ISO 5659-2:2017

Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test

ISO 16120-1:2017

Non-alloy steel wire rod for conversion to wire -- Part 1: General requirements

ISO 13276:2017

Tobacco and tobacco products -- Determination of nicotine purity -- Gravimetric method using tungstosilicic acid

ISO 80601-2-74:2017

Medical electrical equipment -- Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment

ISO 16120-4:2017

Non-alloy steel wire rod for conversion to wire -- Part 4: Specific requirements for wire rod for special applications

ISO 20700:2017

Guidelines for management consultancy services

ISO 16745-1:2017

Sustainability in buildings and civil engineering works -- Carbon metric of an existing building during use stage -- Part 1: Calculation, reporting and communication

ISO 24598:2012

Welding consumables -- Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels -- Classification

ISO/IEC 19794-15:2017

Information technology -- Biometric data interchange format -- Part 15: Palm crease image data

ISO 18170:2017

Aerospace series -- AC induction electric motor driven, variable delivery, hydraulic pumps -- General requirements

ISO 4254-12:2012/Amd 1:2017

ISO 1797:2017

Dentistry -- Shanks for rotary and oscillating instruments

ISO 16787:2016

Intelligent transport systems -- Assisted Parking System (APS) -- Performance requirements and test procedures

ISO 15006:2011

Road vehicles -- Ergonomic aspects of transport information and control systems -- Specifications for in-vehicle auditory presentation

ISO 10191:2010

Passenger car tyres -- Verifying tyre capabilities -- Laboratory test methods

ISO/IEC/IEEE 21450:2010

Information technology -- Smart transducer interface for sensors and actuators -- Common functions, communication protocols, and Transducer Electronic Data Sheet (TEDS) formats

ISO 3959:1977

Green bananas -- Ripening conditions

ISO/IEC 15423:2009

Information technology -- Automatic identification and data capture techniques -- Bar code scanner and decoder performance testing

ISO 1438:2017

Hydrometry -- Open channel flow measurement using thin-plate weirs

ISO 8636-2:2007

Machine tools -- Test conditions for bridge-type milling machines -- Testing of the accuracy -- Part 2: Travelling bridge (gantry-type) machines

ISO 19490:2017

Dentistry -- Sinus membrane elevator

ISO 21927-8:2017

Smoke and heat control systems -- Part 8: Smoke control dampers

ISO 26622-1:2017

Modular taper interface with ball track system -- Part 1: Dimensions and designation of shanks

ISO 10426-6:2008

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 6: Methods for determining the static gel strength of cement formulations

ISO 19715:2017

Dentistry -- Filling instrument with contra angle

ISO 3233-2:2014

Paints and varnishes -- Determination of the percentage volume of non-volatile matter -- Part 2: Method using the determination of non-volatile-matter content in accordance with ISO 3251 and determination of dry film density on coated test panels by the Archimedes principle

ISO 6481:1981

Acceptance conditions for vertical surface type broaching machines -- Testing of accuracy

ISO/IEC/IEEE 21451-4:2010

Information technology -- Smart transducer interface for sensors and actuators -- Part 4: Mixed-mode communication protocols and Transducer Electronic Data Sheet (TEDS) formats

ISO/IEC 21000-21:2017

Information technology -- Multimedia framework (MPEG-21) -- Part 21: Media contract ontology

ISO 11609:2017

Dentistry -- Dentifrices -- Requirements, test methods and marking

ISO 16745-2:2017

Sustainability in buildings and civil engineering works -- Carbon metric of an existing building during use stage -- Part 2: Verification

ISO 6480:1983

Conditions of acceptance for horizontal internal broaching machines -- Testing of the accuracy

ISO 20267:2017

Thermal spraying -- Determination of interfacial toughness of ceramic coatings by indentation

ISO 13357-1:2017

Petroleum products -- Determination of the filterability of lubricating oils -- Part 1: Procedure for oils in the presence of water

ISO 13357-2:2017

Petroleum products -- Determination of the filterability of lubricating oils -- Part 2: Procedure for dry oils

ISO 841:2001

Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature

ISO 20711:2017

Optics and photonics -- Environmental requirements -- Test requirements for telescopic systems

ISO 25178-72:2017

Geometrical product specifications (GPS) -- Surface texture: Areal -- Part 72: XML file format x3p

ISO/IEC 18000-2:2009

Information technology -- Radio frequency identification for item management -- Part 2: Parameters for air interface communications below 135 kHz

