|
Text Number |
Standard Title |
|
Cutting tool data
representation and exchange -- Part 204: Creation and exchange of 3D models
-- Inserts for reaming |
|
|
Cutting tool data
representation and exchange -- Part 303: Creation and exchange of 3D
models -- Solid end mills |
|
|
Cutting tool data
representation and exchange -- Part 304: Creation and exchange of 3D models
-- Solid milling cutters with arbor hole |
|
|
Cutting tool data
representation and exchange -- Part 307: Creation and exchange of 3D models
-- End mills for indexable inserts |
|
|
Cutting tool data
representation and exchange -- Part 308: Creation and exchange of 3D models
-- Milling cutters with arbor hole for indexable inserts |
|
|
Cutting tool data
representation and exchange -- Part 312: Creation and exchange of 3D models
-- Reamers for indexable inserts |
|
|
Cutting tool data
representation and exchange -- Part 401: Creation and exchange of 3D models
-- Converting, extending and reducing adaptive items |
|
|
ISO/IEC 19762:2016
Replace: ISO/IEC 19762-1,2,3,4,5:2008 |
Information technology -- Automatic identification
and data capture (AIDC) techniques -- Harmonized vocabulary |
|
ISO/IEC 14651:2016
Replace: ISO/IEC 14651:2011 |
Information technology -- International string
ordering and comparison -- Method for comparing character strings and
description of the common template tailorable ordering |
|
ISO/IEC
23001-7:2016 Replace: ISO/IEC 23001-7:2015 |
Information technology -- MPEG systems technologies
-- Part 7: Common encryption in ISO base media file format files |
|
ISO/IEC 27000:2016
Replace: ISO/IEC 27000:2014 |
Information technology -- Security techniques --
Information security management systems -- Overview and vocabulary |
|
IEC 60839-5-2:2016
Replaces: IEC 60839-5-2:1991 |
Alarm and
electronic security systems - Part 5-2: Alarm transmission systems -
Requirements for supervised premises transceiver (SPT) |
|
IEC 60839-5-3:2016 |
Alarm and
electronic security systems - Part 5-3: Alarm transmission systems -
Requirements for receiving centre transceiver (RCT) |
|
IEC 62760:2016 |
Audio reproduction
method for normalized loudness level |
|
IEC TR
61850-90-2:2016 |
Communication
networks and systems for power utility automation - Part 90-2: Using IEC
61850 for communication between substations and control centres |
|
IEC 60051-1:2016
Replaces: IEC 60051-1:1997 |
Direct acting
indicating analogue electrical measuring instruments and their accessories -
Part 1: Definitions and general requirements common to all parts |
|
IEC 62595-1-2:2016
Replaces: IEC 62595-1-2:2011 |
Display lighting
unit - Part 1-2: Terminology and letter symbols |
|
IEC 62343-1:2016 |
Dynamic modules -
Part 1: Performance standards - General conditions |
|
IEC 62841-3-4:2016 |
Electric
motor-operated hand-held tools, transportable tools and lawn and garden
machinery - Safety - Part 3-4: Particular requirements for transportable
bench grinders |
|
IEC 62999:2016 |
Electric room
heating - Underfloor heating - Performance characteristics - Definitions,
method of testing, sizing and formula symbols |
|
IEC 62056-6-2:2016
Replaces: IEC 62056-6-2:2013 |
Electricity
metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface
classes |
|
IEC TR
61000-1-7:2016 |
Electromagnetic
compatibility (EMC) - Part 1-7: General - Power factor in single-phase
systems under non-sinusoidal conditions |
|
IEC TS
60695-11-11:2016 Replaces: IEC TS 60695-11-11:2008 |
Fire hazard testing
- Part 11-11: Test flames - Determination of the characteristic heat flux for
ignition from a non-contacting flame source |
|
IEC TS 62073:2016
Replaces: IEC TS 62073:2003 |
Guidance on the
measurement of hydrophobicity of insulator surfaces |
|
IEC 60050-614:2016 |
International
