International Organization for Standards published November 2018 (Part 1)
-   +   A-   A+     02/11/2018

ISO 6974-3:2018
Natural gas -- Determination of composition and associated uncertainty by gas chromatography -- Part 3: Precision and bias
ISO/IEC TS 19217:2015
Information technology -- Programming languages -- C++ Extensions for concepts
ISO 10051:1996
Thermal insulation -- Moisture effects on heat transfer -- Determination of thermal transmissivity of a moist material

ISO 16000-36:2018

Indoor air -- Part 36: Standard method for assessing the reduction rate of culturable airborne bacteria by air purifiers using a test chamber

ISO 18400-205:2018

Soil quality -- Sampling -- Part 205: Guidance on the procedure for investigation of natural, near-natural and cultivated sites

ISO 3705:1976

Sulphur for industrial use -- Determination of arsenic content -- Silver diethyldithiocarbamate photometric method

ISO 15686-8:2008

Buildings and constructed assets -- Service-life planning -- Part 8: Reference service life and service-life estimation

ISO 11653:1997

Steel -- Determination of high cobalt content -- Potentiometric titration method after separation by ion exchange

ISO 15932:2013

Microbeam analysis -- Analytical electron microscopy -- Vocabulary

ISO 10914:1996

Assembly tools for screws and nuts -- Sockets and wrenches for spline drive

ISO 4518:1980

Metallic coatings -- Measurement of coating thickness -- Profilometric method

ISO 4519:1980

Electrodeposited metallic coatings and related finishes -- Sampling procedures for inspection by attributes

ISO 9657:2004

Pliers and nippers for electronics -- General technical requirements

ISO 9656:2004

Pliers and nippers for electronics -- Test methods

ISO 5579:2013

Non-destructive testing -- Radiographic testing of metallic materials using film and X- or gamma rays -- Basic rules

ISO 729:1988

Oilseeds -- Determination of acidity of oils

ISO 8199:2018

Water quality -- General requirements and guidance for microbiological examinations by culture

ISO 21832:2018

Workplace air -- Metals and metalloids in airborne particles -- Requirements for evaluation of measuring procedure

ISO 11901-2:2018

Tools for pressing -- Gas springs -- Part 2: Specification of accessories

ISO 3630-4:2009

Dentistry -- Root canal instruments -- Part 4: Auxiliary instruments

ISO 22915-20:2008

Industrial trucks -- Verification of stability -- Part 20: Additional stability test for trucks operating in the special condition of offset load, offset by utilization

ISO 10303-57:2018

Industrial automation systems and integration -- Product data representation and exchange -- Part 57: Integrated generic resource: Persistent identification of elements in procedural shape modelling

ISO 6099:2018

Fluid power systems and components -- Cylinders -- Identification code for mounting dimensions and mounting types

ISO 13564-1:2012

Powered industrial trucks -- Test methods for verification of visibility -- Part 1: Sit-on and stand-on operator trucks and variable-reach trucks up to and including 10 t capacity

ISO 5744:2004

Pliers and nippers -- Methods of test

ISO 5745:2004

Pliers and nippers -- Pliers for gripping and manipulating -- Dimensions and test values

ISO 9562:2004

Water quality -- Determination of adsorbable organically bound halogens (AOX)

ISO/IEC 29168-2:2011

Information technology -- Open systems interconnection -- Part 2: Procedures for the object identifier resolution system operational agency

ISO 9654:2004

Pliers and nippers for electronics -- Single-purpose nippers -- Cutting nippers

ISO 9655:2004

Pliers and nippers for electronics -- Single-purpose pliers -- Pliers for gripping and manipulating

ISO 8979:2004

Pliers and nippers for electronics -- Nomenclature

ISO/IEC 15852:1999

Information technology -- Programming languages -- M Windowing API

ISO 4433-1:1997

Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 1: Immersion test method

ISO 10530:1992

Water quality -- Determination of dissolved sulfide -- Photometric method using methylene blue

ISO 13821:2002

Corrugated fibreboard -- Determination of edgewise crush resistance -- Waxed edge method

ISO 8826-1:1989

Technical drawings -- Rolling bearings -- Part 1: General simplified representation

ISO 22915-10:2008

Industrial trucks -- Verification of stability -- Part 10: Additional stability test for trucks operating in the special condition of stacking with load laterally displaced by powered devices

