ISO 20078-1:2019

Road vehicles -- Extended vehicle (ExVe) web services -- Part 1: Content

ISO/IEC 24786:2009

Information technology -- User interfaces -- Accessible user interface for accessibility settings

ISO 21370:2019

Traditional Chinese medicine -- Dendrobium officinale stem

ISO 15106-3:2003

Plastics -- Film and sheeting -- Determination of water vapour transmission rate -- Part 3: Electrolytic detection sensor method

ISO 13044-2:2013

Road vehicles -- Fully automatic coupling systems 24 V (FACS) for heavy commercial vehicle combinations -- Part 2: 50 mm fifth wheel couplings -- Electrical and pneumatic interface

ISO 6106:2013

Abrasive products -- Checking the grain size of superabrasives

ISO 5421:1977

Ground high speed steel tool bits

ISO 13015:2013

Woven fabrics -- Distortion -- Determination of skew and bow

ISO 4869-6:2019

Acoustics -- Hearing protectors -- Part 6: Determination of sound attenuation of active noise reduction earmuffs

ISO 13588:2019

Non-destructive testing of welds -- Ultrasonic testing -- Use of automated phased array technology

ISO 21286:2019

Soil quality -- Identification of ecotoxicological test species by DNA barcoding

ISO 3740:2019

Acoustics -- Determination of sound power levels of noise sources -- Guidelines for the use of basic standards

ISO 9162:2013

Petroleum products -- Fuels (class F) -- Liquefied petroleum gases -- Specifications

ISO 11929-1:2019

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation -- Fundamentals and application -- Part 1: Elementary applications

ISO 10008:2013

Quality management -- Customer satisfaction -- Guidelines for business-to-consumer electronic commerce transactions

ISO 18195:2019

Method for the justification of fire partitioning in water cooled nuclear power plants (NPP)

ISO 799-1:2019

Ships and marine technology -- Pilot ladders -- Part 1: Design and specification

ISO 56003:2019

Innovation management -- Tools and methods for innovation partnership -- Guidance

ISO 9665:1998

Adhesives -- Animal glues -- Methods of sampling and testing

ISO 20677:2019

Image technology colour management -- Extensions to architecture, profile format and data structure

ISO 1268-8:2004

Fibre-reinforced plastics -- Methods of producing test plates -- Part 8: Compression moulding of SMC and BMC

ISO 16571:2014

Systems for evacuation of plume generated by medical devices

ISO 1268-9:2003

Fibre-reinforced plastics -- Methods of producing test plates -- Part 9: Moulding of GMT/STC

ISO 12164-4:2014

Hollow taper interface with flange contact surface -- Part 4: Dimensions of receivers for stationary tools

ISO 23551-6:2014

Safety and control devices for gas burners and gas-burning appliances -- Particular requirements -- Part 6: Thermoelectric flame supervision controls

ISO 15330:1999

Fasteners -- Preloading test for the detection of hydrogen embrittlement -- Parallel bearing surface method

ISO 8573-4:2019

Compressed air -- Contaminant measurement -- Part 4: Particle content

ISO 2924:1973

Solid and segmental circular saws for cold cutting of metals -- Interchangeability dimensions of the drive -- Saw diameter range 224 to 2 240 mm

ISO 17072-2:2019

Leather -- Chemical determination of metal content -- Part 2: Total metal content

ISO 17072-1:2019

Leather -- Chemical determination of metal content -- Part 1: Extractable metals

ISO 21940-1:2019

Mechanical vibration -- Rotor balancing -- Part 1: Introduction

ISO 2935:1974

Circular saw blades for woodworking -- Dimensions

ISO 4042:2018

Fasteners -- Electroplated coating systems

ISO 3611:2010

Geometrical product specifications (GPS) -- Dimensional measuring equipment: Micrometers for external measurements -- Design and metrological characteristics

ISO 6588-2:2012

Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 2: Hot extraction

ISO 4384-1:2019

Plain bearings -- Hardness testing of bearing metals -- Part 1: Multilayer bearings materials

ISO 6588-1:2012

Paper, board and pulps -- Determination of pH of aqueous extracts -- Part 1: Cold extraction

ISO/IEC/IEEE 41062:2019

Software engineering -- Recommended practice for software acquisition

ISO 27875:2019

Space systems -- Re-entry risk management for unmanned spacecraft and launch vehicle orbital stages

ISO 5407:1981

As-sintered hardmetal pellets used in heading dies -- Dimensions and tolerances

ISO 11929-3:2019

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation -- Fundamentals and application -- Part 3: Applications to unfolding methods

ISO 13894-2:2005

High-pressure decorative laminates -- Composite elements -- Part 2: Specifications for composite elements with wood-based substrates for interior use

ISO 11929-2:2019

Determination of the characteristic limits (decision threshold, detection limit and limits of the coverage interval) for measurements of ionizing radiation -- Fundamentals and application -- Part 2: Advanced applications

ISO 50021:2019

Energy management and energy savings -- General guidelines for selecting energy savings evaluators

ISO 10087:2019

Small craft -- Craft identification -- Coding system

ISO 23500-3:2019

Preparation and quality management of fluids for haemodialysis and related therapies -- Part 3: Water for haemodialysis and related therapies

