- ISO 20318-1:2019

Mechanical pencils and leads for general use — Classification, dimensions, quality and test methods — Part 1: Mechanical pencils

- ISO 11662-1:1995

Mobile cranes — Experimental determination of crane performance — Part 1: Tipping loads and radii

- ISO/IEC 24773-1:2019

Software and systems engineering — Certification of software and systems engineering professionals — Part 1: General requirements

- ISO 11653:1997

Steel — Determination of high cobalt content — Potentiometric titration method after separation by ion exchange

- ISO 1478:1999

Tapping screws thread

- ISO 4519:1980

Electrodeposited metallic coatings and related finishes — Sampling procedures for inspection by attributes

- ISO 4603:1993

Textile glass — Woven fabrics — Determination of thickness

- ISO 30021:2013

Plastics — Burning behaviour — Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites

- ISO 729:1988

Oilseeds — Determination of acidity of oils

- ISO 6225-1:2006

Rubber, raw, natural — Determination of castor oil content — Part 1: Determination of castor oil glyceride content by thin-layer chromatography

- ISO 18250-6:2019

Medical devices — Connectors for reservoir delivery systems for healthcare applications — Part 6: Neural applications

- ISO 18938:2014

Imaging materials — Optical discs — Care and handling for extended storage

- ISO 10229:1994

Water quality — Determination of the prolonged toxicity of substances to freshwater fish — Method for evaluating the effects of substances on the growth rate of rainbow trout (Oncorhynchus mykiss Walbaum (Teleostei, Salmonidae))

- ISO 10545-4:2019

Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength

- ISO 17403:2014

Rubber — Determination of magnesium content of field and concentrated natural rubber latices by titration (cyanide-free method)

- ISO 14835-2:2005

Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral vascular function — Part 2: Measurement and evaluation of finger systolic blood pressure

- ISO 16587:2004

Mechanical vibration and shock — Performance parameters for condition monitoring of structures

- ISO 50046:2019

General methods for predicting energy savings

- ISO 473:2019

Lithopone pigments — General requirements and methods of testing

- ISO 10146:2019

Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength

- ISO 7323:2006

Rubber, raw and unvulcanized compounded — Determination of plasticity number and recovery number — Parallel-plate method

- ISO 155:2019

Belt drives — Pulleys — Limiting values for adjustment of centres

- ISO 10530:1992

Water quality — Determination of dissolved sulfide — Photometric method using methylene blue

- ISO 17201-3:2019

Acoustics — Noise from shooting ranges — Part 3: Sound propagation calculations

- ISO 14731:2019

Welding coordination — Tasks and responsibilities

- ISO 16836:2019

Non-destructive testing — Acoustic emission testing — Measurement method for acoustic emission signals in concrete

- ISO 20318-2:2019

Mechanical pencils and leads for general use — Classification, dimensions, quality and test methods — Part 2: Black leads

- ISO 8826-1:1989

Technical drawings — Rolling bearings — Part 1: General simplified representation

- ISO 6545:1992

Acceptance conditions for gear hobbing machines — Testing of the accuracy

- ISO 12570:2000

Hygrothermal performance of building materials and products — Determination of moisture content by drying at elevated temperature

- ISO 735:1977

Oilseed residues — Determination of ash insoluble in hydrochloric acid

- ISO 516:2019

Camera shutters — Timing — General definition and mechanical shutter measurements

- ISO 21802:2019

Assistive products — Guidelines on cognitive accessibility — Daily time management

- ISO 20501:2019

Fine ceramics (advanced ceramics, advanced technical ceramics) — Weibull statistics for strength data

- ISO 19112:2019

Geographic information — Spatial referencing by geographic identifiers

- ISO 21301-2:2019

Plastics — Ethylene-vinyl acetate (EVAC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

- ISO 12759-2:2019

Fans — Efficiency classification for fans — Part 2: Standard losses for drive components

- ISO 21301-1:2019

Plastics — Ethylene-vinyl acetate (EVAC) moulding and extrusion materials — Part 1: Designation system and basis for specifications

- ISO 12759-3:2019

Fans — Efficiency classification for fans — Part 3: Fans without drives at maximum operating speed

- ISO 29281-2:2019

Intelligent transport systems — Localized communications — Part 2: Legacy system support

- ISO/IEC 20546:2019

Information technology — Big data — Overview and vocabulary

- ISO 20613:2019

Sensory analysis — General guidance for the application of sensory analysis in quality control

- ISO 11907-4:1998

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 4: Dynamic decomposition method using a conical radiant heater

- ISO 3438:2013

Subland twist drills for holes prior to tapping screw threads

- ISO 18073:2004

Water quality — Determination of tetra- to octa-chlorinated dioxins and furans — Method using isotope dilution HRGC/HRMS

- ISO 105-A04:1989

Textiles — Tests for colour fastness — Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics

- ISO 28564-3:2019

Public information guidance systems — Part 3: Guidelines for the design and use of information index signs

- ISO 8820-6:2019

Road vehicles — Fuse-links — Part 6: Single-bolt fuse-links

Textiles — Tests for colour fastness — Part A05: Instrumental assessment of change in colour for determination of grey scale rating

- ISO 16838:2019

Non-destructive testing — Acoustic emission testing — Test method for classification of active cracks in concrete structures

- ISO 16837:2019

Non-destructive testing — Acoustic emission testing — Test method for damage qualification of reinforced concrete beams

- ISO 21309-2:2019

Plastics — Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

- ISO 11923:1997

Water quality — Determination of suspended solids by filtration through glass-fibre filters

- ISO 21309-1:2019

Plastics — Ethylene/vinyl alcohol (EVOH) copolymer moulding and extrusion materials — Part 1: Designation system and basis for specifications

- ISO 10517:2019

Powered hand-held hedge trimmers — Safety

- ISO 10304-3:1997

Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate

- ISO 21306-2:2019

Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

- ISO 24508:2019

Ergonomics — Accessible design — Guidelines for designing tactile symbols and characters

- ISO 11452-2:2019

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 2: Absorber-lined shielded enclosure

- ISO 9448-3:2013

Tools for pressing — Guide bushes — Part 3: Form B, ball cage bushes, plain, type 1

- ISO 9448-2:2013

Tools for pressing — Guide bushes — Part 2: Form A, gliding bushes, plain, type 1

- ISO 9698:2019

Water quality — Tritium — Test method using liquid scintillation counting

- ISO 9448-1:2013

Tools for pressing — Guide bushes — Part 1: Forms

- ISO 10649-4:2013

Cutter arbors with parallel key and tenon drive — Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer

- ISO 5636-5:2013

Paper and board — Determination of air permeance (medium range) — Part 5: Gurley method

- ISO 10649-3:2013

Cutter arbors with parallel key and tenon drive — Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer

