ISO 10047:1993

Textiles -- Determination of surface burning time of fabrics

ISO 10428:1993

Petroleum and natural gas industries -- Sucker rods (pony rods, polished rods, couplings and sub-couplings) -- Specification

ISO/IEC 15961-1:2013

Information technology -- Radio frequency identification (RFID) for item management: Data protocol -- Part 1: Application interface

ISO 15928-5:2013

Houses -- Description of performance -- Part 5: Operating energy

ISO 13773:1997

Rubber -- Polychloroprene latex -- Determination of alkalinity

ISO/IEC 15962:2013

Information technology -- Radio frequency identification (RFID) for item management -- Data protocol: data encoding rules and logical memory functions

ISO 9241-154:2013

Ergonomics of human-system interaction -- Part 154: Interactive voice response (IVR) applications

ISO 1435:1996

Rubber compounding ingredients -- Carbon black (pelletized) -- Determination of fines content

ISO 13774:1998

Rubber and plastics hoses for fuels for internal-combustion engines -- Method of test for flammability

ISO/IEC 23006-5:2013

Information technology -- Multimedia service platform technologies -- Part 5: Service aggregation

ISO 4650:2012

Rubber -- Identification -- Infrared spectrometric methods

ISO 11665-9:2016

Measurement of radioactivity in the environment -- Air: Radon-222 -- Part 9: Test methods for exhalation rate of building materials

ISO 4407:2002

Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the counting method using an optical microscope

ISO 12991:2012

Liquefied natural gas (LNG) -- Tanks for on-board storage as a fuel for automotive vehicles

ISO 17458-5:2013

Road vehicles -- FlexRay communications system -- Part 5: Electrical physical layer conformance test specification

ISO 15184:2012

Paints and varnishes -- Determination of film hardness by pencil test

ISO 17458-1:2013

Road vehicles -- FlexRay communications system -- Part 1: General information and use case definition

ISO 17458-3:2013

Road vehicles -- FlexRay communications system -- Part 3: Data link layer conformance test specification

ISO 17458-2:2013

Road vehicles -- FlexRay communications system -- Part 2: Data link layer specification

ISO 9553:1997

Solar energy -- Methods of testing preformed rubber seals and sealing compounds used in collectors

ISO 3601-4:2008

Fluid power systems -- O-rings -- Part 4: Anti-extrusion rings (back-up rings)

ISO 8733:1997

Parallel pins with internal thread, of unhardened steel and austenitic stainless steel

ISO 10059-1:1992

Dense, shaped refractory products -- Determination of cold compressive strength -- Part 1: Referee test without packing

ISO/IEC 7816-2:2007

Identification cards -- Integrated circuit cards -- Part 2: Cards with contacts -- Dimensions and location of the contacts

ISO 17636-2:2013

Non-destructive testing of welds -- Radiographic testing -- Part 2: X- and gamma-ray techniques with digital detectors

ISO 3634:1979

Vegetable products -- Determination of chloride content

ISO 5738:2004

Milk and milk products -- Determination of copper content -- Photometric method (Reference method)

ISO/TS 10303-1399:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 1399: Application module: Property as definition

ISO 16582:2002

Open end blind rivets with break pull mandrel and protruding head -- Cu/St or Cu/Br or Cu/SSt

ISO 7790:2013

Hydraulic fluid power -- Four-port modular stack valves and four-port directional control valves, sizes 02, 03, 05, 07, 08 and 10 -- Clamping dimensions

ISO 11665-1:2012

Measurement of radioactivity in the environment -- Air: radon-222 -- Part 1: Origins of radon and its short-lived decay products and associated measurement methods

ISO 7270-1:2003

Rubber -- Analysis by pyrolytic gas-chromatographic methods -- Part 1: Identification of polymers (single polymers and polymer blends)

ISO 11665-2:2012

Measurement of radioactivity in the environment -- Air: radon-222 -- Part 2: Integrated measurement method for determining average potential alpha energy concentration of its short-lived decay products

ISO 11665-3:2012

Measurement of radioactivity in the environment -- Air: radon-222 -- Part 3: Spot measurement method of the potential alpha energy concentration of its short-lived decay products

ISO/TS 18683:2015

Guidelines for systems and installations for supply of LNG as fuel to ships

ISO/TS 10303-409:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 409: Application module: AP209 multidisciplinary analysis and design

ISO 10724-2:1998

Plastics -- Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) -- Part 2: Small plates

ISO 6560:1983

Fruit and vegetable products -- Determination of benzoic acid content (benzoic acid contents greater than 200 mg per litre or per kilogram) -- Molecular absorption spectrometric method

ISO 16584:2002

Open end blind rivets with break pull mandrel and protruding head -- NiCu/St or NiCu/SSt

