ISO/IEC 10746-4:1998.
Information technology -- Open Distributed Processing -- Reference Model: Architectural semantics
ISO/IEC 14543-5-9:2017.
Information technology -- Home electronic systems (HES) architecture -- Part 5-9: Intelligent grouping and resource sharing for HES class 2 and class 3 -- Remote access service platform.
ISO/IEC 10746-1:1998
Information technology -- Open Distributed Processing -- Reference model: Overview
ISO 6070:1981
Auxiliary tables for vibration generators -- Methods of describing equipment characteristics
ISO/IEC 14543-5-8:2017
Information technology -- Home electronic systems (HES) architecture -- Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 -- Remote access core protocol
ISO 7250-1:2017
Basic human body measurements for technological design -- Part 1: Body measurement definitions and landmarks
ISO 37154:2017
Smart community infrastructures -- Best practice guidelines for transportation
ISO 18369-1:2017
Ophthalmic optics -- Contact lenses -- Part 1: Vocabulary, classification system and recommendations for labelling specifications
ISO/IEC 15946-5:2017
Information technology -- Security techniques -- Cryptographic techniques based on elliptic curves -- Part 5: Elliptic curve generation
ISO 18369-2:2017
Ophthalmic optics -- Contact lenses -- Part 2: Tolerances
ISO 8289:2000
Vitreous and porcelain enamels -- Low voltage test for detecting and locating defects
ISO 22768:2017
Rubber, raw -- Determination of the glass transition temperature by differential scanning calorimetry (DSC)
ISO 873:1980
Peaches -- Guide to cold storage
ISO 14641-1:2012
Electronic archiving -- Part 1: Specifications concerning the design and the operation of an information system for electronic information preservation
ISO 874:1980
Fresh fruits and vegetables -- Sampling
ISO 1212:1995
Apples -- Cold storage
ISO 6756:1984
Decorticated stone pine nuts -- Specification
ISO/IEC 15026-4:2012
Systems and software engineering -- Systems and software assurance -- Part 4: Assurance in the life cycle
ISO 10890:2010
Paints and varnishes -- Modelling of biocide release rate from antifouling paints by mass-balance calculation
ISO 15967:2007
Direct reduced iron -- Determination of the tumble and abrasion indices of hot briquetted iron (HBI)
ISO 20349-2:2017
Personal protective equipment -- Footwear protecting against risks in foundries and welding -- Part 2: Requirements and test methods for protection against risks in welding and allied processes
ISO 18369-4:2017
Ophthalmic optics -- Contact lenses -- Part 4: Physicochemical properties of contact lens materials
ISO 4250-2:2017
Earth-mover tyres and rims -- Part 2: Loads and inflation pressures
ISO/IEC 20009-4:2017
Information technology -- Security techniques -- Anonymous entity authentication -- Part 4: Mechanisms based on weak secrets
ISO 3669:2017
Vacuum technology -- Bakeable flanges -- Dimensions of knife-edge flanges
ISO 7560:1995
Cucumbers -- Storage and refrigerated transport
ISO 15928-4:2017
Houses -- Description of performance -- Part 4: Fire safety
ISO 23279:2017
Non-destructive testing of welds -- Ultrasonic testing -- Characterization of discontinuities in welds
ISO 10134:2003
Small craft -- Electrical devices -- Lightning-protection systems
ISO 9667:2017
Aircraft ground support equipment -- Tow bars
ISO 81060-1:2007
Non-invasive sphygmomanometers -- Part 1: Requirements and test methods for non-automated measurement type
ISO 1833-11:2017
Textiles -- Quantitative chemical analysis -- Part 11: Mixtures of certain cellulose fibres with certain other fibres (method using sulfuric acid)
ISO 12764:2017
Measurement of fluid flow in closed conduits -- Flowrate measurement by means of vortex shedding flowmeters inserted in circular cross-section conduits running full
ISO 19699-2:2017
Superabsorbent polymer -- Sodium polyacrylate resin for absorbing blood -- Part 2: Specifications
ISO 1833-7:2017
Textiles -- Quantitative chemical analysis -- Part 7: Mixtures of polyamide with certain other fibres (method using formic acid)
ISO 10416:2008
