ISO
606:2015
Short-pitch
transmission precision roller and bush chains, attachments and associated chain
sprockets
ISO
13381-1:2015
Condition
monitoring and diagnostics of machines — Prognostics — Part 1: General
guidelines
ISO
7543-2:1993
Chillies
and chilli oleoresins — Determination of total capsaicinoid content — Part 2:
Method using high-performance liquid chromatography
ISO 6686:1995
Equipment for crop protection — Antidrip devices — Determination of performance
ISO 10579:2010
Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts
ISO 13065:2015
Sustainability criteria for bioenergy
ISO 6068:1985
Information processing — Recording characteristics of instrumentation magnetic tape (including telemetry systems) — Interchange requirements
ISO 19973-5:2015
Pneumatic fluid power — Assessment of component reliability by testing — Part 5: Non-return valves, shuttle valves, dual pressure valves (AND function), one-way adjustable flow control valves, quick-exhaust valves
ISO 7543-1:1994
Chillies and chilli oleoresins — Determination of total capsaicinoid content — Part 1: Spectrometric method
ISO/IEC 30141:2018/COR 1:2018
Internet of Things (loT) — Reference Architecture — Technical Corrigendum 1
ISO 19973-1:2015
Pneumatic fluid power — Assessment of component reliability by testing — Part 1: General procedures
ISO 19973-2:2015
Pneumatic fluid power — Assessment of component reliability by testing — Part 2: Directional control valves
ISO 19973-3:2015
Pneumatic fluid power — Assessment of component reliability by testing — Part 3: Cylinders with piston rod
ISO 14861:2015
Graphic technology — Requirements for colour soft proofing systems
ISO 7926:1991
Dehydrated tarragon (Artemisia dracunculus Linnaeus) — Specification
ISO 18338:2015
Metallic materials — Torsion test at ambient temperature
ISO/IEC 14495-1:1999
Information technology — Lossless and near-lossless compression of continuous-tone still images: Baseline — Part 1:
ISO 4217:2015
Codes for the representation of currencies
ISO 5667-3:2018
Water quality — Sampling — Part 3: Preservation and handling of water samples
ISO 7928-1:1991
Savory — Specification — Part 1: Winter savory (Satureja montana Linnaeus)
ISO 5667-22:2010
Water quality — Sampling — Part 22: Guidance on the design and installation of groundwater monitoring points
ISO 7928-2:1991
Savory — Specification — Part 2: Summer savory (Satureja hortensis Linnaeus)
ISO 7927-1:1987
Fennel seed, whole or ground (powdered) — Part 1: Bitter fennel seed (Foeniculum vulgare P. Miller var. vulgare) — Specification
ISO 15329:2006
Corrosion of metals and alloys — Anodic test for evaluation of intergranular corrosion susceptibility of heat-treatable aluminium alloys
ISO/IEC 8441-2:1991
Information technology — High density digital recording (HDDR) — Part 2: Guide for interchange practice
ISO 10975:2009
Tractors and machinery for agriculture — Auto-guidance systems for operator-controlled tractors and self-propelled machines — Safety requirements
ISO/ASTM 51900:2009
Guide for dosimetry in radiation research on food and agricultural products
ISO 105-A01:2010
Textiles — Tests for colour fastness — Part A01: General principles of testing
ISO 18842:2015
Aluminium oxide primarily used for the production of aluminium — Method for the determination of tapped and untapped density
ISO 8783:2015
Alpine skis — Guidelines for conducting slope performance tests
ISO 23467:2020
Ice plug isolation of piping in nuclear power plant
ISO 21415-2:2015
Wheat and wheat flour — Gluten content — Part 2: Determination of wet gluten and gluten index by mechanical means
ISO 3826-4:2015
Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features
ISO 4002-2:1977
Equipment for sowing and planting — Disks — Part 2: Flat disks type D2 with single bevel — Dimensions
ISO 6196-4:1998
Micrographics — Vocabulary — Part 4: Materials and packaging
ISO 19429:2015
Dentistry — Designation system for dental implants
ISO 15084:2003
Small craft — Anchoring, mooring and towing — Strong points
