ISO 4027:2003

Hexagon socket set screws with cone point

ISO 4026:2003

Hexagon socket set screws with flat point

ISO 20596-1:2018

Water quality -- Determination of cyclic volatile methylsiloxanes in water -- Part 1: Method using purge and trap with gas chromatography-mass spectrometry (GC-MS)

ISO/TS 19407:2015

Footwear -- Sizing -- Conversion of sizing systems

ISO 11783-6:2018

Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 6: Virtual terminal

ISO/TS 10303-1051:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1051: Application module: Geometric tolerance

ISO 8871-2:2003

Elastomeric parts for parenterals and for devices for pharmaceutical use -- Part 2: Identification and characterization

ISO/IEC 18014-2:2009

Information technology -- Security techniques -- Time-stamping services -- Part 2: Mechanisms producing independent tokens

ISO/IEC 17963:2013

Web Services for Management (WS-Management) Specification

ISO 12779:2011

Lactose -- Determination of water content -- Karl Fischer method

ISO 4028:2003

Hexagon socket set screws with dog point

ISO 8640-2:2004

Textile machinery and accessories -- Flat warp knitting machines -- Part 2: Vocabulary of warp let-off, fabric take-up and batching

ISO 4029:2003

Hexagon socket set screws with cup point

ISO 8640-1:2004

Textile machinery and accessories -- Flat warp knitting machines -- Part 1: Vocabulary of basic structure and knitting elements

ISO 20860-2:2009

Road vehicles -- 50 ohms impedance radio frequency connection system interface -- Part 2: Test procedures

ISO 5930:1979

Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of phosphorus content -- Reduced molybdophosphate photometric method

ISO/IEC 18450:2013

Information technology -- Telecommunications and information exchange between systems -- Web Services Description Language (WSDL) for CSTA Phase III

ISO 14641:2018

Electronic document management -- Design and operation of an information system for the preservation of electronic documents -- Specifications

ISO 22881:2004

Castors and wheels -- Requirements for use on manually propelled equipment for institutional applications

ISO/TS 10303-1380:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1380: Application module: Fea definition relationships

ISO 18899:2013

Rubber -- Guide to the calibration of test equipment

ISO 15228:2005

Textile machinery and accessories -- Profile reeds for air jet weaving machines -- Dimensions

ISO 5838-1:2013

Implants for surgery -- Metallic skeletal pins and wires -- Part 1: General requirements

ISO 2342:2003

Slotted headless screws with shank

ISO 17401:2004

Space systems -- Spacecraft interface requirements document for launch vehicle services

ISO 5537:2004

Dried milk -- Determination of moisture content (Reference method)

ISO 8968-3:2004

Milk -- Determination of nitrogen content -- Part 3: Block-digestion method (Semi-micro rapid routine method)

ISO 14848:1998

Plastics -- Unsaturated-polyester resins -- Determination of reactivity at 130 degrees C

ISO 11446-2:2012

Road vehicles -- Connectors for the electrical connection of towing and towed vehicles -- Part 2: 13-pole connectors for vehicles with 12 V nominal supply voltage intended to cross water fords

ISO 11699-1:2008

Non-destructive testing -- Industrial radiographic film -- Part 1: Classification of film systems for industrial radiography

ISO 8851-2:2004

Butter -- Determination of moisture, non-fat solids and fat contents (Routine methods) -- Part 2: Determination of non-fat solids content

ISO 5128:1980

Acoustics -- Measurement of noise inside motor vehicles

ISO 3433:2008

Cheese -- Determination of fat content -- Van Gulik method

ISO 2478:1987

Dense shaped refractory products -- Determination of permanent change in dimensions on heating

ISO 5544:2008

Caseins -- Determination of " fixed ash " (Reference method)

ISO 3935:1977

Shipbuilding -- Inland navigation -- Fire-fighting water system -- Pressures

ISO 8122:2003

Textile machinery -- Knitting machines -- Number of needles for circular knitting machines of large nominal diameter

ISO 8117:2003

Textile machinery -- Knitting machines -- Nominal diameters of circular machines

ISO 10303-232:2002

Industrial automation systems and integration -- Product data representation and exchange -- Part 232: Application protocol: Technical data packaging core information and exchange

ISO 6427:2013

Plastics -- Determination of matter extractable by organic solvents (conventional methods)

ISO 13091-2:2003

Mechanical vibration -- Vibrotactile perception thresholds for the assessment of nerve dysfunction -- Part 2: Analysis and interpretation of measurements at the fingertips

