Text Number

Standard Title

ISO 16119-4:2014

Agricultural and forestry machinery --Environmental requirements for sprayers -- Part 4: Fixed and semi-mobile sprayers.

ISO 9635-5:2014 - Revises: ISO 9635-5:2006

Agricultural irrigation equipment – Irrigation valves -- Part 5: Control valves.

ISO 15845:2014

Aircraft ground equipment – Boarding –vehicle for persons with reduced mobility - Functional and safety requirements.

ISO 19600:2014

Compliance management systems –Guidelines.

ISO 14739-1:2014

Document management -- 3D use of Product Representation Compact (PRC) format -- Part 1: PRC 10001.

ISO 14289-1:2014 - Revises: ISO 14289-1:2012

Document management applications --Electronic document file format enhancement for accessibility -- Part 1: Use of ISO 32000-1 (PDF/UA-1).

ISO 9735-10:2014 - Revises: ISO 9735-10:2002

Electronic data interchange for administration, commerce and transport (EDIFACT) -- Application level syntax rules (Syntax version number: 4, Syntax release number: 2) -- Part 10: Syntax service directories.

ISO 12651-2:2014 - Revises: ISO 12651:1999

Electronic document management --Vocabulary -- Part 2: Workflow management.

ISO 50004:2014

Energy management systems – Guidance for the implementation, maintenance and improvement of an energy management system.

ISO 50015:2014

Energy management systems – Measurement and verification of energy performance of organizations – General principles and guidance.

ISO 50006:2014

Energy management systems – Measuring energy performance using energy baselines (EnB) and energy performance indicators (EnPI) – General principles and guidance.

ISO/TS 14072:2014

Environmental management – Life cycle assessment -- Requirements and guidelines for organizational life cycle assessment.

ISO 7240-8:2014 - Revises: ISO 7240-8:2007

Fire detection and alarm systems --Part 8: Point-type fire detectors using a carbon monoxide sensor in combination with a heat sensor.

ISO 6182-12:2014 - Revises: ISO 6182-12:2010

Fire protection -- Automatic sprinkler systems -- Part 12: Requirements and test methods for grooved-end components for steel pipe systems.

ISO 17959:2014

General requirements for solid wood flooring.

ISO 2692:2014 - Revises: ISO 2692:2006

Geometrical product specifications (GPS) -- Geometrical tolerancing --Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR).

ISO 13427:2014 - Revises: ISO 13427:1998

Geosynthetics -- Abrasion damage simulation (sliding block test).

ISO 16684-2:2014

Graphic technology – Extensible   metadata platform (XMP) -- Part 2: Description of XMP schemas using RELAX NG.

ISO 15341:2014

Graphic technology -- Method for radius determination of printing cylinders.

ISO 16760:2014

Graphic technology -- Prepress data exchange -- Preparation and visualization of RGB images to be used in RGB-based graphics arts workflows.

ISO/TR 28380-3:2014

Health informatics -- IHE global standards adoption -- Part 3: Deployment.

ISO/TS 13131:2014

Health informatics -- Telehealth services -- Quality planning guidelines.

ISO 12164-3:2014 - Revises: ISO 12164-3:2008

Hollow taper interface with flange contact surface -- Part 3: Dimensions of shanks for stationary tools.

ISO 12164-4:2014 - Revises: ISO 12164-4:2008

Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for stationary tools.

ISO 4996:2014 - Revises: ISO 4996:2007

Hot-rolled steel sheet of high yield stress structural quality.

ISO/TS 17822-1:2014

In vitro diagnostic test systems --Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens -- Part 1: General requirements, terms and definitions.

ISO/TS 10303-1142:2014- Revises: ISO/TS 10303-1142:2014

Industrial automation systems and integration --- Product data representation -and exchange -- Part 1142: Application module: Requirement view definition relationship.

ISO/TS 10303-3001:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 3001: Business object model: Managed model based 3d engineering.

ISO/TS 10303-1803:2014 - Revises: ISO/TS 10303-1803:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1803: Application  module: Process plan.

ISO/TS 10303-1718:2014 - Revises: ISO/TS 10303-1718:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1718: Application module: Layered interconnect simple template.

ISO/TS 10303-1707:2014 - Revises: ISO/TS 10303-1707:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1707: Application module: Package.

ISO/TS 10303-1706:2014 - Revises: ISO/TS 10303-1706:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1706: Application module: Non feature shape element.

ISO/TS 10303-1698:2014 - Revises: ISO/TS 10303-1698:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1698: Application module: Layered interconnect module design.

ISO/TS 10303-1686:2014 - Revises: ISO/TS 10303-1686:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1686: Application module: Interconnect module usage view.