Petroleum and natural gas industries -- Drilling fluids -- Laboratory testing
ISO/IEC 23008-3:2015
Information technology -- High efficiency coding and media delivery in heterogeneous environments -- Part 3: 3D audio
ISO 10414-1:2008
Petroleum and natural gas industries -- Field testing of drilling fluids -- Part 1: Water-based fluids
ISO 9241-125:2017
Ergonomics of human-system interaction -- Part 125: Guidance on visual presentation of information
ISO 9455-13:2017
Soft soldering fluxes -- Test methods -- Part 13: Determination of flux spattering
ISO 9455-11:2017
Soft soldering fluxes -- Test methods -- Part 11: Solubility of flux residues
ISO 4009:2000
Commercial vehicles -- Location of electrical and pneumatic connections between towing vehicles and trailers
ISO 9455-15:2017
Soft soldering fluxes -- Test methods -- Part 15: Copper corrosion test
ISO 9455-14:2017
Soft soldering fluxes -- Test methods -- Part 14: Assessment of tackiness of flux residues
ISO 4582:2017
Plastics -- Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources
ISO/IEC 18046-2:2011
Information technology -- Radio frequency identification device performance test methods -- Part 2: Test methods for interrogator performance
ISO 18369-3:2017
Ophthalmic optics -- Contact lenses -- Part 3: Measurement methods
ISO 24817:2017
Petroleum, petrochemical and natural gas industries -- Composite repairs for pipework -- Qualification and design, installation, testing and inspection
ISO 6478:1990
Peanuts -- Specification
ISO 18828-3:2017
Industrial automation systems and integration -- Standardized procedures for production systems engineering -- Part 3: Information flows in production planning processes
ISO 11214:1996
Modified starch -- Determination of carboxyl group content of oxidized starch
ISO 14050:2009
Environmental management -- Vocabulary
ISO 11215:1998
Modified starch -- Determination of adipic acid content of acetylated di-starch adipates -- Gas chromatographic method
ISO 1547:1975
Aircraft -- Precision fuse-links -- General requirements
ISO 1549:1976
Aircraft -- Precision fuse-links -- Type B
ISO 1548:1976
Aircraft -- Precision fuse-links -- Type A
ISO 19668:2017
Surface chemical analysis -- X-ray photoelectron spectroscopy -- Estimating and reporting detection limits for elements in homogeneous materials
ISO 3456:1975
Aircraft -- Lever-operated manual switches (Class 3) -- Performance requirements
ISO 15407-2:2003
Pneumatic fluid power -- Five-port directional control valves, sizes 18 mm and 26 mm -- Part 2: Mounting interface surfaces with optional electrical connector
ISO 11997-1:2017
Paints and varnishes -- Determination of resistance to cyclic corrosion conditions -- Part 1: Wet (salt fog)/dry/humid
ISO/IEC 16085:2006
Systems and software engineering -- Life cycle processes -- Risk management
ISO 9296:2017
Acoustics -- Declared noise emission values of information technology and telecommunications equipment
ISO 3902:1990
Shipbuilding and marine structures -- Gaskets for rectangular windows and side scuttles
ISO/IEC 23001-4:2017
Information technology -- MPEG systems technologies -- Part 4: Codec configuration representation
ISO 8791-3:2017
Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 3: Sheffield method
ISO 11783-5:2011
Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 5: Network management
ISO 10207:1991
Rock drilling equipment -- Rope threaded drill steel equipment for percussive drilling, nominal sizes 22 mm to 38 mm
ISO 15609-1:2004
Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 1: Arc welding
ISO 15181-3:2007
Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 3: Calculation of the zinc ethylene-bis(dithiocarbamate) (zineb) release rate by determination of the concentration of ethylenethiourea in the extract
ISO 15242-3:2017
Rolling bearings -- Measuring methods for vibration -- Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface
ISO 4698:2007
Iron ore pellets for blast furnace feedstocks -- Determination of the free-swelling index
ISO/IEC 13818-1:2015
Information technology -- Generic coding of moving pictures and associated audio information -- Part 1: Systems