electrotechnical vocabulary - Part 614: Generation, transmission and
distribution of electricity - Operation |
|
IEC 62326-20:2016
Replaces: IEC PAS 62326-20:2011 |
Printed boards -
Part 20: Printed circuit boards for high-brightness LEDs |
|
IEC 62899-201:2016 |
Printed electronics
- Part 201: Materials - Substrates |
|
IEC 62899-202:2016 |
Printed electronics
- Part 202: Materials - Conductive ink |
|
IEC 60747-5-6:2016 |
Semiconductor
devices - Part 5-6: Optoelectronic devices - Light emitting diodes |
|
IEC 60747-5-7:2016 |
Semiconductor
devices - Part 5-7: Optoelectronic devices - Photodiodes and phototransistors |
|
IEC 62779-2:2016 |
Semiconductor
devices - Semiconductor interface for human body communication - Part 2:
Characterization of interfacing performances |
|
IEC 62779-1:2016 |
Semiconductor
devices - Semiconductor interface for human body communication - Part 1:
General requirements |
|
Non-cellulosic
papers for electrical purposes -- Part 2: Methods of test |
|
|
Non-cellulosic
papers for electrical purposes -- Part 3: Specifications for individual
materials -- Sheet 3: Aramid papers |
|
|
Non-destructive
testing -- Eddy current testing -- Part 2: Instrument characteristics and
verification |
|
|
Non-destructive
testing -- Eddy current testing -- Part 3: Probe characteristics and
verification |
|
|
Non-destructive
testing -- Eddy current testing -- Part 4: System characteristics and
verification |
|
|
Non-integrated
linear LED lamps with GX16t-5 cap for general lighting services -- Part 2:
Performance requirements |
|
|
BS EN
50090-5-3:2016 Replace: BS EN 50090-5-3:2006 |
|
|
BS EN
60317-31:2016 Replace: BS EN 60317-31:1997, IEC 60317-31:1990 |
|
|
BS EN
61804-4:2016 Replace: PD CLC/TR
61804-4:2007 |
|
|
IEC 62572-3:2016
Replaces: IEC 62572-3:2014 |
Fibre optic active
components and devices - Reliability standards - Part 3: Laser modules used
for telecommunication |
|
IEC TR
61282-12:2016 |
Fibre optic
communication system design guides - Part 12: In-band optical signal-to-noise
ratio (OSNR) |
|
IEC 61757-1-1:2016 |
Fibre optic sensors
- Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings |
|
ISO 14296:2016 |
Intelligent
transport systems -- Extension of map database specifications for
applications of cooperative ITS |
|
ISO 3917:2016
Replace: ISO 3917:1999 |
Road vehicles -- Safety glazing materials -- Test
methods for resistance to radiation, high temperature, humidity, fire and
simulated weathering |
|
IEC 62196-2:2016
Replaces: IEC 62196-2:2011 |
Plugs,
socket-outlets, vehicle connectors and vehicle inlets - Conductive charging
of electric vehicles - Part 2: Dimensional compatibility and
interchangeability requirements for a.c. pin and contact-tube accessories |
|
IEC 62505-2:2016
Replaces: IEC 62505-2:2009 |
Railway
applications - Fixed installations - Particular requirements for AC
switchgear - Part 2: Disconnectors, earthing switches and switches with
nominal voltage above 1 kV |
|
IEC 62505-1:2016
Replaces: IEC 62505-1:2009 |
Railway
applications - Fixed installations - Particular requirements for AC
switchgear - Part 1: Circuit-breakers with nominal voltage above 1 kV |
|
IEC 62847:2016 |
Railway
applications - Rolling stock - Electrical connectors - Requirements and test
methods |
|
ASTM E1551 - 16
Revises: ASTM E1551–08 (Reapproved 2015) |
Standard
Specification for a Size 4.00-8 Smooth Tread Friction Test Tire |
|
Automotive parts --
Test methods and general requirements for alternators with regulators |
|
|
ISO 9154:2016
Replace: ISO 9154:1999 |
Aerospace -- Bolts, with MJ threads, made of
heat-resistant nickel-based alloy, strength class 1 550 MPa -- Procurement
specification |
|
ISO 3209:2016
Replace: ISO 3209:1998 |
Aerospace -- Nuts, anchor, self-locking, floating,