ISO/IEC 14496-26:2010
Information technology — Coding of audio-visual objects — Part 26: Audio conformance
ISO 7132:2003
Earth-moving machinery — Dumpers — Terminology and commercial specifications
ISO/IEC 10918-4:1999
Information technology — Digital compression and coding of continuous-tone still images: Registration of JPEG profiles, SPIFF profiles, SPIFF tags, SPIFF colour spaces, APPn markers, SPIFF compression types and Registration Authorities (REGAUT) — Part 4:
ISO 105-C08:2010
Textiles — Tests for colour fastness — Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator
ISO 11108:1996
Information and documentation — Archival paper — Requirements for permanence and durability
ISO 7918:1995
Forestry machinery — Portable brush-cutters and grass-trimmers — Cutting attachment guard dimensions
ISO 14253-5:2015
Geometrical product specifications (GPS) — Inspection by measurement of workpieces and measuring equipment — Part 5: Uncertainty in verification testing of indicating measuring instruments
ISO 18488:2015
Polyethylene (PE) materials for piping systems — Determination of Strain Hardening Modulus in relation to slow crack growth — Test method
ISO 18489:2015
Polyethylene (PE) materials for piping systems — Determination of resistance to slow crack growth under cyclic loading — Cracked Round Bar test method
ISO 3794:1976
Essential oils (containing tertiary alcohols) — Estimation of free alcohols content by determination of ester value after acetylation
ISO 16730-1:2015
Fire safety engineering — Procedures and requirements for verification and validation of calculation methods — Part 1: General
ISO/IEC 29102:2015
Information technology — Office equipment — Method for the determination of ink cartridge photo yield for colour printing with inkjet printers and multi-function devices that contain inkjet printer components
ISO 80601-2-72:2015
Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
ISO/ASTM 52303:2015
Guide for absorbed-dose mapping in radiation processing facilities
ISO 14602:2010
Non-active surgical implants — Implants for osteosynthesis — Particular requirements
ISO 16230-1:2015
Agricultural machinery and tractors — Safety of higher voltage electrical and electronic components and systems — Part 1: General requirements
ISO 5356-1:2015
Anaesthetic and respiratory equipment — Conical connectors — Part 1: Cones and sockets
ISO 20282-1:2006
Ease of operation of everyday products — Part 1: Design requirements for context of use and user characteristics
ISO 18278-1:2015
Resistance welding — Weldability — Part 1: General requirements for the evaluation of weldability for resistance spot, seam and projection welding of metallic materials
ISO 11011:2013
Compressed air — Energy efficiency — Assessment
ISO/IEC 9281-2:1990
Information technology — Picture coding methods — Part 2: Procedure for registration
ISO/ASTM 51026:2015
Practice for using the Fricke dosimetry system
ISO 6196-2:1993
Micrographics — Vocabulary — Part 2: Image positions and methods of recording
ISO 6989:1981
Textile fibres — Determination of length and length distribution of staple fibres (by measurement of single fibres)
ISO 19347:2015
Synchronous belt drives — Imperial pitch trapezoidal profile system — Belts and pulleys
ISO 6196-1:1993
Micrographics — Vocabulary — Part 1: General terms
ISO 10447:2015
Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds
ISO 9000:2015
Quality management systems — Fundamentals and vocabulary
ISO 105-X14:1994
Textiles — Tests for colour fastness — Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurate
ISO 21029-2:2015
Cryogenic vessels — Transportable vacuum insulated vessels of not more than 1 000 litres volume — Part 2: Operational requirements
ISO 9972:2015
Thermal performance of buildings — Determination of air permeability of buildings — Fan pressurization method
ISO 3266:2010
Forged steel eyebolts grade 4 for general lifting purposes
ISO 12472:2003
