ISO 105-E13:1994

Textiles — Tests for colour fastness — Part E13: Colour fastness to acid-felting: Severe

ISO 105-E11:1994

Textiles — Tests for colour fastness — Part E11: Colour fastness to steaming

ISO 17356-5:2006

Road vehicles — Open interface for embedded automotive applications — Part 5: OSEK/VDX Network Management (NM)

ISO 105-E10:1994

Textiles — Tests for colour fastness — Part E10: Colour fastness to decatizing

ISO 22887:2020

Determination of total sulfur in fertilizers by high temperature combustion

ISO/TS 20656-1:2017

Plastics piping systems — General rules for structural design of glass-reinforced thermosetting plastics (GRP) pipes — Part 1: Buried pipes

ISO 105-X11:1994

Textiles — Tests for colour fastness — Part X11: Colour fastness to hot pressing

ISO 105-X08:1994

Textiles — Tests for colour fastness — Part X08: Colour fastness to degumming

ISO/HL7 27932:2009

Data Exchange Standards — HL7 Clinical Document Architecture, Release 2

ISO 105-X07:1994

Textiles — Tests for colour fastness — Part X07: Colour fastness to cross-dyeing: Wool

ISO 15875-2:2003/AMD 2:2020

Plastics piping systems for hot and cold water installations — Crosslinked polyethylene (PE-X) — Part 2: Pipes — Amendment 2

ISO 105-X06:1994

Textiles — Tests for colour fastness — Part X06: Colour fastness to soda boiling

ISO/IEC 30144:2020

Information technology — Sensor network system architecture for power substations

ISO 15156-1:2020

Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 1: General principles for selection of cracking-resistant materials

ISO 14571:2020

Metallic coatings on non-metallic basis materials — Measurement of coating thickness — Micro-resistivity method

ISO 15156-2:2020

Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast irons

ISO/TS 21354:2020

Measurement of multiphase fluid flow

ISO/IEC TS 20071-21:2015

Information technology — User interface component accessibility — Part 21: Guidance on audio descriptions

ISO 21470:2020

Infant formula and adult nutritionals — Simultaneous determination of total vitamins B1, B2, B3 and B6 — Enzymatic digestion and LC-MS/MS

ISO 23848-2:2009

Machine tools — Ball splines — Part 2: Dynamic and static load ratings and rating life

ISO/TS 22789:2010

Health informatics — Conceptual framework for patient findings and problems in terminologies

ISO 23848-1:2009

Machine tools — Ball splines — Part 1: General characteristics and requirements

ISO 8600-5:2020

Optics and photonics — Medical endoscopes and endotherapy devices — Part 5: Determination of optical resolution of rigid endoscopes with optics

ISO 23243:2020

Non-destructive testing — Ultrasonic testing with arrays — Vocabulary

ISO 12749-6:2020

Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 6: Nuclear medicine

ISO/IEC 11770-5:2020

Information security — Key management — Part 5: Group key management

ISO 369:2009

Machine tools — Symbols for indications appearing on machine tools

ISO 4548-14:2016

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 14: Cold start simulation and hydraulic pulse durability for composite filter housings

ISO 18775:2020

Veneers — Terms and definitions, determination of physical characteristics and tolerances

ISO 15930-9:2020

Graphic technology — Prepress digital data exchange using PDF — Part 9: Complete exchange of printing data (PDF/X-6) and partial exchange of printing data with external profile reference (PDF/X-6p and PDF/X-6n) using PDF 2.0

ISO 22369-1:2006

Crop protection equipment — Drift classification of spraying equipment — Part 1: Classes

ISO 3900:1995

Rubber — Nitrile latex — Determination of bound acrylonitrile content

ISO 5755:2012

Sintered metal materials — Specifications

ISO 19230:2020

Gas analysis — Sampling guidelines

ISO 21051:2020

Construction and installation of ductile iron pipeline system

ISO 23977-1:2020

Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater — Part 1: Method by analysis of evolved carbon dioxide

ISO 22915-9:2014

Industrial trucks — Verification of stability — Part 9: Counterbalanced trucks with mast handling freight containers of 6 m (20 ft) length and longer

ISO/IEC/IEEE 8802-1X:2013/AMD 2:2020

Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Part 1X: Port-based network access control — Amendment 2: YANG data model

ISO 22915-12:2015

Industrial trucks — Verification of stability — Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer

ISO 20414:2020

Fire safety engineering — Verification and validation protocol for building fire evacuation models

ISO 7195:2020

Nuclear energy — Packagings for the transport of uranium hexafluoride (UF6)

ISO 10790:2015

Measurement of fluid flow in closed conduits — Guidance to the selection, installation and use of Coriolis flowmeters (mass flow, density and volume flow measurements)