two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at
ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315
degrees C and 1 100 MPa (at ambient temperature)/425 degrees C -- Dimensions |
|
ISO 9609:2016
Replace: ISO 9609:1996 |
Aerospace -- Nuts, hexagonal, plain, reduced
height, normal across flats, with MJ threads, classifications: 450 MPa (at
ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235
degrees C, 600 MPa (at ambient temperature) /425 degrees C, 900 MPa (at
ambient temperature) /235 degrees C, 900 MPa (at ambient temperature) /315
degrees C, 900 MPa (at ambient temperature) /650 degrees C, 1 100 MPa (at
ambient temperature) /235 degrees C, 1 100 MPa (at ambient temperature) /730
degrees C and 1 250 MPa (at ambient temperature)/600 degrees C -- Dimensions |
|
ISO 9618:2016
Replace: ISO 9618:1996 |
Aerospace -- Nuts, hexagonal, slotted
(castellated), reduced height, normal across flats, with MJ threads,
classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at
ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
degrees C, 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at
ambient temperature)/315 degrees C, 900 MPa (at ambient temperature)/650
degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at
ambient temperature)/730 degrees C and 1 250 MPa (at ambient temperature)/600
degrees C -- Dimensions |
|
ISO 12289:2016
Replace: ISO 12289:2003 |
Aerospace -- Rivets, solid, in corrosion-resisting
steel -- Procurement specification |
|
ISO 12261:2016
Replace: ISO 12261:1996 |
Aerospace -- Screws, pan head, internal offset
cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ
threads, metallic material, coated or uncoated, strength classes less than or
equal to 1 100 MPa -- Dimensions |
|
ISO 12260:2016
Replace: ISO 12260:1996 |
Aerospace -- Screws, pan head, internal offset
cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ
threads, metallic material, coated or uncoated, strength classes less than or
equal to 1 100 MPa -- Dimensions |
|
ASTM F3173/F3173M -
15 |
Standard
Specification for Handling Characteristics of Aeroplanes |
|
ISO 15171-2:2016
Replace: ISO 15171-2:2000 |
Connections for fluid power and general use --
Hydraulic couplings for diagnostic purposes -- Part 2: Coupling with M16 x 2
end for connection under pressure |
|
ISO 6624-2:2016
Replace: ISO 6624-2:2003 |
Internal combustion engines -- Piston rings -- Part
2: Half keystone rings made of cast iron |
|
ISO 6624-4:2016
Replace: ISO 6624-4:2003 |
Internal combustion engines -- Piston rings -- Part
4: Half keystone rings made of steel |
|
ISO 4548-14:2016 |
Methods of test for
full-flow lubricating oil filters for internal combustion engines -- Part 14:
Cold start simulation and hydraulic pulse durability for composite filter
housings |
|
ISO 669:2016
Replace: ISO 669:2000 |
Resistance welding -- Resistance welding equipment
-- Mechanical and electrical requirements |
|
ISO/TS 15066:2016 |
|
|
ISO
9454-1:2016 Replace: ISO 9454-1:1990 |
Soft
soldering fluxes -- Classification and requirements -- Part 1:
Classification, labelling and packaging |
|
ISO 18388:2016 |
Technical product
documentation (TPD) -- Relief grooves -- Types and dimensioning |
|
ISO 230-10:2016
Replace: ISO 230-10:2011; ISO 230-10:2011/Amd 1:2014 |
Test code for machine tools -- Part 10:
Determination of the measuring performance of probing systems of numerically
controlled machine tools |
|
ISO 16916:2016
Replace: ISO 16916:2004 |
Tools for moulding -- Tool specification sheet for
injection moulds |
|
Cup head square
neck bolts (Amendment 1) |
|
|
Dimensions of
cylindrical worm gears |
|
|
Flat head bolts
(Amendment 1) |
|
|
Foundation bolts
(Amendment 1) |
|
|
Hexagon bolts with
flange (Amendment 1) |