ISO/TS 10303-1650:2014 - Revises: ISO/TS 10303-1650:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1650: Application module: Bare die

ISO/TS 10303-1642:2014 - Revises: ISO/TS 10303-1642:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1642: Application module: Assembly module usage view.

ISO/TS 10303-1636:2014 - Revises: ISO/TS 10303-1636:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1636: Application module: Assembly module design.

ISO/TS 10303-1603:2014 - Revises: ISO/TS 10303-1603:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1603: Application module: Analytical model.

ISO/TS 10303-1127:2014 Revises: ISO/TS 10303-1127:2011

Industrial automation systems and integration -- Product data representation and exchange -- Part 1127: Application module: File identification

ISO/TS 10303-1051:2014 - Revises: ISO/TS 10303-1051:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1051: Application module: Geometric tolerance.

ISO 10303-522:2014 - Revises: ISO 10303-522:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 522: Application interpreted construct: Machining features.

ISO 10303-518:2014 - Revises: ISO 10303-518:2011

Industrial automation systems and integration -- Product data representation and exchange -- Part 518: Application interpreted construct: Mechanical design shaded presentation.

ISO/TS 10303-442:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 442: Application module: AP242 managed model based 3D engineering.

ISO/TS 10303-410:2014 - Revises: ISO/TS 10303-410:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 410: Application module: AP210 electronic assembly interconnect and packaging design.

ISO/TS 10303-409:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 409: Application module: AP209 multidisciplinary analysis and design.

ISO 10303-242:2014 - Revises: ISO 10303-201:1994; ISO 10303-202:1996; ISO 10303-203:2011; ISO 10303-204:2002; ISO 10303-214:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 242: Application protocol: Managed model-based 3D engineering.

ISO 10303-210:2014 - Revises: ISO 10303-210:2011

Industrial automation systems and integration -- Product data representation and exchange -- Part 210: Application protocol: Electronic assembly, interconnect and packaging design.

ISO 10303-209:2014 - Revises: ISO 10303-209:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 209: Application protocol: Multidisciplinary analysis and design.

ISO 10303-105:2014 - Revises: ISO 10303-105:1996; ISO 10303-105:1996/Cor 1:2000; ISO 10303-105:1996/Cor 2:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 105: Integrated application resource: Kinematics.

ISO 10303-101:2014 - Revises: ISO 10303-101:2011

Industrial automation systems and integration -- Product data representation and exchange -- Part 101: Integrated application resource: Draughting.

ISO 10303-59:2014 - Revises: ISO 10303-59:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 59: Integrated generic resource -- Quality of product shape data.

ISO 10303-45:2014 - Revises: ISO 10303-45:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 45: Integrated generic resource: Material and other engineering properties.

ISO 10303-44:2014 - Revises: ISO 10303-44:2000; ISO 10303-44:2000/Cor 1:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 44: Integrated generic resource: Product structure configuration.

ISO 10303-42:2014 - Revises: ISO 10303-42:2003

Industrial automation systems and integration -- Product data representation and exchange -- Part 42: Integrated generic resource: Geometric and topological representation.

ISO 10303-41:2014 - Revises: ISO 10303-41:2005; ISO 10303-41:2005/Cor 1:2008; ISO 10303-41:2005/Cor 2:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 41: Integrated generic resource: Fundamentals of product description and support.

ISO 22915-22:2014

Industrial trucks -- Verification of stability -- Part 22: Lateral- and frontstacking trucks with and without elevating operator position.

IWA 17:2014

Information and operations security and integrity requirements for lottery and gaming organizations.

ISO/IEC TR 29181-5:2014

Information technology -- Future Network -- Problem statement and requirements -- Part 5: Security.

ISO/IEC TR 29181-2:2014

Information technology -- Future Network -- Problem statement and requirements -- Part 2: Naming and addressing.

ISO/IEC 19763-10:2014

Information technology – Metamodel framework for interoperability (MFI) -- Part 10: Core model and basic mapping.

ISO/IEC 24775-5:2014 - Revises: ISO/IEC 24775:2011

Information technology – Storage management -- Part 5: File systems.

ISO/IEC 24775-6:2014 - Revises: ISO/IEC 24775:2011

Information technology – Storage management -- Part 6: Fabric.

ISO/IEC 24775-7:2014 - Revises: ISO/IEC 24775:2011

Information technology – Storage management -- Part 7: Host Elements.

ISO/IEC 24752-6:2014

Information technology -- User interfaces -- Universal remote console -- Part 6: Web service integration.

ISO/IEC 24752-5:2014 - Revises: ISO/IEC 24752-5:2008

Information technology -- User interfaces -- Universal remote console -- Part 5: Resource description.

