ISO 11093-5:2016

Paper and board — Testing of cores — Part 5: Determination of characteristics of concentric rotation

ISO 18923:2000

Imaging materials — Polyester-base magnetic tape — Storage practices

ISO 1272:2000

Essential oils — Determination of content of phenols

ISO 13879:1999

Petroleum and natural gas industries — Content and drafting of a functional specification

ISO 13880:1999

Petroleum and natural gas industries — Content and drafting of a technical specification

ISO 15700:1998

Leather — Tests for colour fastness — Colour fastness to water spotting

ISO 4892-1:2016

Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance

ISO/IEC 24727-6:2010

Identification cards — Integrated circuit card programming interfaces — Part 6: Registration authority procedures for the authentication protocols for interoperability

ISO/IEC TR 12785-3:2012

Information technology — Learning, education, and training — Content packaging — Part 3: Best practice and implementation guide

ISO 2493-1:2010

Paper and board — Determination of bending resistance — Part 1: Constant rate of deflection

ISO 3506-3:2009

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 3: Set screws and similar fasteners not under tensile stress

ISO/TS 29284:2012

Intelligent transport systems — Event-based probe vehicle data

ISO 3506-4:2009

Mechanical properties of corrosion-resistant stainless steel fasteners — Part 4: Tapping screws

ISO 14853:2016

Plastics — Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system — Method by measurement of biogas production

ISO 13999-1:1999

Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 1: Chain-mail gloves and arm guards

ISO 13924:2000

Plastics pipes and fittings — Bending-tensile cycle test for PE/metal transition fittings, PE tapping tees and PE branch saddles

ISO 12091:1995

Structured-wall thermoplastics pipes — Oven test

ISO 5183-2:2000

Resistance spot welding — Electrode adaptors, male taper 1:10 — Part 2: Parallel shank fixing for end-thrust electrodes

ISO 7503-2:2016

Measurement of radioactivity - Measurement and evaluation of surface contamination — Part 2: Test method using wipe-test samples

ISO 17246:2010

Coal — Proximate analysis

ISO 687:2010

Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample

ISO 9241-129:2010

Ergonomics of human-system interaction — Part 129: Guidance on software individualization

ISO 1171:2010

Solid mineral fuels — Determination of ash

ISO 562:2010

Hard coal and coke — Determination of volatile matter

ISO 18930:2011

Imaging materials — Pictorial colour reflection prints — Methods for evaluating image stability under outdoor conditions

ISO 18278-2:2016

Resistance welding — Weldability — Part 2: Evaluation procedures for weldability in spot welding

ISO/IEC TR 24763:2011

Information technology — Learning, education and training — Conceptual Reference Model for Competency Information and Related Objects

ISO/TS 19620:2018

Water quality — Determination of arsenic(III) and arsenic(V) species — Method using high performance liquid chromatography (HPLC) with detection by inductively coupled plasma mass spectrometry (ICP-MS) or hydride generation atomic fluorescence spectrometry (HG-AFS)

ISO 24490:2016

Cryogenic vessels — Pumps for cryogenic service

ISO 2631-4:2001

Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems

ISO/IEC TR 29163-3:2009

Information technology — Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition — Part 3: Run-Time Environment Version 1.1

ISO/IEC TR 29163-4:2009

Information technology — Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition — Part 4: Sequencing and Navigation Version 1.1

ISO/TS 22028-4:2012

Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 4: European Colour Initiative RGB colour image encoding [eciRGB (2008)]

ISO/IEC TR 29163-2:2009

Information technology — Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition — Part 2: Content Aggregation Model Version 1.1

ISO 17586:2016

Soil quality — Extraction of trace elements using dilute nitric acid

ISO 23233:2016

Rubber, vulcanized or thermoplastic — Determination of resistance to abrasion using a driven, vertical abrasive disc

ISO 4665:2016

Rubber, vulcanized or thermoplastic — Resistance to weathering

ISO/IEC 13157-2:2016

Information technology — Telecommunications and information exchange between systems — NFC Security — Part 2: NFC-SEC cryptography standard using ECDH and AES

ISO 3527:2016

Essential oil of parsley fruits (Petroselinum sativum Hoffm.)

