- ISO 17168-2:2018

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 2: Removal of acetaldehyde

- ISO 17168-4:2018

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 4: Removal of formaldehyde

- ISO 17168-3:2018

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 3: Removal of toluene

- ISO 12985-2:2018

Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 2: Determination of apparent density and of open porosity using a hydrostatic method

- ISO 12985-1:2018

Carbonaceous materials used in the production of aluminium — Baked anodes and cathode blocks — Part 1: Determination of apparent density using a dimensions method

- ISO 17168-1:2018

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 1: Removal of nitric oxide

- ISO 6624-4:2016

Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel

- ISO 16900-2:2017

Respiratory protective devices — Methods of test and test equipment — Part 2: Determination of breathing resistance

- ISO 6624-2:2016

Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron

- ISO/TS 30438:2024

Human resource management — Employee engagement metrics

- ISO 22654:2002

Footwear — Test methods for outsoles — Tensile strength and elongation

- ISO 5894:2018

Ships and marine technology — Manholes with bolted covers

- ISO 19012-2:2013

Microscopes — Designation of microscope objectives — Part 2: Chromatic correction

- ISO 15637-1:2002

Holding fixtures of cylindrical abrasive sleeves — Part 1: Holding fixtures with shank for hand-held grinding machines

- ISO 14953:2024

Space systems — Structural design — Determination of loading levels for static qualification testing of launch vehicles

- ISO 9903-2:2003

Textile machinery and accessories — Main dimensions for section wires for metallic card clothing — Part 2: Foot with interchaining

- ISO 10628-2:2012

Diagrams for the chemical and petrochemical industry — Part 2: Graphical symbols

- ISO/TS 20490:2024

Measuring autofocus repeatability of sharpness and latency

- ISO 3164:2013/Amd 1:2024

Earth-moving machinery — Laboratory evaluations of protective structures — Specifications for deflection-limiting volume — Amendment 1

- ISO 21424:2018

Milk, milk products, infant formula and adult nutritionals — Determination of minerals and trace elements — Inductively coupled plasma mass spectrometry (ICP-MS) method

- ISO 15151:2018

Milk, milk products, infant formula and adult nutritionals — Determination of minerals and trace elements — Inductively coupled plasma atomic emission spectrometry (ICP-AES) method

- ISO 5365:2024

Dentistry — Designation system for tooth developmental stages

- ISO 45004:2024

Occupational health and safety management — Guidelines on performance evaluation

- ISO/TS 9250-1:2012

Earth-moving machinery — Multilingual listing of equivalent terms — Part 1: General

- ISO/TS 9250-2:2012

Earth-moving machinery — Multilingual listing of equivalent terms — Part 2: Performance and dimensions

- ISO 22326:2018

Security and resilience — Emergency management — Guidelines for monitoring facilities with identified hazards

- ISO 20688-2:2024

Biotechnology — Nucleic acid synthesis — Part 2: Requirements for the production and quality control of synthesized gene fragments, genes, and genomes

- ISO 19012-1:2013

Microscopes — Designation of microscope objectives — Part 1: Flatness of field/Plan

- ISO 6021:2024

Firebrand generator

- ISO 21485:2013

Textile machinery — Draw frame for cotton spinning — Vocabulary and principles of construction

- ISO 11669:2024

Translation projects — General guidance

- ISO 16358-1:2013

Air-cooled air conditioners and air-to-air heat pumps — Testing and calculating methods for seasonal performance factors — Part 1: Cooling seasonal performance factor

- ISO/IEC 25063:2014

Systems and software engineering — Systems and software product Quality Requirements and Evaluation (SQuaRE) — Common Industry Format (CIF) for usability: Context of use description

ICS:

35.080

- ISO 7383-1:2024

Fine bubble technology — Evaluation method for determining gas content in fine bubble dispersions in water — Part 1: Oxygen content

- ISO/IEC 23090-21:2024

Information technology — Coded representation of immersive media — Part 21: Reference software for Geometry-based Point Cloud Compression (G-PCC)

- ISO 8371:2024

Iron ores for blast furnace feedstocks — Determination of the decrepitation index

- ISO 13856-3:2013

Safety of machinery — Pressure-sensitive protective devices — Part 3: General principles for design and testing of pressure-sensitive bumpers, plates, wires and similar devices

- ISO 6273:2024

Assistive products — Accessibility guidelines and requirements to survey the needs of persons with sensory disabilities for assistive products and services

- ISO 19953:2004

Footwear — Test methods for heels — Resistance to lateral impact

- IEC 80601-2-78:2019/Amd 1:2024

Medical electrical equipment — Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation — Amendment 1

- ISO 4000-1:2024

Passenger car tyres and rims — Part 1: Tyres (metric series)

- ISO/TS 23148:2024

Compatibility of lubricants with synthetic male condoms

- ISO/TR 20659-2:2024

Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy)

- ISO 687:2024

Coke — Determination of moisture in the general analysis test sample

- ISO 21153:2018

Corrosion of metals and alloys — Measurement of environmentally assisted small crack growth rate

- ISO 19296:2018

Mining — Mobile machines working underground — Machine safety

- ISO 32312-11:2024

Aircraft ground support equipment — Specific requirements — Part 11: Container/Pallet dollies and loose load trailers