|
|
Hexagon socket head
cap screws (Amendment 1) |
|
|
JIS B
1182:2009/AMENDMENT 1:2015 |
Square head bolts
(Amendment 1) |
|
Studs (Amendment 1) |
|
|
T-slot bolts
(Amendment 1) |
|
|
Weld bolts
(Amendment 1) |
|
|
BS EN
62841-3-9:2015 Replace: BS EN 61029-2-9:2012+A11:2013 |
|
|
ISO 8566-2:2016
Replace: ISO 8566-2:1995 |
Cranes -- Cabins and control stations -- Part 2:
Mobile cranes |
|
ISO 9926-3:2016
Replace: ISO 9926-3:2005 |
|
|
Cranes -- Access,
guards and restraints -- Part 1: General |
|
|
BS ISO
8566-2:2016. Cranes. Cabins and control stations. Mobile cranes |
|
|
ISO 11001-1:2016
Replace: ISO 11001-1:1993 |
Agricultural wheeled tractors -- Three-point hitch
couplers -- Part 1: U-frame coupler |
|
ISO 10378:2016
Replace: ISO 10378:2005 |
Copper, lead and zinc sulfide concentrates --
Determination of gold and silver -- Fire assay gravimetric and flame atomic
absorption spectrometric method |
|
ISO 4499-3:2016 |
Hardmetals --
Metallographic determination of microstructure -- Part 3: Measurement of
microstructural features in Ti (C, N) and WC/cubic carbide based hardmetals |
|
ISO 4499-4:2016
Replace: ISO 4505:1978 |
Hardmetals -- Metallographic determination of
microstructure -- Part 4: Characterisation of porosity, carbon defects and
eta-phase content |
|
ISO 18555:2016 |
Metallic and other
inorganic coatings -- Determination of thermal conductivity of thermal
barrier coatings |
|
ISO 4946:2016
Replace: : ISO 4946:1984 |
Steel and cast iron -- Determination of copper --
2,2'-Biquinoline spectrophotometric method |
|
ISO 4938:2016
Replace: ISO 4938:1988 |
Steel and iron -- Determination of nickel content
-- Gravimetric or titrimetric method |
|
ISO 4829-2:2016
Replace: ISO 4829-2:1988 |
Steels -- Determination of total silicon contents
-- Reduced molybdosilicate spectrophotometric method -- Part 2: Silicon
contents between 0,01 % and 0,05 % |
|
ISO 1288-2:2016 |
Glass in building
-- Determination of the bending strength of glass -- Part 2: Coaxial double-ring
test on flat specimens with large test surface areas |
|
ISO 1288-1:2016 |
Glass in building
-- Determination of the bending strength of glass -- Part 1: Fundamentals of
testing glass |
|
ISO 1288-3:2016 |
Glass in building
-- Determination of the bending strength of glass -- Part 3: Test with
specimen supported at two points (four point bending) |
|
ISO 1288-4:2016 |
Glass in building
-- Determination of the bending strength of glass -- Part 4: Testing of
channel shaped glass |
|
ISO 1288-5:2016 |
Glass in building
-- Determination of the bending strength of glass -- Part 5: Coaxial double
ring test on flat specimens with small test surface areas |
|
ISO 8639:2016
Replace: ISO 8639:2000 |
Glass-reinforced thermosetting plastics (GRP) pipes
and fittings -- Test methods for leaktightness and proof of structural design
of flexible joints |
|
ISO 9705-1:2016
Replace: ISO 9705:1993; ISO 9705:1993/Cor 1:1993 |
Reaction to fire tests -- Room corner test for wall
and ceiling lining products -- Part 1: Test method for a small room
configuration |
|
Determination of
the emission of volatile organic compounds and aldehydes by building products
-- Sampling, preparation of test specimens and testing condition -- Part 1:
Boards, wallpaper and floor materials |
|
|
Determination of
the emission of volatile organic compounds and aldehydes by building products
-- Sampling, preparation of test specimens and testing condition -- Part 2:
Adhesives |
|
|
Determination of
the emission of volatile organic compounds and aldehydes by building products
-- Sampling, preparation of test specimens and testing condition -- Part 3:
Paints and coating materials |
|
|
Determination of
the emission of volatile organic compounds and aldehydes by building products