ISO 27186:2020

Active implantable medical devices — Four-pole connector system for implantable cardiac rhythm management devices — Dimensional and test requirements

ISO 19005-4:2020

Document management — Electronic document file format for long-term preservation — Part 4: Use of ISO 32000-2 (PDF/A-4)

ISO 20506:2005

Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test

ISO 20505:2005

Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of the interlaminar shear strength of continuous-fibre-reinforced composites at ambient temperature by the compression of double-notched test pieces and by the Iosipescu test

ISO/TS 18226:2006

Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)

ISO 15156-3:2020

Petroleum and natural gas industries — Materials for use in H2S-containing environments in oil and gas production — Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys

ISO 15016:2015

Ships and marine technology — Guidelines for the assessment of speed and power performance by analysis of speed trial data

ISO 4144:2003

Pipework — Stainless steel fittings threaded in accordance with ISO 7-1

ISO 16808:2014

Metallic materials — Sheet and strip — Determination of biaxial stress-strain curve by means of bulge test with optical measuring systems

ISO 16119-4:2014

Agricultural and forestry machinery — Environmental requirements for sprayers — Part 4: Fixed and semi-mobile sprayers

ISO 4548-15:2014

Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 15: Vibration fatigue test for composite filter housings

ISO 16122-4:2015

Agricultural and forestry machines — Inspection of sprayers in use — Part 4: Fixed and semi-mobile sprayers

ISO 7258:1984

Polytetrafluoroethylene (PTFE) tubing for aerospace applications — Methods for the determination of the density and relative density

ISO 15367-2:2005

Lasers and laser-related equipment — Test methods for determination of the shape of a laser beam wavefront — Part 2: Shack-Hartmann sensors

ISO/TS 21396:2017

Rubber — Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments — Pyrolysis-GC/MS method

ISO 9073-14:2006

Textiles — Test methods for nonwovens — Part 14: Coverstock wetback

ISO 9022-3:2015

Optics and photonics — Environmental test methods — Part 3: Mechanical stress

ISO 1138:2007

Rubber compounding ingredients — Carbon black — Determination of sulfur content

ISO/TS 19700:2016

Controlled equivalence ratio method for the determination of hazardous components of fire effluents — Steady-state tube furnace

ISO/IEC 18092:2013

Information technology — Telecommunications and information exchange between systems — Near Field Communication — Interface and Protocol (NFCIP-1)

ISO 11690-2:2020

Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 2: Noise control measures

ISO 9073-13:2006

Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike-through time

ISO 6934-4:2020

Steel for the prestressing of concrete — Part 4: Strand

ISO 19019:2005

Sea-going vessels and marine technology — Instructions for planning, carrying out and reporting sea trials

ISO 485:1973

Aircraft water-methanol pressure connections

ISO 15118-2:2014

Road vehicles — Vehicle-to-Grid Communication Interface — Part 2: Network and application protocol requirements

ISO 25745-2:2015

Energy performance of lifts, escalators and moving walks — Part 2: Energy calculation and classification for lifts (elevators)

ISO 2046:1973

Gaseous breathing oxygen supplies for aircraft

ISO 9022-20:2015

Optics and photonics — Environmental test methods — Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide

ISO 2151:2004

Acoustics — Noise test code for compressors and vacuum pumps — Engineering method (Grade 2)

ISO 8008:2005

Aluminium oxide primarily used for the production of aluminium — Determination of specific surface area by nitrogen adsorption

ISO 12858-3:2005

Optics and optical instruments — Ancillary devices for geodetic instruments — Part 3: Tribrachs

ISO 23317:2014

Implants for surgery — In vitro evaluation for apatite-forming ability of implant materials

ISO 25217:2009

Adhesives — Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens

ISO 9928-1:2015

Cranes — Crane operating manual — Part 1: General

ISO 9942-1:2015

Cranes — Information labels — Part 1: General

ISO 17861:2014

Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of spectral transmittance of fine ceramics thin films under humid condition

ISO 29845:2011

Technical product documentation — Document types

ISO 13143-1:2020

Electronic fee collection — Evaluation of on-board and roadside equipment for conformity to ISO 12813 — Part 1: Test suite structure and test purposes

ISO 24261-1:2020

Fine bubble technology — Elimination method for sample characterization — Part 1: Evaluation procedure

ISO 15494:2015/AMD 1:2020

Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system — Amendment 1

ISO/IEC 9594-2:2020

Information technology — Open systems interconnection — Part 2: The Directory: Models

ISO 11690-1:2020

Acoustics — Recommended practice for the design of low-noise workplaces containing machinery — Part 1: Noise control strategies

ISO 49:1994

Malleable cast iron fittings threaded to ISO 7-1

ISO 8007-3:2003

Carbonaceous materials used in the production of aluminium — Sampling plans and sampling from individual units — Part 3: Sidewall blocks