ISO/TS 17518:2015

Medical laboratories -- Reagents for staining biological material -- Guidance for users

ISO 17885:2015

Plastics piping systems -- Mechanical fittings for pressure piping systems -- Specifications

ISO 15616-1:2003

Acceptance tests for CO2-laser beam machines for high quality welding and cutting -- Part 1: General principles, acceptance conditions

ISO/IEC Guide 68:2002

Arrangements for the recognition and acceptance of conformity assessment results

ISO 14189:2013

Water quality -- Enumeration of Clostridium perfringens -- Method using membrane filtration

ISO 2036:1976

Wood for manufacture of wood flooring -- Symbols for marking according to species

ISO 6545:1992

Acceptance conditions for gear hobbing machines -- Testing of the accuracy

ISO 12570:2000

Hygrothermal performance of building materials and products -- Determination of moisture content by drying at elevated temperature

ISO 22915-15:2013

Industrial trucks -- Verification of stability -- Part 15: Counterbalanced trucks with articulated steering

ISO 15765-1:2011

Road vehicles -- Diagnostic communication over Controller Area Network (DoCAN) -- Part 1: General information and use case definition

ISO 735:1977

Oilseed residues -- Determination of ash insoluble in hydrochloric acid

ISO 5742:2004

Pliers and nippers -- Nomenclature

ISO/IEC 27050-2:2018

Information technology -- Electronic discovery -- Part 2: Guidance for governance and management of electronic discovery

ISO 13785-1:2002

Reaction-to-fire tests for façades -- Part 1: Intermediate-scale test

ISO 5006:2017

Earth-moving machinery -- Operator's field of view -- Test method and performance criteria

ISO 10377:2013

Consumer product safety -- Guidelines for suppliers

ISO 3438:2013

Subland twist drills for holes prior to tapping screw threads

ISO 2076:2013

Textiles -- Man-made fibres -- Generic names

ISO 13209-3:2012

Road vehicles -- Open Test sequence eXchange format (OTX) -- Part 3: Standard extensions and requirements

ISO 631:1975

Mosaic parquet panels -- General characteristics

ISO 105-A04:1989

Textiles -- Tests for colour fastness -- Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabrics

ISO 105-A05:1996

Textiles -- Tests for colour fastness -- Part A05: Instrumental assessment of change in colour for determination of grey scale rating

ISO 4433-2:1997

Thermoplastics pipes -- Resistance to liquid chemicals -- Classification -- Part 2: Polyolefin pipes

ISO 11393-6:2018

Protective clothing for users of hand-held chainsaws -- Part 6: Performance requirements and test methods for upper body protectors

ISO 3648:1994

Aviation fuels -- Estimation of net specific energy

ISO/TS 19475-2:2018

Document management -- Minimum requirements for the storage of documents -- Part 2: Storage

ISO/TS 19475-1:2018

Document management -- Minimum requirements for the storage of documents -- Part 1: Capture

ISO 11393-5:2018

Protective clothing for users of hand-held chainsaws -- Part 5: Performance requirements and test methods for protective gaiters

ISO 12637-1:2006

Graphic technology -- Vocabulary -- Part 1: Fundamental terms

ISO 11393-4:2018

Protective clothing for users of hand-held chainsaws -- Part 4: Performance requirements and test methods for protective gloves

ISO 16404:2013

Space systems -- Programme management -- Requirements management

ISO 9448-3:2013

Tools for pressing -- Guide bushes -- Part 3: Form B, ball cage bushes, plain, type 1

ISO/TS 16843-2:2015

Health informatics -- Categorial structures for representation of acupuncture -- Part 2: Needling

ISO 9448-2:2013

Tools for pressing -- Guide bushes -- Part 2: Form A, gliding bushes, plain, type 1

ISO 7372:2005

Trade data interchange -- Trade data elements directory

ISO 9448-1:2013

Tools for pressing -- Guide bushes -- Part 1: Forms

ISO 10649-4:2013

Cutter arbors with parallel key and tenon drive -- Part 4: Dimensions and designation of tool holders with 7/24 taper without automatic tool changer 

Cutter arbors with parallel key and tenon drive -- Part 3: Dimensions and designation of tool holders with 7/24 taper for automatic tool changer

 

ISO 10649-2:2013

Cutter arbors with parallel key and tenon drive -- Part 2: Dimensions and designation of tool holders with taper interface with flange contact surface