ISO 26382:2010

Cogeneration systems -- Technical declarations for planning, evaluation and procurement

ISO 21927-7:2017

Smoke and heat control systems -- Part 7: Smoke ducts sections

ISO 3098-3:2000

Technical product documentation -- Lettering -- Part 3: Greek alphabet

ISO/IEC 15693-3:2009/Amd 4:2017

Security framework

ISO 3098-2:2000

Technical product documentation -- Lettering -- Part 2: Latin alphabet, numerals and marks

ISO 3251:2008

Paints, varnishes and plastics -- Determination of non-volatile-matter content

ISO 13885-1:2008

Binders for paints and varnishes -- Gel permeation chromatography (GPC) -- Part 1: Tetrahydrofuran (THF) as eluent

ISO 15765-1:2011

Road vehicles -- Diagnostic communication over Controller Area Network (DoCAN) -- Part 1: General information and use case definition

ISO 5940:1981

Carbonaceous materials for the production of aluminium -- Pitch for electrodes -- Determination of softening point by the ring-and-ball method

ISO 7788:1985

Steel -- Surface finish of hot-rolled plates and wide flats -- Delivery requirements

ISO/IEC 29150:2011

Information technology -- Security techniques -- Signcryption

ISO/IEC 24723:2010

Information technology -- Automatic identification and data capture techniques -- GS1 Composite bar code symbology specification

ISO 19225:2017

Underground mining machines -- Mobile extracting machines at the face -- Safety requirements for shearer loaders and plough systems

ISO/IEC 24724:2011

Information technology -- Automatic identification and data capture techniques -- GS1 DataBar bar code symbology specification

ISO 2030:1990

Granulated cork -- Size analysis by mechanical sieving

ISO 20568-2:2017

Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

ISO 20568-1:2017

Plastics -- Fluoropolymer dispersions and moulding and extrusion materials -- Part 1: Designation system and basis for specifications

ISO/IEC 29143:2011

Information technology -- Automatic identification and data capture techniques -- Air interface specification for Mobile RFID interrogators

ISO/IEC 24791-1:2010

Information technology -- Radio frequency identification (RFID) for item management -- Software system infrastructure -- Part 1: Architecture

ISO 11503:1995

Paints and varnishes -- Determination of resistance to humidity (intermittent condensation)

ISO 9241-333:2017

Ergonomics of human-system interaction -- Part 333: Stereoscopic displays using glasses

ISO 17724:2003

Graphical symbols -- Vocabulary

ISO/IEC 14651:2016

Information technology -- International string ordering and comparison -- Method for comparing character strings and description of the common template tailorable ordering

ISO 5006:2017

Earth-moving machinery -- Operator's field of view -- Test method and performance criteria

ISO 15739:2017

Photography -- Electronic still-picture imaging -- Noise measurements

ISO 19467:2017

Thermal performance of windows and doors -- Determination of solar heat gain coefficient using solar simulator

ISO 17287:2003

Road vehicles -- Ergonomic aspects of transport information and control systems -- Procedure for assessing suitability for use while driving

ISO/IEC 18031:2011

Information technology -- Security techniques -- Random bit generation

ISO 19499:2007

Mechanical vibration -- Balancing -- Guidance on the use and application of balancing standards

ISO 14813-5:2010

Intelligent transport systems -- Reference model architecture(s) for the ITS sector -- Part 5: Requirements for architecture description in ITS standards

ISO 355:2007

Rolling bearings -- Tapered roller bearings -- Boundary dimensions and series designations

ISO 11843-5:2008/Amd 1:2017

ISO 91:2017

Petroleum and related products -- Temperature and pressure volume correction factors (petroleum measurement tables) and standard reference conditions

ISO/IEC 13818-1:2015/Amd 3:2016/Cor 1:2017

ISO 8502-11:2006

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 11: Field method for the turbidimetric determination of water-soluble sulfate

ISO 7001:2007/Amd 4:2017

ISO 6624-1:2017

Internal combustion engines -- Piston rings -- Part 1: Keystone rings made of cast iron

ISO 534:2011

Paper and board -- Determination of thickness, density and specific volume

ISO 6624-3:2017

Internal combustion engines -- Piston rings -- Part 3: Keystone rings made of steel

ISO 17115:2007

Health informatics -- Vocabulary of compositional terminological systems

ISO 15234:1999

Paints and varnishes -- Testing of formaldehyde-emitting coatings and melamine foams -- Determination of the steady-state concentration of formaldehyde in a small test chamber