ISO 15242-4:2017
Rolling bearings -- Measuring methods for vibration -- Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface
ISO 20654:2017
Graphic technology -- Measurement and calculation of spot colour tone value
ISO 20058:2017
General purpose rubber thread -- Specification
ISO 8000-2:2017
Data quality -- Part 2: Vocabulary
ISO 18504:2017
Soil quality -- Sustainable remediation
ISO 13373-7:2017
Condition monitoring and diagnostics of machines -- Vibration condition monitoring -- Part 7: Diagnostic techniques for machine sets in hydraulic power generating and pump-storage plants
ISO 19683:2017
Space systems -- Design qualification and acceptance tests of small spacecraft and units
ISO 10208:1991
Rock drilling equipment -- Left-hand rope threads
ISO 2042:1973
Aircraft electrical circuit diagrams
ISO 21294:2017
Oilseeds -- Manual or automatic discontinuous sampling
ISO 3584:2001
Road vehicles -- Drawbar couplings -- Interchangeability
ISO/IEC/IEEE 8802-1Q:2016/Amd 3:2017
Enhancements for scheduled traffic
ISO/IEC 90003:2014
Software engineering -- Guidelines for the application of ISO 9001:2008 to computer software
ISO 6301-2:2006
Pneumatic fluid power -- Compressed-air lubricators -- Part 2: Test methods to determine the main characteristics to be included in supplier's literature
ISO/IEC 14496-22:2015/Amd 2:2017
Updated text layout features and implementations
ISO 17717:2017
Meteorological balloons -- Specification
ISO 17059:2007
Oilseeds -- Extraction of oil and preparation of methyl esters of triglyceride fatty acids for analysis by gas chromatography (Rapid method)
ISO 11037:2011
Sensory analysis -- Guidelines for sensory assessment of the colour of products
ISO 22875:2017
Nuclear energy -- Determination of chlorine and fluorine in uranium dioxide powder and sintered pellets
ISO 4394-1:1980
Fluid power systems and components -- Cylinder barrels -- Part 1: Requirements for steel tubes with specially finished bores
ISO 556:1980
Coke (greater than 20 mm in size) -- Determination of mechanical strength
ISO 19072-2:2013
Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 2: Test methods and general performance requirements
ISO 2156:1974
Aircraft -- Fire-resisting electrical cables -- Methods of test
ISO 17266:2002
Cinematography -- Multichannel analogue and digital photographic sound and control records on 35 mm motion-picture prints and negatives, and digital sound-control records on 70 mm motion-picture prints and negatives -- Position and width dimensions
ISO 2155:1974
Aircraft -- Fire-resisting electrical cables -- Performance requirements
ISO 11236:2017
Rubber compounding ingredients -- p-Phenylenediamine antidegradants (PPDs) -- Test methods
ISO 12052:2017
Health informatics -- Digital imaging and communication in medicine (DICOM) including workflow and data management
ISO 2592:2017
Petroleum and related products -- Determination of flash and fire points -- Cleveland open cup method
ISO 14271:2017
Resistance welding -- Vickers hardness testing (low-force and microhardness) of resistance spot, projection, and seam welds
ISO 8996:2004
Ergonomics of the thermal environment -- Determination of metabolic rate
ISO 29842:2011
Sensory analysis -- Methodology -- Balanced incomplete block designs
ISO 15110:2017
Paints and varnishes -- Artificial weathering including acidic deposition
ISO 12099:2017
Animal feeding stuffs, cereals and milled cereal products -- Guidelines for the application of near infrared spectrometry
ISO 7919-4:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on rotating shafts -- Part 4: Gas turbine sets with fluid-film bearings
ISO 18278-3:2017
Resistance welding -- Weldability -- Part 3: Evaluation procedures for weldability in spot weld bonding
ISO/IEC 13235-3:1998
Information technology -- Open Distributed Processing -- Trading Function -- Part 3: Provision of Trading Function using OSI Directory service
ISO 2575:2010/Amd 6:2017
ISO 13943:2017
Fire safety -- Vocabulary
ISO 7462:1985
Shipbuilding -- Principal ship dimensions -- Terminology and definitions for computer applications