ISO 19123:2005

Geographic information — Schema for coverage geometry and functions

ISO 5782-2:1997

Pneumatic fluid power — Compressed-air filters — Part 2: Test methods to determine the main characteristics to be included in supplier's literature

ISO 22763:2006

Equipment for crop protection — Sprayers — Demonstration track for field crop sprayers

ISO/IEC 24643:2020

Architecture for a distributed real-time access system

ISO/IEC 19772:2020

Information security — Authenticated encryption

ISO 22568-4:2019

Foot and leg protectors — Requirements and test methods for footwear components — Part 4: Non-metallic perforation resistant inserts

ISO 24266:2020

Footwear — Test methods for whole shoe — Flexing durability

ISO 22369-2:2010

Crop protection equipment — Drift classification of spraying equipment — Part 2: Classification of field crop sprayers by field measurements

ISO 11151-1:2015

Lasers and laser-related equipment — Standard optical components — Part 1: Components for the UV, visible and near-infrared spectral ranges

ISO 11151-2:2015

Lasers and laser-related equipment — Standard optical components — Part 2: Components for the infrared spectral range

ISO 22902-1:2006

Road vehicles — Automotive multimedia interface — Part 1: General technical overview

ISO 26323:2009

Milk products — Determination of the acidification activity of dairy cultures by continuous pH measurement (CpH)

ISO 24267:2020

Footwear — Determination of coefficient of friction for footwear and sole components — Test method

ISO 17356-4:2005

Road vehicles — Open interface for embedded automotive applications — Part 4: OSEK/VDX Communication (COM)

ISO 15367-1:2003

Lasers and laser-related equipment — Test methods for determination of the shape of a laser beam wavefront — Part 1: Terminology and fundamental aspects

ISO 17500:2006

Aluminium oxide used for the production of primary aluminium — Determination of attrition index

ISO 6953-1:2015

Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements

ISO 22248:2020

Lasers and laser-related equipment — Test methods for laser-induced damage threshold — Classification of medical beam delivery systems

ISO 15374:1998

Implants for surgery — Requirements for production of forgings

ISO/IEC 30118-2:2018

Information technology — Open Connectivity Foundation (OCF) Specification — Part 2: Security specification

ISO 11174:1996

Workplace air — Determination of particulate cadmium and cadmium compounds — Flame and electrothermal atomic absorption spectrometric method

ISO 9267:1988

Woodworking machines — Bandsaw blade sharpening machines — Nomenclature

ISO 9266:1988

Woodworking machines — Universal tool and cutter sharpeners — Nomenclature

ISO 14880-3:2006

Optics and photonics — Microlens arrays — Part 3: Test methods for optical properties other than wavefront aberrations

ISO 14880-4:2006

Optics and photonics — Microlens arrays — Part 4: Test methods for geometrical properties

ISO 5794-1:2010

Rubber compounding ingredients — Silica, precipitated, hydrated — Part 1: Non-rubber tests

ISO 21632:2018/AMD 1:2020

Graphic technology — Determination of the energy consumption of digital printing devices including transitional and related modes — Amendment 1

ISO 2563:2009

Aircraft ducting and piping — Profile dimensions for flanges of V-band couplings

ISO 7983:1988

Woodworking machines — Single blade circular sawing machines with travelling table — Nomenclature and acceptance conditions

ISO 16612-3:2020

Graphic technology — Variable data exchange — Part 3: Using PDF/X-6 (PDF/VT-3)

ISO/TS 9250-1:2012

Earth-moving machinery — Multilingual listing of equivalent terms — Part 1: General

ISO 7984:1988

Woodworking machines — Technical classification of woodworking machines and auxiliary machines for woodworking

ISO/TS 9250-2:2012

Earth-moving machinery — Multilingual listing of equivalent terms — Part 2: Performance and dimensions

ISO 22290:2020

Non-destructive testing — Infrared thermographic testing — General principles for thermoelastic stress measuring method

ISO/TS 80004-3:2020

Nanotechnologies — Vocabulary — Part 3: Carbon nano-objects

ISO/IEC 30118-6:2018

Information technology — Open Connectivity Foundation (OCF) Specification — Part 6: Resource to AllJoyn interface mapping specification

ISO/IEC 30118-5:2018

Information technology — Open Connectivity Foundation (OCF) Specification — Part 5: Smart home device specification

ISO/TS 19590:2017

Nanotechnologies — Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry

ISO/IEC 30118-4:2018

Information technology — Open Connectivity Foundation (OCF) Specification — Part 4: Resource type specification

ISO/IEC 30118-3:2018

Information technology — Open Connectivity Foundation (OCF) Specification — Part 3: Bridging specification

