ISO 770:2002

Crude or rectified oils of Eucalyptus globulus (Eucalyptus globulusLabill.)

ISO 6353-3:1987

Reagents for chemical analysis -- Part 3: Specifications -- Second series

ISO/TS 10303-304:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 304: Abstract test suite: Mechanical design using boundary representation

ISO/TS 19713-2:2010

Road vehicles -- Inlet air cleaning equipment for internal combustion engines and compressors -- Part 2: Fractional efficiency testing with coarse particles (5 µm to 40 µm optical diameter)

ISO/IEEE 11073-30400:2012

Health informatics -- Point-of-care medical device communication -- Part 30400: Interface profile -- Cabled Ethernet

ISO 13183:2012

Intelligent transport systems -- Communications access for land mobiles (CALM) -- Using broadcast communications

ISO 10383:2012

Securities and related financial instruments -- Codes for exchanges and market identification (MIC)

ISO/TS 10303-1039:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1039: Application module: Geometric validation property representation

ISO 13175-3:2012

Implants for surgery -- Calcium phosphates -- Part 3: Hydroxyapatite and beta-tricalcium phosphate bone substitutes

ISO 6353-1:1982

Reagents for chemical analysis -- Part 1: General test methods

ISO 16482-1:2013

Binders for paints and varnishes -- Determination of the non-volatile-matter content of aqueous rosin-resin dispersions -- Part 1: Oven method

ISO/TS 10303-1501:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1501: Application module: Edge based wireframe

ISO 6353-2:1983

Reagents for chemical analysis -- Part 2: Specifications -- First series

ISO 16482-2:2013

Binders for paints and varnishes -- Determination of the non-volatile-matter content of aqueous rosin-resin dispersions -- Part 2: Microwave method

ISO/TS 10303-1502:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1502: Application module: Shell based wireframe

ISO 3760:2002

Oil of celery seed (Apiumgraveolens L.)

ISO 10303-240:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 240: Application protocol: Process plans for machined products

ISO 19979:2018

Ophthalmic optics -- Contact lenses -- Hygienic management of multipatient use trial contact lenses

ISO 14597:1997

Petroleum products -- Determination of vanadium and nickel content -- Wavelength-dispersive X-ray fluorescence spectrometry

ISO 16900-7:2015

Respiratory protective devices -- Methods of test and test equipment -- Part 7: Practical performance test methods

ISO/TS 10303-1036:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1036: Application module: Independent property

ISO 11003-1:2001

Adhesives -- Determination of shear behaviour of structural adhesives -- Part 1: Torsion test method using butt-bonded hollow cylinders

ISO/IEC 25041:2012

Systems and software engineering -- Systems and software Quality Requirements and Evaluation (SQuaRE) -- Evaluation guide for developers, acquirers and independent evaluators

ISO 6182-5:2012

Fire protection -- Automatic sprinkler systems -- Part 5: Requirements and test methods for deluge valves

ISO/TS 10303-1124:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1124: Application module: Document structure

ISO/TS 10303-1128:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1128: Application module: External item identification assignment

ISO 10303-51:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 51: Integrated generic resource: Mathematical representation

ISO/TS 10303-1382:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1382: Application module: Finite element shape

ISO/TS 10303-1127:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1127: Application module: File identification

ISO 18747-1:2018

Determination of particle density by sedimentation methods -- Part 1: Isopycnic interpolation approach

ISO 4089:1979

Shipbuilding -- Inland navigation -- Sealing rubber for covers of cargo hatches

ISO/TS 17165-2:2018

Hydraulic fluid power -- Hose assemblies -- Part 2: Practices for hydraulic hose assemblies

ISO 7213:1981

Pulps -- Sampling for testing

ISO/TS 10303-1065:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1065: Application module: Time interval

ISO 10498:2004

Ambient air -- Determination of sulfur dioxide -- Ultraviolet fluorescence method

ISO 9117-1:2009

Paints and varnishes -- Drying tests -- Part 1: Determination of through-dry state and through-dry time

ISO/TS 24597:2011

Microbeam analysis -- Scanning electron microscopy -- Methods of evaluating image sharpness

ISO/TS 10303-1123:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1123: Application module: Document definition

ISO/IEC TS 29003:2018

Information technology -- Security techniques -- Identity proofing

ISO/TS 10303-1060:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1060: Application module: Product concept identification

ISO 13953:2001

Polyethylene (PE) pipes and fittings -- Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

ISO/TS 23556:2007

Performance test method for diesel engine soot-removal devices in lubricating oils -- Initial filtration efficiency