ISO 1991-2:1995
Vegetables -- Nomenclature -- Part 2: Second list
ISO 7925:1999
Dried oregano (Origanum vulgare L.) -- Whole or ground leaves -- Specification
ISO 11659-1:1995
Textile machinery and accessories -- Machine parts in contact with textile processing oils -- Part 1: Determination of anticorrosive effect upon steel
ISO 6149-4:2017
Connections for fluid power and general use -- Ports and stud ends with ISO 261 metric threads and O-ring sealing -- Part 4: Dimensions, design, test methods and requirements for external hex and internal hex port plugs
ISO 10427-1:2001
Petroleum and natural gas industries -- Equipment for well cementing -- Part 1: Casing bow-spring centralizers
ISO 493:1975
Aircraft -- Dimensions for single-hole mounting (Class 1 and Class 2) lever-operated manual switches
ISO 1036:1984
Textile machinery -- Dyeing and finishing machines -- Definition of left and right sides
ISO/IEC 14496-22:2015
Information technology -- Coding of audio-visual objects -- Part 22: Open Font Format
ISO 6183:2009/Amd 1:2017
ISO/IEC 14496-15:2017
Information technology -- Coding of audio-visual objects -- Part 15: Carriage of network abstraction layer (NAL) unit structured video in the ISO base media file format
ISO 1990-2:1985
Fruits -- Nomenclature -- Second list
ISO 8426:2008
Hydraulic fluid power -- Positive displacement pumps and motors -- Determination of derived capacity
ISO 19674:2017
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Methods of test for ceramic coatings -- Determination of internal stress in ceramic coatings by application of the Stoney formula
ISO 11978:2017
Ophthalmic optics -- Contact lenses and contact lens care products -- Labelling
ISO 16000-33:2017
Indoor air -- Part 33: Determination of phthalates with gas chromatography/mass spectrometry (GC/MS)
ISO 15548-3:2008
Non-destructive testing -- Equipment for eddy current examination -- Part 3: System characteristics and verification
ISO 9096:2017
Stationary source emissions -- Manual determination of mass concentration of particulate matter
ISO/IEC/IEEE 8802-1AB:2017
Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 1AB: Station and media access control connectivity discovery
ISO 7919-4:2009/Amd 1:2017
ISO 11213:1995
Modified starch -- Determination of acetyl content -- Enzymatic method
ISO 20401:2017
Pneumatic fluid power systems -- Directional control valves -- Specification of pin assignment for 8 mm and 12 mm diameter electrical round connectors
ISO 17231:2017
Leather -- Physical and mechanical tests -- Determination of water repellency of garment leather
ISO 1466:1973
Lever-operated manual switches for aircraft -- Performance requirements
ISO 20015:2017
Spherical plain bearings -- Method for the calculation of static and dynamic load ratings
ISO 15996:2017
Gas cylinders -- Residual pressure valves -- Specification and type testing of cylinder valves incorporating residual pressure devices
ISO 7922:1985
Leeks -- Guide to cold storage and refrigerated transport
ISO 2575:2010/Amd 7:2017
ISO 7525:1985
Nickel -- Determination of sulfur content -- Methylene blue molecular absorption spectrometric method after generation of hydrogen sulfide
ISO 3364:2017
Indexable hardmetal (carbide) inserts with rounded corners, with cylindrical fixing hole -- Dimensions
ISO 22682:2017
Iron ores -- Determination of trace elements -- Plasma spectrometric method
ISO 14997:2017
Optics and photonics -- Test methods for surface imperfections of optical elements
ISO 19659-1:2017
Railway applications -- Heating, ventilation and air conditioning systems for rolling stock -- Part 1: Terms and definitions
ISO 14692-1:2017
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 1: Vocabulary, symbols, applications and materials
ISO 14692-2:2017
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 2: Qualification and manufacture
ISO 14692-3:2017
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 3: System design
ISO 14692-4:2017
Petroleum and natural gas industries -- Glass-reinforced plastics (GRP) piping -- Part 4: Fabrication, installation and operation
