Natural gas --
Determination of composition and associated uncertainty
by gas chromatography -- Part 3: Precision and bias
Thermal insulation --
Moisture effects on heat transfer -- Determination of thermal transmissivity of
a moist material
Soil quality -- Sampling -- Part 205: Guidance on the procedure for investigation of natural, near-natural and cultivated sites
Sulphur for industrial use -- Determination of arsenic content -- Silver diethyldithiocarbamate photometric method
Steel -- Determination of high cobalt content -- Potentiometric titration method after separation by ion exchange
Microbeam analysis -- Analytical electron microscopy -- Vocabulary
Road vehicles -- Tachograph systems -- Part 3: Motion sensor interface
Metallic coatings -- Measurement of coating thickness -- Profilometric method
Non-destructive testing -- Radiographic testing of metallic materials using film and X- or gamma rays -- Basic rules
Road vehicles -- FlexRay communications system -- Part 5: Electrical physical layer conformance test specification
Road vehicles -- FlexRay communications system -- Part 4: Electrical physical layer specification
Road vehicles -- FlexRay communications system -- Part 1: General information and use case definition
Information technology -- User interface component accessibility -- Part 21: Guidance on audio descriptions
Road vehicles -- FlexRay communications system -- Part 3: Data link layer conformance test specification
Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method
Road vehicles -- FlexRay communications system -- Part 2: Data link layer specification
Measurement of radioactivity in the environment -- Air: radon-222 -- Part 12: Determination of the diffusion coefficient in waterproof materials: membrane one-side activity concentration measurement method
Dentistry -- Root canal instruments -- Part 4: Auxiliary instruments
Water quality -- Determination of adsorbable organically bound halogens (AOX)
Information technology -- Security techniques -- Lightweight cryptography -- Part 4: Mechanisms using asymmetric techniques
Information technology -- Programming languages -- M Windowing API
Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 1: Immersion test method
Petroleum, petrochemical and natural gas industries -- Production assurance and reliability management
Water quality -- Determination of dissolved sulfide -- Photometric method using methylene blue
Rolling bearings -- Ceramic bearing balls -- Determination of strength by notched ball test
Corrugated fibreboard -- Determination of edgewise crush resistance -- Waxed edge method
Gaseous hydrogen -- Land vehicle fuel containers
Plastics piping systems -- Mechanical fittings for pressure piping systems -- Specifications
Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 1: General principles, acceptance conditions
Specification and qualification of welding procedures for metallic materials -- Qualification based on pre-production welding test
Water quality -- Enumeration of Clostridium perfringens -- Method using membrane filtration
Space systems -- Measurements of thermo-optical properties of thermal control materials
Acceptance conditions for gear hobbing machines -- Testing of the accuracy
Oilseed residues -- Determination of ash insoluble in hydrochloric acid
Reaction-to-fire tests for façades -- Part 1: Intermediate-scale test
Information technology -- ECMAScript for XML (E4X) specification
Jewellery -- Sampling of precious metal alloys for and in jewellery and associated products
Consumer product safety -- Guidelines for suppliers
Agricultural and forestry tractors -- Roll-over protective structures on narrow-track wheeled tractors -- Part 1: Front-mounted ROPS
Textiles -- Man-made fibres -- Generic names
Road vehicles -- Open Test sequence eXchange format (OTX) -- Part 3: Standard extensions and requirements
Heat-treatable steels, alloy steels and free-cutting steels -- Part 15: Valve steels for internal combustion engines
Aerospace fluid systems -- O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes -- Part 2: Standard tolerances for non-hydraulic systems
Textiles -- Tests for colour fastness -- Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics
Cork stoppers -- Determination of global migration
Textiles -- Tests for colour fastness -- Part A05: Instrumental assessment of change in colour for determination of grey scale rating
Water quality -- Determination of suspended solids by filtration through glass-fibre filters
Water quality -- Determination of dissolved anions by liquid chromatography of ions -- Part 3: Determination of chromate, iodide, sulfite, thiocyanate and thiosulfate
Welding -- Micro joining of 2nd generation high temperature superconductors -- Part 2: Qualification for welding and testing personnel
Security and resilience -- Vocabulary
Graphic technology -- Vocabulary -- Part 1: Fundamental terms
Health informatics -- Categorial structures for representation of acupuncture -- Part 2: Needling
Trade data interchange -- Trade data elements directory
Paper and board -- Determination of air permeance (medium range) -- Part 5: Gurley method
Cutter arbors with parallel key and tenon drive -- Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer
Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer
Cutter arbors with parallel key and tenon drive -- Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface
Paper and board -- Determination of air permeance (medium range) -- Part 4: Sheffield method
Cutter arbors with parallel key and tenon drive -- Part 1: General dimensions
Tools for pressing -- Guide bushes -- Part 6: Form E, gliding bushes, flanged, type 1
Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1
Tools for pressing -- Guide bushes -- Part 4: Form C, gliding bushes, headed, type 1
Gas cylinders -- Parallel threads for connection of valves to gas cylinders -- Part 1: Specification
Aircraft -- Pressure refuelling connections
Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device
Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution
Fibre ropes -- Electrostatic surface potential measuring method
Water quality -- Determination of selected plant treatment agents -- Method using high performance liquid chromatography with UV detection after solid-liquid extraction
Heating systems in buildings -- Method and design for calculation of the system energy performance -- Combustion systems (boilers)
Tools for pressing -- Guide pillars -- Part 1: Types
Paper and board -- Determination of curl using a single vertically suspended test piece
Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-of-flight mass analysers
Tools for pressing -- Guide bushes -- Part 9: Form B, ball cage bushes, plain, type 2
Nickel alloys -- Determination of Nickel content -- Inductively coupled plasma atomic emission spectrometric method
Tools for pressing -- Guide bushes -- Part 8: Form G, gliding bushes, stepped, type 1
Sensory analysis -- Vocabulary
Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U, Pu) O2
Road vehicles -- Tachograph systems -- Part 4: CAN interface
Tools for pressing -- Guide pillars -- Part 5: Type D, end-locking pillars with flange
Tools for pressing -- Guide pillars -- Part 4: Type C, pillars with taper lead and bush
Tools for pressing -- Guide pillars -- Part 3: Type B, end-locking pillars
Water quality -- Lead-210 -- Test method using liquid scintillation counting
Preferred numbers -- Series of preferred numbers
Technical product documentation -- Springs -- Part 1: Simplified representation
Plastics -- Test specimens
Aerospace -- Fluid systems -- Metal hose assemblies
Water quality -- Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction
Timber structures -- Bond performance of adhesives -- Part 1: Basic requirements
Liquefied petroleum gases -- Calculation method for density and vapour pressure
Radiation protection -- Clothing for protection against radioactive contamination -- Design, selection, testing and use
Soil quality -- Digestion of nitric acid soluble fractions of elements
Metallic and other inorganic coatings -- Definitions and conventions concerning the measurement of thickness
Railway applications -- Calculation of braking performance (stopping, slowing and stationary braking) -- Part 1: General algorithms utilizing mean value calculation
Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers
Statistical interpretation of data -- Part 8: Determination of prediction intervals
Paper and board -- Automated on-line testing -- Metrological comparability between standardized measurements and output of on-line gauges
Space systems -- Safety and compatibility of materials - Method to determine the flammability thresholds of materials
Geometrical Product Specifications (GPS) -- Surface texture: Profile method; Measurement standards -- Part 1: Material measures
Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation processing
Water quality -- Determination of toxicity of fresh water sediments using Hyalellaazteca
Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 2: UML modelling rules
Moulded plastics footwear -- Lined or unlined poly(vinyl chloride) boots for general industrial use -- Specification
Oilseeds, vegetable oils and fats -- Nomenclature
Industrial automation systems and integration -- Product data representation and exchange -- Part 109: Integrated application resource: Kinematic and geometric constraints for assembly models
Systems and software engineering -- Information technology project performance benchmarking framework -- Part 2: Requirements for benchmarking
Water quality -- Determination of nitrogen -- Part 1: Method using oxidative digestion with peroxodisulfate
Microbeam analysis -- Methods of specimen preparation for analysis of general powders using WDS and EDS
Nuclear energy -- Soxhlet-mode chemical durability test -- Application to vitrified matrixes for high-level radioactive waste
Reaction-to-fire tests -- Guidance on the choice of substrates for building and transport products
Thermal insulation -- Determination of steady-state thermal transmission properties of thermal insulation for circular pipes
Road vehicles -- Trailers up to 3,5 t -- Requirements for jockey wheels and drawbar supports
Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 1: General test requirements
Cutlery and flatware -- Nomenclature
Moulded plastics footwear -- Lined or unlined polyurethane boots for general industrial use -- Specification
Hydrometry -- Selection, establishment and operation of a gauging station
Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 4: Mounting and operating conditions for special appliances
Machinery for forestry -- Portable brush-cutters and grass-trimmers -- Vocabulary