- ISO 13779-2:2018

Implants for surgery — Hydroxyapatite — Part 2: Thermally sprayed coatings of hydroxyapatite

- ISO 8968-3:2004

Milk — Determination of nitrogen content — Part 3: Block-digestion method (Semi-micro rapid routine method)

- ISO/TS 7344:2024

Short-range wireless sensor to device communication

- ISO 9284:2013

Abrasive grains — Test-sieving machines

- ISO/IEC/IEEE 24748-2:2024

Systems and software engineering — Life cycle management — Part 2: Guidelines for the application of ISO/IEC/IEEE 15288 (system life cycle processes)

- ISO 23550:2018

Safety and control devices for gas and/or oil burners and appliances — General requirements

- ISO 12315:2010

Aluminium oxide primarily used for production of aluminium — Method for calculating the Al2O3 content of smelter-grade alumina

- ISO 6351:1985

Nickel — Determination of silver, bismuth, cadmium, cobalt, copper, iron, manganese, lead and zinc contents — Flame atomic absorption spectrometric method

- ISO 9136-1:2004

Abrasive grains — Determination of bulk density — Part 1: Macrogrits

- ISO 4993:2024

Steel and iron castings — Radiographic testing

- ISO 7304-1:2016

Durum wheat semolina and alimentary pasta — Estimation of cooking quality of alimentary pasta by sensory analysis — Part 1: Reference method

- ISO 22320:2018

Security and resilience — Emergency management — Guidelines for incident management

- ISO 25424:2018

Sterilization of health care products — Low temperature steam and formaldehyde — Requirements for development, validation and routine control of a sterilization process for medical devices

ICS:

- ISO/IEC 5153-1:2024

Information technology — City service platform for public health emergencies — Part 1: Overview and general requirements

- ISO 21083-1:2018

Test method to measure the efficiency of air filtration media against spherical nanomaterials — Part 1: Size range from 20 nm to 500 nm

- ISO 15637-2:2002

Holding fixtures of cylindrical abrasive sleeves — Part 2: Holding fixtures for stationary machines

- ISO/TS 19303-1:2020

Graphic technology — Guidelines for schema writers — Part 1: Packaging printing

- ISO 9903-1:2003

Textile machinery and accessories — Main dimensions for section wires for metallic card clothing — Part 1: Foot without interlocking or interchaining

- ISO 18117:2009

Surface chemical analysis — Handling of specimens prior to analysis

- ISO 13100:2024

Methods for zeta potential determination — Streaming potential and streaming current methods for porous materials

- ISO 4628-10:2024

Paints and varnishes — Evaluation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 10: Assessment of degree of filiform corrosion

- ISO 13779-4:2018

Implants for surgery — Hydroxyapatite — Part 4: Determination of coating adhesion strength

- ISO 605:1991

Pulses — Determination of impurities, size, foreign odours, insects, and species and variety — Test methods

- ISO 13702:2024

Oil and gas industries — Control and mitigation of fires and explosions on offshore production installations — Requirements and guidelines

- ISO 603-18:2013

Bonded abrasive products — Dimensions — Part 18: Grinding wheels for flat glass edge grinding machines

- ISO/IEC 5392:2024

Information technology — Artificial intelligence — Reference architecture of knowledge engineering

- ISO 16311-4:2024

Maintenance and repair of concrete structures — Part 4: Execution of repairs

- ISO 14289-2:2024

Document management applications — Electronic document file format enhancement for accessibility — Part 2: Use of ISO 32000-2 (PDF/UA-2)

- ISO/TR 37112:2024

Sustainable cities and communities — Case studies in how smart city operating models support an effective public-health emergency response

- ISO 16249:2013

Springs — Symbols

- ISO 24163-1:2024

Clamp-in tyre valves for tyre pressure monitoring systems — Part 1: Definition, types, dimensions and valve interface

- ISO 6747:2013

Earth-moving machinery — Dozers — Terminology and commercial specifications

- ISO 12185:2024

Crude petroleum, petroleum products and related products — Determination of density — Laboratory density meter with an oscillating U-tube sensor

- ISO 17273:2024

Waste management and reduction from aquaculture facilities in natural water bodies — Principles and guidelines

- ISO/TS 15311-1:2020

Graphic technology — Requirements for printed matter for commercial and industrial production — Part 1: Measurement methods and reporting schema

- ISO 16900-3:2012

Respiratory protective devices — Methods of test and test equipment — Part 3: Determination of particle filter penetration

- ISO 7134:2013

Earth-moving machinery — Graders — Terminology and commercial specifications

- ISO 16900-4:2011

Respiratory protective devices — Methods of test and test equipment — Part 4: Determination of gas filter capacity and migration, desorption and carbon monoxide dynamic testing

- ISO 8071:2024

Traditional Chinese medicine — Ligusticum chuanxiong rhizome

- ISO 7133:2013

Earth-moving machinery — Scrapers — Terminology and commercial specifications

- ISO 16759:2013

Graphic technology — Quantification and communication for calculating the carbon footprint of print media products

- ISO 7519:2024

Technical product documentation (TPD) — Construction documentation — General principles of presentation for general arrangement and assembly drawings

- ISO 5735-1:2024

Railway infrastructure — Non-destructive testing on rails in track — Part 1: Requirements for ultrasonic testing and evaluation principles