ISO/TS 22239-2:2018

Road vehicles -- Child seat presence and orientation detection system (CPOD) -- Part 2: Resonator specification

ISO/TS 22239-1:2018

Road vehicles -- Child seat presence and orientation detection system (CPOD) -- Part 1: Specifications and test methods

ISO/IEC 7816-15:2016/Amd 1:2018

ISO 11979-3:2012

Ophthalmic implants -- Intraocular lenses -- Part 3: Mechanical properties and test methods

ISO 3315:2018

Assembly tools for screws and nuts -- Driving parts for hand-operated square drive socket wrenches -- Dimensions and tests

ISO 3316:2018

Assembly tools for screws and nuts -- Attachments for hand-operated square drive socket wrenches -- Dimensions and tests

ISO 7270-2:2012

Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 2: Determination of styrene/butadiene/isoprene ratio

ISO 17491-5:2013

Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test)

ISO 13982-2:2004

Protective clothing for use against solid particulates -- Part 2: Test method of determination of inward leakage of aerosols of fine particles into suits

ISO 1213-1:1993

Solid mineral fuels -- Vocabulary -- Part 1: Terms relating to coal preparation

ISO 11088:2018

Alpine ski/binding/boot (S-B-B) system -- Assembly, adjustment and inspection

ISO 29661:2012

Reference radiation fields for radiation protection -- Definitions and fundamental concepts

ISO 7176-10:2008

Wheelchairs -- Part 10: Determination of obstacle-climbing ability of electrically powered wheelchairs

ISO 12813:2015

Electronic fee collection -- Compliance check communication for autonomous systems

ISO 12870:2016

Ophthalmic optics -- Spectacle frames -- Requirements and test methods

ISO 18640-2:2018

Protective clothing for firefighters -- Physiological impact -- Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters

ISO 18640-1:2018

Protective clothing for firefighters -- Physiological impact -- Part 1: Measurement of coupled heat and moisture transfer with the sweating torso

ISO/IEC 27034-7:2018

Information technology -- Application security -- Part 7: Assurance prediction framework

ISO 2780:2006

Milling cutters with tenon drive -- Interchangeability dimensions for cutter arbors -- Metric series

ISO 3417:2008

Rubber -- Measurement of vulcanization characteristics with the oscillating disc curemeter

ISO 16329:2003

Ships and marine technology -- Heading control systems for high-speed craft

ISO 6164:2018

Hydraulic fluid power -- Four-screw, one-piece square flange connections for use at pressures of 42 MPa, DN 25 to 80

ISO 1409:2006

Plastics/rubber -- Polymer dispersions and rubber latices (natural and synthetic) -- Determination of surface tension by the ring method

ISO 10318-2:2015/Amd 1:2018

ISO 10318-1:2015/Amd 1:2018

ISO 5910:2018

Cardiovascular implants and extracorporeal systems -- Cardiac valve repair devices

ISO/TS 20175:2018

Vacuum technology -- Vacuum gauges -- Characterization of quadrupole mass spectrometers for partial pressure measurement

ISO/IEC 27034-3:2018

Information technology -- Application security -- Part 3: Application security management process

ISO 16850:2007

Road vehicles -- Pedestrian protection -- Child head impact test method

ISO 6618:1997

Petroleum products and lubricants -- Determination of acid or base number -- Colour-indicator titration method

ISO/TS 13131:2014

Health informatics -- Telehealth services -- Quality planning guidelines

ISO 8768:1987

Packaging -- Complete, filled transport packages -- Toppling test

ISO 7176-11:2012

Wheelchairs -- Part 11: Test dummies

ISO 105-A03:1993

Textiles -- Tests for colour fastness -- Part A03: Grey scale for assessing staining

ISO/IEC 23003-4:2015

Information technology -- MPEG audio technologies -- Part 4: Dynamic Range Control

ISO 13757:1996

Liquefied petroleum gases -- Determination of oily residues -- High-temperature method

ISO 5402-1:2017

Leather -- Determination of flex resistance -- Part 1: Flexometer method

ISO 13758:1996

Liquefied petroleum gases -- Assessment of the dryness of propane -- Valve freeze method

ISO/TS 19392-3:2018

Paints and varnishes -- Coating systems for wind-turbine rotor blades -- Part 3: Determination and evaluation of resistance to rain erosion using water jet

ISO 1928:2009

Solid mineral fuels -- Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value

ISO 15781:2015

Photography -- Digital still cameras -- Measuring shooting time lag, shutter release time lag, shooting rate, and start-up time

ISO 13759:1996

Petroleum products -- Determination of alkyl nitrate in diesel fuels -- Spectrometric method

ISO/TS 19392-2:2018

Paints and varnishes -- Coating systems for wind-turbine rotor blades -- Part 2: Determination and evaluation of resistance to rain erosion using rotating arm

ISO 12985-2:2018

Carbonaceous materials used in the production of aluminium -- Baked anodes and cathode blocks -- Part 2: Determination of apparent density and of open porosity using a hydrostatic method