- ISO 10649-2:2013

Cutter arbors with parallel key and tenon drive — Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface

- ISO 10649-1:2013

Cutter arbors with parallel key and tenon drive — Part 1: General dimensions

- ISO 5636-4:2013

Paper and board — Determination of air permeance (medium range) — Part 4: Sheffield method

- ISO 9448-7:2013

Tools for pressing — Guide bushes — Part 7: Form F, ball cage bushes, flanged, type 1

- ISO 9448-6:2013

Tools for pressing — Guide bushes — Part 6: Form E, gliding bushes, flanged, type 1

- ISO/IEC 5394:2024

Information technology — Criteria for concept systems

- ISO 9448-5:2013

Tools for pressing — Guide bushes — Part 5: Form D, ball cage bushes, headed, type 1

- ISO 16264:2002

Water quality — Determination of soluble silicates by flow analysis (FIA and CFA) and photometric detection

- ISO 9448-4:2013

Tools for pressing — Guide bushes — Part 4: Form C, gliding bushes, headed, type 1

- ISO 21306-1:2019

Plastics — Unplasticized poly(vinyl chloride) (PVC-U) moulding and extrusion materials — Part 1: Designation system and basis for specifications

- ISO 21305-2:2019

Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

- ISO 9022-4:2014

Optics and photonics — Environmental test methods — Part 4: Salt mist

- ISO 15630-1:2019

Steel for the reinforcement and prestressing of concrete — Test methods — Part 1: Reinforcing bars, rods and wire

- ISO 19427:2019

Steel wire ropes — Pre-fabricated parallel wire strands for suspension bridge main cable — Specifications

- ISO 21305-1:2019

Plastics — Polycarbonate (PC) moulding and extrusion materials — Part 1: Designation system and basis for specification

- ISO 21304-1:2019

Plastics — Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials — Part 1: Designation system and basis for specifications

- ISO 10301:1997

Water quality — Determination of highly volatile halogenated hydrocarbons — Gas-chromatographic methods

- ISO 10110-8:2019

Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture

 

- ISO 12020:1997

Water quality — Determination of aluminium — Atomic absorption spectrometric methods

- ISO 21084:2019

Textiles — Method for determination of alkylphenols (AP)

- ISO 10520:1997

Native starch — Determination of starch content — Ewers polarimetric method

- ISO 11369:1997

Water quality — Determination of selected plant treatment agents — Method using high performance liquid chromatography with UV detection after solid-liquid extraction

- ISO 21317:2019

Traditional Chinese medicine — Lonicera japonica flower

- ISO/IEC 9798-3:2019

IT Security techniques — Entity authentication — Part 3: Mechanisms using digital signature techniques

Traditional Chinese medicine — Isatis indigotica root

- ISO 9448-11:2013

Tools for pressing — Guide bushes — Part 11: Form F, ball cage bushes, flanged, type 2

- ISO 9448-10:2013

Tools for pressing — Guide bushes — Part 10: Form E, gliding bushes, flanged, type 2

Tools for pressing — Guide bushes — Part 9: Form B, ball cage bushes, plain, type 2

- ISO 9448-8:2013

Tools for pressing — Guide bushes — Part 8: Form G, gliding bushes, stepped, type 1

- ISO 6451:1982

Plastics coated fabrics — Polyvinyl chloride coatings — Rapid method for checking fusion

- ISO 2162-1:1993

Technical product documentation — Springs — Part 1: Simplified representation

- ISO 1031:1974

Coniferous sawn timber — Defects — Terms and definitions

- ISO 17993:2002

Water quality — Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction

- ISO 21314:2019

Traditional Chinese medicine — Salvia miltiorrhiza root and rhizome

- ISO 5805:1997

Mechanical vibration and shock — Human exposure — Vocabulary

- ISO 7027-2:2019

Water quality — Determination of turbidity — Part 2: Semi-quantitative methods for the assessment of transparency of waters

- ISO 10371:1993

Reinforcement materials — Braided tapes — Basis for a specification

- ISO 8727:1997

Mechanical vibration and shock — Human exposure — Biodynamic coordinate systems

- ISO 10708:1997

Water quality — Evaluation in an aqueous medium of the ultimate aerobic biodegradability of organic compounds — Determination of biochemical oxygen demand in a two-phase closed bottle test

- ISO/IEC 15961-3:2019

Information technology — Data protocol for radio frequency identification (RFID) for item management — Part 3: RFID data constructs

- ISO/CIE 20086:2019

Light and lighting — Energy performance of lighting in buildings

- ISO 20498-1:2019

Traditional Chinese medicine — Computerized tongue image analysis system — Part 1: General requirements

- ISO 15799:2019

Soil quality — Guidance on the ecotoxicological characterization of soils and soil materials

- ISO 4211-3:2013

Furniture — Tests for surface finishes — Part 3: Assessment of resistance to dry heat

- ISO/IEC/IEEE 31320-2:2012

Information technology — Modeling Languages — Part 2: Syntax and Semantics for IDEF1X97 (IDEFobject)

- ISO/IEC 19501:2005

Information technology — Open Distributed Processing — Unified Modeling Language (UML) Version 1.4.2

- ISO 2064:1996

Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness

- ISO 787-25:2019

General methods of test for pigments and extenders — Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments — Colorimetric method

- ISO 21814:2019

Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of aluminium nitride powders

- ISO 22007-6:2014

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 6: Comparative method for low thermal conductivities using a temperature-modulation technique

- ISO/IEC 19479:2019

Information technology for learning, education, and training — Learner mobility achievement information (LMAI)

- ISO 9583:1993

Implants for surgery — Non-destructive testing — Liquid penetrant inspection of metallic surgical implants

- ISO 21813:2019

Fine ceramics (advanced ceramics, advanced technical ceramics) — Methods for chemical analysis of high purity barium titanate powders

- ISO 14880-1:2019

Optics and photonics — Microlens arrays — Part 1: Vocabulary

- ISO 834-9:2003

Fire-resistance tests — Elements of building construction — Part 9: Specific requirements for non-loadbearing ceiling elements

- ISO 4833-2:2013

Microbiology of the food chain — Horizontal method for the enumeration of microorganisms — Part 2: Colony count at 30 °C by the surface plating technique

 

- ISO 9589:1994

Escalators — Building dimensions

- ISO 4037-4:2019

Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields

- ISO 15023-2:2019

Plastics — Poly(vinyl alcohol) (PVAL) materials — Part 2: Determination of properties

- ISO 16355-3:2019

Applications of statistical and related methods to new technology and product development process — Part 3: Quantitative approaches for the acquisition of voice of customer and voice of stakeholder

- ISO 22568-3:2019

Foot and leg protectors — Requirements and test methods for footwear components — Part 3: Metallic perforation resistant inserts