Intelligent transport systems -- Fast service announcement protocol (FSAP)
Plastics -- Vinyl chloride homopolymers and copolymers -- Determination of chlorine content
Soil quality -- Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution -- Part 2: Automated method with segmented flow analysis
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 9: CMMs with multiple probing systems
Geometrical product specifications (GPS) -- Acceptance and reverification tests for coordinate measuring systems (CMS) -- Part 8: CMMs with optical distance sensors
Decontamination of radioactively contaminated surfaces -- Testing of decontamination agents for textiles
Smart community infrastructures -- Principles and requirements for performance metrics
Geographic information -- Imagery, gridded and coverage data framework
Sodium hydrogen carbonate for industrial use -- List of methods of test and preparation of the test sample
Aromatic natural raw materials -- Vocabulary
Steel tubes and fittings -- Symbols for use in specifications -- Part 2: Square and rectangular hollow sections
Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 2: Preparation grades of previously coated steel substrates after localized removal of previous coatings
Information technology -- Multimedia application format (MPEG-A) -- Part 7: Open access application format
Wheelchair seating -- Part 1: Vocabulary, reference axis convention and measures for body segments, posture and postural support surfaces
Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 2: Test methods
Water quality -- Determination of dissolved anions by liquid chromatography of ions -- Part 4: Determination of chlorate, chloride and chlorite in water with low contamination
Horology -- Divers' watches
Road vehicles -- Interchange of digital information on electrical connections between towing and towed vehicles -- Part 3: Application layer for equipment other than brakes and running gear
Plastics pipes and fittings -- Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels -- Metric series -- Specifications -- Part 1: Pipes
Thermoplastics pipes for the conveyance of fluids -- Nominal outside diameters and nominal pressures -- Part 2: Inch-based series
Cinematography -- Picture areas for motion-picture films for television -- Position and dimensions
Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 1: Requirements
Plain bearings -- Copper alloy bushes
Information technology -- Multimedia application format (MPEG-A) -- Part 9: Digital Multimedia Broadcasting application format
Paints and varnishes -- Methods of exposure to laboratory light sources -- Part 2: Xenon-arc lamps
Remote-handling devices for radioactive materials -- Part 2: Mechanical master-slave manipulators
Aerospace -- Fluid systems -- Interface of 24 degree cone metric couplings
Paints and varnishes -- Methods of exposure to laboratory light sources -- Part 4: Open-flame carbon-arc lamps
Measurement uncertainty for metrological applications -- Repeated measurements and nested experiments
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Light source for testing semiconducting photocatalytic materials used under indoor lighting environment
Fishing nets -- Method of test for the determination of mesh size -- Part 2: Length of mesh
Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes, fittings and compounds
Water quality -- Evaluation of the aerobic biodegradability of organic compounds at low concentrations -- Part 1: Shake-flask batch test with surface water or surface water/sediment suspensions
Graphical symbols -- Creation and design of public information symbols -- Requirements
Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Inter-exchange signalling protocol -- Wireless Terminal Location Registration supplementary service and Wireless Terminal Information exchange additional network feature
Metric series wires for measuring screw threads
Sulphuric acid and oleum for industrial use -- Determination of total acidity, and calculation of free sulphur trioxide content of oleum -- Titrimetric method
Building construction -- Modular coordination -- Modular floor plane for vertical dimensions
Implants for surgery -- Calcium phosphates -- Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes
Water quality -- Determination of ammonium nitrogen -- Method by flow analysis (CFA and FIA) and spectrometric detection
Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Part 1X: Port-based network access control
Wool -- Measurement of the length of fibres processed on the worsted system, using a fibre diagram machine
Wool -- Determination of fibre length (barbe and hauteur) using a comb sorter
Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Part 1AE: Media access control (MAC) security
Aerospace -- Couplings, threaded and sealed, for fluid systems -- Dimensions
Road vehicles -- Anchorages in vehicles and attachments to anchorages for child restraint systems -- Part 3: Classification of child restraint system and space in vehicle
Machinery for forestry -- Wheeled special machines -- Vocabulary, performance test methods and criteria for brake systems
Ships and marine technology -- Standard data for shipboard machinery and equipment
Test conditions for internal cylindrical grinding machines with horizontal spindle -- Testing of accuracy
Previous page
Back to top
