ISO 1385-1:1977

Phthalate esters for industrial use -- Methods of test -- Part 1: General

ISO 23146:2012

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test methods for fracture toughness of monolithic ceramics -- Single-edge V-notch beam (SEVNB) method

ISO/TS 10303-1373:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1373: Application module: Analysis product relationships

ISO 18738-2:2012

Measurement of ride quality -- Part 2: Escalators and moving walks

ISO/TS 10303-1374:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1374: Application module: Analysis shape

ISO 25745-1:2012

Energy performance of lifts, escalators and moving walks -- Part 1: Energy measurement and verification

ISO/TS 10303-1375:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1375: Application module: Cfd conditions

ISO 20323:2018

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure -- Determination of tensile properties of tubes

ISO/TS 10303-1376:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1376: Application module: Cfd equations

ISO/TS 10303-1377:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1377: Application module: Cfd model

ISO 1388-8:1981

Ethanol for industrial use -- Methods of test -- Part 8: Determination of methanol content (methanol contents between 0,10 and 1,50 % (V/V)) -- Visual colorimetric method

ISO 12297-2:2018

Rolling bearings -- Cylindrical rollers -- Part 2: Boundary dimensions, geometrical product specifications (GPS) and tolerance values for ceramic rollers

ISO/IEC 29121:2018

Information technology -- Digitally recorded media for information interchange and storage -- Data migration method for optical disks for long-term data storage

ISO 9276-4:2001

Representation of results of particle size analysis -- Part 4: Characterization of a classification process

ISO 29481-2:2012

Building information models -- Information delivery manual -- Part 2: Interaction framework

ISO 14573:2002

Snowboard strap bindings for soft boots -- Requirements and test methods

ISO 1388-6:1981

Ethanol for industrial use -- Methods of test -- Part 6: Test for miscibility with water

ISO 1388-7:1981

Ethanol for industrial use -- Methods of test -- Part 7: Determination of methanol content (methanol contents between 0,01 and 0,20 % (V/V)) -- Photometric method

ISO 12884:2000

Ambient air -- Determination of total (gas and particle-phase) polycyclic aromatic hydrocarbons -- Collection on sorbent-backed filters with gas chromatographic/mass spectrometric analyses

ISO 20567-3:2012

Paints and varnishes -- Determination of stone-chip resistance of coatings -- Part 3: Single-impact test with a free-flying impact body

ISO 1388-1:1981

Ethanol for industrial use -- Methods of test -- Part 1: General

ISO 1388-2:1981

Ethanol for industrial use -- Methods of test -- Part 2: Detection of alkalinity or determination of acidity to phenolphthalein

ISO 1388-3:1981

Ethanol for industrial use -- Methods of test -- Part 3: Estimation of content of carbonyl compounds present in small amounts -- Photometric method

ISO 1388-4:1981

Ethanol for industrial use -- Methods of test -- Part 4: Estimation of content of carbonyl compounds present in moderate amounts -- Titrimetric method

ISO 1388-5:1981

Ethanol for industrial use -- Methods of test -- Part 5: Determination of aldehydes content -- Visual colorimetric method

ISO/TS 10303-1372:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1372: Application module: Analysis

ISO 10312:1995

Ambient air -- Determination of asbestos fibres -- Direct transfer transmission electron microscopy method

ISO 10303-236:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 236: Application protocol: Furniture catalog and interior design

ISO 10522:1993

Agricultural irrigation equipment -- Direct-acting pressure-regulating valves

ISO 15711:2003

Paints and varnishes -- Determination of resistance to cathodicdisbonding of coatings exposed to sea water

ISO 21216:2012

Intelligent transport systems -- Communication access for land mobiles (CALM) -- Millimetre wave air interface

ISO 15710:2002

Paints and varnishes -- Corrosion testing by alternate immersion in and removal from a buffered sodium chloride solution

ISO 1388-9:1981

Ethanol for industrial use -- Methods of test -- Part 9: Determination of esters content -- Titrimetric method after saponification

ISO 1388-10:1981

Ethanol for industrial use -- Methods of test -- Part 10: Estimation of hydrocarbons content -- Distillation method

ISO 1388-11:1981

Ethanol for industrial use -- Methods of test -- Part 11: Test for detection of furfural

ISO 1388-12:1981

Ethanol for industrial use -- Methods of test -- Part 12: Determination of permanganate time