- ISO/ASTM 51956:2013

Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation processing

- ISO/IEC/IEEE 31320-1:2012

Information technology — Modeling Languages — Part 1: Syntax and Semantics for IDEF0

- ISO/IEC 18520:2019

Information technology — Computer graphics, image processing and environmental data representation — Benchmarking of vision-based spatial registration and tracking methods for mixed and augmented reality (MAR)

- ISO 22568-1:2019

Foot and leg protectors — Requirements and test methods for footwear components — Part 1: Metallic toecaps

- ISO 20976-1:2019

Microbiology of the food chain — Requirements and guidelines for conducting challenge tests of food and feed products — Part 1: Challenge tests to study growth potential, lag time and maximum growth rate

- ISO 7175-2:2019

Furniture — Children's cots and folding cots for domestic use — Part 2: Test methods

- ISO 56002:2019

Innovation management — Innovation management system — Guidance

- ISO 22568-2:2019

Foot and leg protectors — Requirements and test methods for footwear component — Part 2: Non-metallic toecaps

- ISO 7175-1:2019

Furniture — Children's cots and folding cots for domestic use — Part 1: Safety requirements

- ISO 7787-4:2002

Dental rotary instruments — Cutters — Part 4: Miniature carbide laboratory cutters

- ISO 9386-1:2000

Power-operated lifting platforms for persons with impaired mobility — Rules for safety, dimensions and functional operation — Part 1: Vertical lifting platforms

- ISO 23907-1:2019

Sharps injury protection — Requirements and test methods — Part 1: Single-use sharps containers

Sustainable Development Goal(s):

 

- ISO 16000-37:2019

Indoor air — Part 37: Measurement of PM2,5 mass concentration

- ISO 9386-2:2000

Power-operated lifting platforms for persons with impaired mobility — Rules for safety, dimensions and functional operation — Part 2: Powered stairlifts for seated, standing and wheelchair users moving in an inclined plane

- ISO/IEC 14771:1999

Information technology — Open Distributed Processing — Naming framework

- ISO 3302-1:2014

Rubber — Tolerances for products — Part 1: Dimensional tolerances

- ISO 9241-220:2019

Ergonomics of human-system interaction — Part 220: Processes for enabling, executing and assessing human-centred design within organizations

- ISO 6721-7:2019

Plastics — Determination of dynamic mechanical properties — Part 7: Torsional vibration — Non-resonance method

- ISO 6721-5:2019

Plastics — Determination of dynamic mechanical properties — Part 5: Flexural vibration — Non-resonance method

- ISO 11905-1:1997

Water quality — Determination of nitrogen — Part 1: Method using oxidative digestion with peroxodisulfate

- ISO 6721-6:2019

Plastics — Determination of dynamic mechanical properties — Part 6: Shear vibration — Non-resonance method

- ISO 11138-7:2019

Sterilization of health care products — Biological indicators — Part 7: Guidance for the selection, use and interpretation of results

- ISO 20080:2019

Road vehicles — Information for remote diagnostic support — General requirements, definitions and use cases

- ISO 6721-2:2019

Plastics — Determination of dynamic mechanical properties — Part 2: Torsion-pendulum method

- ISO 6721-4:2019

Plastics — Determination of dynamic mechanical properties — Part 4: Tensile vibration — Non-resonance method

- ISO 6721-1:2019

Plastics — Determination of dynamic mechanical properties — Part 1: General principles

- ISO 8497:1994

Thermal insulation — Determination of steady-state thermal transmission properties of thermal insulation for circular pipes

- ISO 14829:2002

Freight containers — Straddle carriers for freight container handling — Calculation of stability

- ISO 5421:1977

Ground high speed steel tool bits

- ISO 11499:2014

Dentistry — Single-use cartridges for local anaesthetics

- ISO 16000-38:2019

Indoor air — Part 38: Determination of amines in indoor and test chamber air — Active sampling on samplers containing phosphoric acid impregnated filters

- ISO 3405:2019

Petroleum and related products from natural or synthetic sources — Determination of distillation characteristics at atmospheric pressure

- ISO 799-1:2019

Ships and marine technology — Pilot ladders — Part 1: Design and specification

- ISO 56003:2019

Innovation management — Tools and methods for innovation partnership — Guidance

- ISO 12871:2019

Olive oils and olive-pomace oils — Determination of aliphatic and triterpenic alcohols content by capillary gas chromatography

- ISO 20677:2019

Image technology colour management — Extensions to architecture, profile format and data structure

- ISO 10540-3:2002

Animal and vegetable fats and oils — Determination of phosphorus content — Part 3: Method using inductively coupled plasma (ICP) optical emission spectroscopy

- ISO 2924:1973

Solid and segmental circular saws for cold cutting of metals — Interchangeability dimensions of the drive — Saw diameter range 224 to 2 240 mm

- ISO 4037-1:2019

Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 1: Radiation characteristics and production methods

- ISO 2935:1974

Circular saw blades for woodworking — Dimensions

- ISO 15985:2014

Plastics — Determination of the ultimate anaerobic biodegradation under high-solids anaerobic-digestion conditions — Method by analysis of released biogas

- ISO 4037-2:2019

Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 2: Dosimetry for radiation protection over the energy ranges from 8 keV to 1,3 MeV and 4 MeV to 9 MeV

- ISO 16964:2019

Gas cylinders — Flexible hoses assemblies — Specification and testing

- ISO 4037-3:2019

Radiological protection — X and gamma reference radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy — Part 3: Calibration of area and personal dosemeters and the measurement of their response as a function of energy and angle of incidence

- ISO 20035:2019

Intelligent transport systems — Cooperative adaptive cruise control systems (CACC) — Performance requirements and test procedures

- ISO 21670:2014

Fasteners — Hexagon weld nuts with flange

- ISO 14592-2:2002

Water quality — Evaluation of the aerobic biodegradability of organic compounds at low concentrations — Part 2: Continuous flow river model with attached biomass

- ISO 1223:2003

Cinematography — Picture areas for motion-picture films for television — Position and dimensions

- ISO 161-2:1996

Thermoplastics pipes for the conveyance of fluids — Nominal outside diameters and nominal pressures — Part 2: Inch-based series

- ISO 14531-1:2002

Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 1: Pipes

- ISO 50045:2019

Technical guidelines for the evaluation of energy savings of thermal power plants

- ISO 6474-1:2019

Implants for surgery — Ceramic materials — Part 1: Ceramic materials based on high purity alumina

- ISO 22423:2019

Foil bearings — Performance testing of foil thrust bearings — Testing of static load capacity, bearing torque, friction coefficient and lifetime

- ISO 5407:1981

As-sintered hardmetal pellets used in heading dies — Dimensions and tolerances

- ISO 18949:2019

Imaging materials — Reflection colour photographic prints — Method for testing stability under low humidity conditions