ISO 1268-7:2001

Fibre-reinforced plastics — Methods of producing test plates — Part 7: Resin transfer moulding

ISO 1268-5:2001

Fibre-reinforced plastics — Methods of producing test plates — Part 5: Filament winding

ISO 21940-11:2016

Mechanical vibration — Rotor balancing — Part 11: Procedures and tolerances for rotors with rigid behaviour

ISO 3262-21:2000

Extenders for paints — Specifications and methods of test — Part 21: Silica sand (unground natural quartz)

ISO/IEC 40314:2016

Information technology — Mathematical Markup Language (MathML) Version 3.0 2nd Edition

ISO 1009:2000

Photography — Paper dimensions — Rolls for printers

ISO 16637:2016

Radiological protection — Monitoring and internal dosimetry for staff members exposed to medical radionuclides as unsealed sources

ISO 1996-1:2016

Acoustics — Description, measurement and assessment of environmental noise — Part 1: Basic quantities and assessment procedures

ISO 1268-2:2001

Fibre-reinforced plastics — Methods of producing test plates — Part 2: Contact and spray-up moulding

ISO 14558:2016

Rubber — Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy

ISO 3262-16:2000

Extenders for paints — Specifications and methods of test — Part 16: Aluminium hydroxides

ISO 17662:2016

Welding — Calibration, verification and validation of equipment used for welding, including ancillary activities

ISO 20283-5:2016

Mechanical vibration — Measurement of vibration on ships — Part 5: Guidelines for measurement, evaluation and reporting of vibration with regard to habitability on passenger and merchant ships

ISO 5470-1:2016

Rubber- or plastics-coated fabrics — Determination of abrasion resistance — Part 1: Taber abrader

ISO 13373-2:2016

Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 2: Processing, analysis and presentation of vibration data

ISO 23529:2016

Rubber — General procedures for preparing and conditioning test pieces for physical test methods

ISO/IEC 80079-38:2016

Explosive atmospheres — Part 38: Equipment and components in explosive atmospheres in underground mines

ISO 15361:2000

Pulps — Determination of zero-span tensile strength, wet or dry

ISO/IEC 17021-2:2016

Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 2: Competence requirements for auditing and certification of environmental management systems

ISO/IEC 17021-3:2017

Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 3: Competence requirements for auditing and certification of quality management systems

ISO 24155:2016

Hydrometry — Hydrometric data transmission systems — Specification of system requirements

ISO 9705-1:2016

Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration

ISO 15360-1:2000

Recycled pulps — Estimation of Stickies and Plastics — Part 1: Visual method

ISO 13053-2:2011

Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques

ISO 4608:1998

Plastics — Homopolymer and copolymer resins of vinyl chloride for general use — Determination of plasticizer absorption at room temperature

ISO/IEC 18477-6:2016

Information technology — Scalable compression and coding of continuous-tone still images — Part 6: IDR Integer Coding

ISO 9924-2:2016

Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 2: Acrylonitrile-butadiene and halobutyl rubbers

ISO 19905-1:2016

Petroleum and natural gas industries — Site-specific assessment of mobile offshore units — Part 1: Jack-ups

ISO 9924-1:2016

Rubber and rubber products — Determination of the composition of vulcanizates and uncured compounds by thermogravimetry — Part 1: Butadiene, ethylene-propylene copolymer and terpolymer, isobutene-isoprene, isoprene and styrene-butadiene rubbers

ISO 10771-1:2015

Hydraulic fluid power — Fatigue pressure testing of metal pressure-containing envelopes — Part 1: Test method

ISO 23337:2016

Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine

ISO 4796-1:2016

Laboratory glassware — Bottles — Part 1: Screw-neck bottles

ISO 16496:2016

Laboratory glassware — Vacuum-jacketed vessels for heat insulation

ISO 1580:2011

Slotted pan head screws — Product grade A

ISO 4611:2010

Plastics — Determination of the effects of exposure to damp heat, water spray and salt mist

ISO 18946:2011

Imaging materials — Reflection colour photographic prints — Method for testing humidity fastness

ISO 15913:2000

Water quality — Determination of selected phenoxyalkanoic herbicides, including bentazones and hydroxybenzonitriles by gas chromatography and mass spectrometry after solid phase extraction and derivatization

ISO 16315:2016

Small craft — Electric propulsion system

ISO 7995:2002

Aerospace — Nuts, hexagonal, self-locking, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

ISO 4666-3:2016

Rubber, vulcanized — Determination of temperature rise and resistance to fatigue in flexometer testing — Part 3: Compression flexometer (constant-strain type)

ISO 12277:2000

Aerospace — Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1 100 MPa (at ambient temperature) / 120 degrees C, 1 100 MPa (at ambient temperature) / 235 degrees C and 1 100 MPa (at ambient temperature) / 425 degrees C — Dimensions

ISO 9157:2002

Aerospace — Nuts, spline-drive, self-locking, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/425 degrees C, 1 210 MPa (at ambient temperature)/730 degrees C, 1 550 MPa (at ambient temperature)/235 degrees C, 1 550 MPa (at ambient temperature)/425 degrees C and 1 550 MPa (at ambient temperature)/600 degrees C — Dimensions

ISO 80369-6:2016

Small bore connectors for liquids and gases in healthcare applications — Part 6: Connectors for neuraxial applications

ISO/IEC 13157-3:2016

Information technology — Telecommunications and information exchange between systems — NFC Security — Part 3: NFC-SEC cryptography standard using ECDH-256 and AES-GCM