ISO 16585:2002

Closed end blind rivets with pull mandrel and protruding head -- A2/SSt

ISO 14955-2:2018

Machine tools -- Environmental evaluation of machine tools -- Part 2: Methods for measuring energy supplied to machine tools and machine tool components

ISO 20266:2018

Paints and varnishes -- Determination of image clarity (degree of sharpness of reflected or transmitted image)

ISO 15698-2:2012

Steel for the reinforcement of concrete -- Headed bars -- Part 2: Test methods

ISO 11665-4:2012

Measurement of radioactivity in the environment -- Air: radon-222 -- Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis

ISO 6453:1985

Polymeric materials, cellular flexible -- Polyvinylchloride foam sheeting -- Specification

ISO/TS 20177:2018

Vacuum technology -- Vacuum gauges -- Procedures to measure and report outgassing rates

ISO 1726-1:2000

Road vehicles -- Mechanical coupling between tractors and semi-trailers -- Part 1: Interchangeability between tractors and semi-trailers for general cargo

ISO 11665-7:2012

Measurement of radioactivity in the environment -- Air: radon-222 -- Part 7: Accumulation method for estimating surface exhalation rate

ISO 8121:2007

Textile machinery -- Knitting machines -- Nameplate information

ISO 11665-8:2012

Measurement of radioactivity in the environment -- Air: radon-222 -- Part 8: Methodologies for initial and additional investigations in buildings

ISO 8188:2007

Textile machinery and accessories -- Pitches of knitting machines

ISO 11665-5:2012

Measurement of radioactivity in the environment -- Air: radon-222 -- Part 5: Continuous measurement method of the activity concentration

ISO 3471:2008

Earth-moving machinery -- Roll-over protective structures -- Laboratory tests and performance requirements

ISO 11665-6:2012

Measurement of radioactivity in the environment -- Air: radon-222 -- Part 6: Spot measurement method of the activity concentration

ISO 16354:2013

Guidelines for knowledge libraries and object libraries

ISO/TS 16901:2015

Guidance on performing risk assessment in the design of onshore LNG installations including the ship/shore interface

ISO 13472-2:2010

Acoustics -- Measurement of sound absorption properties of road surfaces in situ -- Part 2: Spot method for reflective surfaces

ISO/TS 10303-1674:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 1674: Application module: Functional assignment to part

ISO/TS 10303-1404:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 1404: Application module: Geometric model 2D 3D relationship

ISO 18939:2013

Imaging materials -- Digital hard copy for medical imaging -- Methods of measuring permanence

ISO/TS 21219-4:2015

Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 4: UML to XML conversion rules

ISO 1833-26:2013

Textiles -- Quantitative chemical analysis -- Part 26: Mixtures of melamine and cotton or aramide fibres (method using hot formic acid)

ISO 11315-1:1997

Photography -- Projection in indoor rooms -- Part 1: Screen illumination test for still projectors

ISO/TS 10303-1679:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 1679: Application module: Functional specification

ISO 7625:2012

Sintered metal materials, excluding hardmetals -- Preparation of samples for chemical analysis for determination of carbon content

ISO 11146-2:2005

Lasers and laser-related equipment -- Test methods for laser beam widths, divergence angles and beam propagation ratios -- Part 2: General astigmatic beams

ISO 5647:1990

Paper and board -- Determination of titanium dioxide content

ISO 1920-5:2018

Testing of concrete -- Part 5: Density and water penetration depth

ISO 16031-1:2002

Aerospace fluid systems -- O-rings, inch series: Inside diameters and cross sections, tolerances and size-identification codes -- Part 1: Close tolerances for hydraulic systems

ISO 11146-1:2005

Lasers and laser-related equipment -- Test methods for laser beam widths, divergence angles and beam propagation ratios -- Part 1: Stigmatic and simple astigmatic beams

ISO 9647:1989

Steel and iron -- Determination of vanadium content -- Flame atomic absorption spectrometric method

ISO/IEC 18092:2013

Information technology -- Telecommunications and information exchange between systems -- Near Field Communication -- Interface and Protocol (NFCIP-1)

ISO 16565:2013

Rubber -- Determination of 5-ethylidenenorbornene (ENB) or dicyclopentadiene (DCPD) in ethylene-propylene-diene (EPDM) terpolymers

ISO 14581:2013

Fasteners -- Hexalobular socket countersunk flat head screws

ISO 10407:1993

Petroleum and natural gas industries -- Drilling and production equipment -- Drill stem design and operating limits