- ISO 14592-1:2002

Water quality — Evaluation of the aerobic biodegradability of organic compounds at low concentrations — Part 1: Shake-flask batch test with surface water or surface water/sediment suspensions

- ISO 296:1991

Machine tools — Self-holding tapers for tool shanks

- ISO 6511:1982

Building construction — Modular coordination — Modular floor plane for vertical dimensions

- ISO 17223:2014

Plastics — Determination of yellowness index and change in yellowness index

- ISO 50021:2019

Energy management and energy savings — General guidelines for selecting energy savings evaluators

- ISO 19967-1:2019

Heat pump water heaters — Testing and rating for performance — Part 1: Heat pump water heater for hot water supply

- ISO 11169:1993

Machinery for forestry — Wheeled special machines — Vocabulary, performance test methods and criteria for brake systems

- ISO 18434-2:2019

Condition monitoring and diagnostics of machine systems — Thermography — Part 2: Image interpretation and diagnostics

- ISO 16712:2005

Water quality — Determination of acute toxicity of marine or estuarine sediment to amphipods

- ISO 22241-1:2019

Diesel engines — NOx reduction agent AUS 32 — Part 1: Quality requirements

- ISO 22241-2:2019

Diesel engines — NOx reduction agent AUS 32 — Part 2: Test methods

- ISO 16839:2013

Steel wire ropes — Determination of the transverse rigidity of steel wire ropes under no axial load condition

- ISO 16855:2013

Ships and marine technology — Loose gear of lifting appliances on ships — General requirements

- ISO 16856:2013

Ships and marine technology — Loose gear of lifting appliances on ships — Hooks

- ISO 12647-1:2013

Graphic technology — Process control for the production of half-tone colour separations, proof and production prints — Part 1: Parameters and measurement methods

- ISO 20046:2019

Radiological protection — Performance criteria for laboratories using Fluorescence In Situ Hybridization (FISH) translocation assay for assessment of exposure to ionizing radiation

- ISO 19111:2019

Geographic information — Referencing by coordinates

- ISO 20740:2019

Martial arts — Wushu Taiji sword — Requirements and test method

- ISO 15781:2019

Photography — Digital still cameras — Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time lag

- ISO 10893-7:2019

Non-destructive testing of steel tubes — Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

- ISO 10893-6:2019

Non-destructive testing of steel tubes — Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

- ISO 16588:2002

Water quality — Determination of six complexing agents — Gas-chromatographic method

- ISO 5982:2019

Mechanical vibration and shock — Range of idealized values to characterize human biodynamic response under whole-body vibration

- ISO 16857:2013

Ships and marine technology — Loose gear of lifting appliances on ships — Shackles

- ISO 16858:2013

Ships and marine technology — Loose gear of lifting appliances on ships — Pulleys

- ISO 6410-2:1993

Technical drawings — Screw threads and threaded parts — Part 2: Screw thread inserts

- ISO 8601-1:2019

Date and time — Representations for information interchange — Part 1: Basic rules

- ISO 5378:1978

Starches and derived products — Determination of nitrogen content by the Kjeldahl method — Spectrophotometric method

- ISO 6410-1:1993

Technical drawings — Screw threads and threaded parts — Part 1: General conventions

- ISO 6411:1982

Technical drawings — Simplified representation of centre holes

- ISO 27501:2019

The human-centred organization — Guidance for managers

- ISO 1954:2013

Plywood — Tolerances on dimensions

- ISO 13315-8:2019

Environmental management for concrete and concrete structures — Part 8: Environmental labels and declarations

- ISO 11607-2:2019

Packaging for terminally sterilized medical devices — Part 2: Validation requirements for forming, sealing and assembly processes

- ISO 11117:2019

Gas cylinders — Valve protection caps and guards — Design, construction and tests

- ISO 19642-5:2019

Road vehicles — Automotive cables — Part 5: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core copper conductor cables

- ISO 19636:2019

Ships and marine technology — General requirements for inclinometers used for the determination of trim and list of LNG carriers

- ISO 19642-6:2019

Road vehicles — Automotive cables — Part 6: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. single core aluminium conductor cables

- ISO 13358:1997

Water quality — Determination of easily released sulfide

- ISO 19642-3:2019

Road vehicles — Automotive cables — Part 3: Dimensions and requirements for 30 V a.c. or 60 V d.c. single core copper conductor cables

- ISO 19642-4:2019

Road vehicles — Automotive cables — Part 4: Dimensions and requirements for 30 V a.c. and 60 V d.c. single core aluminium conductor cables

- ISO 10320:2019

Geosynthetics — Identification on site

- ISO 19642-9:2019

Road vehicles — Automotive cables — Part 9: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed, screened or unscreened multi or single core copper conductor cables

- ISO 18856:2004

Water quality — Determination of selected phthalates using gas chromatography/mass spectrometry

- ISO 19642-10:2019

Road vehicles — Automotive cables — Part 10: Dimensions and requirements for 600 V a.c. or 900 V d.c. and 1 000 V a.c. or 1 500 V d.c. round, sheathed, screened or unscreened multi or single core aluminium conductor cables

- ISO 18857-1:2005

Water quality — Determination of selected alkylphenols — Part 1: Method for non-filtered samples using liquid-liquid extraction and gas chromatography with mass selective detection

 ISO 19642-7:2019

Road vehicles — Automotive cables — Part 7: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core copper conductor cables

- ISO 8299:2019

Nuclear fuel technology — Determination of the isotopic and elemental uranium and plutonium concentrations of nuclear materials in nitric acid solutions by thermal-ionization mass spectrometry

- ISO 19642-8:2019

Road vehicles — Automotive cables — Part 8: Dimensions and requirements for 30 V a.c. or 60 V d.c. round, sheathed, screened or unscreened multi or single core aluminium conductor cables

- ISO 5396:1977

Hardmetal heading dies — Terminology

- ISO 14839-2:2004

Mechanical vibration — Vibration of rotating machinery equipped with active magnetic bearings — Part 2: Evaluation of vibration

- ISO 8573-7:2003

Compressed air — Part 7: Test method for viable microbiological contaminant content

- ISO 5502:1992

Oilseed residues — Preparation of test samples

- ISO 6157-1:1988

Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements

- ISO 1964:1987

Shipbuilding — Indication of details on the general arrangement plans of ships

- ISO 11423-2:1997

Water quality — Determination of benzene and some derivatives — Part 2: Method using extraction and gas chromatography

- ISO 16428:2005

Implants for surgery — Test solutions and environmental conditions for static and dynamic corrosion tests on implantable materials and medical devices

IISO 9161:2019

Uranium dioxide powder — Determination of apparent density and tap density

- ISO 11423-1:1997

Water quality — Determination of benzene and some derivatives — Part 1: Head-space gas chromatographic method