ISO/IEC 29128:2011

Information technology -- Security techniques -- Verification of cryptographic protocols

ISO 19233-1:2017

Implants for surgery -- Orthopaedic joint prosthesis -- Part 1: Procedure for producing parametric 3D bone models from CT data of the knee

ISO 19846:2017

Reclaimed rubber -- Coding and classification system

ISO/ASTM 51900:2009

Guide for dosimetry in radiation research on food and agricultural products

ISO 5261:1995

Technical drawings -- Simplified representation of bars and profile sections

ISO 21929-1:2011

Sustainability in building construction -- Sustainability indicators -- Part 1: Framework for the development of indicators and a core set of indicators for buildings

ISO 18844:2017

Photography -- Digital cameras -- Image flare measurement

ISO 17949:2013/Amd 1:2017

ISO 15734:2001

Ships and marine technology -- Hydrostatic release units

ISO 29845:2011

Technical product documentation -- Document types

ISO 9416:2017

Paper -- Determination of light scattering and absorption coefficients (using Kubelka-Munk theory)

ISO 11480:2017

Pulp, paper and board -- Determination of total chlorine and organically bound chlorine

ISO 2493-2:2011

Paper and board -- Determination of bending resistance -- Part 2: Taber-type tester

ISO 23309:2007

Hydraulic fluid power systems -- Assembled systems -- Methods of cleaning lines by flushing

ISO 10939:2017

Ophthalmic instruments -- Slit-lamp microscopes

ISO/IEC 13818-1:2015/Cor 2:2017

ISO 20409:2017

Traditional Chinese medicine -- Panax notoginseng root and rhizome

ISO 20498-2:2017

Traditional Chinese medicine -- Computerized tongue image analysis system -- Part 2: Light environment

ISO 6259-2:1997

Thermoplastics pipes -- Determination of tensile properties -- Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)

ISO 23208:2017

Cryogenic vessels -- Cleanliness for cryogenic service

ISO 15320:2011

Pulp, paper and board -- Determination of pentachlorophenol in an aqueous extract

ISO 12490:2011

Petroleum and natural gas industries -- Mechanical integrity and sizing of actuators and mounting kits for pipeline valves

ISO 10791-7:2014

Test conditions for machining centres -- Part 7: Accuracy of finished test pieces

ISO 5127:2017

Information and documentation -- Foundation and vocabulary

ISO 8791-4:2007

Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 4: Print-surf method

ISO 630-3:2012

Structural steels -- Part 3: Technical delivery conditions for fine-grain structural steels

ISO 5682-3:2017

Equipment for crop protection -- Spraying equipment -- Part 3: Test method to assess the performance of volume/area adjustment systems

ISO 13400-1:2011

Road vehicles -- Diagnostic communication over Internet Protocol (DoIP) -- Part 1: General information and use case definition

ISO 5682-2:2017

Equipment for crop protection -- Spraying equipment -- Part 2: Test methods to assess the horizontal transverse distribution for hydraulic sprayers

ISO 16817:2017

Building environment design -- Indoor environment -- Design process for the visual environment

ISO 5682-1:2017

Equipment for crop protection -- Spraying equipment -- Part 1: Test methods for sprayer nozzles

ISO 8041-1:2017

Human response to vibration -- Measuring instrumentation -- Part 1: General purpose vibration meters

ISO 630-4:2012

Structural steels -- Part 4: Technical delivery conditions for high-yield-strength quenched and tempered structural steel plates

ISO 16883:2007

Packaging -- Transport packages for dangerous goods -- Test methods for large packagings

ISO/IEC 29100:2011

Information technology -- Security techniques -- Privacy framework

ISO 16063-45:2017

Methods for the calibration of vibration and shock transducers -- Part 45: In-situ calibration of transducers with built in calibration coil

ISO 16392:2017

Tyres -- Electrical resistance -- Test method for measuring electrical resistance of tyres on a test rig

ISO/IEC/IEEE 15939:2017

Systems and software engineering -- Measurement process

ISO 15257:2017

Cathodic protection -- Competence levels of cathodic protection persons -- Basis for a certification scheme

ISO 630-2:2011

Structural steels -- Part 2: Technical delivery conditions for structural steels for general purposes

ISO 630-1:2011

Structural steels -- Part 1: General technical delivery conditions for hot-rolled products