-- Sampling, preparation of test specimens and testing condition -- Part 4:
Heat-Insulating material boards |
|
|
Determination of
the emission of volatile organic compounds and aldehydes without formaldehyde
by building materials and building related products -- Large chamber method |
|
|
Decorated cement
shingles for dwelling roofs |
|
|
Determination of
the emission of formaldehyde by building materials and building related
products -- Large chamber method |
|
|
Determination of
water vapour adsorption/desorption properties for building materials -- Part
1: Response to humidity variation |
|
|
Performance test of
sorptive building materials of reducing indoor air pollution with small
chamber -- Part 1: Measurement of adsorption flux with supplying constant
concentration of formaldehyde |
|
|
Performance test of
sorptive building materials reducing indoor air pollution with small chamber
-- Part 2: Measurement of capability for suppressing formaldehyde emission |
|
|
ISO 4892-3:2016
Replace: ISO 4892-3:2013 |
Plastics -- Methods of exposure to laboratory light
sources -- Part 3: Fluorescent UV lamps |
|
ISO/TR 18486:2016 |
Plastics --
Parameters comparing the spectral irradiance of a laboratory light source for
weathering applications to a reference solar spectral irradiance |
|
ISO 17855-2:2016
Replace: ISO 1872-2:2007 |
Plastics -- Polyethylene (PE) moulding and
extrusion materials -- Part 2: Preparation of test specimens and
determination of properties |
|
ISO 19069-2:2016
Replace: ISO 1873-2:2007 |
Plastics -- Polypropylene (PP) moulding and
extrusion materials -- Part 2: Preparation of test specimens and
determination of properties |
|
ISO 18898:2016
Replace: ISO 18898:2012 |
|
|
ISO 289-2:2016
Replace: ISO 289-2:1994 |
Rubber, unvulcanized -- Determinations using a
shearing-disc viscometer -- Part 2: Determination of pre-vulcanization
characteristics |
|
ISO 23233:2016 Replace:
ISO 23233:2009 |
Rubber, vulcanized or thermoplastic --
Determination of resistance to abrasion using a driven, vertical abrasive
disc |
|
ASTM D5964 - 16
Revises: ASTM D5964–15a |
Standard Practice
for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1,
ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil |
|
ASTM D471 - 16
Revises: ASTM D471–15a |
Standard Test
Method for Rubber Property—Effect of Liquids |
|
BS ISO
6502:2016 Replace: BS 903-A60.1:2000, BS ISO 6502:1999 |
|
|
ISO 12156-1:2016 Replace:
ISO 12156-1:2006 |
Diesel fuel -- Assessment of lubricity using the
high-frequency reciprocating rig (HFRR) -- Part 1: Test method |
|
ISO 11119-4:2016 |
Gas cylinders --
Refillable composite gas cylinders -- Design, construction and testing --
Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l
with load-sharing welded metallic liners |
|
ISO 16904:2016 |
Petroleum and
natural gas industries -- Design and testing of LNG marine transfer arms for
conventional onshore terminals |
|
ISO 21809-3:2016
Replace: ISO 21809-3:2008; ISO 21809-3:2008/Amd 1:2011 |
Petroleum and natural gas industries -- External
coatings for buried or submerged pipelines used in pipeline transportation
systems -- Part 3: Field joint coatings |
|
ISO 17348:2016 |
Petroleum and
natural gas industries -- Materials selection for high content CO2 for
casing, tubing and downhole equipment |
|
ISO 17349:2016 |
Petroleum and
natural gas industries -- Offshore platforms handling streams with high
content of CO2 at high pressures |
|
ISO 19901-5:2016
Replace: ISO 19901-5:2003 |
Petroleum and natural gas industries -- Specific
requirements for offshore structures -- Part 5: Weight control during
engineering and construction |
|
Safety and control
devices for gas burners and gas-burning appliances -- Particular requirements