ISO/TS 18667:2018

Space systems -- Capability-based Safety, Dependability, and Quality Assurance (SD&QA) programme management

ISO 15609-1:2004

Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 1: Arc welding

ISO/IEC 19784-1:2018

Information technology -- Biometric application programming interface -- Part 1: BioAPI specification

ISO 7255:1985

Shipbuilding -- Active control units of ships -- Vocabulary

ISO 13129:2012

Paints and varnishes -- Electrochemical measurement of the protection provided to steel by paint coatings -- Current interrupter (CI) technique, relaxation voltammetry (RV) technique and DC transient (DCT) measurements

ISO/TS 18234-11:2013

Intelligent transport systems -- Traffic and Travel Information (TTI) via transport protocol experts group, generation 1 (TPEG1) binary data format -- Part 11: Location Referencing Container (TPEG1-LRC)

ISO 6374:1981

Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of phosphorus content -- Atomic absorption spectrometric method after extraction

ISO 9648:1988

Sorghum -- Determination of tannin content

ISO/IEC 15417:2007

Information technology -- Automatic identification and data capture techniques -- Code 128 bar code symbology specification

ISO 17387:2008

Intelligent transport systems -- Lane change decision aid systems (LCDAS) -- Performance requirements and test procedures

ISO 5068-1:2007

Brown coals and lignites -- Determination of moisture content -- Part 1: Indirect gravimetric method for total moisture

ISO 5530-1:2013

Wheat flour -- Physical characteristics of doughs -- Part 1: Determination of water absorption and rheological properties using a farinograph

ISO 6162-1:2012

Hydraulic fluid power -- Flange connections with split or one-piece flange clamps and metric or inch screws -- Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127

ISO 1237:1981

Mustard seed -- Specification

ISO 8658:1997

Carbonaceous materials for use in the production of aluminium -- Green and calcined coke -- Determination of trace elements by flame atomic absorption spectrometry

ISO 1952:2008

Solid mineral fuels -- Determination of extractable metals in dilute hydrochloric acid

ISO/IEC 30134-3:2016/Amd 1:2018

ISO 20902-1:2018

Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries -- Part 1: General requirements

ISO 16714:2008

Earth-moving machinery -- Recyclability and recoverability -- Terminology and calculation method

ISO 8758:1992

Cinematography -- Photographic control and data records on 16 mm and 35 mm motion-picture film and prints -- Dimensions and location

ISO 501:2012

Hard coal -- Determination of the crucible swelling number

ISO 9652-4:2000

Masonry -- Part 4: Test methods

ISO 15531-1:2004

Industrial automation systems and integration -- Industrial manufacturing management data -- Part 1: General overview

ISO/TS 17822-1:2014

In vitro diagnostic test systems -- Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens -- Part 1: General requirements, terms and definitions

ISO 17263:2012

Intelligent transport systems -- Automatic vehicle and equipment identification -- System parameters

ISO/TS 10303-27:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 27: Implementation methods: Java TM programming language binding to the standard data access interface with Internet/Intranet extensions

ISO 5950:2012

Electrolytic tin-coated cold-reduced carbon steel sheet of commercial and drawing qualities

ISO 17262:2012

Intelligent transport systems -- Automatic vehicle and equipment identification -- Numbering and data structures

ISO 6316:2012

Hot-rolled steel strip of structural quality

ISO/IEC 29173-1:2012

Information technology -- Mobile item identification and management -- Part 1: Mobile RFID interrogator device protocol for ISO/IEC 18000-63 Type C

ISO 10303-233:2012

Industrial automation systems and integration -- Product data representation and exchange -- Part 233: Application protocol: Systems engineering

ISO 21849:2006

Aircraft and space -- Industrial data -- Product identification and traceability

ISO 13794:1999

Ambient air -- Determination of asbestos fibres -- Indirect-transfer transmission electron microscopy method

IEC 80601-2-30:2018

Medical electrical equipment -- Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers

ISO 17491-4:2008

Protective clothing -- Test methods for clothing providing protection against chemicals -- Part 4: Determination of resistance to penetration by a spray of liquid (spray test)

ISO/TS 17536-3:2014

Road vehicles -- Aerosol separator performance test for internal combustion engines -- Part 3: Method to perform engine gravimetric test