ISO 7617-3:1988

Plastics-coated fabrics for upholstery -- Part 3: Specification for polyurethane-coated woven fabrics

ISO 14644-10:2013

Cleanrooms and associated controlled environments -- Part 10: Classification of surface cleanliness by chemical concentration

ISO 340:2013

Conveyor belts -- Laboratory scale flammability characteristics -- Requirements and test method

ISO 12492:2012

Rubber, raw -- Determination of water content by Karl Fischer method

ISO 19013-1:2005

Rubber hoses and tubing for fuel circuits for internal combustion engines -- Specification -- Part 1: Diesel fuels

ISO 6915:1991

Flexible cellular polymeric materials -- Polyurethane foam for laminate use -- Specification

ISO 25964-2:2013

Information and documentation -- Thesauri and interoperability with other vocabularies -- Part 2: Interoperability with other vocabularies

ISO 1524:2013

Paints, varnishes and printing inks -- Determination of fineness of grind

ISO 5256:1985

Steel pipes and fittings for buried or submerged pipe lines -- External and internal coating by bitumen or coal tar derived materials

ISO 10437:2003

Petroleum, petrochemical and natural gas industries -- Steam turbines -- Special-purpose applications

ISO 10684:2004

Fasteners -- Hot dip galvanized coatings

ISO 29462:2013

Field testing of general ventilation filtration devices and systems for in situ removal efficiency by particle size and resistance to airflow

ISO 6123-3:1985

Rubber- or plastics-covered rollers -- Specifications -- Part 3: Dimensional tolerances

ISO 3187:1989

Refractory products -- Determination of creep in compression

ISO 3858:2018

Rubber compounding ingredients -- Carbon black -- Determination of light transmittance of toluene extract

ISO/TS 21219-3:2015

Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 3: UML to binary conversion rules

ISO/TS 10303-1012:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 1012: Application module: Approval

ISO 8116-1:1995

Textile machinery and accessories -- Beams for winding -- Part 1: General vocabulary

ISO/TS 21219-5:2015

Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 5: Service framework (TPEG2-SFW)

ISO 4674-2:1998

Rubber- or plastics-coated fabrics -- Determination of tear resistance -- Part 2: Ballistic pendulum method

ISO/TS 21219-6:2015

Intelligent transport systems - Traffic and travel information(TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 6: Message management container (TPEG2-MMC)

ISO/TS 21219-18:2015

Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 18: Traffic flow and prediction application (TPEG2-TFP)

ISO 14113:2013

Gas welding equipment -- Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa)

ISO 19012-2:2013

Microscopes -- Designation of microscope objectives -- Part 2: Chromatic correction

ISO/IEC 18000-6:2013

Information technology -- Radio frequency identification for item management -- Part 6: Parameters for air interface communications at 860 MHz to 960 MHz General

ISO 2409:2013

Paints and varnishes -- Cross-cut test

ISO 1833-22:2013

Textiles -- Quantitative chemical analysis -- Part 22: Mixtures of viscose or certain types of cupro or modal or lyocell and flax fibres (method using formic acid and zinc chloride)

ISO 9785:2002

Ships and marine technology -- Ventilation of cargo spaces where vehicles with internal combustion engines are driven -- Calculation of theoretical total airflow required

ISO 3308:2012

Routine analytical cigarette-smoking machine -- Definitions and standard conditions

ISO 10264:1990

Earth-moving machinery -- Key-locked starting systems

ISO/IEC 23001-11:2015

Information technology -- MPEG systems technologies -- Part 11: Energy-efficient media consumption (green metadata)

ISO 11070:2014/Amd 1:2018

ISO 10303-43:2011

Industrial automation systems and integration -- Product data representation and exchange -- Part 43: Integrated generic resource: Representation structures

ISO 12743:2018

Copper, lead, zinc and nickel concentrates -- Sampling procedures for determination of metal and moisture content

ISO 17792:2006

Milk, milk products and mesophilic starter cultures -- Enumeration of citrate-fermenting lactic acid bacteria -- Colony-count technique at 25 degrees C

ISO 16145-4:2013

Ships and marine technology -- Protective coatings and inspection method -- Part 4: Automated measuring method for the total amount of water-soluble salts

ISO/TR 22335:2007

Surface chemical analysis -- Depth profiling -- Measurement of sputtering rate: mesh-replica method using a mechanical stylus profilometer

ISO 6588-2:2012

Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 2: Hot extraction

ISO 6588-1:2012

Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 1: Cold extraction

ISO 15592-2:2001

Fine-cut tobacco and smoking articles made from it -- Methods of sampling, conditioning and analysis -- Part 2: Atmosphere for conditioning and testing