- ISO 19926-1:2019

Meteorology — Weather radar — Part 1: System performance and operation

- ISO 16429:2004

Implants for surgery — Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods

- ISO 15987:2003

Plastics — Film and sheeting — Biaxially oriented polyamide (nylon) films

- ISO 12647-3:2013

Graphic technology — Process control for the production of half-tone colour separations, proofs and production prints — Part 3: Coldset offset lithography on newsprint

- ISO 5572:1987

Shipbuilding and marine structures — Numbering of equipment and structural elements in ships

- ISO 25178-607:2019

Geometrical product specifications (GPS) — Surface texture: Areal — Part 607: Nominal characteristics of non-contact (confocal microscopy) instruments

- ISO 15630-2:2019

Steel for the reinforcement and prestressing of concrete — Test methods — Part 2: Welded fabric and lattice girders

- ISO 6964:2019

Polyolefin pipes and fittings — Determination of carbon black content by calcination and pyrolysis — Test method

- ISO 5794-2:2014

Rubber compounding ingredients — Silica, precipitated, hydrated — Part 2: Evaluation procedures in styrene-butadiene rubber

- ISO 25178-600:2019

Geometrical product specifications (GPS) — Surface texture: Areal — Part 600: Metrological characteristics for areal topography measuring methods

- ISO 10110-12:2019

Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces

- ISO/IEC 14496-33:2019

Information technology — Coding of audio-visual objects — Part 33: Internet video coding

- ISO 7663:2014

Halogenated isobutene-isoprene rubber (BIIR and CIIR) — Evaluation procedures

- ISO 8102-6:2019

Electrical requirements for lifts, escalators and moving walks — Part 6: Programmable electronic systems in safety-related applications for escalators and moving walks (PESSRAE)

- ISO 16902-1:2003

Hydraulic fluid power — Test code for the determination of sound power levels of pumps using sound intensity techniques: Engineering method — Part 1: Pumps

- ISO 16402:2008

Implants for surgery — Acrylic resin cement — Flexural fatigue testing of acrylic resin cements used in orthopaedics

- ISO 16048:2003

Passivation of corrosion-resistant stainless-steel fasteners

- ISO 17353:2004

Water quality — Determination of selected organotin compounds — Gas chromatographic method

- ISO 21446:2019

Infant formula and adult nutritionals — Determination of trans and total (cis + trans) vitamin K1 content — Normal phase HPLC

- ISO 3952-3:1979

Kinematic diagrams — Graphical symbols

- ISO 3952-4:1984

Kinematic diagrams — Graphical symbols

- ISO 4190-3:1982

Passenger lift installations — Part 3: Service lifts class V

- ISO 3952-1:1981

Kinematic diagrams — Graphical symbols

- ISO 5667-9:1992

Water quality — Sampling — Part 9: Guidance on sampling from marine waters

- ISO 3952-2:1981

Kinematic diagrams — Graphical symbols

- ISO 18256-1:2019

Nuclear fuel technology — Dissolution of plutonium dioxide-containing materials — Part 1: Dissolution of plutonium dioxide powders

- ISO 18256-2:2019

Nuclear fuel technology — Dissolution of plutonium dioxide-containing materials — Part 2: Dissolution of MOX pellets and powders

- ISO 3295:1975

Narrow bandsaw blades for woodworking — Dimensions

- ISO 21494:2019

Space systems — Magnetic testing

- ISO 21618:2019

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method

- ISO 9092:2019

Nonwovens — Vocabulary

- ISO 10642:2019

Fasteners — Hexagon socket countersunk head screws with reduced loadability

- ISO 21703:2019

Surface active agents — Microbiology — Microbiological test methods for liquid hand dishwashing

- ISO 11413:2019

Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting

- ISO 18516:2019

Surface chemical analysis — Determination of lateral resolution and sharpness in beam based methods with a range from nanometres to micrometres

- IEC/IEEE 80005-1:2019

Utility connections in port — Part 1: High voltage shore connection (HVSC) systems — General requirements

- ISO 8990:1994

Thermal insulation — Determination of steady-state thermal transmission properties — Calibrated and guarded hot box

- ISO/IEC 18039:2019

Information technology — Computer graphics, image processing and environmental data representation — Mixed and augmented reality (MAR) reference model

- ISO 8302:1991

Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus

- ISO 10720:1997

Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas

- ISO 273:1979

Fasteners — Clearance holes for bolts and screws

- ISO 3969:1979

Shipbuilding — Inland vessels — Operational documentation

- ISO/IEC 23005-5:2019

Information technology — Media context and control — Part 5: Data formats for interaction devices

- ISO 1743:1982

Glucose syrup — Determination of dry matter content — Refractive index method

- ISO/IEC 20933:2019

Information technology — Distributed application platforms and services (DAPS) — Framework for distributed real-time access systems

- ISO 4491-3:1997

Metallic powders — Determination of oxygen content by reduction methods — Part 3: Hydrogen-reducible oxygen

- ISO 15037-1:2019

Road vehicles — Vehicle dynamics test methods — Part 1: General conditions for passenger cars

- ISO 14655:1999

Epoxy-coated strand for the prestressing of concrete

- ISO 15785:2002

Technical drawings — Symbolic presentation and indication of adhesive, fold and pressed joints

- ISO 18868:2013

Commercial road vehicles — Coupling equipment between vehicles in multiple vehicle combinations — Strength requirements

- ISO 3310-2:2013

Test sieves — Technical requirements and testing — Part 2: Test sieves of perforated metal plate

- ISO 24613-1:2024

Language resource management — Lexical markup framework (LMF) — Part 1: Core model

- ISO 2423:1982

Acceptance conditions for radial drilling machines with the arm adjustable in height — Testing of accuracy

- ISO/IEC 23001-14:2019

Information technology — MPEG systems technologies — Part 14: Partial file format

- ISO/IEC/IEEE 15026-1:2019

Systems and software engineering — Systems and software assurance — Part 1: Concepts and vocabulary

- ISO 7721:1983

Countersunk head screws — Head configuration and gauging

- ISO 13851:2019

Safety of machinery — Two-hand control devices — Principles for design and selection

- ISO 5832-14:2019

Implants for surgery — Metallic materials — Part 14: Wrought titanium 15-molybdenum 5-zirconium 3-aluminium alloy

- ISO 13782:2019

Implants for surgery — Metallic materials — Unalloyed tantalum for surgical implant applications

- ISO 5832-9:2019

Implants for surgery — Metallic materials — Part 9: Wrought high nitrogen stainless steel

- ISO 5832-12:2019

Implants for surgery — Metallic materials — Part 12: Wrought cobalt-chromium-molybdenum alloy