ISO 12122-6:2017
Timber structures -- Determination of characteristic values -- Part 6: Large components and assemblies
ISO/IEC 30107-3:2017
Information technology -- Biometric presentation attack detection -- Part 3: Testing and reporting
ISO/ASTM 51431:2005
Practice for dosimetry in electron beam and X-ray (bremsstrahlung) irradiation facilities for food processing
ISO 6973:1986
Drop-forged rivetless chains for conveyors
ISO 12619-12:2017
Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components -- Part 12: Gas-tight housing and ventilation hoses
ISO 12619-11:2017
Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components -- Part 11: Excess flow valve
ISO 28500:2017
Information and documentation -- WARC file format
ISO 19155-2:2017
Geographic information -- Place Identifier (PI) architecture -- Part 2: Place Identifier (PI) linking
ISO 2321:2017
Rubber threads -- Methods of test
ISO 12619-13:2017
Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components -- Part 13: Rigid fuel line in stainless steel
ISO 9719:1995
Root vegetables -- Cold storage and refrigerated transport
ISO 12619-8:2017
Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components -- Part 8: Pressure indicator
ISO 20333:2017
Traditional Chinese medicine -- Coding rules for Chinese medicines in supply chain management
ISO 12619-10:2017
Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components -- Part 10: Pressure relief device (PRD)
ISO 12619-9:2017
Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components -- Part 9: Pressure relief valve (PRV)
ISO/IEC 23008-1:2017
Information technology -- High efficiency coding and media delivery in heterogeneous environments -- Part 1: MPEG media transport (MMT)
ISO 10842:2017
Aircraft -- Ground service connections -- Locations and types
ISO 10816-4:2009
Mechanical vibration -- Evaluation of machine vibration by measurements on non-rotating parts -- Part 4: Gas turbine sets with fluid-film bearings
ISO 18753:2017
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of absolute density of ceramic powders by pycnometer
ISO 2082:2017
Metallic and other inorganic coatings -- Electroplated coatings of cadmium with supplementary treatments on iron or steel
ISO 8178-3:1994
Reciprocating internal combustion engines -- Exhaust emission measurement -- Part 3: Definitions and methods of measurement of exhaust gas smoke under steady-state conditions
ISO 6663:1995
Garlic -- Cold storage
ISO 13260:2010/Amd 1:2017
ISO 4401:2005
Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces
ISO 4406:2017
Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
ISO 20523:2017
Carbon based films -- Classification and designations
ISO 3927:2017
Metallic powders, excluding powders for hardmetals -- Determination of compressibility in uniaxial compression
ISO/IEC 20243:2015
Information Technology -- Open Trusted Technology ProviderTM Standard (O-TTPS) -- Mitigating maliciously tainted and counterfeit products
ISO 25619-1:2008
Geosynthetics -- Determination of compression behaviour -- Part 1: Compressive creep properties
ISO/IEC/IEEE 8802-1Q:2016/Amd 1:2017
Path control and reservation
ISO 7404-4:2017
Methods for the petrographic analysis of coals -- Part 4: Method of determining microlithotype, carbominerite and minerite composition
ISO/IEC 13251:2004
Collection of graphical symbols for office equipment
ISO 6707-3:2017
Buildings and civil engineering works -- Vocabulary -- Part 3: Sustainability terms
ISO 9917-2:2017
Dentistry -- Water-based cements -- Part 2: Resin-modified cements
ISO 19361:2017
Measurement of radioactivity -- Determination of beta emitters activities -- Test method using liquid scintillation counting
ISO 12619-15:2017
Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components -- Part 15: Filter
ISO 15181-2:2007
Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 2: Determination of copper-ion concentration in the extract and calculation of the release rate
ISO 12619-14:2017
Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components -- Part 14: Flexible fuel line