ISO 10520:1997

Native starch -- Determination of starch content -- Ewers polarimetric method

ISO 3977-1:1997

Gas turbines -- Procurement -- Part 1: General introduction and definitions

ISO 1920-13:2018

Testing of concrete -- Part 13: Properties of fresh self compacting concrete

ISO 3832:2002

Passenger cars -- Luggage compartments -- Method of measuring reference volume

ISO 15163:2012

Milk and milk products -- Calf rennet and adult bovine rennet -- Determination by chromatography of chymosin and bovine pepsin contents

ISO 6265:2013

Alpine skis -- Determination of deformation load and breaking load

ISO 28921-1:2013

Industrial valves -- Isolating valves for low-temperature applications -- Part 1: Design, manufacturing and production testing

ISO 7583:2013

Anodizing of aluminium and its alloys -- Terms and definitions

ISO 8489-4:1995

Textile machinery and accessories -- Cones for cross winding -- Part 4: Dimensions, tolerances and designation of cones with half angle 4 degrees 20' for winding for dyeing purposes

ISO 8489-3:1995

Textile machinery and accessories -- Cones for cross winding -- Part 3: Dimensions, tolerances and designation of cones with half angle 4 degrees 20'

ISO 8489-2:1995

Textile machinery and accessories -- Cones for cross winding -- Part 2: Dimensions, tolerances and designation of cones with half angle 3 degrees 30'

ISO 498:1992

Natural rubber latex concentrate -- Preparation of dry films

ISO 7378:1983

Fasteners -- Bolts, screws and studs -- Split pin holes and wire holes

ISO 22028-2:2013

Photography and graphic technology -- Extended colour encodings for digital image storage, manipulation and interchange -- Part 2: Reference output medium metric RGB colour image encoding (ROMM RGB)

ISO/TS 10303-1315:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 1315: Application module: Mechanical design presentation representation with draughting

ISO 9917-1:2007

Dentistry -- Water-based cements -- Part 1: Powder/liquid acid-base cements

ISO 11815:2007

Milk -- Determination of total milk-clotting activity of bovine rennets

ISO 8489-5:1995

Textile machinery and accessories -- Cones for cross winding -- Part 5: Dimensions, tolerances and designation of cones with half angle 5 degrees 57'

ISO 17257:2013

Rubber -- Identification of polymers -- Pyrolytic gas-chromatographic method using mass-spectrometric detection

ISO/TS 10303-1708:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 1708: Application module: Packaged connector model

ISO 898-1:2013

Mechanical properties of fasteners made of carbon steel and alloy steel -- Part 1: Bolts, screws and studs with specified property classes -- Coarse thread and fine pitch thread

ISO 8791-4:2007

Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 4: Print-surf method

ISO 17278:2013

Rubber, raw natural -- Determination of the gel content of technically specified rubber (TSR)

ISO 9645:1990

Acoustics -- Measurement of noise emitted by two-wheeled mopeds in motion -- Engineering method

ISO 14557:2002

Fire-fighting hoses -- Rubber and plastics suction hoses and hose assemblies

ISO 506:1992

Rubber latex, natural, concentrate -- Determination of volatile fatty acid number

ISO 1124:1988

Rubber compounding ingredients -- Carbon black shipment sampling procedures

ISO 15372:2000

Ships and marine technology -- Inflatable rescue boats -- Coated fabrics for inflatable chambers

ISO 13559:2002

Butter, fermented milks and fresh cheese -- Enumeration of contaminating microorganisms -- Colony-count technique at 30 degrees C

ISO 11904-1:2002

Acoustics -- Determination of sound immission from sound sources placed close to the ear -- Part 1: Technique using a microphone in a real ear (MIRE technique)

ISO 16750-2:2012

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment -- Part 2: Electrical loads

ISO 10349-11:1992

Photography -- Photographic-grade chemicals -- Test methods -- Part 11: Determination of specific gravity

ISO 10349-10:1992

Photography -- Photographic-grade chemicals -- Test methods -- Part 10: Determination of sulfide content

ISO 7237:1993

Caravans -- Masses and dimensions -- Vocabulary

ISO 1130:1975

Textile fibres -- Some methods of sampling for testing

ISO 13765-4:2004

Refractory mortars -- Part 4: Determination of flexural bonding strength

ISO 13765-3:2004

Refractory mortars -- Part 3: Determination of joint stability

ISO 13082:2011

Milk and milk products -- Determination of the lipase activity of pregastric lipase preparation

ISO 13765-2:2004

Refractory mortars -- Part 2: Determination of consistency using the reciprocating flow table method

ISO 2812-3:2012

Paints and varnishes -- Determination of resistance to liquids -- Part 3: Method using an absorbent medium

ISO 16851:2012

Textile conveyor belts -- Determination of the net length of an endless (spliced) conveyor belt