ISO 14693:2003

Petroleum and natural gas industries -- Drilling and well-servicing equipment

ISO 2975-1:1974

Measurement of water flow in closed conduits -- Tracer methods -- Part 1: General

ISO/TS 10303-1765:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 1765: Application module: Characterizable object

ISO 10115:2013

ISO 17447-1:2015

Road Vehicles -- Glow-plugs with conical seating and their cylinder head housing -- Part 1: Basic characteristics and dimensions for metal-sheath-type glow-plugs

ISO 976:2013

Rubber and plastics -- Polymer dispersions and rubber latices -- Determination of pH

ISO 14644-8:2013

Cleanrooms and associated controlled environments -- Part 8: Classification of air cleanliness by chemical concentration (ACC)

ISO 20566:2013

Paints and varnishes -- Determination of the scratch resistance of a coating system using a laboratory-scale car-wash

ISO/TR 8124-9:2018

Safety of toys -- Part 9: Safety aspects related to mechanical and physical properties -- Comparison of ISO 8124-1, EN 71-1, and ASTM F963

ISO 9691:1992

Rubber -- Recommendations for the workmanship of pipe joint rings -- Description and classification of imperfections

ISO 7494-1:2018

Dentistry -- Stationary dental units and dental patient chairs -- Part 1: General requirements

ISO/IEC 19794-11:2013

Information technology -- Biometric data interchange formats -- Part 11: Signature/sign processed dynamic data

ISO 9614-1:1993

Acoustics -- Determination of sound power levels of noise sources using sound intensity -- Part 1: Measurement at discrete points

ISO 8528-2:2018

Reciprocating internal combustion engine driven alternating current generating sets -- Part 2: Engines

ISO 3056:1986

Non-calibrated round steel link lifting chain and chain slings -- Use and maintenance

ISO 4264:2018

Petroleum products -- Calculation of cetane index of middle-distillate fuels by the four variable equation

ISO/TS 10303-1635:2010

Industrial automation systems and integration -- Product data representation and exchange -- Part 1635: Application module: Assembly functional interface requirement

ISO 22274:2013

Systems to manage terminology, knowledge and content -- Concept-related aspects for developing and internationalizing classification systems

ISO 4491-4:2013

Metallic powders -- Determination of oxygen content by reduction methods -- Part 4: Total oxygen by reduction-extraction

ISO 11170:2013

Hydraulic fluid power -- Sequence of tests for verifying performance characteristics of filter elements

ISO/TS 26844:2006

Milk and milk products -- Determination of antimicrobial residues -- Tube diffusion test

ISO 10348:1993

Photography -- Processing wastes -- Determination of silver content

ISO 9974-1:1996

Connections for general use and fluid power -- Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports

ISO 3602:1989

Documentation -- Romanization of Japanese (kana script)

ISO 7617-2:2003

Plastics-coated fabrics for upholstery -- Part 2: Specification for PVC-coated woven fabrics

ISO 6914:2013

Rubber, vulcanized or thermoplastic -- Determination of ageing characteristics by measurement of stress relaxation in tension

ISO 15884:2002

Milk fat -- Preparation of fatty acid methyl esters

ISO 8987:2005

Plastics -- Phenolic resins -- Determination of reactivity on a B-transformation test plate

ISO 8619:2003

Plastics -- Phenolic resin powder -- Determination of flow distance on a heated glass plate

ISO 276:2002

Binders for paints and varnishes -- Linseed stand oil -- Requirements and methods of test

ISO 22654:2002

Footwear -- Test methods for outsoles -- Tensile strength and elongation

ISO 15593:2001

Environmental tobacco smoke -- Estimation of its contribution to respirable suspended particles -- Determination of particulate matter by ultraviolet absorbance and by fluorescence

ISO 15764:2004

Road vehicles -- Extended data link security

ISO 5017:2013

Dense shaped refractory products -- Determination of bulk density, apparent porosity and true porosity

ISO 15902:2004

Optics and photonics -- Diffractive optics -- Vocabulary

ISO 14649-13:2013

Automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 13: Process data for wire electrical discharge machining (wire-EDM)

ISO 14649-14:2013

Automation systems and integration -- Physical device control -- Data model for computerized numerical controllers -- Part 14: Process data for sink electrical discharge machining (sink-EDM)

ISO 7593:1986

Chain slings assembled by methods other than welding -- Grade T(8)

ISO 15065:2005

Countersinks for countersunk head screws with head configuration in accordance with ISO 7721