ISO/TS 3550-3:2015

Cigarettes -- Determination of loss of tobacco from the ends -- Part 3: Method using a vibro-bench

ISO 12985-1:2018

Carbonaceous materials used in the production of aluminium -- Baked anodes and cathode blocks -- Part 1: Determination of apparent density using a dimensions method

ISO 179-2:1997

Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test

ISO 4748:1984

Copper alloys -- Determination of iron content -- Na2EDTA titrimetric method

ISO 12140:2013

Agricultural machinery -- Agricultural trailers and trailed equipment -- Drawbar jacks

ISO 4749:1984

Copper alloys -- Determination of lead content -- Flame atomic absorption spectrometric method

ISO/TS 19392-1:2018

Paints and varnishes -- Coating systems for wind-turbine rotor blades -- Part 1: Minimum requirements and weathering

ISO 4742:1984

Copper alloys -- Determination of nickel content -- Gravimetric method

ISO 4744:1984

Copper and copper alloys -- Determination of chromium content -- Flame atomic absorption spectrometric method

ISO 20950-1:2018

Water quality -- Determination of available weak and dissociable (WAD) cyanide -- Part 1: Method using ligand exchange, flow injection analysis (FIA), gas-diffusion and amperometric detection

ISO 17840-4:2018

Road vehicles -- Information for first and second responders -- Part 4: Propulsion energy identification

ISO/TS 21362:2018

Nanotechnologies -- Analysis of nano-objects using asymmetrical-flow and centrifugal field-flow fractionation

ISO 7638-2:2018

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 2: Connectors for braking systems and running gear of vehicles with 12 V nominal supply voltage

ISO 10794:2018

Space systems -- Programme management -- Material, mechanical parts and processes

ISO 7638-1:2018

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 1: Connectors for braking systems and running gear of vehicles with 24 V nominal supply voltage

ISO 16284:2006

Ophthalmic optics -- Information interchange for ophthalmic optical equipment

ISO 9404-1:1991

Enclosures for protection against ionizing radiation -- Lead shielding units for 150 mm, 200 mm and 250 mm thick walls -- Part 1: Chevron units of 150 mm and 200 mm thickness

ISO/IEC TR 18047-4:2004

Information technology -- Radio frequency identification device conformance test methods -- Part 4: Test methods for air interface communications at 2,45 GHz

ISO 10592:1994

Small craft -- Hydraulic steering systems

ISO 8191-1:1987

Furniture -- Assessment of the ignitability of upholstered furniture -- Part 1: Ignition source: smouldering cigarette

ISO 21457:2010

Petroleum, petrochemical and natural gas industries -- Materials selection and corrosion control for oil and gas production systems

ISO 17491-3:2008

Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 3: Determination of resistance to penetration by a jet of liquid (jet test)

ISO 12129-1:1995

Plain bearings -- Part 1: Fits

ISO 15222:2011

Truck and bus tyres -- Method for measuring relative wet grip performance -- Loaded new tyres

ISO 9980:2012

Belt drives -- Grooved pulleys for V-belts (system based on effective width) -- Geometrical inspection of grooves

ISO/TS 17439:2014

Health informatics -- Development of terms and definitions for health informatics glossaries

ISO 6691:2000

Thermoplastic polymers for plain bearings -- Classification and designation

ISO 4943:1985

Steel and cast iron -- Determination of copper content -- Flame atomic absorption spectrometric method

ISO 10855-2:2018

Offshore containers and associated lifting sets -- Part 2: Design, manufacture and marking of lifting sets

ISO 11009:2000

Petroleum products and lubricants -- Determination of water washout characteristics of lubricating greases

ISO 10855-3:2018

Offshore containers and associated lifting sets -- Part 3: Periodic inspection, examination and testing

ISO 9443:2018

Surface quality classes for hot-rolled bars and wire rod

ISO/IEC 21000-19:2010/Amd 1:2018

Extensions on time-segments and multi-track audio

ISO 17915:2018

Optics and photonics -- Measurement method of semiconductor lasers for sensing

ISO 12004-2:2008

Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 2: Determination of forming-limit curves in the laboratory

ISO 18750:2018

Intelligent transport systems -- Co-operative ITS -- Local dynamic map

ISO 21527-1:2008

Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of yeasts and moulds -- Part 1: Colony count technique in products with water activity greater than 0,95

ISO 39511:2018

Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)

ISO 21527-2:2008

Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of yeasts and moulds -- Part 2: Colony count technique in products with water activity less than or equal to 0,95

ISO 20312:2011

Petroleum and natural gas industries -- Design and operating limits of drill strings with aluminium alloy components

ISO 14152:2001

Neutron radiation protection shielding -- Design principles and considerations for the choice of appropriate materials

ISO 8552:2004

Milk -- Estimation of psychrotrophic microorganisms -- Colony-count technique at 21 degrees C (Rapid method)

