312-2:2015

Eye and face protection — Sunglasses and related eyewear — Part 2: Filters for direct observation of the sun

ISO 11040-4:2015

Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling

ISO/IEC 19763-1:2015

Information technology — Metamodel framework for interoperability (MFI) — Part 1: Framework

ISO/PAS 18761:2013

Use and handling of medical devices covered by the scope of ISO/TC 84 — Risk assessment on mucocutaneous blood exposure

ISO 8351-2:1994

Packaging — Method of specification for sacks — Part 2: Sacks made from thermoplastic flexible film

ISO/IEC/IEEE 26531:2015

Systems and software engineering — Content management for product life-cycle, user and service management documentation

ISO 9362:2014

Banking — Banking telecommunication messages — Business identifier code (BIC)

ISO 1572:1980

Tea — Preparation of ground sample of known dry matter content

ISO 18843:2015

Aluminium oxide primarily used for the production of aluminium — Method for the determination of flow time

ISO 128-43:2015

Technical product documentation (TPD) — General principles of presentation — Part 43: Projection methods in building drawings

ISO 1573:1980

Tea — Determination of loss in mass at 103 degrees C

ISO 14723:2009

Petroleum and natural gas industries — Pipeline transportation systems — Subsea pipeline valves

ISO 16610-1:2015

Geometrical product specifications (GPS) — Filtration — Part 1: Overview and basic concepts

ISO 11087:2015

Alpine ski-bindings — Retention devices — Requirements and test methods

ISO 16610-20:2015

Geometrical product specifications (GPS) — Filtration — Part 20: Linear profile filters: Basic concepts

ISO 875:1999

Essential oils — Evaluation of miscibility in ethanol

ISO 10196:2003

Document imaging applications — Recommendations for the creation of original documents

ISO 16610-22:2015

Geometrical product specifications (GPS) — Filtration — Part 22: Linear profile filters: Spline filters

ISO 16610-40:2015

Geometrical product specifications (GPS) — Filtration — Part 40: Morphological profile filters: Basic concepts

ICS :

 

ISO 3233-3:2015

Paints and varnishes — Determination of the percentage volume of non-volatile matter — Part 3: Determination by calculation from the non-volatile-matter content determined in accordance with ISO 3251, the density of the coating material and the density of the solvent in the coating material

ISO 10924-3:2015

Road vehicles — Circuit breakers — Part 3: Miniature circuit breakers with tabs (Blade type), Form CB11

ISO/TS 7240-29:2017

Fire detection and alarm systems — Part 29: Video fire detectors

ISO 10555-6:2015

Intravascular catheters — Sterile and single-use catheters — Part 6: Subcutaneous implanted ports

ISO 26428-9:2009

Digital cinema (D-cinema) distribution master — Part 9: Image pixel structure level 3 — Serial digital interface signal formatting

ISO 26429-8:2009

Digital cinema (D-cinema) packaging — Part 8: Packing list

ISO 9117-2:2010

Paints and varnishes — Drying tests — Part 2: Pressure test for stackability

ISO 7006:1981

Woodworking machines — Diameters of spindles for receiving circular sawblades

ISO/IEC TS 17961:2013

Information technology — Programming languages, their environments and system software interfaces — C secure coding rules

ISO/TS 17919:2013

Microbiology of the food chain — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — Detection of botulinum type A, B, E and F neurotoxin-producing clostridia

ISO 1578:1975

Tea — Determination of alkalinity of water-soluble ash

ISO 16610-41:2015

Geometrical product specifications (GPS) — Filtration — Part 41: Morphological profile filters: Disk and horizontal line-segment filters

ISO 1577:1987

Tea — Determination of acid-insoluble ash

ISO 16610-49:2015

Geometrical product specifications (GPS) — Filtration — Part 49: Morphological profile filters: Scale space techniques

ISO 17093:2015

Corrosion of metals and alloys — Guidelines for corrosion test by electrochemical noise measurements

ISO/TS 15768:2000

Measurement of liquid velocity in open channels — Design, selection and use of electromagnetic current meters

ISO 11451-1:2015

Road vehicles — Vehicle test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 1: General principles and terminology

ISO 21004:2006

Plastics piping systems — Multilayer pipes and their joints, based on thermoplastics, for water supply

ISO 15214:1998

Microbiology of food and animal feeding stuffs — Horizontal method for the enumeration of mesophilic lactic acid bacteria — Colony-count technique at 30 degrees C

ISO 1575:1987

Tea — Determination of total ash

ISO/TS 20026:2017

Intelligent transport systems — Cooperative ITS — Test architecture

ISO 1576:1988

Tea — Determination of water-soluble ash and water-insoluble ash

ISO 817:2014

Refrigerants — Designation and safety classification

ISO 11271:2002

Soil quality — Determination of redox potential — Field method

ISO 18278-1:2015

Resistance welding — Weldability — Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials

ISO 15752:2010

Ophthalmic instruments — Endoilluminators — Fundamental requirements and test methods for optical radiation safety

ISO 4301-5:1991

Cranes — Classification — Part 5: Overhead travelling and portal bridge cranes

ISO 26142:2010

Hydrogen detection apparatus — Stationary applications