ISO 3690:2018

Welding and allied processes -- Determination of hydrogen content in arc weld metal

ISO 10303-227:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 227: Application protocol: Plant spatial configuration

ISO 11126-3:2018

Preparation of steel substrates before application of paints and related products -- Specifications for non-metallic blast-cleaning abrasives -- Part 3: Copper refinery slag

ISO 13153:2012

Framework of the design process for energy-saving single-family residential and small commercial buildings

ISO 10303-219:2007

Industrial automation systems and integration -- Product data representation and exchange -- Part 219: Application protocol: Dimensional inspection information exchange

ISO 4232-3:1984

Office machines -- Minimum information to be included in specification sheets -- Part 3: Postal franking machines

ISO 4232-2:1980

Office machines -- Minimum information to be included in specifications sheets -- Part 2: Document copying machines

ISO/TS 10303-1002:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1002: Application module: Colour

ISO/TS 10303-1003:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1003: Application module: Curve appearance

ISO/TS 10303-1010:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1010: Application module: Date time

ISO/TS 10303-1008:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1008: Application module: Layer assignment

ISO 21043-2:2018

Forensic sciences -- Part 2: Recognition, recording, collecting, transport and storage of items

ISO 11640:2018

Leather -- Tests for colour fastness -- Colour fastness to cycles of to-and-fro rubbing

ISO/TS 10303-1022:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1022: Application module: Part and version identification

ISO 8249:2018

Welding -- Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals

ISO 6888-3:2003

Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) -- Part 3: Detection and MPN technique for low numbers

ISO 22846-2:2012

Personal equipment for protection against falls -- Rope access systems -- Part 2: Code of practice

ISO 5138-2:1980

Office machines -- Vocabulary -- Part 2: Duplicators

ISO 5138-1:1978

Office machines -- Vocabulary -- Part 1: Dictation equipment

ISO 5138-4:1981

Office machines -- Vocabulary -- Part 4: Letter opening machines

ISO 5138-3:1981

Office machines -- Vocabulary -- Part 3: Addressing machines

ISO 4720:2018

Essential oils -- Nomenclature

ISO 16992:2018

Passenger car tyres -- Spare unit substitutive equipment (SUSE)

ISO 19040-3:2018

Water quality -- Determination of the estrogenic potential of water and waste water -- Part 3: In vitro human cell-based reporter gene assay

ISO/TS 21219-3:2015

Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 3: UML to binary conversion rules

ISO/TS 21219-5:2015

Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 5: Service framework (TPEG2-SFW)

ISO 10303-515:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 515: Application interpreted construct: Constructive solid geometry

ISO/TS 21219-6:2015

Intelligent transport systems - Traffic and travel information(TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 6: Message management container (TPEG2-MMC)

ISO/TS 21219-18:2015

Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 18: Traffic flow and prediction application (TPEG2-TFP)

ISO 10303-509:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 509: Application interpreted construct: Manifold surface

ISO 10303-510:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 510: Application interpreted construct: Geometrically bounded wireframe

ISO 10303-507:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 507: Application interpreted construct: Geometrically bounded surface

ISO 10303-508:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 508: Application interpreted construct: Non-manifold surface

ISO 10303-513:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 513: Application interpreted construct: Elementary boundary representation

ISO 10303-511:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 511: Application interpreted construct: Topologically bounded surface

ISO 6011:2003

Earth-moving machinery -- Visual display of machine operation

ISO 10303-112:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 112: Integrated application resource: Modelling commands for the exchange of procedurally represented 2D CAD models

ISO 17763:2018

Space systems -- Human-life activity support systems and equipment integration in space flight

ISO 18363-2:2018

Animal and vegetable fats and oils -- Determination of fatty-acid-bound chloropropanediols (MCPDs) and glycidol by GC/MS -- Part 2: Method using slow alkaline transesterification and measurement for 2-MCPD, 3-MCPD and glycidol

ISO 7547:2002

Ships and marine technology -- Air-conditioning and ventilation of accommodation spaces -- Design conditions and basis of calculations

ISO 15926-2:2003

Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 2: Data model

ISO/IEC 17007:2009

Conformity assessment -- Guidance for drafting normative documents suitable for use for conformity assessment

ISO 10303-34:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 34: Conformance testing methodology and framework: Abstract test methods for application protocol implementations

ISO 17572-2:2018

Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 2: Pre-coded location references (pre-coded profile)

ISO 10448:1994

Agricultural tractors -- Hydraulic pressure for implements

ISO/IEC 23008-8:2018

Information technology -- High efficiency coding and media delivery in heterogeneous environments -- Part 8: Conformance specification for HEVC