- ISO 18692-2:2019

Fibre ropes for offshore stationkeeping — Part 2: Polyester

- ISO 6474-2:2019

Implants for surgery — Ceramic materials — Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement

- ISO/IEC 24730-62:2013

Information technology — Real time locating systems (RTLS) — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface

- ISO/IEC 24730-61:2013

Information technology — Real time locating systems (RTLS) — Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface

- ISO 9222-2:1989

Technical drawings — Seals for dynamic application — Part 2: Detailed simplified representation

- ISO 9222-1:1989

Technical drawings — Seals for dynamic application — Part 1: General simplified representation

- ISO 7721-2:1990

Countersunk flat head screws — Part 2: Penetration depth of cross recesses

- ISO 1179-1:2013

Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports

- ISO 9831:1998

Animal feeding stuffs, animal products, and faeces or urine — Determination of gross calorific value — Bomb calorimeter method

- ISO 22157:2019

Bamboo structures — Determination of physical and mechanical properties of bamboo culms — Test methods

- ISO 12010:2019

Water quality — Determination of short-chain polychlorinated alkanes (SCCP) in water — Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)

- ISO 8289-2:2019

Vitreous and porcelain enamels — Low-voltage test for detecting and locating defects — Part 2: Slurry test for profiled surfaces

- ISO 2445:1972

Joints in building — Fundamental principles for design

- ISO 14939:2001

Animal feeding stuffs — Determination of carbadox content — Method using high-performance liquid chromatography

ICS:

 

- ISO 1968:2004

Fibre ropes and cordage — Vocabulary

- ISO 13900:1997

Steel — Determination of boron content — Curcumin spectrophotometric method after distillation

- ISO 13902:1997

Steel and iron — Determination of high sulfur content — Infrared absorption method after combustion in an induction furnace

- ISO 17682:2013

Ships and marine technology — Methodology for ship launching utilizing air bags

- ISO 5952:2019

Steel sheet, hot-rolled, of structural quality with improved atmospheric corrosion resistance

- ISO 16812:2019

Petroleum, petrochemical and natural gas industries — Shell-and-tube heat exchangers

- ISO 3158:1976

Timekeeping instruments — Symbolization of control positions

- ISO 17892-11:2019

Geotechnical investigation and testing — Laboratory testing of soil — Part 11: Permeability tests

- ISO 2203:1973

Technical drawings — Conventional representation of gears

- ISO 11922-2:1997

Thermoplastics pipes for the conveyance of fluids — Dimensions and tolerances — Part 2: Inch-based series

- ISO 15483:1999

Cross recessed raised countersunk head drilling screws with tapping screw thread

- ISO 15481:1999

Cross recessed pan head drilling screws with tapping screw thread

- ISO 15482:1999

Cross recessed countersunk head drilling screws with tapping screw thread

- ISO 15628:2013

Intelligent transport systems — Dedicated short range communication (DSRC) — DSRC application layer

- ISO 20483:2013

Cereals and pulses — Determination of the nitrogen content and calculation of the crude protein content — Kjeldahl method

- ISO/IEC 15444-6:2013

Information technology — JPEG 2000 image coding system — Part 6: Compound image file format

- ISO 2206:1987

Packaging — Complete, filled transport packages — Identification of parts when testing

- ISO 8030:2014

Rubber and plastics hoses — Method of test for flammability

- ISO 6050:1987

Shipbuilding — Bulbous bow and side thruster symbols

- ISO 2005:2014

Rubber latex, natural, concentrate — Determination of sludge content

- ISO 21546:2019

Paints and varnishes — Determination of the resistance to rubbing using a linear abrasion tester (crockmeter)

- ISO 17925:2004

Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry

- ISO 19671:2018

Additional lubricants for male natural rubber latex condoms — Effect on condom strength

- ISO 17049:2013

Accessible design — Application of braille on signage, equipment and appliances

- ISO 2017-1:2005

Mechanical vibration and shock — Resilient mounting systems — Part 1: Technical information to be exchanged for the application of isolation systems

- ISO 22404:2019

Plastics — Determination of the aerobic biodegradation of non-floating materials exposed to marine sediment — Method by analysis of evolved carbon dioxide

- ISO 1656:2019

Rubber, raw natural, and rubber latex, natural — Determination of nitrogen content

- ISO 11833-2:1998

Plastics — Unplasticized poly(vinyl chloride) sheets — Types, dimensions and characteristics — Part 2: Sheets of thickness less than 1 mm

- ISO 5783:2019

Hydraulic fluid power — Code for identification of valve mounting surfaces and cartridge valve cavities

- ISO 8178-3:2019

Reciprocating internal combustion engines — Exhaust emission measurement — Part 3: Test procedures for measurement of exhaust gas smoke emissions from compression ignition engines using a filter type smoke meter

- ISO 10664:2014

Hexalobular internal driving feature for bolts and screws

- ISO 11783-12:2019

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 12: Diagnostics services

- ISO 580:2005

Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating

 

- ISO 5815-2:2003

Water quality — Determination of biochemical oxygen demand after n days (BODn) — Part 2: Method for undiluted samples

- ISO 9194:1987

Bases for design of structures — Actions due to the self-weight of structures, non-structural elements and stored materials — Density

- ISO 7771:1985

Textiles — Determination of dimensional changes of fabrics induced by cold-water immersion

- ISO 18314-4:2024

Analytical colorimetry — Part 4: Metamerism index for pairs of samples for change of illuminant

- ISO 16322-1:2005

Textiles — Determination of spirality after laundering — Part 1: Percentage of wale spirality change in knitted garments

- ISO 6800:1997

Animal and vegetable fats and oils — Determination of the composition of fatty acids in the 2-position of the triglyceride molecules

- ISO/IEC 14143-6:2012

Information technology — Software measurement — Functional size measurement — Part 6: Guide for use of ISO/IEC 14143 series and related International Standards

- ISO 7176-7:1998

Wheelchairs — Part 7: Measurement of seating and wheel dimensions

- ISO 18766:2014

Rubber, vulcanized or thermoplastic — Low temperature testing — General introduction and guide

- ISO 2231:1989

Rubber- or plastics-coated fabrics — Standard atmospheres for conditioning and testing

- ISO 4411:2019

Hydraulic fluid power — Valves — Determination of differential pressure/flow rate characteristics

- ISO 7176-15:1996

Wheelchairs — Part 15: Requirements for information disclosure, documentation and labelling

- ISO 21360-3:2019

Vacuum technology — Standard methods for measuring vacuum pump performance — Part 3: Specific parameters for mechanical booster vacuum pumps

- ISO 1051:1999

Rivet shank diameters

- ISO 8579-1:2002

Acceptance code for gear units — Part 1: Test code for airborne sound

- ISO 10691:2004

Gas cylinders — Refillable welded steel cylinders for liquified petroleum gas (LPG) — Procedures for checking before, during and after filling