ISO 18647:2017
Petroleum and natural gas industries -- Modular drilling rigs for offshore fixed platforms
ISO 12619-16:2017
Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components -- Part 16: Fittings
ISO 16613-1:2017
Graphic technology -- Variable content replacement -- Part 1: Using PDF/X for variable content replacement (PDF/VCR-1)
ISO 1506:1982
Textile machinery -- Dyeing, finishing and allied machinery -- Classification and nomenclature
ISO 3046-6:1990
Reciprocating internal combustion engines -- Performance -- Part 6: Overspeed protection
ISO 1505:1993
Textile machinery -- Widths relating to dyeing and finishing machines -- Definitions and range of nominal widths
ISO 15181-1:2007
Paints and varnishes -- Determination of release rate of biocides from antifouling paints -- Part 1: General method for extraction of biocides
ISO 8930:1987
General principles on reliability for structures -- List of equivalent terms
ISO 10987-2:2017
Earth-moving machinery -- Sustainability -- Part 2: Remanufacturing
ISO 20155:2017
Ships and marine technology -- Test method of flow induced in-pipe noise source characteristics for a ship-used pump
ISO 22915-13:2012
Industrial trucks -- Verification of stability -- Part 13: Rough-terrain trucks with mast
ISO 10987-3:2017
Earth-moving machinery -- Sustainability -- Part 3: Used machines
ISO 20851:2017
Synthetic rubber latex -- Examination for microorganisms
ISO 10458:1993
Textile machinery -- Square bars for winding devices relating to dyeing and finishing machines -- Dimensions
ISO 10459:1992
Textile machinery -- Dyeing and finishing machines -- Designation of operating ranges of component parts
ISO 4675:2017
Rubber- or plastics-coated fabrics -- Low-temperature bend test
ISO 15633:2017
Iron ores -- Determination of nickel -- Flame atomic absorption spectrometric method
ISO 3616:2001/Amd 1:2017
ISO 5516:1978
Fruits, vegetables and derived products -- Decomposition of organic matter prior to analysis -- Ashing method
ISO/IEC 29151:2017
Information technology -- Security techniques -- Code of practice for personally identifiable information protection
ISO 6178:1983
Centrifuges -- Construction and safety rules -- Method for the calculation of the tangential stress in the shell of a cylindrical centrifuge rotor
ISO 12643-5:2010
Graphic technology -- Safety requirements for graphic technology equipment and systems -- Part 5: Stand-alone platen presses
ISO 11525-2:2015
Rough-terrain trucks -- User requirements -- Part 2: Slewing variable-reach trucks
ISO 10457:2002
Textile machinery -- Dyeing and finishing machines -- Nominal speeds
ISO 11554:2017
Optics and photonics -- Lasers and laser-related equipment -- Test methods for laser beam power, energy and temporal characteristics
ISO 5250:2003
Textile machinery and accessories -- Dyeing and finishing machinery -- Terms for tentering and heat-treatment machinery
ISO 5248:2003
Textile machinery and accessories -- Dyeing and finishing machinery -- Vocabulary for ancillary devices
ISO 11114-1:2012
Gas cylinders -- Compatibility of cylinder and valve materials with gas contents -- Part 1: Metallic materials
ISO 29993:2017
Learning services outside formal education -- Service requirements
ISO 7243:2017
Ergonomics of the thermal environment -- Assessment of heat stress using the WBGT (wet bulb globe temperature) index
ISO 19699-1:2017
Superabsorbent polymer -- Sodium polyacrylate resin for absorbing blood -- Part 1: Test methods
ISO/IEC/IEEE 42010:2011
Systems and software engineering -- Architecture description
ISO 10110-7:2017
Optics and photonics -- Preparation of drawings for optical elements and systems -- Part 7: Surface imperfections
ISO 4241:2013
Cinematography -- Projection leader (time-based), trailer and cue marks -- Specifications
ISO 10816-3:2009/Amd 1:2017
ISO 10816-4:2009/Amd 1:2017
ISO 16142-2:2017
Medical devices -- Recognized essential principles of safety and performance of medical devices -- Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
ISO 25649-1:2017