ISO/TS 24541:2020

Service activities relating to drinking water supply, wastewater and stormwater systems — Guidelines for the implementation of continuous monitoring systems for drinking water quality and operational parameters in drinking water distribution networks

ISO 17356-1:2005

Road vehicles — Open interface for embedded automotive applications — Part 1: General structure and terms, definitions and abbreviated terms

ISO 17356-2:2005

Road vehicles — Open interface for embedded automotive applications — Part 2: OSEK/VDX specifications for binding OS, COM and NM

ISO 3785:2006

Metallic materials — Designation of test specimen axes in relation to product texture

ISO 1833-3:2020

Textiles — Quantitative chemical analysis — Part 3: Mixtures of acetate with certain other fibres (method using acetone)

ISO 23977-2:2020

Plastics — Determination of the aerobic biodegradation of plastic materials exposed to seawater — Part 2: Method by measuring the oxygen demand in closed respirometer

ISO/TR 24464:2020

Automation systems and integration — Industrial data — Visualization elements of digital twins

ISO/TS 29585:2010

Health informatics — Deployment of a clinical data warehouse

ISO/TS 13447:2013

Fire safety engineering — Guidance for use of fire zone models

ISO 4145:1986

Non-alloy steel fittings threaded to ISO 7-1

ISO 451:1976

Aircraft — Pressure re-oiling connection

ISO 10991:2009

Micro process engineering — Vocabulary

ISO 13007-6:2020

Ceramic tiles — Grouts and adhesives — Part 6: Requirements, test methods, evaluation of conformity, classification and designation for waterproof membranes used with the installation of ceramic tiles

ISO 643:2019

Steels — Micrographic determination of the apparent grain size

ISO 21509:2006

Plastics and ebonite — Verification of Shore durometers

ISO/TS 18621-21:2020

Graphic technology — Image quality evaluation methods for printed matter — Part 21: Measurement of 1D distortions of macroscopic uniformity utilizing scanning spectrophotometers

ISO/IEC 30106-2:2020

Information technology — Object oriented BioAPI — Part 2: Java implementation

ISO/IEC 30106-3:2020

Information technology — Object oriented BioAPI — Part 3: C# implementation

ISO 13315-1:2012

Environmental management for concrete and concrete structures — Part 1: General principles

ISO 14880-2:2006

Optics and photonics — Microlens arrays — Part 2: Test methods for wavefront aberrations

ISO 7315:1988

Aerospace — "P" clamps (loop clamps) for fluid systems — Envelope dimensions

ISO 13175-3:2012

Implants for surgery — Calcium phosphates — Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes

ISO 23946:2020

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test methods for optical properties of ceramic phosphors for white light-emitting diodes using a gonio-spectrofluorometer

ISO 2016:1981

Capillary solder fittings for copper tubes — Assembly dimensions and tests

ISO 204:2018

Metallic materials — Uniaxial creep testing in tension — Method of test

ISO 23324:2020

Surface active agents — Fabric conditioners — Determination of antistatic performance

ISO/IEC TR 15944-14:2020

Information technology — Business operational view — Part 14: Open-edi reference model and cloud computing architecture

ISO 6926:2016/AMD 1:2020

Acoustics — Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels — Amendment 1

ISO 230-3:2020

Test code for machine tools — Part 3: Determination of thermal effects

ISO 12319:2006

Aerospace — 'P' (loop style) clamps — Procurement specification

ISO 16122-1:2015

Agricultural and forestry machinery — Inspection of sprayers in use — Part 1: General

ISO 9679:2006

Aerospace — Clamps for fluid systems — Test methods

ISO 16842:2014

Metallic materials — Sheet and strip — Biaxial tensile testing method using a cruciform test piece

Security and resilience — Emergency management — Part 1: General guidelines for the implementation of a community-based disaster early warning system

ISO 4280:1977

Cryolite, natural and artificial, and aluminium fluoride for industrial use — Determination of sulphate content — Barium sulphate gravimetric method

ISO 17526:2003

Optics and optical instruments — Lasers and laser-related equipment — Lifetime of lasers

ISO 1138:2007/AMD 1:2012

Rubber compounding ingredients — Carbon black — Determination of sulfur content — Amendment 1: Clarification of digestion temperature in Subclause 3.4.5

ISO 17947:2014

Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of fine silicon nitride powders

ISO/TS 20428:2017

Health informatics — Data elements and their metadata for describing structured clinical genomic sequence information in electronic health records

ISO 8728:2014

Ships and marine technology — Marine gyro-compasses

ISO 1694:1976

Cryolite, natural and artificial — Determination of iron content — 1,10- Phenanthroline photometric method

ISO 19902:2020

Petroleum and natural gas industries — Fixed steel offshore structures

ISO 21467:2004

Earth-moving machinery — Horizontal directional drills — Terminology and specifications