- ISO 10464:2004

Gas cylinders — Refillable welded steel cylinders for liquefied petroleum gas (LPG) — Periodic inspection and testing

- ISO 5007:2003

Agricultural wheeled tractors — Operator's seat — Laboratory measurement of transmitted vibration

- ISO/IEC 15938-5:2003

Information technology — Multimedia content description interface — Part 5: Multimedia description schemes

- ISO/IEC 13818-2:2013

Information technology — Generic coding of moving pictures and associated audio information — Part 2: Video

- ISO 4248:1978

Jig bushes — Definitions and nomenclature

- ISO 2370:2019

Textiles — Determination of fineness of flax fibres — Permeametric methods

- ISO 2772:2019

Test conditions for box type vertical drilling machines — Testing of the accuracy

- ISO 3939:1977

Fluid power systems and components — Multiple lip packing sets — Methods for measuring stack heights

- ISO 11607-1:2019

Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems

- ISO 21370:2019

Traditional Chinese medicine — Dendrobium officinale stem

- ISO 6654:1991

Animal feeding stuffs — Determination of urea content

- ISO 3868:1976

Metallic and other non-organic coatings — Measurement of coating thicknesses — Fizeau multiple-beam interferometry method

- ISO 15106-3:2003

Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 3: Electrolytic detection sensor method

- ISO 24513:2019

Service activities relating to drinking water supply, wastewater and stormwater systems — Vocabulary

- ISO 4869-6:2019

Acoustics — Hearing protectors — Part 6: Determination of sound attenuation of active noise reduction earmuffs

- ISO 3269:2019

Fasteners — Acceptance inspection

- ISO 10359-1:1992

Water quality — Determination of fluoride — Part 1: Electrochemical probe method for potable and lightly polluted water

- ISO 13588:2019

Non-destructive testing of welds — Ultrasonic testing — Use of automated phased array technology

- ISO 20150:2019

Footwear and footwear components — Quantitative challenge test method to assess antifungal activity

- ISO 21286:2019

Soil quality — Identification of ecotoxicological test species by DNA barcoding

- ISO 15512:2019

Plastics — Determination of water content

- ISO/ASME 14414:2019

Pump system energy assessment

- ISO 22700:2019

Leather — Measuring the colour and colour difference of finished leather

- ISO 3948:1977

Shipbuilding — Inland vessels — Compressed-air systems — Pressure ranges

- ISO 3823-1:1997

Dental rotary instruments — Burs — Part 1: Steel and carbide burs

- ISO 2553:2019

Welding and allied processes — Symbolic representation on drawings — Welded joints

- ISO 6947:2019

Welding and allied processes — Welding positions

- ISO 11929-1:2019

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 1: Elementary applications

- ISO 19115-2:2019

Geographic information — Metadata — Part 2: Extensions for acquisition and processing

- ISO 13328:2000

Motorcycle tyres — Measurement of tyre rolling circumference — Loaded new tyres

- ISO/ASTM 52701:2013

Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing

- ISO 2421:2003

Coated abrasives — Cylindrical sleeves

- ISO 1268-8:2004

Fibre-reinforced plastics — Methods of producing test plates — Part 8: Compression moulding of SMC and BMC

- ISO 1268-9:2003

Fibre-reinforced plastics — Methods of producing test plates — Part 9: Moulding of GMT/STC

- ISO 20954-1:2019

Digital cameras — Measurement method for image stabilization performance — Part 1: Optical systems

- ISO 8084:2003

Machinery for forestry — Operator protective structures — Laboratory tests and performance requirements

- ISO 8573-4:2019

Compressed air — Contaminant measurement — Part 4: Particle content

- ISO/IEC 19086-4:2019

Cloud computing — Service level agreement (SLA) framework — Part 4: Components of security and of protection of PII

- ISO 17072-1:2019

Leather — Chemical determination of metal content — Part 1: Extractable metals

- ISO 20146:2019

Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges

- ISO 21940-1:2019

Mechanical vibration — Rotor balancing — Part 1: Introduction

- ISO 3881:1977

Building construction — Modular co-ordination — Stairs and stair openings — Co-ordinating dimensions

- ISO 7346-3:1996

Water quality — Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] — Part 3: Flow-through method

- ISO 24678-1:2019

Fire safety engineering — Requirements governing algebraic formulae — Part 1: General requirements

- ISO 633:2019

Cork — Vocabulary

- ISO 24678-7:2019

Fire safety engineering — Requirements governing algebraic formulae — Part 7: Radiation heat flux received from an open pool fire

- ISO 11551:2019

Optics and photonics — Lasers and laser-related equipment — Test method for absorptance of optical laser components

- ISO 12725:2019

Nickel and nickel alloy castings

- ISO 22125-1:2019

Water quality — Technetium-99 — Part 1: Test method using liquid scintillation counting

- ISO/ASTM 51401:2013

Practice for use of a dichromate dosimetry system

- ISO 8573-6:2003

Compressed air — Part 6: Test methods for gaseous contaminant content

- ISO 230-6:2002

Test code for machine tools — Part 6: Determination of positioning accuracy on body and face diagonals (Diagonal displacement tests)

- ISO 17355:2007

Space data and information transfer systems — CCSDS file delivery protocol

- ISO/IEC 13250-3:2013

Information technology — Topic Maps — Part 3: XML syntax

- ISO 8165-1:1992

Water quality — Determination of selected monovalent phenols — Part 1: Gas-chromatographic method after enrichment by extraction

- ISO 11929-3:2019

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 3: Applications to unfolding methods

- ISO 10669:1999

Plain washers for tapping screw and washer assemblies — Normal and large series — Product grade A

- ISO 11929-2:2019

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation — Fundamentals and application — Part 2: Advanced applications

- ISO 11933-2:1997

Components for containment enclosures — Part 2: Gloves, welded bags, gaiters for remote - handling tongs and for manipulators

- ISO 10666:1999

Drilling screws with tapping screw thread — Mechanical and functional properties

- ISO 20921:2019

Textiles — Determination of stable nitrogen isotope ratio in cotton fibres

- ISO 22125-2:2019

Water quality — Technetium-99 — Part 2: Test method using inductively coupled plasma mass

- ISO 22180:2019

CVD diamond tools — Categorization

- ISO 22212:2019

Traditional Chinese medicine — Gastrodia elata tuber

- ISO 4899:1993

Textile-glass-reinforced thermosetting plastics — Properties and test methods

- ISO 10648-1:1997

Containment enclosures — Part 1: Design principles

- ISO 20163:2019

Vulcanized rubber — Determination of free sulfur by gas chromatography (GC) and high performance liquid chromatography (HPLC)