ISO/TS 15926-12:2018

Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 12: Life-cycle integration ontology represented in Web Ontology Language (OWL)

ISO 15926-13:2018

Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 13: Integrated asset planning life-cycle

ISO 11567:2018

Carbon fibre -- Determination of filament diameter and cross-sectional area

ISO/TS 10303-1286:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1286: Application module: Work order characterized

ISO 4042:2018

Fasteners -- Electroplated coating systems

ISO 16145-4:2013

Ships and marine technology -- Protective coatings and inspection method -- Part 4: Automated measuring method for the total amount of water-soluble salts

ISO 7202:2018

Fire protection -- Fire extinguishing media -- Powder

ISO/IEC TS 17021-5:2014

Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 5: Competence requirements for auditing and certification of asset management systems

ISO/TS 10303-1285:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1285: Application module: Work request characterized

ISO 8791-1:1986

Paper and board -- Determination of roughness/smoothness (air leak methods) -- Part 1: General method

ISO/TS 10303-1357:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1357: Application module: Selected item

ISO/TS 10303-1218:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1218: Application module: Hybrid breakdown

ISO 22380:2018

Security and resilience -- Authenticity, integrity and trust for products and documents -- General principles for product fraud risk and countermeasures

ISO 10303-54:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 54: Integrated generic resource: Classification and set theory

ISO/IEEE 11073-20702:2018

Health informatics -- Point-of-care medical device communication -- Part 20702: Medical devices communication profile for web services

ISO/TS 10303-1214:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1214: Application module: System breakdown

ISO 10303-111:2007

Industrial automation systems and integration -- Product data representation and exchange -- Part 111: Integrated application resource : Elements for the procedural modelling of solid shapes

ISO/TS 10303-1217:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1217: Application module: Zonal breakdown

ISO 6741-1:1989

Textiles -- Fibres and yarns -- Determination of commercial mass of consignments -- Part 1: Mass determination and calculations

ISO 1419:2018

Rubber- or plastics-coated fabrics -- Accelerated-ageing tests

ISO 10303-505:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 505: Application interpreted construct: Drawing structure and administration

ISO 11199-2:2005

Walking aids manipulated by both arms -- Requirements and test methods -- Part 2: Rollators

ISO/TS 10303-1365:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1365: Application module: Time interval assignment

ISO/TS 10303-1364:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1364: Application module: Event assignment

ISO 10303-502:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 502: Application interpreted construct: Shell-based wireframe

ISO 10303-501:2000

Industrial automation systems and integration -- Product data representation and exchange -- Part 501: Application interpreted construct: Edge-based wireframe

ISO/TS 10303-1273:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1273: Application module: Resource property assignment

ISO/TS 10303-1277:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1277: Application module: Location assignment

ISO/TS 10303-1276:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1276: Application module: Location

ISO/TS 10303-1358:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1358: Application module: Location assignment characterized

ISO 18629-41:2006

Industrial automation systems and integration -- Process specification language -- Part 41: Definitional extension: Activity extensions

ISO 14067:2018

Greenhouse gases -- Carbon footprint of products -- Requirements and guidelines for quantification

ISO 18275:2018

Welding consumables -- Covered electrodes for manual metal arc welding of high-strength steels -- Classification

ISO 8789:2018

Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles -- Specification

ISO/TR 20218-1:2018

Robotics -- Safety design for industrial robot systems -- Part 1: End-effectors

ISO/IEC TR 23008-15:2018

Information technology -- High efficiency coding and media delivery in heterogeneous environments -- Part 15: Signalling, backward compatibility and display adaptation for HDR/WCG video

ISO 2401:2018

Welding consumables -- Covered electrodes -- Determination of the efficiency, metal recovery and deposition coefficient

ISO/TS 10303-1340:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1340: Application module: Name assignment

ISO/TS 10303-1298:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1298: Application module: Activity method characterized

ISO/TS 10303-1210:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1210: Application module: Set theory

ISO/IEC TR 23008-14:2018

Information technology -- High efficiency coding and media delivery in heterogeneous environments -- Part 14: Conversion and coding practices for HDR/WCG Y'CbCr 4:2:0 video with PQ transfer characteristics

ISO/TS 10303-1272:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1272: Application module: Activity characterized

ISO/TS 10303-1250:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1250: Application module: Attachment slot

ISO 18629-43:2006

Industrial automation systems and integration -- Process specification language -- Part 43: Definitional extension: Activity ordering and duration extensions