ISO 8566-2:2016

Cranes — Cabins and control stations — Part 2: Mobile cranes

ISO 8940:2002

Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug, with counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/120 degrees C, 900 MPa (at ambient temperature)/175 degrees C and 900 MPa (at ambient temperature)/235 degrees C — Dimensions

ISO 1920-10:2010

Testing of concrete — Part 10: Determination of static modulus of elasticity in compression

ISO 7045:2011

Pan head screws with type H or type Z cross recess — Product grade A

ISO 7046-1:2011

Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 1: Steel screws of property class 4.8

ISO 5003:2016

Flat bottom (Vignole) railway rails 43 kg/m and above

ISO 7046-2:2011

Countersunk flat head screws (common head style) with type H or type Z cross recess — Product grade A — Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws

ISO 7047:2011

Raised countersunk head screws (common head style) with type H or type Z cross recess — Product grade A

ISO/IEC 30130:2016

Software engineering — Capabilities of software testing tools

ISO 2009:2011

Slotted countersunk flat head screws — Product grade A

ISO 2010:2011

Slotted raised countersunk head screws — Product grade A

ISO 6296:2000

Petroleum products — Determination of water — Potentiometric Karl Fischer titration method

ISO 23559:2011

Plastics — Film and sheeting — Guidance on the testing of thermoplastic films

ISO 1652:2011

Rubber latex — Determination of apparent viscosity by the Brookfield test method

ISO 14647:2000

Metallic coatings — Determination of porosity in gold coatings on metal substrates — Nitric acid vapour test

ISO 14324:2003

Resistance spot welding — Destructive tests of welds — Method for the fatigue testing of spot welded joints

ISO 3160-1:1998

Watch-cases and accessories — Gold alloy coverings — Part 1: General requirements

ISO 15753:2016

Animal and vegetable fats and oils — Determination of polycyclic aromatic hydrocarbons

ISO 5794-3:2011

Rubber compounding ingredients — Silica, precipitated, hydrated — Part 3: Evaluation procedures in a blend of solution styrene-butadiene rubber (S-SBR) and butadiene rubber (BR)

ISO 9936:2016

Animal and vegetable fats and oils — Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography

ISO 6886:2016

Animal and vegetable fats and oils — Determination of oxidative stability (accelerated oxidation test)

ISO 6885:2016

Animal and vegetable fats and oils — Determination of anisidine value

ISO 15375:2010

Medical infusion bottles — Suspension devices for multiple use — Requirements and test methods

ISO 8362-6:2010

Injection containers and accessories — Part 6: Caps made of aluminium-plastics combinations for injection vials

ISO 8608:2016

Mechanical vibration — Road surface profiles — Reporting of measured data

ISO 4641:2016

Rubber hoses and hose assemblies for water suction and discharge — Specification

ISO/IEC GUIDE 71:2014

Guide for addressing accessibility in standards

ISO 16142-1:2016

Medical devices — Recognized essential principles of safety and performance of medical devices — Part 1: General essential principles and additional specific essential principles for all non-IVD medical devices and guidance on the selection of standards

ISO 9236-3:1999

Photography — Sensitometry of screen/film systems for medical radiography — Part 3: Determination of sensitometric curve shape, speed and average gradient for mammography

ISO 9270-1:2010

7/24 taper spindle noses for automatic tool changers — Part 1: Dimensions and designation of spindle noses of forms S and SF

ISO/TS 80004-7:2011

Nanotechnologies — Vocabulary — Part 7: Diagnostics and therapeutics for healthcare

ISO 6804:2016

Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification

ISO 11142:2005

Micrographics — Colour microfilm — Application of the exposure technique to prepare line originals and continuous-tone originals

ISO 1401:2016

Rubber hoses for agricultural spraying

ISO/TS 22640:2018

Rubber — Framework for physical and chemical characterization of tyre and road wear particles (TRWP)

ISO/TS 22638:2018

Rubber — Generation and collection of tyre and road wear particles (TRWP) — Road simulator laboratory method

ISO 1827:2016

Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods

ISO 14231:2000

Thermal spraying — Acceptance inspection of thermal spraying equipment

ISO 17531:2002

Photography — Processing chemicals — Specifications for 4-(N-ethyl-N-2-methanesulfonylaminoethyl)-2-methylphenylenediamine sesquisulfate monohydrate

ISO/TS 22028-3:2012

Photography and graphic technology — Extended colour encodings for digital image storage, manipulation and interchange — Part 3: Reference input medium metric RGB colour image encoding (RIMM RGB)

ISO/IEC 29199-3:2010

Information technology — JPEG XR image coding system — Part 3: Motion JPEG XR

ISO 11771:2010

Air quality — Determination of time-averaged mass emissions and emission factors — General approach