ISO 9110-2:1990

Hydraulic fluid power -- Measurement techniques -- Part 2: Measurement of average steady-state pressure in a closed conduit

ISO 9110-1:1990

Hydraulic fluid power -- Measurement techniques -- Part 1: General measurement principles

ISO 10140-4:2010

Acoustics -- Laboratory measurement of sound insulation of building elements -- Part 4: Measurement procedures and requirements

ISO 7886-1:2017

Sterile hypodermic syringes for single use -- Part 1: Syringes for manual use

ISO 8273:1985

Doors and doorsets -- Standard atmospheres for testing the performance of doors and doorsets placed between different climates

ISO/IEC 14496-12:2015/Amd 1:2017

DRC Extensions

ISO 16664:2017

Gas analysis -- Handling of calibration gases and gas mixtures -- Guidelines

ISO 8501-4:2006

Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 4: Initial surface conditions, preparation grades and flash rust grades in connection with high-pressure water jetting

ISO 1997:1992

Granulated cork and cork powder -- Classification, properties and packing

ISO 10426-3:2003

Petroleum and natural gas industries -- Cements and materials for well cementing -- Part 3: Testing of deepwater well cement formulations

ISO 2454:1995

Rubber products -- Determination of zinc content -- EDTA titrimetric method

ISO/IEC 30182:2017

Smart city concept model -- Guidance for establishing a model for data interoperability

ISO 14174:2012

Welding consumables -- Fluxes for submerged arc welding and electroslag welding -- Classification

ISO/IEC 18000-3:2010

Information technology -- Radio frequency identification for item management -- Part 3: Parameters for air interface communications at 13,56 MHz

ISO 3008:2007

Fire-resistance tests -- Door and shutter assemblies

ISO 3875:2004

Machine tools -- Test conditions for external cylindrical centreless grinding machines -- Testing of the accuracy

ISO 6272-1:2011

Paints and varnishes -- Rapid-deformation (impact resistance) tests -- Part 1: Falling-weight test, large-area indenter

ISO 294-1:2017

Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 1: General principles, and moulding of multipurpose and bar test specimens

ISO/IEC 27034-1:2011

Information technology -- Security techniques -- Application security -- Part 1: Overview and concepts

ISO 7787-3:2017

Dentistry -- Laboratory cutters -- Part 3: Carbide cutters for milling machines

ISO 23993:2008

Thermal insulation products for building equipment and industrial installations -- Determination of design thermal conductivity

ISO 23671:2015

Passenger car tyres -- Method for measuring relative wet grip performance -- Loaded new tyres

ISO 19731:2017

Digital analytics and web analyses for purposes of market, opinion and social research -- Vocabulary and service requirements

ISO 14555:2017

Welding -- Arc stud welding of metallic materials

ISO 5971:2017

Size designation of clothes -- Tights

ISO 2972:1979

Numerical control of machines -- Symbols

ISO 1833-18:2006

Textiles -- Quantitative chemical analysis -- Part 18: Mixtures of silk and wool or hair (method using sulfuric acid)

ISO 1833-16:2006

Textiles -- Quantitative chemical analysis -- Part 16: Mixtures of polypropylene fibres and certain other fibres (method using xylene)

ISO 13326:1998

Test methods for measuring tyre uniformity

ISO 8502-9:1998

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 9: Field method for the conductometric determination of water-soluble salts

ISO 9184-6:1994

Paper, board and pulps -- Fibre furnish analysis -- Part 6: Determination of fibre coarseness

ISO/IEC 11770-5:2011

Information technology -- Security techniques -- Key management -- Part 5: Group key management

ISO/IEC 11695-3:2017

Identification cards -- Optical memory cards -- Holographic recording method -- Part 3: Optical properties and characteristics

ISO 13053-2:2011

Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques

ISO/IEC 24760-1:2011

Information technology -- Security techniques -- A framework for identity management -- Part 1: Terminology and concepts

ISO 13053-1:2011

Quantitative methods in process improvement -- Six Sigma -- Part 1: DMAIC methodology

ISO 26021-2:2008

Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 2: Communication requirements

ISO 2431:2011

Paints and varnishes -- Determination of flow time by use of flow cups

ISO 8686-5:2017

Cranes -- Design principles for loads and load combinations -- Part 5: Overhead travelling and portal bridge cranes

ISO 6428:1982

Technical drawings -- Requirements for microcopying

ISO/IEC 24753:2011

Information technology -- Radio frequency identification (RFID) for item management -- Application protocol: encoding and processing rules for sensors and batteries