ISO 3977-7:2002

Gas turbines -- Procurement -- Part 7: Technical information

ISO 3977-8:2002

Gas turbines -- Procurement -- Part 8: Inspection, testing, installation and commissioning

ISO/TS 10303-1301:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1301: Application module: Work output characterized

ISO/TS 10303-1294:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1294: Application module: Application module: Interface lifecycle

ISO/TS 10303-1300:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1300: Application module: Work output

ISO/IEC 7811-2:2018

Identification cards -- Recording technique -- Part 2: Magnetic stripe: Low coercivity

ISO 48-4:2018

Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 4: Indentation hardness by durometer method (Shore hardness)

ISO/IEC 7811-1:2018

Identification cards -- Recording technique -- Part 1: Embossing

ISO 48-3:2018

Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 3: Dead-load hardness using the very low rubber hardness (VLRH) scale

ISO 48-2:2018

Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 2: Hardness between 10 IRHD and 100 IRHD

ISO 48-1:2018

Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 1: Introduction and guidance

ISO/IEC 19823-19:2018

Information technology -- Conformance test methods for security service crypto suites -- Part 19: Crypto suite RAMON

ISO 11298-3:2018

Plastics piping systems for renovation of underground water supply networks -- Part 3: Lining with close-fit pipes

ISO 15065:2005

Countersinks for countersunk head screws with head configuration in accordance with ISO 7721

ISO/TS 10303-1243:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1243: Application module: Experience

ISO 24373:2018

Welding consumables -- Solid wires and rods for fusion welding of copper and copper alloys -- Classification

ISO 3066:1986

Duplicating machines -- Registration

ISO 11297-3:2018

Plastics piping systems for renovation of underground drainage and sewerage networks under pressure -- Part 3: Lining with close-fit pipes

ISO 22159:2007

Personal equipment for protection against falls -- Descending devices

ISO/TS 10303-1240:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1240: Application module: Organization type

ISO/TS 10303-1244:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1244: Application module: Qualifications

ISO/TS 10303-1245:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1245: Application module: Type of person

ISO/IEC 7816-4:2013/Amd 2:2018

Waiting time management

ISO/TS 6336-22:2018

Calculation of load capacity of spur and helical gears -- Part 22: Calculation of micropitting load capacity

ISO 2812-5:2018

Paints and varnishes -- Determination of resistance to liquids -- Part 5: Temperature-gradient oven method

ISO 9902-6:2018

Textile machinery -- Noise test code -- Part 6: Fabric manufacturing machinery

ISO 48-9:2018

Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 9: Calibration and verification of hardness testers

ISO 48-8:2018

Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 8: Apparent hardness of rubber-covered rollers by Pusey and Jones method

ISO 48-7:2018

Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 7: Apparent hardness of rubber-covered rollers by Shore-type durometer method

ISO/IEC 7811-7:2018

Identification cards -- Recording technique -- Part 7: Magnetic stripe: High coercivity, high density

ISO 48-6:2018

Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 6: Apparent hardness of rubber-covered rollers by IRHD method

ISO 48-5:2018

Rubber, vulcanized or thermoplastic -- Determination of hardness -- Part 5: Indentation hardness by IRHD pocket meter method

ISO 25639-2:2008

Exhibitions, shows, fairs and conventions -- Part 2: Measurement procedures for statistical purposes

ISO 10303-28:2007

Industrial automation systems and integration -- Product data representation and exchange -- Part 28: Implementation methods: XML representations of EXPRESS schemas and data, using XML schemas

ISO 25639-1:2008

Exhibitions, shows, fairs and conventions -- Part 1: Vocabulary

ISO 9650-1:2005

Small craft -- Inflatable liferafts -- Part 1: Type I

ISO 9650-2:2005

Small craft -- Inflatable liferafts -- Part 2: Type II

ISO/IEC 7811-6:2018

Identification cards -- Recording technique -- Part 6: Magnetic stripe: High coercivity

ISO 16100-6:2018

Industrial automation systems and integration -- Manufacturing software capability profiling for interoperability -- Part 6: Interface services and protocols for matching profiles based on multiple capability class structures

ISO 21970-1:2018

Plastics -- Polyketone (PK) moulding and extrusion materials -- Part 1: Designation system and basis for specifications

ISO/TS 10303-1105:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1105: Application module: Multi linguism

ISO 22179:2009

Intelligent transport systems -- Full speed range adaptive cruise control (FSRA) systems -- Performance requirements and test procedures

ISO 13584-24:2003

Industrial automation systems and integration -- Parts library -- Part 24: Logical resource: Logical model of supplier library

ISO/IEC 1001:2012

Information technology -- File structure and labelling of magnetic tapes for information interchange