ISO 2176:1995

Petroleum products -- Lubricating grease -- Determination of dropping point

ISO 16283-2:2018

Acoustics -- Field measurement of sound insulation in buildings and of building elements -- Part 2: Impact sound insulation

ISO 7240-7:2018

Fire detection and alarm systems -- Part 7: Point-type smoke detectors using scattered light, transmitted light or ionization

ISO 10637:2018

Dentistry -- Central suction source equipment

ISO 11707:2011

Magnesium and its alloys -- Determination of lead and cadmium

ISO 16368:2010

Mobile elevating work platforms -- Design, calculations, safety requirements and test methods

ISO 4256:1996

Liquefied petroleum gases -- Determination of gauge vapour pressure -- LPG method

ISO 21218:2018

Intelligent transport systems -- Hybrid communications -- Access technology support

ISO 18758-1:2018

Mining and earth-moving machinery -- Rock drill rigs and rock reinforcement rigs -- Part 1: Vocabulary

ISO 18758-2:2018

Mining and earth-moving machinery -- Rock drill rigs and rock reinforcement rigs -- Part 2: Safety requirements

ISO 3434:2012

Ships and marine technology -- Heated glass panes for ships' rectangular windows

ISO 898-3:2018

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 3: Flat washers with specified property classes

ISO 6330:2012

Textiles -- Domestic washing and drying procedures for textile testing

ISO 22418:2018

Intelligent transport systems -- Fast service announcement protocol (FSAP)

ISO 11084-1:1993

Graphic technology -- Register systems for photographic materials, foils and paper -- Part 1: Three-pin systems

ISO/IEC 21000-22:2016

Information technology -- Multimedia framework (MPEG-21) -- Part 22: User Description

ISO/TR 16730-4:2013

Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 4: Example of a structural model

ISO/TR 16730-5:2013

Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 5: Example of an Egress model

ISO/TR 16730-3:2013

Fire safety engineering -- Assessment, verification and validation of calculation methods -- Part 3: Example of a CFD model

ISO 7905-1:1995

Plain bearings -- Bearing fatigue -- Part 1: Plain bearings in test rigs and in applications under conditions of hydrodynamic lubrication

ISO 7905-4:1995

Plain bearings -- Bearing fatigue -- Part 4: Tests on half-bearings of a metallic multilayer bearing material

ISO 5123:1984

Documentation -- Headers for microfiche of monographs and serials

ISO 7905-2:1995

Plain bearings -- Bearing fatigue -- Part 2: Test with a cylindrical specimen of a metallic bearing material

ISO 7905-3:1995

Plain bearings -- Bearing fatigue -- Part 3: Test on plain strips of a metallic multilayer bearing material

ISO 6730:2005

Milk -- Enumeration of colony-forming units of psychrotrophic microorganisms -- Colony-count technique at 6,5 degrees C

ISO 11943:2018

Hydraulic fluid power -- Online automatic particle-counting systems for liquids -- Methods of calibration and validation

ISO 12900:2015

Hard coal -- Determination of abrasiveness

ISO 17491-2:2012

Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 2: Determination of resistance to inward leakage of aerosols and gases (inward leakage test)

ISO 18944:2018

Imaging materials -- Reflection colour photographic prints -- Test print construction and measurement

ISO 17491-1:2012

Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 1: Determination of resistance to outward leakage of gases (internal pressure test)

ISO 16204:2012

Durability -- Service life design of concrete structures

ISO 23079:2005

Magnesium and magnesium alloys -- Returns -- Requirements, classification and acceptance

ISO 12315:2010

Aluminium oxide primarily used for production of aluminium -- Method for calculating the Al2O3 content of smelter-grade alumina

ISO 4384-2:2011

Plain bearings -- Hardness testing of bearing metals -- Part 2: Solid materials

ISO 15002:2008

Flow-metering devices for connection to terminal units of medical gas pipeline systems

ISO 20426:2018

Guidelines for health risk assessment and management for non-potable water reuse

ISO 5267-2:2001

Pulps -- Determination of drainability -- Part 2: "Canadian Standard" freeness method

ISO/TS 16785:2014

Electronic Fee Collection (EFC) -- Interface definition between DSRC-OBE and external in-vehicle devices

ISO 9170-2:2008

Terminal units for medical gas pipeline systems -- Part 2: Terminal units for anaesthetic gas scavenging systems

ISO 1083:2018

Spheroidal graphite cast irons -- Classification

ISO 10079-1:2015/Amd 1:2018

Changes to requirements for operating at extremes of temperature

ISO 5458:2018

Geometrical product specifications (GPS) -- Geometrical tolerancing -- Pattern and combined geometrical specification

ISO 12097-2:1996

Road vehicles -- Airbag components -- Part 2: Testing of airbag modules

ISO 9038:2013

Determination of sustained combustibility of liquids

ISO 11127-1:2011

Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 1: Sampling

ISO 11127-2:2011

Preparation of steel substrates before application of paints and related products -- Test methods for non-metallic blast-cleaning abrasives -- Part 2: Determination of particle size distribution