ISO 20289:2018

Surface chemical analysis -- Total reflection X-ray fluorescence analysis of water

ISO/TS 10303-1383:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1383: Application module: Finite elements

ISO/TS 10303-1384:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1384: Application module: Mesh connectivity

ISO 19085-10:2018

Woodworking machines -- Safety -- Part 10: Building site saws (contractor saws)

ISO 3384-2:2012

Rubber, vulcanized or thermoplastic -- Determination of stress relaxation in compression -- Part 2: Testing with temperature cycling

ISO 12979:1999

Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of C/H ratio in the quinoline-insoluble fraction

ISO 12977:1999

Carbonaceous materials for use in the production of aluminium -- Pitch for electrodes -- Determination of volatile matter content

ISO 13707:2000

Petroleum and natural gas industries -- Reciprocating compressors

ISO 4731:2012

Essential oil of geranium (Pelargonium x ssp.)

ISO 10303-14:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 14: Description methods: The EXPRESS-X language reference manual

ISO 21389:2004

Oil of gum turpentine, Chinese (mainly from Pinusmassoniana Lamb.)

ISO 4173:1980

Ferromolybdenum -- Determination of molybdenum content -- Gravimetric method

ISO 15531-43:2006

Industrial automation systems and integration -- Industrial manufacturing management data -- Part 43: Manufacturing flow management data: Data model for flow monitoring and manufacturing data exchange

ISO 11713:2000

Carbonaceous materials used in the production of aluminium -- Cathode blocks and baked anodes -- Determination of electrical resistivity at ambient temperature

ISO 4829-1:2018

Steel and cast iron -- Determination of total silicon contents -- Reduced molybdosilicate spectrophotometric method -- Part 1: Silicon contents between 0,05 % and 1,0 %

ISO/TS 10303-1044:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1044: Application module: Certification

ISO 16438:2012

Agricultural irrigation equipment -- Thermoplastic collapsible hoses for irrigation -- Specifications and test methods

ISO/TS 10303-1769:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1769: Application module: Fea material aspects

ISO 19833:2018

Furniture -- Beds -- Test methods for the determination of stability, strength and durability

ISO 638:2008

Paper, board and pulps -- Determination of dry matter content -- Oven-drying method

ISO/TS 10303-1014:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1014: Application module: Date time assignment

ISO/TS 10303-1511:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1511: Application module: Topologically bounded surface

ISO 10238:1999

Carbonaceous materials used in the production of aluminium -- Pitch for electrodes -- Determination of sulfur content by an instrumental method

ISO 3588:1977

Spices and condiments -- Determination of degree of fineness of grinding -- Hand sieving method (Reference method)

ISO 6421:2012

Hydrometry -- Methods for assessment of reservoir sedimentation

ISO 7120:1987

Petroleum products and lubricants -- Petroleum oils and other fluids -- Determination of rust-preventing characteristics in the presence of water

ISO 4404-1:2012

Petroleum and related products -- Determination of the corrosion resistance of fire-resistant hydraulic fluids -- Part 1: Water-containing fluids

ISO/TS 10303-1024:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1024: Application module: Product relationship

ISO 22476-4:2012

Geotechnical investigation and testing -- Field testing -- Part 4: Ménardpressuremeter test

ISO 3857-4:2012

Compressors, pneumatic tools and machines -- Vocabulary -- Part 4: Air treatment

ISO/TS 10303-1018:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1018: Application module: Product version

ISO 4224:2000

Ambient air -- Determination of carbon monoxide -- Non-dispersive infrared spectrometric method

ISO/TS 10303-1385:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1385: Application module: Mesh function

ISO/TS 10303-1386:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1386: Application module: Mesh topology

ISO 22476-1:2012

Geotechnical investigation and testing -- Field testing -- Part 1: Electrical cone and piezocone penetration test

ISO/TS 10303-1387:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1387: Application module: Product analysis

ISO 9631:2018

Rubber seals -- Joint rings for pipelines for hot-water supply up to 110 °C -- Specification for the material

ISO 3516:1997

Oil of coriander fruits (Coriandrumsativum L.)