ISO 19012-1:2013

Microscopes -- Designation of microscope objectives -- Part 1: Flatness of field/Plan

ISO 8686-2:2018

Cranes -- Design principles for loads and load combinations -- Part 2: Mobile cranes

ISO 2721:2013

Photography -- Film-based cameras -- Automatic controls of exposure

ISO 22628:2002

Road vehicles -- Recyclability and recoverability -- Calculation method

ISO 20112-1:2018

Tractors and machinery for agriculture and forestry -- Camera interface between tractor and implement -- Part 1: Analogue camera interface

ISO 8870:2006

Milk and milk-based products -- Detection of thermonuclease produced by coagulase-positive staphylococci

ISO 7653:1985

Road vehicles -- Commercial vehicles -- Couplings between power take-offs (PTO) and ancillary driven units

ISO 18924:2013

Imaging materials -- Test method for Arrhenius-type predictions

ISO 16047:2005

Fasteners -- Torque/clamp force testing

ISO 18925:2013

Imaging materials -- Optical disc media -- Storage practices

ISO 13226:2018

Rubber -- Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers

ISO 18914:2013

Imaging materials -- Photographic film and papers -- Method for determining the resistance of photographic emulsions to wet abrasion

ISO 18927:2013

Imaging materials -- Recordable compact disc systems -- Method for estimating the life expectancy based on the effects of temperature and relative humidity

ISO 18096:2013

Thermal insulating products for building equipment and industrial installations -- Determination of maximum service temperature for preformed pipe insulation

ISO 446:2004

Micrographics -- ISO character and ISO test chart No. 1 -- Description and use

ISO 18097:2013

Thermal insulating products for building equipment and industrial installations -- Determination of maximum service temperature

ISO 18928:2013

Imaging materials -- Unprocessed photographic films and papers -- Storage practices

ISO 20128:2006

Milk products -- Enumeration of presumptive Lactobacillus acidophilus on a selective medium -- Colony-count technique at 37 degrees C

ISO 11452-10:2009

Road vehicles -- Component test methods for electrical disturbances from narrowband radiated electromagnetic energy -- Part 10: Immunity to conducted disturbances in the extended audio frequency range

ISO 18907:2013

Imaging materials -- Photographic films and papers -- Wedge test for brittleness

ISO 10847:1997

Acoustics -- In-situ determination of insertion loss of outdoor noise barriers of all types

ISO 3386-2:1997

Flexible cellular polymeric materials -- Determination of stress-strain characteristics in compression -- Part 2: High-density materials

ISO/ASTM 52116:2013

Practice for dosimetry for a self-contained dry-storage gamma irradiator

ISO 23274-1:2013

Hybrid-electric road vehicles -- Exhaust emissions and fuel consumption measurements -- Part 1: Non-externally chargeable vehicles

ISO 7641:2012

Road vehicles -- Trailers up to 3,5 t -- Calculation of the mechanical strength of steel drawbars

ISO/TR 15969:2001

Surface chemical analysis -- Depth profiling -- Measurement of sputtered depth

ISO/ASTM 51261:2013

Practice for calibration of routine dosimetry systems for radiation processing

ISO 718:1990

Laboratory glassware -- Thermal shock and thermal shock endurance -- Test methods

ISO 15952:2018

Soil quality -- Effects of pollutants on juvenile land snails (Helicidae) -- Determination of the effects on growth by soil contamination

ISO/TR 21932:2013

Sustainability in buildings and civil engineering works -- A review of terminology

ISO 8096:2005

Rubber- or plastics-coated fabrics for water-resistant clothing -- Specification

ISO 15170-1:2001

Road vehicles -- Four-pole electrical connectors with pins and twist lock -- Part 1: Dimensions and classes of application

ISO 15170-2:2001

Road vehicles -- Four-pole electrical connectors with pins and twist lock -- Part 2: Tests and requirements

ISO 3861:2005

Rubber hoses for sand and grit blasting -- Specification

ISO/IEC 15940:2013

Systems and software engineering -- Software Engineering Environment Services

ISO 720:1985

Glass -- Hydrolytic resistance of glass grains at 121 degrees C -- Method of test and classification

ISO/IEC 22536:2013

Information technology -- Telecommunications and information exchange between systems -- Near Field Communication Interface and Protocol (NFCIP-1) -- RF interface test methods

ISO 1403:2005

Rubber hoses, textile-reinforced, for general-purpose water applications -- Specification

ISO 12345:2013

Diesel engines -- Cleanliness assessment of fuel injection equipment