ISO 13331:1995

Road vehicles -- Filler pipes and openings of motor vehicle fuel tanks -- Vapour recovery system

ISO 10303-212:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 212: Application protocol: Electrotechnical design and installation

ISO 10341:2012

Ophthalmic instruments -- Refractor heads

ISO 15189:2012

Medical laboratories -- Requirements for quality and competence

ISO Guide 78:2012

Safety of machinery -- Rules for drafting and presentation of safety standards

ISO 5789:1979

Fluorinated hydrocarbons for industrial use -- Determination of non-volatile residue

ISO 8310:2012

Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels -- General requirements for automatic tank thermometers on board marine carriers and floating storage

ISO 5674:2004

Tractors and machinery for agriculture and forestry -- Guards for power take-off (PTO) drive-shafts -- Strength and wear tests and acceptance criteria

ISO 5530-2:2012

Wheat flour -- Physical characteristics of doughs -- Part 2: Determination of rheological properties using an extensograph

ISO 10619-2:2017

Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 2: Bending tests at sub-ambient temperatures

ISO 9852:2007

Unplasticized poly(vinyl chloride) (PVC-U) pipes -- Dichloromethane resistance at specified temperature (DCMT) -- Test method

ISO 8625-2:2018

Aerospace -- Fluid systems -- Vocabulary -- Part 2: General terms and definitions relating to flow

ISO 7382:1986

Ethylene for industrial use -- Sampling in the liquid and the gaseous phase

ISO 20819:2018

Plastics -- Wood-plastic recycled composites (WPRC) -- Specification

ISO 21283:2018

Iron ores -- Determination of specific surface area -- Test method using air-permeability apparatus (Blaine)

ISO 12214:2018

Road vehicles -- Direction-of-motion stereotypes for automotive hand controls

ISO 19453-5:2018

Road vehicles -- Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles -- Part 5: Chemical loads

ISO 9687:2015/Amd 1:2018

ISO 8625-3:2018

Aerospace -- Fluid systems -- Vocabulary -- Part 3: General terms and definitions relating to temperature

ISO 9080:2012

Plastics piping and ducting systems -- Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

ISO 13584-102:2006

Industrial automation systems and integration -- Parts library -- Part 102: View exchange protocol by ISO 10303 conforming specification

ISO 13968:2008

Plastics piping and ducting systems -- Thermoplastics pipes -- Determination of ring flexibility

ISO/TS 18234-1:2013

Intelligent transport systems -- Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format -- Part 1: Introduction, numbering and versions (TPEG1-INV)

ISO 4164:2012

Mopeds -- Engine test code -- Net power

ISO/TS 21219-2:2014

Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 2: UML modelling rules

ISO 3059:2012

Non-destructive testing -- Penetrant testing and magnetic particle testing -- Viewing conditions

ISO 10303-104:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 104: Integrated application resource: Finite element analysis

ISO 13584-26:2000

Industrial automation systems and integration -- Parts library -- Part 26: Logical resource: Information supplier identification

ISO 6538:1997

Cassia, Chinese type, Indonesian type and Vietnamese type [Cinnamomumaromaticum (Nees) syn. Cinnamomum cassia (Nees) ex Blume, Cinnamomumburmanii (C.G. Nees) Blume and CinnamomumloureiriiNees] -- Specification

ISO 1189:1986

Cinematography -- Recorded characteristic for magnetic sound records on 35 mm motion-picture film excluding striped release prints -- Specifications

ISO 15528:2013

Paints, varnishes and raw materials for paints and varnishes -- Sampling

ISO 5524:1991

Tomatoes -- Guide to cold storage and refrigerated transport

ISO 11178:1995

Star anise (Illiciumverum Hook. f.) -- Specification

ISO 3053:2004

Oil of grapefruit (Citrus x paradisiMacfad.), obtained by expression

ISO/IEC 14476-1:2002

Information technology -- Enhanced communications transport protocol: Specification of simplex multicast transport

ISO 9117-6:2012

Paints and varnishes -- Drying tests -- Part 6: Print-free test

ISO 3539:1975

Road vehicles -- Injection nozzle holder with body, types 8 and 10, and injection nozzle holder with fixing flats, types 9 and 11