Fire resistance of timber door assemblies - Method of determining the efficacy of intumescent seals
ISO 7437:1990
Technical drawings — Construction drawings — General rules for execution of production drawings for prefabricated structural components
ISO/TS 21331:2020
Graphic technology and deinked pulp — Guidance for assessing the deinking performance of printed paper products
ISO 2331:1974
Fork lift trucks — Hook-on type fork arms — Vocabulary
ISO/IEC 14496-13:2004
Information technology — Coding of audio-visual objects — Part 13: Intellectual Property Management and Protection (IPMP) extensions
ISO 9706:1994
Information and documentation — Paper for documents — Requirements for permanence
ISO 3936:1993
Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions
ISO/TS 15079:2001
Powered lawn, garden and horticultural equipment — Operator controls — Guidance on actuating forces, displacement, location and methods of operation
ISO 12231-1:2020
Photography — Electronic still picture imaging terminology — Part 1: Supplemental vocabulary
ISO 17918:2015
Corrosion of metals and alloys — Evaluation of selective corrosion of Cu alloys and grey cast iron for power plant components by visual inspection and hardness measurement
ISO 2961:1974
Aluminium oxide primarily used for the production of aluminium — Determination of an adsorption index
ISO 7439:2015
Copper-bearing contraceptive intrauterine devices — Requirements and tests
ISO 17211:2015
Stationary source emissions — Sampling and determination of selenium compounds in flue gas
ISO 10262:1998
Earth-moving machinery — Hydraulic excavators — Laboratory tests and performance requirements for operator protective guards
ISO 8283-1:1991
Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)
ISO 2146:2010
Information and documentation — Registry services for libraries and related organizations
IEC 60601-1-12:2014
Medical Electrical Equipment — Part 1-12: General requirements for basic safety and essential performance — Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the emergency medical services environment
ISO 10767-1:2015
Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps
ISO 15654:2015
Fatigue test method for transmission precision roller chains and leaf chains
ISO 12499:1999
Industrial fans — Mechanical safety of fans — Guarding
ISO 8362-2:2015
Injection containers and accessories — Part 2: Closures for injection vials
ISO 23222:2020
Corrosion control engineering life cycle — Risk assessment
ISO 23221:2020
Pipeline corrosion control engineering life cycle — General requirements
ISO 9898:2000
Equipment for crop protection — Test methods for air-assisted sprayers for bush and tree crops
ISO 15318:1999
Pulp, paper and board — Determination of 7 specified polychlorinated biphenyls (PCB)
ISO 6196-10:1999
Micrographics — Vocabulary — Part 10: Index
ISO 927:2009
Spices and condiments — Determination of extraneous matter and foreign matter content
ISO 9355-2:1999
Ergonomic requirements for the design of displays and control actuators — Part 2: Displays
ISO 16574:2015
Determination of percentage of resolvable pearlite in high carbon steel wire rod
ISO 16258-1:2015
Workplace air — Analysis of respirable crystalline silica by X-ray diffraction — Part 1: Direct-on-filter method
ISO 16258-2:2015
Workplace air — Analysis of respirable crystalline silica by X-ray diffraction — Part 2: Method by indirect analysis
ISO 9355-1:1999
Ergonomic requirements for the design of displays and control actuators — Part 1: Human interactions with displays and control actuators
ISO 17591:2002
Machinery for forestry — Knuckleboom log loaders — Identification terminology, classification and component nomenclature
IEC 81346-1:2009
Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 1: Basic rules
ISO 7866:2012/AMD 1:2020
Gas cylinders — Refillable seamless aluminium alloy gas cylinders — Design, construction and testing — Amendment 1
ISO 10889-8:1997
Tool holders with cylindrical shank — Part 8: Type Z, accessories
ISO/IEC 15444-8:2007