ISO 3035:2011

Corrugated fibreboard -- Determination of flat crush resistance

ISO/IEC 18033-4:2011

Information technology -- Security techniques -- Encryption algorithms -- Part 4: Stream ciphers

ISO 12303:1995

Plain bearings -- Quality characteristics -- Calculation of machine and process capabilities

ISO 9017:2001

Destructive tests on welds in metallic materials -- Fracture test

ISO 19828:2017

Welding for aerospace applications -- Visual inspection of welds

ISO 21940-2:2017

Mechanical vibration -- Rotor balancing -- Part 2: Vocabulary

ISO 3651-3:2017

Determination of resistance to intergranular corrosion of stainless steels -- Part 3: Corrosion test for low-Cr ferritic stainless steels

ISO 10993-16:2017

Biological evaluation of medical devices -- Part 16: Toxicokinetic study design for degradation products and leachables

ISO 11687-2:1995

Plain bearings -- Pedestal plain bearings -- Part 2: Side flange bearings

ISO/IEC 24730-5:2010

Information technology -- Real-time locating systems (RTLS) -- Part 5: Chirp spread spectrum (CSS) at 2,4 GHz air interface

ISO 11687-1:1995

Plain bearings -- Pedestal plain bearings -- Part 1: Pillow blocks

ISO 2772-2:1974

Test conditions for box type vertical drilling machines -- Testing of the accuracy -- Part 2: Practical test

ISO 2772-1:1973

Test conditions for box type vertical drilling machines -- Testing of the accuracy -- Part 1: Geometrical tests

ISO 1408:1995

Rubber -- Determination of carbon black content -- Pyrolytic and chemical degradation methods

ISO 13920:1996

Welding -- General tolerances for welded constructions -- Dimensions for lengths and angles -- Shape and position

ISO 3055:1985

Kitchen equipment -- Coordinating sizes

ISO/IEC 19773:2011

Information technology -- Metadata Registries (MDR) modules

ISO 16708:2006

Petroleum and natural gas industries -- Pipeline transportation systems -- Reliability-based limit state methods

ISO 11687-3:1995

Plain bearings -- Pedestal plain bearings -- Part 3: Centre flange bearings

ISO 6372:2017

Nickel and nickel alloys -- Terms and definitions

ISO 6482:2017

Shipbuilding -- Deck machinery -- Warping end profiles

ISO 22241-3:2017

Diesel engines -- NOx reduction agent AUS 32 -- Part 3: Handling, transportation, and storage

ISO 3681:1996

Binders for paints and varnishes -- Determination of saponification value -- Titrimetric method

ISO 8502-6:2006

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 6: Extraction of soluble contaminants for analysis -- The Bresle method

ISO 20308:2017

Traditional Chinese medicine -- Gua Sha instruments

ISO 19970:2017

Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels -- Metering of gas as fuel on LNG carriers during cargo transfer operations

ISO 19240:2017

Industrial valves -- Lined metal quarter turn and check valves for chemical process and related industries

ISO 11290-2:2017

Microbiology of the food chain -- Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. -- Part 2: Enumeration method

ISO 11290-1:2017

Microbiology of the food chain -- Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. -- Part 1: Detection method

ISO 15230:2007

Mechanical vibration and shock -- Coupling forces at the man--machine interface for hand-transmitted vibration

ISO 5395-2:2013/Amd 2:2017

Cutting-means-enclosure guards

ISO 11837:2011

Machinery for forestry -- Saw chain shot guarding systems -- Test method and performance criteria

ISO 8566-5:2017

Cranes -- Cabins and control stations -- Part 5: Overhead travelling and portal bridge cranes

ISO 15836-1:2017

Information and documentation -- The Dublin Core metadata element set -- Part 1: Core elements

ISO 10791-10:2007

Test conditions for machining centres -- Part 10: Evaluation of thermal distortions

ISO 8248:1985

Windows and door height windows -- Mechanical tests

ISO 16792:2015

Technical product documentation -- Digital product definition data practices

ISO 3098-4:2000

Technical product documentation -- Lettering -- Part 4: Diacritical and particular marks for the Latin alphabet

 

ISO 3098-6:2000

Technical product documentation -- Lettering -- Part 6: Cyrillic alphabet

ISO 4342:1985

Numerical control of machines -- NC processor input -- Basic part program reference language