ISO/IEC 24752-4:2014 - Revises: ISO/IEC 24752-4:2008

Information technology -- User interfaces -- Universal remote console --Part 4: Target description.

ISO/IEC 24752-2:2014 - Revises: ISO/IEC 24752-2:2008

Information technology -- User interfaces -- Universal remote console --Part 2: User interface socket description.

ISO/IEC 24752-1:2014 - Revises: ISO/IEC 24752-1:2008

Information technology -- User interfaces -- Universal remote console --Part 1: General framework.

- ISO 15096:2014  - Revises: ISO 15096:2008

Jewellery -- Determination of silver in 999 0/00 silver jewellery alloys – Difference method using ICP-OES.

ISO 24338:2014 - Revises: ISO 24338:2006

Laminate floor coverings -- Determination of abrasion resistance.

ISO 24617-7:2014

Language resource management – Semantic annotation framework -- Part 7: Spatial information (ISOspace).

ISO 8039:2014 - Revises: ISO 8039:2012

Microscopes -- Values, tolerances and symbols for magnification.

ISO 11608-1:2014 - Revises: ISO 11608-1:2012

Needle-based injection systems for medical use -- Requirements and test methods -- Part 1: Needle-based injection systems.

ISO 3524:2003 - Revises: ISO 3524:1977

Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume).

ISO 19901-3:2014 - Revises: ISO 19901-3:2010

Petroleum and natural gas industries --Specific requirements for offshore structures -- Part 3: Topsides structure.

ISO 12736:2014

Petroleum and natural gas industries --Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures.

ISO 26422:2014 - Revises: ISO 26422:2011

Petroleum and related products – Determination of shear stability of lubricating oils containing polymers --Method using a tapered roller bearing.

ISO 13061-7:2014 - Revises: ISO 3346:1975

Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 7: Determination of ultimate tensile stress perpendicular to grain.

ISO 13061-6:2014 - Revises: ISO 3345:1975

Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 6: Determination of ultimate tensile stress parallel to grain.

ISO 13061-4:2014 - Revises: ISO 3349:1975

Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 4: Determination of modulus of elasticity in static bending.

ISO 13061-3:2014 - Revises: ISO 3133:1975

Physical and mechanical properties of wood -- Test methods for small clear wood specimens -- Part 3: Determination of ultimate strength in static bending.

ISO 24631-5:2014

Radio frequency identification of animals -- Part 5: Procedure for testing the capability of RFID transceivers of reading ISO 11784 and ISO 11785 transponders.

ISO 17554:2014 - Revises: ISO 17554:2005

Reaction to fire tests -- Mass loss measurement.

ISO 7967-11:2014

Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 11: Fuel systems.

ISO 2005:2014 - Revises: ISO 2005:1992; ISO 2005:1992/Amd 1:2006

Rubber latex, natural, concentrate -- Determination of sludge content.

ISO/IEC Guide 50:2014 - Revises: ISO/IEC Guide 50:2002

Safety aspects -- Guidelines for child safety in standards and other specifications.

ISO 8124-1:2014 - Revises: ISO 8124-1:2012

Safety of toys -- Part 1: Safety aspects related to mechanical and physical properties.

ISO 11136:2014

Sensory analysis -- Methodology --General guidance for conducting hedonic tests with consumers in a controlled area.

ISO/PAS 19697:2014

Ships and marine technology – Navigation and ship operations – Electronic inclinometers.

ISO 13297:2014 - Revises: ISO 13297:2012

Small craft -- Electrical systems – Alternating current installations.

ISO 22315:2014

Societal security -- Mass evacuation --Guidelines for planning.

ISO/IEC 90003:2014 - Revises: ISO/IEC 90003:2004

Software engineering -- Guidelines for the application of ISO 9001:2008 to computer software.

ISO/TS 18806:2014

Solid mineral fuels -- Determination of Chlorine content.

ISO 10294-4:2001/Amd 1:2014

Specific performance requirement for thermal release mechanism based upon performance of thermal release mechanism used in ISO 10294-1 test specimen.

ISO 10791-6:2014 - Revises: ISO 10791-6:1998; ISO 10791-6:1998/Cor 1:2004

Test conditions for machining centres - - Part 6: Accuracy of speeds and interpolations.

ISO 5667-14:2014 - Revises: ISO 5667-14:1998

Water quality -- Sampling -- Part 14: - Guidance on quality assurance and quality control of environmental water sampling and handling

ISO 16840-10:2014

Wheelchairs -- Resistance to ignition of non-integrated seat and back support cushions -- Part 10: Requirements and test methods.