Information technology — JPEG 2000 image coding system: Secure JPEG 2000 — Part 8:
ISO 7518:1983
Technical drawings — Construction drawings — Simplified representation of demolition and rebuilding
ISO 8169:1984
Equipment for crop protection — Sprayers — Connecting dimensions for nozzles and manometers
ISO 3883:1977
Office machines — Line and character capacity of address masters
ISO 21613:2015
(U, Pu)O2 Powders and sintered pellets — Determination of chlorine and fluorine
ISO 17294-2:2016
Water quality — Application of inductively coupled plasma mass spectrometry (ICP-MS) — Part 2: Determination of selected elements including uranium isotopes
ISO 11192:2005
Small craft — Graphical symbols
ISO 8271:2005
Door leaves — Determination of the resistance to hard body impact
ISO 2256:1984
Dried mint (spearmint) (Mentha spicata Linnaeus syn. Mentha viridis Linnaeus) — Specification
ISO 18134-3:2015
Solid biofuels — Determination of moisture content — Oven dry method — Part 3: Moisture in general analysis sample
ISO/IEC 14496-15:2019/AMD 1:2020
Information technology — Coding of audio-visual objects — Part 15: Carriage of network abstraction layer (NAL) unit structured video in the ISO base media file format — Amendment 1: Improved support for tiling and layering
ISO 6535:2015
Portable chain-saws — Chain brake performance
ISO 23611-2:2006
Soil quality — Sampling of soil invertebrates — Part 2: Sampling and extraction of micro-arthropods (Collembola and Acarina)
ISO/IEC 23000-4:2009
Information technology — Multimedia application format (MPEG-A) — Part 4: Musical slide show application format
ISO 13737:2004
Petroleum products and lubricants — Determination of low-temperature cone penetration of lubricating greases
ISO 25377:2020
Hydrometric uncertainty guidance (HUG)
ISO 24336:2005
Laminate floor coverings — Determination of thickness swelling after partial immersion in water
ISO 104:2015
Rolling bearings — Thrust bearings — Boundary dimensions, general plan
ISO 17510:2015
Medical devices — Sleep apnoea breathing therapy — Masks and application accessories
ISO/TS 30407:2017
Human resource management — Cost-Per-Hire
ISO 10768:2010
Footwear — Test method for the determination of the resistance of elastic materials for footwear to repeated extension — Fatigue resistance
ISO 9563:2015
Belt drives — Electrical conductivity of antistatic endless synchronous belts — Characteristics and test method
ISO 55000:2014
Asset management — Overview, principles and terminology
ISO 5270:2012
Pulps — Laboratory sheets — Determination of physical properties
ISO 959-2:1998
Pepper (Piper nigrum L.), whole or ground — Specification — Part 2: White pepper
ISO 22215:2006
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for tensile creep of monolithic ceramics
ISO/IEC 29170-2:2015
Information technology — Advanced image coding and evaluation — Part 2: Evaluation procedure for nearly lossless coding
ISO 10545-5:1996
Ceramic tiles — Part 5: Determination of impact resistance by measurement of coefficient of restitution
ISO 17129:2006
Milk powder — Determination of soy and pea proteins using capillary electrophoresis in the presence of sodium dodecyl sulfate (SDS-CE) — Screening method
ISO/TS 20477:2017
Nanotechnologies — Standard terms and their definition for cellulose nanomaterial
ISO/IEC 29109-2:2010
Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 2: Finger minutiae data
ISO 18435-3:2015
Industrial automation systems and integration — Diagnostics, capability assessment and maintenance applications integration — Part 3: Applications integration description method
ISO 10765:2010
Footwear — Test method for the characterization of elastic materials — Tensile performance
ISO 18596:2015
Test method for staple length of dehaired cashmere — Hand-arranging method
ISO 11536:2015
Iron ores — Determination of loss on ignition — Gravimetric method
ISO 9984:1996
Information and documentation — Transliteration of Georgian characters into Latin characters