-- Part 8: Multifunctional controls |
|
|
ASTM D8011 - 16 |
Standard
Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or
as a Denaturant for Fuel Ethanol |
|
ASTM D2896 - 15
Revises: ASTM D2896– 11 |
Standard Test
Method for Base Number of Petroleum Products by Potentiometric Perchloric
Acid Titration |
|
ASTM D7548 - 15
Revises: ASTM D7548–09 |
Standard Test
Method for Determination of Accelerated Iron Corrosion in Petroleum Products |
|
ASTM D4212 - 16
Revises: ASTM D4212–10 (Reapproved 2014) |
Standard Test
Method for Viscosity by Dip-Type Viscosity Cups |
|
ISO 17236:2016
(IULTCS/IUP 43) Replace: ISO 17236:2002 (IULTCS/IUP 43) |
Leather -- Physical and mechanical tests -- Determination
of extension set |
|
ISO 3377-2:2016
(IULTCS/IUP 8) Replace: ISO 3377-2:2002 (IULTCS/IUP 8) |
Leather -- Physical and mechanical tests --
Determination of tear load -- Part 2: Double edge tear |
|
ISO 2417:2016
(IULTCS/IUP 7) Replace: ISO 2417:2002 (IULTCS/IUP 7) |
Leather -- Physical and mechanical tests --
Determination of the static absorption of water |
|
ISO 2589:2016
(IULTCS/IUP 4) Replace: ISO 3377-2:2002 (IULTCS/IUP 8) |
Leather -- Physical and mechanical tests --
Determination of thickness |
|
ISO 17229:2016
(IULTCS/IUP 42) Replace: ISO 17229:2002 (IULTCS/IUP 42) |
Leather -- Physical and mechanical tests --
Determination of water vapour absorption |
|
ASTM D4970/D4970M -
16 Revises: ASTM D4970/D4970M–10ε1 |
Standard Test
Method for Pilling Resistance and Other Related Surface Changes of Textile
Fabrics: Martindale Tester |
|
Textiles --
Determination of antibacterial activity and efficacy of textile products |
|
|
Textiles --
Determination of antifungal activity and efficacy of textile products |
|
|
PD CEN/TS
15398:2016 Replace: DD CEN/TS
15398:2008 |
|
|
ISO 8903:2016
Replace: ISO 8903:1994 |
|
|
ASTM D6763 - 16
Revises: ASTM D6763–08 (Reapproved 2014) |
Standard Guide for
Testing Exterior Wood Stains and Clear Water Repellents |
|
ASTM E69 - 15
Revises: ASTM E69–02 (Reapproved 2007) |
Standard Test
Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus |
|
ASTM D5652 - 15
Revises: ASTM D5652–95 (Reapproved 2013) |
Standard Test
Methods for Single-Bolt Connections in Wood and Wood-Based Products |
|
ISO 2811-1:2016
Replace: ISO 2811-1:2011 |
Paints and varnishes -- Determination of density --
Part 1: Pycnometer method |
|
BS EN ISO
4628-7:2016 Replace :BS EN
ISO 4628-7:2003, BS 3900-H7:2003 |
|
|
ISO 28721-5:2016 |
Vitreous and
porcelain enamels -- Glass-lined apparatus for process plants -- Part 5:
Presentation and characterization of defects |
|
ISO 11177:2016 |
Vitreous and
porcelain enamels -- Inside and outside enamelled valves and pressure pipe
fittings for untreated and potable water supply -- Quality requirements and
testing |
|
ASTM C1323 - 16
Revises: ASTM C1323–10 |
Standard Test
Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed
C-Ring Specimens at Ambient Temperature |
|
Fine ceramics
(advanced ceramics, advanced technical ceramics) -- Test method for
self-cleaning performance of photocatalytic materials -- Part 2:
Decomposition of wet methylene blue |
|
|
Glass-fiber reinforced
thermosetting resin chemical-resistant tanks |
|
|
ISO 6885:2016
Replace: ISO 6885:2006 |
Animal and vegetable fats and oils -- Determination
of anisidine value |
|
ISO 6886:2016
Replace: ISO 6886:2006 |
Animal and vegetable fats and oils -- Determination
of oxidative stability (accelerated oxidation test) |
|
ISO 13904:2016
Replace: ISO 13904:2005 |
Animal feeding stuffs -- Determination of
tryptophan content |
|
ISO 5360:2016
Replace: ISO 5360:2012 |
|
|
ISO 9693-2:2016
Replace: ISO 9693:1999; ISO 9693:1999/Amd 1:2005 |
Dentistry -- Compatibility testing -- Part 2: Ceramic-ceramic
systems |
|