ISO 9448-7:2013

Tools for pressing -- Guide bushes -- Part 7: Form F, ball cage bushes, flanged, type 1

ISO 9448-6:2013

Tools for pressing -- Guide bushes -- Part 6: Form E, gliding bushes, flanged, type 1

ISO 9448-5:2013

Tools for pressing -- Guide bushes -- Part 5: Form D, ball cage bushes, headed, type 1

ISO 15245-1:2001

Gas cylinders -- Parallel threads for connection of valves to gas cylinders -- Part 1: Specification

ISO/IEC 15291:1999

Information technology -- Programming languages -- Ada Semantic Interface Specification (ASIS)

ISO 15186-2:2003

Acoustics -- Measurement of sound insulation in buildings and of building elements using sound intensity -- Part 2: Field measurements

ISO 21843:2018

Determination of the resistance to hydrocarbon pool fires of fire protection materials and systems for pressure vessels

ISO 11393-2:2018

Protective clothing for users of hand-held chainsaws -- Part 2: Performance requirements and test methods for leg protectors

ISO/TS 10974:2018

Assessment of the safety of magnetic resonance imaging for patients with an active implantable medical device

ISO 2177:2003

Metallic coatings -- Measurement of coating thickness -- Coulometric method by anodic dissolution

ISO 10301:1997

Water quality -- Determination of highly volatile halogenated hydrocarbons -- Gas-chromatographic methods

ISO 12020:1997

Water quality -- Determination of aluminium -- Atomic absorption spectrometric methods

ISO/TS 13582:2015

Health informatics -- Sharing of OID registry information

ISO 9519:1990

Shipbuilding and marine structures -- Rungs for dog-step ladders

ISO 9182-2:2013

Tools for pressing -- Guide pillars -- Part 2: Type A, straight pillars

ISO 7299-2:2009

Diesel engines -- End-mounting flanges for pumps -- Part 2: High-pressure supply pumps for common rail fuel injection systems

ISO 9448-11:2013

Tools for pressing -- Guide bushes -- Part 11: Form F, ball cage bushes, flanged, type 2

ISO 9448-10:2013

Tools for pressing -- Guide bushes -- Part 10: Form E, gliding bushes, flanged, type 2

ISO 17862:2013

Surface chemical analysis -- Secondary ion mass spectrometry -- Linearity of intensity scale in single ion counting time-of-flight mass analysers

ISO/TS 18223:2015

Nickel alloys -- Determination of Nickel content -- Inductively coupled plasma atomic emission spectrometric method

ISO 5492:2008

Sensory analysis -- Vocabulary

ISO 9448-8:2013

Tools for pressing -- Guide bushes -- Part 8: Form G, gliding bushes, stepped, type 1

ISO 9182-5:2013

Tools for pressing -- Guide pillars -- Part 5: Type D, end-locking pillars with flange

ISO 9182-4:2013

Tools for pressing -- Guide pillars -- Part 4: Type C, pillars with taper lead and bush

ISO 13163:2013

Water quality -- Lead-210 -- Test method using liquid scintillation counting

ISO 2162-1:1993

Technical product documentation -- Springs -- Part 1: Simplified representation

ISO 2162-2:1993

Technical product documentation -- Springs -- Part 2: Presentation of data for cylindrical helical compression springs

ISO 7314:2002

Aerospace -- Fluid systems -- Metal hose assemblies

ISO 17993:2002

Water quality -- Determination of 15 polycyclic aromatic hydrocarbons (PAH) in water by HPLC with fluorescence detection after liquid-liquid extraction

ISO 7405:2018

Dentistry -- Evaluation of biocompatibility of medical devices used in dentistry

ISO 20152-1:2010

Timber structures -- Bond performance of adhesives -- Part 1: Basic requirements

ISO 10708:1997

Water quality -- Evaluation in an aqueous medium of the ultimate aerobic biodegradability of organic compounds -- Determination of biochemical oxygen demand in a two-phase closed bottle test

ISO 8973:1997

Liquefied petroleum gases -- Calculation method for density and vapour pressure

ISO 8194:1987

Radiation protection -- Clothing for protection against radioactive contamination -- Design, selection, testing and use

ISO 834-6:2000

Fire-resistance tests -- Elements of building construction -- Part 6: Specific requirements for beams