Floating leisure articles for use on and in the water -- Part 1: Classification, materials, general requirements and test methods
ISO 25649-2:2017
Floating leisure articles for use on and in the water -- Part 2: Consumer information
ISO 3132:1975
Wood -- Testing in compression perpendicular to grain
ISO 25649-3:2017
Floating leisure articles for use on and in the water -- Part 3: Additional specific safety requirements and test methods for Class A devices
ISO 16932:2016
Glass in building -- Destructive-windstorm-resistant security glazing -- Test and classification
ISO 25649-4:2017
Floating leisure articles for use on and in the water -- Part 4: Additional specific safety requirements and test methods for Class B devices
ISO 25649-5:2017
Floating leisure articles for use on and in the water -- Part 5: Additional specific safety requirements and test methods for Class C devices
ISO 25649-6:2017
Floating leisure articles for use on and in the water -- Part 6: Additional specific safety requirements and test methods for Class D devices
ISO 25649-7:2017
Floating leisure articles for use on and in the water -- Part 7: Additional specific safety requirements and test methods for Class E devices
ISO 11197:2016
Medical supply units
ISO 5291:2011
Belt drives -- Grooved pulleys for joined classical V-belts -- Groove sections AJ, BJ, CJ and DJ (effective system)
ISO 2846-1:2017
Graphic technology -- Colour and transparency of printing ink sets for four-colour printing -- Part 1: Sheet-fed and heat-set web offset lithographic printing
ISO/IEC 15909-1:2004
Systems and software engineering -- High-level Petri nets -- Part 1: Concepts, definitions and graphical notation
ISO 5378:1978
Starches and derived products -- Determination of nitrogen content by the Kjeldahl method -- Spectrophotometric method
ISO 22855:2008
Fruit and vegetable products -- Determination of benzoic acid and sorbic acid concentrations -- High performance liquid chromatography method
ISO 5519:2008
Fruits, vegetables and derived products -- Determination of sorbic acid content
ISO/IEC 14496-12:2015
Information technology -- Coding of audio-visual objects -- Part 12: ISO base media file format
ISO 15218:2003
Pneumatic fluid power -- 3/2 solenoid valves -- Mounting interface surfaces
ISO 19984-2:2017
Rubber and rubber products -- Determination of biobased content -- Part 2: Biobased carbon content
ISO 19984-3:2017
Rubber and rubber products -- Determination of biobased content -- Part 3: Biobased mass content
ISO 7131:2009/Amd 1:2017
ISO 19984-1:2017
Rubber and rubber products -- Determination of biobased content -- Part 1: General principles and calculation methods using the formulation of the rubber compound
ISO 12569:2017
Thermal performance of buildings and materials -- Determination of specific airflow rate in buildings -- Tracer gas dilution method
ISO 7267-1:2017
Rubber-covered rollers -- Determination of apparent hardness -- Part 1: IRHD method
ISO 7267-3:2017
Rubber-covered rollers -- Determination of apparent hardness -- Part 3: Pusey and Jones method
ISO/IEC 30113-11:2017
Information technology -- Gesture-based interfaces across devices and methods -- Part 11: Single-point gestures for common system actions
ISO 19396-2:2017
Paints and varnishes -- Determination of pH value -- Part 2: pH electrodes with ISFET technology
ISO 19396-1:2017
Paints and varnishes -- Determination of pH value -- Part 1: pH electrodes with glass membrane
ISO 6247:1998
Petroleum products -- Determination of foaming characteristics of lubricating oils
ISO 2678:1985
Environmental tests for aircraft equipment -- Insulation resistance and high voltage tests for electrical equipment
ISO/IEC 13235-1:1998
Information technology -- Open Distributed Processing -- Trading function: Specification
ISO/IEC 23001-12:2015
Information technology -- MPEG systems technologies -- Part 12: Sample Variants in the ISO base media file format
ISO/IEC 20933:2016
Information technology -- Distributed Application Platforms and Services (DAPS) -- Access Systems
ISO 17090-5:2017
Health informatics -- Public key infrastructure -- Part 5: Authentication using Healthcare PKI credentials