ISO 8362-5:2016
Replace: ISO 8362-5:2008 |
Injection containers and accessories -- Part 5:
Freeze drying closures for injection vials |
|
ISO 14835-1:2016
Replace: ISO 14835-1:2005 |
Mechanical vibration and shock -- Cold provocation
tests for the assessment of peripheral vascular function -- Part 1:
Measurement and evaluation of finger skin temperature |
|
ISO 7396-1:2016
Replace: ISO 10083:2006; ISO 7396-1:2007; ISO 7396-1:2007/Amd 1:2010; ISO
7396-1:2007/Amd 2:2010 |
Medical gas pipeline systems -- Part 1: Pipeline
systems for compressed medical gases and vacuum |
|
ISO 11197:2016
Replace: ISO 11197:2004 |
|
|
ISO 14408:2016
Replace: ISO 14408:2005 |
Tracheal tubes designed for laser surgery --
Requirements for marking and accompanying information |
|
Washer-disinfectors
-- Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection
for non-invasive, non-critical thermolabile medical devices and healthcare
equipment |
|
|
ASTM E170 - 16
Revises: ASTM E170–15a |
Standard
Terminology Relating to Radiation Measurements and Dosimetry |
|
|
|
|
ISO 17586:2016 |
Soil quality --
Extraction of trace elements using dilute nitric acid |
|
ISO 15009:2016
Replace: ISO 15009:2012 |
Soil quality -- Gas chromatographic determination
of the content of volatile aromatic hydrocarbons, naphthalene and volatile
halogenated hydrocarbons -- Purge-and-trap method with thermal desorption |
|
ISO 22155:2016
Replace: ISO 22155:2011 |
Soil quality -- Gas chromatographic determination
of volatile aromatic and halogenated hydrocarbons and selected ethers --
Static headspace method |
|
ISO 19827:2016 |
Water quality --
Determination of the acute toxicity to the freshwater rotifer Brachionus
calyciflorus |
|
ISO
16283-3:2016 Replace: ISO 140-5:1998 |
Acoustics
-- Field measurement of sound insulation in buildings and of building
elements -- Part 3: Façade sound insulation |
|
ISO/TR 8124-8:2016
Replace: ISO/TR 8124-8:2014 |
|
|
BS EN ISO
19353:2016 Replace:BS EN 13478:2001+A1:2008 |
BS EN ISO
19353:2016. Safety of machinery. Fire prevention and fire protection |
|
ISO 11665-9:2016 |
Measurement of
radioactivity in the environment -- Air: Radon-222 -- Part 9: Test methods
for exhalation rate of building materials |
|
ISO 16637:2016 |
Radiological
protection -- Monitoring and internal dosimetry for staff members exposed to
medical radionuclides as unsealed sources |
|
IEC 61017:2016 |
Radiation
protection instrumentation - Transportable, mobile or installed equipment to
measure photon radiation for environmental monitoring |
|
IEC/IEEE
60780-323:2016 |
Nuclear facilities
- Electrical equipment important to safety - Qualification |
|
IEC 60965:2016
Replaces: IEC 60965:2009 |
Nuclear power
plants - Control rooms - Supplementary control room for reactor shutdown
without access to the main control room |
|
ASTM C708 - 16
Revises: ASTM C708–08 |
Standard
Specification for Nuclear-Grade Beryllium Oxide Powder |
|
ISO/TR 21414:2016 |
Hydrometry --
Groundwater -- Surface geophysical surveys for hydrogeological purposes |
|
Glass thermometers
for general -- Part 1: General measuring instruments |
|
|
Glass thermometers
for general -- Part 2: Measuring instruments used in transaction or certification |
|
|
ISO 7870-6:2016 |
|
|
ISO/TR 18336:2016 |
Guidelines for good
XRF laboratory practice for the iron ore industry |
|
ISO 16128-1:2016 |
Guidelines on
technical definitions and criteria for natural and organic cosmetic
ingredients and products -- Part 1: Definitions for ingredients |
|
ISO
10303-21:2016 Replace: ISO 10303-21:2002 |
Industrial
automation systems and integration -- Product data representation and
exchange -- Part 21: Implementation methods: Clear text encoding of the
exchange structure |
Previous page
Back to top