ISO 10843:1997

Acoustics -- Methods for the description and physical measurement of single impulses or series of impulses

ISO 15147:2012

Light conveyor belts -- Tolerances on widths and lengths of cut light conveyor belts

ISO 14890:2013

Conveyor belts -- Specification for rubber- or plastics-covered conveyor belts of textile construction for general use

ISO 6734:2010

Sweetened condensed milk -- Determination of total solids content (Reference method)

ISO 15609-6:2013

Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 6: Laser-arc hybrid welding

ISO 3095:2013

Acoustics -- Railway applications -- Measurement of noise emitted by railbound vehicles

ISO 10349-5:1992

Photography -- Photographic-grade chemicals -- Test methods -- Part 5: Determination of heavy metals and iron content

ISO 5419:1982

Twist drills -- Terms, definitions and types

ISO 284:2012

Conveyor belts -- Electrical conductivity -- Specification and test method

ISO 8196-1:2009

Milk -- Definition and evaluation of the overall accuracy of alternative methods of milk analysis -- Part 1: Analytical attributes of alternative methods

ISO 10349-3:1992

Photography -- Photographic-grade chemicals -- Test methods -- Part 3: Determination of matter insoluble in ammonium hydroxide solution

ISO 4195:2012

Conveyor belts with heat-resistant rubber covers -- Heat resistance of covers -- Requirements and test methods

ISO 3535:1977

Forms design sheet and layout chart

ISO 8196-2:2009

Milk -- Definition and evaluation of the overall accuracy of alternative methods of milk analysis -- Part 2: Calibration and quality control in the dairy laboratory

ISO 18573:2012

Conveyor belts -- Test atmospheres and conditioning periods

ISO 251:2012

Conveyor belts with textile carcass -- Widths and lengths

ISO 6731:2010

Milk, cream and evaporated milk -- Determination of total solids content (Reference method)

ISO 13473-2:2002

Characterization of pavement texture by use of surface profiles -- Part 2: Terminology and basic requirements related to pavement texture profile analysis

ISO/TS 10303-1642:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1642: Application module: Assembly module usage view

ISO/TS 10303-1650:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1650: Application module: Bare die

ISO 1999:2013

Acoustics -- Estimation of noise-induced hearing loss

ISO/IEC 17343:2007

Information technology -- Telecommunications and information exchange between systems -- Corporate telecommunication networks -- Signalling interworking between QSIG and SIP -- Basic services

ISO/TS 10303-1706:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1706: Application module: Non feature shape element

ISO 14892:2002

Dried skimmed milk -- Determination of vitamin D content using high-performance liquid chromatography

ISO/TS 10303-1707:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1707: Application module: Package

ISO/TS 10303-1686:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1686: Application module: Interconnect module usage view

ISO/TS 10303-1698:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1698: Application module: Layered interconnect module design

ISO/TS 10303-1718:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1718: Application module: Layered interconnect simple template

ISO 6450:2005

Rubber- or plastics-coated fabrics -- Determination of resistance to liquids

ISO 6940:2004

Textile fabrics -- Burning behaviour -- Determination of ease of ignition of vertically oriented specimens

ISO 14891:2002

Milk and milk products -- Determination of nitrogen content -- Routine method using combustion according to the Dumas principle

ISO 8013:2012

Rubber, vulcanized -- Determination of creep in compression or shear

ISO 10303-215:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 215: Application protocol: Ship arrangement

ISO 4143:1981

Shipbuilding -- Inland vessels -- Open rowing lifeboats

ISO 5089:1977

Textiles -- Preparation of laboratory test samples and test specimens for chemical testing

ISO 12301:2007

Plain bearings -- Quality control techniques and inspection of geometrical and material quality characteristics

ISO 21182:2013

Light conveyor belts -- Determination of the coefficient of friction

ISO 6108:1978

Double equal angle cutters with plain bore and key drive

ISO 21181:2013

Light conveyor belts -- Determination of the relaxed elastic modulus

ISO 21180:2013

Light conveyor belts -- Determination of the maximum tensile strength

ISO 21179:2013

Light conveyor belts -- Determination of the electrostatic field generated by a running light conveyor belt

ISO 5470-2:2003

Rubber- or plastics-coated fabrics -- Determination of abrasion resistance -- Part 2: Martindale abrader

ISO 21178:2013

Light conveyor belts -- Determination of electrical resistances

ISO/TS 10303-1803:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1803: Application module: Process plan

ISO 9614-2:1996

Acoustics -- Determination of sound power levels of noise sources using sound intensity -- Part 2: Measurement by scanning

ISO 3552-2:1992

Rotary core diamond drilling equipment -- System B -- Part 2: Inch units