ISO/TS 10303-1011:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1011: Application module: Person organization

ISO 15027-1:2012

Immersion suits -- Part 1: Constant wear suits, requirements including safety

ISO 16508:1999

Road traffic lights -- Photometric properties of 200 mm roundel signals

ISO 15027-2:2012

Immersion suits -- Part 2: Abandonment suits, requirements including safety

ISO 16055:2012

Tobacco and tobacco products -- Monitor test piece -- Requirements and use

ISO 13199:2012

Stationary source emissions -- Determination of total volatile organic compounds (TVOCs) in waste gases from non-combustion processes -- Non-dispersive infrared analyser equipped with catalytic converter

ISO/TS 10303-1015:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1015: Application module: Security classification

ISO 22476-5:2012

Geotechnical investigation and testing -- Field testing -- Part 5: Flexible dilatometer test

ISO 15027-3:2012

Immersion suits -- Part 3: Test methods

ISO 10104:2018

Assembly tools for screws and nuts -- Double-headed box wrenches, deep offset and modified offset -- Outside dimensions

ISO/IEC 30136:2018

Information technology -- Performance testing of biometric template protection schemes

ISO 22476-7:2012

Geotechnical investigation and testing -- Field testing -- Part 7: Borehole jack test

ISO 10103:2018

Assembly tools for screws and nuts -- Doubled-headed box wrenches, flat and offset -- Outside dimensions and test torques

ISO 10102:2018

Assembly tools for screws and nuts -- Double-headed open-ended engineers' wrenches -- Outside dimensions

ISO 11148-4:2012

Hand-held non-electric power tools -- Safety requirements -- Part 4: Non-rotary percussive power tools

ISO 11148-6:2012

Hand-held non-electric power tools -- Safety requirements -- Part 6: Assembly power tools for threaded fasteners

ISO/TR 23087:2018

Automation systems and integration -- The Big Picture of standards

ISO 756-1:1981

Propan-2-ol for industrial use -- Methods of test -- Part 1: General

ISO 15597:2001

Petroleum and related products -- Determination of chlorine and bromine content -- Wavelength-dispersive X-ray fluorescence spectrometry

ISO/IEC 19896-1:2018

IT security techniques -- Competence requirements for information security testers and evaluators -- Part 1: Introduction, concepts and general requirements

ISO 5356-2:2012

Anaesthetic and respiratory equipment -- Conical connectors -- Part 2: Screw-threaded weight-bearing connectors

ISO/TS 18234-3:2013

Intelligent transport systems -- Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format -- Part 3: Service and network information (TPEG1-SNI)

ISO 15748-1:2002

Ships and marine technology -- Potable water supply on ships and marine structures -- Part 1: Planning and design

ISO/IEC 25437:2012

Information technology -- Telecommunications and information exchange between systems -- WS-Session -- Web services for application session services

ISO 14015:2001

Environmental management -- Environmental assessment of sites and organizations (EASO)

ISO 3363:1976

Fluorochlorinated hydrocarbons for industrial use -- Determination of acidity -- Titrimetric method

ISO 17314:2008

Manually portable forest machinery -- Recyclability and recoverability -- Calculation method

ISO 9233-2:2018

Cheese, cheese rind and processed cheese -- Determination of natamycin content -- Part 2: High-performance liquid chromatographic method for cheese, cheese rind and processed cheese

ISO 3969:1979

Shipbuilding -- Inland vessels -- Operational documentation

ISO 7148-1:2012

Plain bearings -- Testing of the tribologicalbehaviour of bearing materials -- Part 1: Testing of bearing metals

ISO 3216:1997

Oil of cassia, Chinese type (CinnamomumaromaticumNees, syn. Cinnamomum cassia Nees ex Blume)

ISO 9853:1991

Injection-mouldedunplasticized poly(vinyl chloride) (PVC-U) fittings for pressure pipe systems -- Crushing test

ISO 4125:1991

Dry fruits and dried fruits -- Definitions and nomenclature

ISO/IEC 19796-3:2009

Information technology -- Learning, education and training -- Quality management, assurance and metrics -- Part 3: Reference methods and metrics

ISO 5970:1979

Furniture -- Chairs and tables for educational institutions -- Functional sizes

ISO 10134:2003

Small craft -- Electrical devices -- Lightning-protection systems

ISO 11357-6:2018

Plastics -- Differential scanning calorimetry (DSC) -- Part 6: Determination of oxidation induction time (isothermal OIT) and oxidation induction temperature (dynamic OIT)

ISO 15749-4:2004

Ships and marine technology -- Drainage systems on ships and marine structures -- Part 4: Sanitary drainage, sewage disposal pipes

ISO 16548:2012

Ships and marine technology -- Ship design -- General guidance on emergency towing procedures

ISO 15749-5:2004

Ships and marine technology -- Drainage systems on ships and marine structures -- Part 5: Drainage of decks, cargo spaces and swimming pools

ISO 11357-3:2018

Plastics -- Differential scanning calorimetry (DSC) -- Part 3: Determination of temperature and enthalpy of melting and crystallization