ISO 4719:2012

Essential oil of spike lavender (LavandulalatifoliaMedikus), Spanish type

ISO 4120:2004

Sensory analysis -- Methodology -- Triangle test

ISO 7358:2002

Oils of bergamot, lemon, citron and lime, fully or partially reduced in bergapten -- Determination of bergapten content by high-pressure liquid chromatography (HPLC)

ISO 8586:2012

Sensory analysis -- General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors

ISO 4481:1977

Cutlery and flatware -- Nomenclature

ISO 2080:2008

Metallic and other inorganic coatings -- Surface treatment, metallic and other inorganic coatings -- Vocabulary

ISO 5079:1995

Textile fibres -- Determination of breaking force and elongation at break of individual fibres

ISO 8563:1987

Propylene and butadiene for industrial use -- Sampling in the liquid phase

ISO 8614:1997

Ski bindings -- Vocabulary

ISO 20871:2018

Footwear -- Test methods for outsoles -- Abrasion resistance

ISO 7078:1985

Building construction -- Procedures for setting out, measurement and surveying -- Vocabulary and guidance notes

ISO/TS 10303-1142:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1142: Application module: Requirement view definition relationship

ISO/TS 10303-1603:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1603: Application module: Analytical model

ISO 3523:2002

Oil of cananga (Canangaodorata (Lam.) Hook. f. et Thomson, forma macrophylla)

ISO 20872:2018

Footwear -- Test methods for outsoles -- Tear strength

ISO 3475:2002

Oil of aniseed (Pimpinellaanisum L.)

ISO 3518:2002

Oil of sandalwood (Santalum album L.)

ISO 3757:2002

Oil of patchouli (Pogostemoncablin (Blanco) Benth.)

ISO 16145-3:2012

Ships and marine technology -- Protective coatings and inspection method -- Part 3: Cargo oil tanks of crude oil tankers

ISO 5931:2000

Carbonaceous materials used in the production of aluminium -- Calcined coke and calcined carbon products -- Determination of total sulfur by the Eschka method

ISO 4718:2004

Oil of lemongrass [Cymbopogonflexuosus (Nees ex Steudel) J.F. Watson]

ISO 4724:2004

Oil of cedarwood, Virginian (Juniperusvirginiana L.)

ISO 16145-1:2012

Ships and marine technology -- Protective coatings and inspection method -- Part 1: Dedicated sea water ballast tanks

ISO/TS 10303-1512:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1512: Application module: Faceted boundary representation

ISO 10384:2012

Hot-rolled carbon steel sheet as defined by chemical composition

ISO 8502-5:1998

Preparation of steel substrates before application of paints and related products -- Tests for the assessment of surface cleanliness -- Part 5: Measurement of chloride on steel surfaces prepared for painting (ion detection tube method)

ISO/IEEE 11073-10421:2012

Health informatics -- Personal health device communication -- Part 10421: Device specialization -- Peak expiratory flow monitor (peak flow)

ISO/IEEE 11073-10420:2012

Health informatics -- Personal health device communication -- Part 10420: Device specialization -- Body composition analyzer

ISO 3548-3:2012

Plain bearings -- Thin-walled half bearings with or without flange -- Part 3: Measurement of peripheral length

ISO 18077:2018

Reload startup physics tests for pressurized water reactors

ISO 18075:2018

Steady-state neutronics methods for power-reactor analysis

ISO 20873:2018

Footwear -- Test methods for outsoles -- Dimensional stability

ISO 20874:2018

Footwear -- Test methods for outsoles -- Needle tear strength

ISO/TS 21219-21:2018

Intelligent transport systems -- Traffic and travel information via transport protocol experts group, generation 2 (TPEG2) -- Part 21: Geographic location referencing (TPEG-GLR)

ISO 20875:2018

Footwear -- Test methods for outsoles -- Determination of split tear strength and delamination resistance

ISO 20866:2018

Footwear -- Test methods for insoles -- Delamination resistance

ISO 20867:2018

Footwear -- Test methods for insoles -- Heel pin holding strength

IEC 80601-2-49:2018

Medical electrical equipment -- Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment

ISO 20876:2018

Footwear -- Test methods for insoles -- Resistance to stitch tear

ISO 22650:2018

Footwear -- Test methods for whole shoe -- Heel attachment

ISO 18896:2018

Footwear -- Test methods for shanks -- Longitudinal stiffness

ISO 13898-2:1997

Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 2: Determination of nickel content

ISO 13898-4:1997

Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 4: Determination of cobalt content