ISO 4186:1980
Asparagus -- Guide to storage
ISO 4187:1980
Horse-radish -- Guide to storage
ISO 8589:2007
Sensory analysis -- General guidance for the design of test rooms
ISO 4079:2017
Rubber hoses and hose assemblies -- Textile-reinforced hydraulic types for oil-based or water-based fluids -- Specification
ISO 19280:2017
Corrosion of metals and alloys -- Measurement of critical crevice temperature for cylindrical crevice geometries in ferric chloride solution
ISO 1967:1974
Aircraft -- Fire-resisting electrical cables -- Dimensions, conductor resistance and mass
ISO 1717:1974
Rock drilling -- Rotary drill-rods and rotary drill-bits for dry drilling -- Connecting dimensions
ISO 5446:2017
Ferromanganese -- Specification and conditions of delivery
ISO 25841:2017
Female condoms -- Requirements and test methods
ISO 5065-2:1986
Aircraft -- Magnetic indicators -- Part 2: Tests
ISO 1018:1975
Hard coal -- Determination of moisture-holding capacity
ISO 9927-5:2017
Cranes -- Inspections -- Part 5: Bridge and gantry cranes, including portal and semi-portal cranes and their supporting structures
ISO/IEC 26558:2017
Software and systems engineering -- Methods and tools for variability modelling in software and systems product line
ISO 6943:2017
Rubber, vulcanized -- Determination of tension fatigue
ISO/IEC 26559:2017
Software and systems engineering -- Methods and tools for variability traceability in software and systems product line
ISO 11850:2011
Machinery for forestry -- General safety requirements
ISO/IEC 25010:2011
Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- System and software quality models
ISO 5232:1998
Graphical symbols for textile machinery
ISO 5066-2:1986
Aircraft -- Hermetically sealed monostable electrical relays, 2A and 3A -- Part 2: Type approval tests
ISO 5066-1:1986
Aircraft -- Hermetically sealed monostable electrical relays, 2A and 3A -- Part 1: Operating characteristics and test conditions
ISO 939:1980
Spices and condiments -- Determination of moisture content -- Entrainment method
ISO 11543:2000
Modified starch -- Determination of hydroxypropyl content -- Method using proton nuclear magnetic resonance (NMR) spectrometry
ISO 949:1987
Cauliflowers -- Guide to cold storage and refrigerated transport
ISO 1722:1974
Rock drilling -- Extension drill-steel equipment for percussive long-hole drilling -- Reverse-buttress-threaded equipments 1 1/2 to 2 1/2 in (38 to 64 mm)
ISO 2930:2017
Rubber, raw natural -- Determination of plasticity retention index (PRI)
ISO 1721:1974
Rock drilling -- Extension drill-steel equipment for percussive long-hole drilling -- Reverse-buttress-threaded equipments 1 1/16 and 1 1/4 in (27 and 32 mm)
ISO 19285:2017
Non-destructive testing of welds -- Phased array ultrasonic testing (PAUT) -- Acceptance levels
ISO 14817-3:2017
Intelligent transport systems -- ITS data dictionaries -- Part 3: Object identifier assignments for ITS data concepts
ISO 29464:2017
Cleaning of air and other gases -- Terminology
ISO 13579-11:2017
Industrial furnaces and associated processing equipment -- Method of measuring energy balance and calculating energy efficiency -- Part 11: Evaluation of various kinds of efficiency
ISO 11504:2017
Soil quality -- Assessment of impact from soil contaminated with petroleum hydrocarbons
ISO 5867-1:1996
Aircraft -- Electromagnetic relays and contactors -- Part 1: General requirements
ISO 2074:2007/Amd 1:2017
ISO 721:1991
Rock drilling equipment -- Integral stems
ISO 8232:1988
Closed-circuit dry-cleaning machines -- Defining and checking of machine characteristics
ISO 1718:1991
Rock drilling equipment -- Drill rods with tapered connection for percussive drilling
ISO 722:1991
Rock drilling equipment -- Hollow drill steels in bar form, hexagonal and round
ISO 3282:1976
Aircraft -- Dimensions for single-hole and triple-hole mounting (Class 3) lever-operated manual switches
ISO 723:1991
Rock drilling equipment -- Forged collared shanks and corresponding chuck bushings for hollow hexagonal drill steels
Previous page
Back to top