IEC 60601-1-8:2006
Medical electrical equipment — Part 1-8: General requirements for basic safety and essential performance — Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems
ISO 20160:2006
Implants for surgery — Metallic materials — Classification of microstructures for alpha+beta titanium alloy bars
ISO 25178-602:2010
Geometrical product specifications (GPS) — Surface texture: Areal — Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments
ISO 23747:2015
Anaesthetic and respiratory equipment — Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans
ISO 22310:2006
Information and documentation — Guidelines for standards drafters for stating records management requirements in standards
ISO 18134-1:2015
Solid biofuels — Determination of moisture content — Oven dry method — Part 1: Total moisture — Reference method
ISO 8872:2003
Aluminium caps for transfusion, infusion and injection bottles — General requirements and test methods
ISO 8623:2015
Tall-oil fatty acids for paints and varnishes — Test methods and characteristic values
ISO 4263-3:2015
Petroleum and related products — Determination of the ageing behaviour of inhibited oils and fluids using the TOST test — Part 3: Anhydrous procedure for synthetic hydraulic fluids
ISO 19009:2015
Small craft — Electric navigation lights — Performance of LED lights
ISO 13347-3:2004
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 3: Enveloping surface methods
ISO 13347-2:2004
Industrial fans — Determination of fan sound power levels under standardized laboratory conditions — Part 2: Reverberant room method
ISO 9005:2007
Nuclear energy — Uranium dioxide powder and sintered pellets — Determination of oxygen/uranium atomic ratio by the amperometric method
ISO 15928-1:2015
Houses — Description of performance — Part 1: Structural safety
ISO 738:2015
Coniferous sawn timber — Sizes — Permissible deviations and shrinkage
ISO 15928-2:2015
Houses — Description of performance — Part 2: Structural serviceability
ISO 15928-3:2015
Houses — Description of performance — Part 3: Structural durability
ISO 20844:2015
Petroleum and related products — Determination of the shear stability of polymer-containing oils using a diesel injector nozzle
ISO 9175-1:1988
Tubular tips for hand-held technical pens using India ink on tracing paper — Part 1: Definitions, dimensions, designation and marking
ISO 9246:1988
Earth-moving machinery — Crawler and wheel tractor dozer blades — Volumetric ratings
ISO/IEC 24800-3:2010
Information technology — JPSearch — Part 3: Query format
ISO 23123:2020
Corrosion control engineering life cycle — General requirements
ISO 10889-1:2004
Tool holders with cylindrical shank — Part 1: Cylindrical shank, location bore — Technical delivery conditions
ISO 3380:2015
Leather — Physical and mechanical tests — Determination of shrinkage temperature up to 100 °C
ISO 13732-3:2005
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 3: Cold surfaces
ISO/TS 13732-2:2001
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 2: Human contact with surfaces at moderate temperature
ISO 12749-4:2015
Nuclear energy, nuclear technologies, and radiological protection — Vocabulary — Part 4: Dosimetry for radiation processing
ISO 959-1:1998
Pepper (Piper nigrum L.), whole or ground — Specification — Part 1: Black pepper
ISO 17604:2015
Microbiology of the food chain — Carcass sampling for microbiological analysis
ISO 3699:1976
Anhydrous hydrogen fluoride for industrial use — Determination of water content — Karl Fischer method
ISO 1005-1:1994
Railway rolling stock material — Part 1: Rough-rolled tyres for tractive and trailing stock — Technical delivery conditions
ISO 2160:1998
Petroleum products — Corrosiveness to copper — Copper strip test
ISO 10754:1996
Information and documentation — Extension of the Cyrillic alphabet coded character set for non-Slavic languages for bibliographic information interchange
ISO 6892-4:2015
Metallic materials — Tensile testing — Part 4: Method of test in liquid helium