ISO/TS 21619:2018

Geometrical product specifications (GPS) -- Types of documents with GPS

ISO 15749-2:2004

Ships and marine technology -- Drainage systems on ships and marine structures -- Part 2: Sanitary drainage, drain piping for gravity systems

ISO 15749-3:2004

Ships and marine technology -- Drainage systems on ships and marine structures -- Part 3: Sanitary drainage, drain piping for vacuum systems

ISO 11505:2012

Surface chemical analysis -- General procedures for quantitative compositional depth profiling by glow discharge optical emission spectrometry

ISO 15749-1:2004

Ships and marine technology -- Drainage systems on ships and marine structures -- Part 1: Sanitary drainage-system design

ISO 2366:1974

Cryolite, natural and artificial -- Determination of sodium content -- Flame emission and atomic absorption spectrophotometric methods

ISO 12611:2004

Cinematography -- Audio head tones for use in international exchange of 35 mm analogue magnetic film masters -- Specifications and location

ISO 7148-2:2012

Plain bearings -- Testing of the tribologicalbehaviour of bearing materials -- Part 2: Testing of polymer-based bearing materials

ISO 11155-2:2009

Road vehicles -- Air filters for passenger compartments -- Part 2: Test for gaseous filtration

ISO 3141:1997

Oil of clove leaves [Syzygiumaromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]

ISO 3143:1997

Oil of clove stems [Syzygiumaromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]

ISO 5938:1979

Cryolite, natural and artificial, and aluminium fluoride for industrial use -- Determination of sulphur content -- X-ray fluorescence spectrometric method

ISO 3142:1997

Oil of clove buds [Syzygiumaromaticum (L.) Merr. et Perry, syn. Eugenia caryophyllus (Sprengel) Bullock et S. Harrison]

ISO 2974:2018

Diesel engines -- 60° female cones for high-pressure fuel injection components

ISO/TS 28560-4:2014

Information and documentation -- RFID in libraries -- Part 4: Encoding of data elements based on rules from ISO/IEC 15962 in an RFID tag with partitioned memory

ISO 7146-1:2008

Plain bearings -- Appearance and characterization of damage to metallic hydrodynamic bearings -- Part 1: General

ISO 13898-1:1997

Steel and iron -- Determination of nickel, copper and cobalt contents -- Inductively coupled plasma atomic emission spectrometric method -- Part 1: General requirements and sample dissolution

ISO 4136:2012

Destructive tests on welds in metallic materials -- Transverse tensile test

ISO/TS 17182:2014

Soil quality -- Determination of some selected phenols and chlorophenols -- Gas chromatographic method with mass spectrometric detection

ISO 9016:2012

Destructive tests on welds in metallic materials -- Impact tests -- Test specimen location, notch orientation and examination

ISO 12168-1:2001

Plain bearings -- Hydrostatic plain journal bearings without drainage grooves under steady-state conditions -- Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves

ISO/TS 14072:2014

Environmental management -- Life cycle assessment -- Requirements and guidelines for organizational life cycle assessment

ISO/TS 14071:2014

Environmental management -- Life cycle assessment -- Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006

ISO 12130-1:2001

Plain bearings -- Hydrodynamic plain tilting pad thrust bearings under steady-state conditions -- Part 1: Calculation of tilting pad thrust bearings

ISO 2424:2007

Textile floor coverings -- Vocabulary

ISO 2303:2011

Isoprene rubber (IR) -- Non-oil-extended, solution-polymerized types -- Evaluation procedures

ISO/TS 16775:2014

Packaging for terminally sterilized medical devices -- Guidance on the application of ISO 11607-1 and ISO 11607-2

ISO 7629:1987

Road vehicles -- Brake linings -- Disc brake pads -- Evaluation of surface and material flaws after testing

ISO/TS 10303-1257:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1257: Application module: Condition characterized

ISO/TS 10303-1254:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1254: Application module: Condition evaluation

ISO/TS 18234-2:2013

Intelligent transport systems -- Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format -- Part 2: Syntax, semantics and framing structure (TPEG1-SSF)

ISO 4919:2012

Carpets -- Determination of tuft withdrawal force

ISO/TS 10303-1249:2004

Industrial automation systems and integration -- Product data representation and exchange -- Part 1249: Application module: Activity method assignment

ISO 10577:2012

Resilient floor coverings -- Specification for rubber sheet floor coverings without backing

ISO 248-2:2012

Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit

ISO 10575:2012

Resilient floor coverings -- Specification for rubber sheet floor coverings with backing

ISO 12205:1995

Petroleum products -- Determination of the oxidation stability of middle-distillate fuels