- ISO 18828-5:2019

Industrial automation systems and integration — Standardized procedures for production systems engineering — Part 5: Manufacturing change management

- ISO 20927:2019

Rubber compounding ingredients — Precipitated silica — Determination of aggregate size distribution by disc centrifuge

- ISO 22117:2019

Microbiology of the food chain — Specific requirements and guidance for proficiency testing by interlaboratory comparison

- ISO 2921:2019

Rubber, vulcanized — Determination of low-temperature characteristics — Temperature-retraction procedure (TR test)

- ISO 3451-1:2019

Plastics — Determination of ash — Part 1: General methods

- ISO 11040-6:2019

Prefilled syringes — Part 6: Plastic barrels for injectables and sterilized subassembled syringes ready for filling

- ISO 21248:2019

Information and documentation — Quality assessment for national libraries

- ISO 10704:2019

Water quality — Gross alpha and gross beta activity — Test method using thin source deposit

- ISO 24679-1:2019

Fire safety engineering — Performance of structures in fire — Part 1: General

- ISO 124:2014

Latex, rubber — Determination of total solids content

- ISO 15908:2002

Adhesives for thermoplastic piping systems — Test method for the determination of thermal stability of adhesives

- ISO 3320:2013

Fluid power systems and components — Cylinder bores and piston rod diameters and area ratios — Metric series

- ISO 17221:2014

Plastics — Determination of image clarity (degree of sharpness of reflected or transmitted image)

- ISO 9782:1993

Plastics — Reinforced moulding compounds and prepregs — Determination of apparent volatile-matter content

- ISO 11933-1:1997

Components for containment enclosures — Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units

- ISO 9887:1992

Water quality — Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium — Semi-continuous activated sludge method (SCAS)

- ISO 12232:2019

Photography — Digital still cameras — Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index

- ISO 2710-2:2019

Reciprocating internal combustion engines — Vocabulary — Part 2: Terms for engine maintenance

- ISO 14309:2019

Rubber, vulcanized or thermoplastic — Determination of volume and/or surface resistivity

- ISO 15480:2019

Fasteners — Hexagon washer head drilling screws with tapping screw thread

- ISO 789-6:2019

Agricultural tractors — Test procedures — Part 6: Centre of gravity

- ISO 19065-2:2019

Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

- ISO 7053:2019

Fasteners — Hexagon washer head tapping screws

- ISO 19062-2:2019

Plastics — Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties

- ISO 1081:2013

Belt drives — V-belts and V-ribbed belts, and corresponding grooved pulleys — Vocabulary

- ISO 10245-3:2019

Cranes — Limiting and indicating devices — Part 3: Tower cranes

- ISO 13090-1:1998

Mechanical vibration and shock — Guidance on safety aspects of tests and experiments with people — Part 1: Exposure to whole-body mechanical vibration and repeated shock

- ISO 13753:1998

Mechanical vibration and shock — Hand-arm vibration — Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system

- ISO 17734-2:2013

Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry — Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives

- ISO 20535:2019

Footwear — Test method for insoles and insocks — Dimensional change after cycle of wetting and drying

- ISO 7971-2:2019

Cereals — Determination of bulk density, called mass per hectolitre — Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

- ISO 5979:1982

Rubber or plastics coated fabrics — Determination of flexibility — Flat loop method

- ISO 6929:2013

Steel products — Vocabulary

- ISO 21300:2019

Traditional Chinese medicine — Guidelines and specification for Chinese materia medica

- ISO 21600:2019

Technical product documentation (TPD) — General requirements of mechanical product digital manuals

- ISO 7971-3:2019

Cereals — Determination of bulk density, called mass per hectolitre — Part 3: Routine method

ICS:

 

- ISO/IEC 14752:2000

Information technology — Open Distributed Processing — Protocol support for computational interactions

- ISO 9927-3:2019

Cranes — Inspections — Part 3: Tower cranes

- ISO 6101-1:2019

Rubber — Determination of metal content by atomic absorption spectrometry — Part 1: Determination of zinc content

- ISO 7752-3:2013

Cranes — Control layout and characteristics — Part 3: Tower cranes

- ISO/IEC 14753:1999

Information technology — Open Distributed Processing — Interface references and binding

- ISO 25577:2013

Information and documentation — MarcXchange

- ISO 8224-2:1991

Traveller irrigation machines — Part 2: Softwall hose and couplings — Test methods

- ISO 9866-1:1991

Textiles — Effect of dry heat on fabrics under low pressure — Part 1: Procedure for dry-heat treatment of fabrics

- ISO 7305:2019

Milled cereal products — Determination of fat acidity

- ISO 8892:1987

Oilseed residues — Determination of total residual hexane

- ISO 9866-2:1991

Textiles — Effect of dry heat on fabrics under low pressure — Part 2: Determination of dimensional change in fabrics exposed to dry heat

- ISO 17771:2003

Plastics — Thermoset moulding compounds — Determination of the degree of fibre wetting in SMC

- ISO 8226-2:1990

Paper and board — Measurement of hygroexpansivity — Part 2: Hygroexpansivity up to a maximum relative humidity of 86 %

- ISO 9463:2019

Nuclear energy — Nuclear fuel technology — Determination of plutonium in nitric acid solutions by spectrophotometry

- ISO 7662:1988

Rubber and plastics hoses — Determination of abrasion of lining

- ISO 14033:2019

Environmental management — Quantitative environmental information — Guidelines and examples

- ISO 23753-1:2019

Soil quality — Determination of dehydrogenases activity in soils — Part 1: Method using triphenyltetrazolium chloride (TTC)

- ISO 8826-2:1994

Technical drawings — Rolling bearings — Part 2: Detailed simplified representation

- ISO 14851:2019

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium — Method by measuring the oxygen demand in a closed respirometer

- ISO 23753-2:2019

Soil quality — Determination of dehydrogenases activity in soils — Part 2: Method using iodotetrazolium chloride (INT)

- ISO 16696-1:2019

Timber structures — Cross laminated timber — Part 1: Component performance, production requirements and certification scheme

- ISO 21683:2019

Pigments and extenders — Determination of experimentally simulated nano-object release from paints, varnishes and pigmented plastics

- ISO 2393:2014

Rubber test mixes — Preparation, mixing and vulcanization — Equipment and procedures

- ISO 2476:2014

Butadiene rubber (BR) — Solution-polymerized types — Evaluation procedures

- ISO 4190-2:2001

Lift (US: Elevator) installation — Part 2: Class IV lifts

- ISO 3901:2019

Information and documentation — International Standard Recording Code (ISRC)

- ISO/IEC 14756:1999

Information technology — Measurement and rating of performance of computer-based software systems

- ISO 8311:2013

Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels — Calibration of membrane tanks and independent prismatic tanks in ships — Manual and internal electro-optical distance-ranging methods