ISO 17331:2004

Surface chemical analysis -- Chemical methods for the collection of elements from the surface of silicon-wafer working reference materials and their determination by total-reflection X-ray fluorescence (TXRF) spectroscopy

ISO 15870:2000

Powered industrial trucks -- Safety signs and hazard pictorials -- General principles

ISO 497:1973

Guide to the choice of series of preferred numbers and of series containing more rounded values of preferred numbers

ISO/TS 25108:2018

Non-destructive testing -- NDT personnel training organizations

ISO/PAS 19695:2015

Motorcycles -- Functional safety

ISO/TS 16697:2012

Space systems -- Safety and compatibility of materials - Method to determine the flammability thresholds of materials

ISO 11:1987

Aircraft -- Ground pressure testing connections for pressure cabins

ISO/ASTM 51956:2013

Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation processing

ISO 16303:2013

Water quality -- Determination of toxicity of fresh water sediments using Hyalellaazteca

ISO 17279-1:2018

Welding -- Micro joining of 2nd generation high temperature superconductors -- Part 1: General requirements for the procedure

ISO 12640-5:2013

Graphic technology -- Prepress digital data exchange -- Part 5: Scene-referred standard colour image data (RIMM/SCID)

ISO 14697:2007

Reaction-to-fire tests -- Guidance on the choice of substrates for building and transport products

ISO 6251:1996

Liquefied petroleum gases -- Corrosiveness to copper -- Copper strip test

ISO 18629-1:2004

Industrial automation systems and integration -- Process specification language -- Part 1: Overview and basic principles

ISO 4481:1977

Cutlery and flatware -- Nomenclature

ISO 6460-1:2007

Motorcycles -- Measurement method for gaseous exhaust emissions and fuel consumption -- Part 1: General test requirements

ISO 5421:1977

Ground high speed steel tool bits

ISO 2916:1975

Wool -- Determination of alkali content

ISO 5423:1992

Moulded plastics footwear -- Lined or unlined polyurethane boots for general industrial use -- Specification

ISO/TS 22595-1:2006

Dentistry -- Plant area equipment -- Part 1: Suction systems

ISO 22286:2018

Petroleum products and lubricants - Determination of the dropping point of grease with an automatic apparatus

ISO/IEC 8825-8:2018

Information technology -- ASN.1 encoding rules -- Part 8: Specification of JavaScript Object Notation Encoding Rules (JER)

ISO 22285:2018

Petroleum products and lubricants -- Determination of oil separation from grease -- Pressure filtration method

ISO 3822-4:1997

Acoustics -- Laboratory tests on noise emission from appliances and equipment used in water supply installations -- Part 4: Mounting and operating conditions for special appliances

ISO 22418:2018

Intelligent transport systems -- Fast service announcement protocol (FSAP)

ISO 20419:2018

Treated wastewater reuse for irrigation -- Guidelines for the adaptation of irrigation systems and practices to treated wastewater

ISO 10121-2:2013

Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation -- Part 2: Gas-phase air cleaning devices (GPACD)

ISO 14256-2:2005

Soil quality -- Determination of nitrate, nitrite and ammonium in field-moist soils by extraction with potassium chloride solution -- Part 2: Automated method with segmented flow analysis

ISO 9271:1992

Decontamination of radioactively contaminated surfaces -- Testing of decontamination agents for textiles

ISO 9235:2013

Aromatic natural raw materials -- Vocabulary

ISO 2924:1973

Solid and segmental circular saws for cold cutting of metals -- Interchangeability dimensions of the drive -- Saw diameter range 224 to 2 240 mm

ISO 18077:2018

Reload startup physics tests for pressurized water reactors

ISO 3545-2:1989

Steel tubes and fittings -- Symbols for use in specifications -- Part 2: Square and rectangular hollow sections

ISO 3545-3:1989

Steel tubes and fittings -- Symbols for use in specifications -- Part 3: Tubular fittings with circular cross-section

ISO 3545-1:1989

Steel tubes and fittings -- Symbols for use in specifications -- Part 1: Tubes and tubular accessories with circular cross-section

ISO/IEC 23000-7:2008

Information technology -- Multimedia application format (MPEG-A) -- Part 7: Open access application format

ISO/PAS 19450:2015

Automation systems and integration -- Object-Process Methodology


Read count: 2207 Previous page Back to top
Other news