ISO 8695:2010

Tools for pressing — Punches — Nomenclature and terminology

ISO 11382:2010

Optics and photonics — Optical materials and components — Characterization of optical materials used in the infrared spectral range from 0,78 µm to 25 µm

ISO 5774:2016

Plastics hoses — Textile-reinforced types for compressed-air applications — Specification

ISO 16433:2006

Resistance welding — Procedure for seam welding of uncoated and coated low carbon steels

ISO 2398:2016

Rubber hoses, textile-reinforced, for compressed air — Specification

ISO 16432:2006

Resistance welding — Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s)

ISO 10717:2010

Footwear — Test method for slide fasteners — Burst strength

ISO 1043-2:2011

Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials

ISO 8331:2016

Rubber and plastics hoses and hose assemblies — Guidelines for selection, storage, use and maintenance

ISO/IEC TS 17021-10:2018

Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 10: Competence requirements for auditing and certification of occupational health and safety management systems

ISO 19119:2016

Geographic information — Services

ISO 3338-1:1996

Cylindrical shanks for milling cutters — Part 1: Dimensional characteristics of plain cylindrical shanks

ISO 13363:2016

Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification

ISO 4081:2016

Rubber hoses and tubing for cooling systems for internal-combustion engines — Specification

ISO 17668:2016

Zinc diffusion coatings on ferrous products — Sherardizing — Specification

ISO 3796:1999

Ships and marine technology — Clear openings for external single-leaf doors

ISO 4610:2001

Plastics — Vinyl chloride homopolymer and copolymer resins — Sieve analysis using air-jet sieve apparatus

ISO 3950:2016

Dentistry — Designation system for teeth and areas of the oral cavity

ISO/IEC 24800-4:2010

Information technology — JPSearch — Part 4: File format for metadata embedded in image data (JPEG and JPEG 2000)

ISO 18920:2011

Imaging materials — Reflection prints — Storage practices

ISO 8033:2016

Rubber and plastics hoses — Determination of adhesion between components

ISO 7751:2016

Rubber and plastics hoses and hose assemblies — Ratios of proof and burst pressure to maximum working pressure

ISO 7326:2016

Rubber and plastics hoses — Assessment of ozone resistance under static conditions

ISO 10378:2016

Copper, lead and zinc sulfide concentrates — Determination of gold and silver — Fire assay gravimetric and flame atomic absorption spectrometric method

ISO/TS 21719-2:2018

Electronic fee collection — Personalization of on-board equipment (OBE) — Part 2: Using dedicated short-range communication

ISO 11357-1:2016

Plastics — Differential scanning calorimetry (DSC) — Part 1: General principles

ISO 13738:2011

Lubricants, industrial oils and related products (class L) — Family E (Internal combustion engine oils) — Specifications for two-stroke-cycle gasoline engine oils (categories EGB, EGC and EGD)

ISO/TS 21719-1:2018

Electronic fee collection — Personalization of on-board equipment (OBE) — Part 1: Framework

ISO 9156:1998

Aerospace — Nuts, anchor, self-locking, fixed, 90 degrees corner, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

ISO 15973:2000

Closed end blind rivets with break pull mandrel and protruding head — AlA/St

ISO 3715-1:2002

Ships and marine technology — Propulsion plants for ships — Part 1: Vocabulary for geometry of propellers

ISO 3222:1998

Aerospace — Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

ISO 15310:1999

Fibre-reinforced plastic composites — Determination of the in-plane shear modulus by the plate twist method

ISO 3223:1998

Aerospace — Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

ISO/TR 16060:2003

Destructive tests on welds in metallic materials — Etchants for macroscopic and microscopic examination

ISO 15974:2000

Closed end blind rivets with break pull mandrel and countersunk head — AlA/St

ISO/IEC 14754:1999

Information technology — Pen-Based Interfaces — Common gestures for Text Editing with Pen-Based Systems

ISO 17601:2016

Soil quality — Estimation of abundance of selected microbial gene sequences by quantitative PCR from DNA directly extracted from soil

ISO 3221:1998

Aerospace — Nuts, anchor, self-locking, fixed, 90 degrees corner, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

ISO 3168:1998

Aerospace — Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

ISO/IEC 13249-3:2016

Information technology — Database languages — SQL multimedia and application packages — Part 3: Spatial

ISO 24502:2010

Ergonomics — Accessible design — Specification of age-related luminance contrast for coloured light

ISO 1304:2016

Rubber compounding ingredients — Carbon black — Determination of iodine adsorption number

ISO 11235:2016

Rubber compounding ingredients — Sulfenamide accelerators — Test methods

ISO 9270-2:2010

7/24 taper spindle noses for automatic tool changers — Part 2: Dimensions and designation of spindle noses of forms J and JF

ISO 24501:2010

Ergonomics — Accessible design — Sound pressure levels of auditory signals for consumer products