ISO 931:1980

Green bananas -- Guide to storage and transport

ISO 5751-2:2010

Motorcycle tyres and rims (metric series) -- Part 2: Tyre dimensions and load-carrying capacities

ISO 5751-1:2010

Motorcycle tyres and rims (metric series) -- Part 1: Design guides

ISO 5751-3:2010

Motorcycle tyres and rims (metric series) -- Part 3: Range of approved rim contours

ISO/IEC 9594-8:2017

Information technology -- Open Systems Interconnection -- The Directory -- Part 8: Public-key and attribute certificate frameworks

ISO/IEC 9594-9:2017

Information technology -- Open Systems Interconnection -- The Directory -- Part 9: Replication

ISO/IEC 9797-3:2011

Information technology -- Security techniques -- Message Authentication Codes (MACs) -- Part 3: Mechanisms using a universal hash-function

ISO 19611:2017

Traditional Chinese medicine -- Air extraction cupping device

ISO/IEC 9594-6:2017

Information technology -- Open Systems Interconnection -- The Directory -- Part 6: Selected attribute types

ISO/IEC 9594-7:2017

Information technology -- Open Systems Interconnection -- The Directory -- Part 7: Selected object classes

ISO 15379-1:2015

Carbonaceous materials for the production of aluminium -- Cathode block materials -- Part 1: Determination of the expansion due to sodium penetration with application of pressure

ISO 10143:2014

Carbonaceous materials for the production of aluminium -- Calcined coke for electrodes -- Determination of the electrical resistivity of granules

ISO/IEC 9594-4:2017

Information technology -- Open Systems Interconnection -- The Directory -- Part 4: Procedures for distributed operation

ISO 11731:2017

Water quality -- Enumeration of Legionella

ISO/IEC 9594-5:2017

Information technology -- Open Systems Interconnection -- The Directory -- Part 5: Protocol specifications

ISO/IEC 9594-2:2017

Information technology -- Open Systems Interconnection -- The Directory -- Part 2: Models

ISO/IEC 9594-3:2017

Information technology -- Open Systems Interconnection -- The Directory -- Part 3: Abstract service definition

ISO/IEC 9594-1:2017

Information technology -- Open Systems Interconnection -- The Directory -- Part 1: Overview of concepts, models and services

ISO 14823:2017

Intelligent transport systems -- Graphic data dictionary

ISO 10209:2012

Technical product documentation -- Vocabulary -- Terms relating to technical drawings, product definition and related documentation

ISO 7286:1986

Graphical symbols for resistance welding equipment

ISO 22156:2004

Bamboo -- Structural design

ISO 4209-2:2012

Truck and bus tyres and rims (metric series) -- Part 2: Rims

ISO 22400-2:2014/Amd 1:2017

Key performance indicators for energy management

ISO 17512-2:2011

Soil quality -- Avoidance test for determining the quality of soils and effects of chemicals on behaviour -- Part 2: Test with collembolans (Folsomia candida)

ISO 15798:2013/Amd 1:2017

ISO/ASTM 51205:2017

Practice for use of a ceric-cerous sulfate dosimetry system

ISO 6779:1981

Acceptance conditions for broaching machines of vertical internal type -- Testing of accuracy

ISO 12308:2017

Plain bearings -- Quality assurance of sample types -- Definitions, applications and testing

ISO 2806:1994

Industrial automation systems -- Numerical control of machines -- Vocabulary

ISO 19614:2017

Traditional Chinese medicine -- Pulse graph force transducer

ISO 15512:2016

Plastics -- Determination of water content

ISO 4548-12:2017

Methods of test for full-flow lubricating oil filters for internal combustion engines -- Part 12: Filtration efficiency using particle counting and contaminant retention capacity

ISO 12137:2011

Paints and varnishes -- Determination of mar resistance

ISO 14428:2005

Carbonaceous materials for the production of aluminium -- Cold and tepid ramming pastes -- Expansion/shrinkage during baking

ISO 9380:1990

Doorsets -- Repeated torsion test

ISO 12108:2012

Metallic materials -- Fatigue testing -- Fatigue crack growth method

ISO 1518-2:2011

Paints and varnishes -- Determination of scratch resistance -- Part 2: Variable-loading method

ISO 11475:2017

Paper and board -- Determination of CIE whiteness, D65/10 degrees (outdoor daylight)

ISO 1518-1:2011

Paints and varnishes -- Determination of scratch resistance -- Part 1: Constant-loading method