ISO 23500-4:2019

Preparation and quality management of fluids for haemodialysis and related therapies -- Part 4: Concentrates for haemodialysis and related therapies

ISO/TR 24097-3:2019

Intelligent transport systems -- Using web services (machine-machine delivery) for ITS service delivery -- Part 3: Quality of service

ISO 23500-1:2019

Preparation and quality management of fluids for haemodialysis and related therapies -- Part 1: General requirements

ISO 23500-2:2019

Preparation and quality management of fluids for haemodialysis and related therapies -- Part 2: Water treatment equipment for haemodialysis applications and related therapies

ISO 4899:1993

Textile-glass-reinforced thermosetting plastics -- Properties and test methods

ISO 23500-5:2019

Preparation and quality management of fluids for haemodialysis and related therapies -- Part 5: Quality of dialysis fluid for haemodialysis and related therapies

ISO 22241-1:2019

Diesel engines -- NOx reduction agent AUS 32 -- Part 1: Quality requirements

ISO 22241-2:2019

Diesel engines -- NOx reduction agent AUS 32 -- Part 2: Test methods

ISO/IEC 30106-3:2016

Information technology -- Object oriented BioAPI -- Part 3: C# implementation

ISO/IEC 30106-2:2016

Information technology -- Object oriented BioAPI -- Part 2: Java implementation

ISO 20903:2019

Surface chemical analysis -- Auger electron spectroscopy and X-ray photoelectron spectroscopy -- Methods used to determine peak intensities and information required when reporting results

ISO 22117:2019

Microbiology of the food chain -- Specific requirements and guidance for proficiency testing by interlaboratory comparison

ISO 3451-1:2019

Plastics -- Determination of ash -- Part 1: General methods

ISO/TR 56004:2019

Innovation Management Assessment -- Guidance

ISO 10704:2019

Water quality -- Gross alpha and gross beta activity -- Test method using thin source deposit

ISO 80369-3:2016/Amd 1:2019

ISO 10893-7:2019

Non-destructive testing of steel tubes -- Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

ISO 9163:2005

Textile glass -- Rovings -- Manufacture of test specimens and determination of tensile strength of impregnated rovings

ISO 24679-1:2019

Fire safety engineering -- Performance of structures in fire -- Part 1: General

ISO 10893-6:2019

Non-destructive testing of steel tubes -- Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections

ISO 9142:2003

Adhesives -- Guide to the selection of standard laboratory ageing conditions for testing bonded joints

ISO/IEC/IEEE 8802-3:2017/Amd 10:2019

Media access control parameters, physical layers, and management parameters for 200 Gb/s and 400 Gb/s operation

ISO/IEC/IEEE 8802-3:2017/Amd 11:2019

Physical layer and management parameters for serial 25 Gb/s ethernet operation over single-mode fiber

ISO 8601-2:2019

Date and time -- Representations for information interchange -- Part 2: Extensions

ISO/IEC/IEEE 8802-1CB:2019

Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 1CB: Frame replicaton and elimination for reliability

ISO 8601-1:2019

Date and time -- Representations for information interchange -- Part 1: Basic rules

ISO 5378:1978

Starches and derived products -- Determination of nitrogen content by the Kjeldahl method -- Spectrophotometric method

ISO 9782:1993

Plastics -- Reinforced moulding compounds and prepregs -- Determination of apparent volatile-matter content

ISO/TR 24524:2019

Service activities relating to drinking water supply, wastewater and stormwater systems -- Hydraulic, mechanical and environmental conditions in wastewater transport systems

ISO 27501:2019

The human-centred organization -- Guidance for managers

ISO 29768:2008

Thermal insulating products for building applications -- Determination of linear dimensions of test specimens

ISO 14632:1998

Extruded sheets of polyethylene (PE-HD) -- Requirements and test methods

ISO 12232:2019

Photography -- Digital still cameras -- Determination of exposure index, ISO speed ratings, standard output sensitivity, and recommended exposure index

ISO/IEC 30129:2015/Amd 1:2019

ISO 29770:2008

Thermal insulating products for building applications -- Determination of thickness for floating-floor insulating products

ISO/TS 19677:2019

Guidelines for assessing the adverse impact of wildland fires on the environment and to people through environmental exposure

ISO 789-6:2019

Agricultural tractors -- Test procedures -- Part 6: Centre of gravity

ISO 19636:2019

Ships and marine technology -- General requirements for inclinometers used for the determination of trim and list of LNG carriers

ISO 19065-2:2019

Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

ISO 29766:2008

Thermal insulating products for building applications -- Determination of tensile strength parallel to faces

ISO 19062-2:2019

Plastics -- Acrylonitrile-butadiene-styrene (ABS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determination of properties

ISO 10320:2019

Geosynthetics -- Identification on site

ISO 12855:2015

Electronic fee collection -- Information exchange between service provision and toll charging

ISO 16334:2013

Monolithic refractory products -- Determination of resistance to explosive spalling

ISO 7171:2019

Furniture -- Storage units -- Test methods for the determination of stability

ISO 11843-6:2019

Capability of detection -- Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations

ISO 5396:1977

Hardmetal heading dies -- Terminology

ISO/IEC/IEEE 8802-1Q:2016/Amd 7:2019

Cyclic queuing and forwarding

IWA 29:2019

Professional farmer organization -- Guidelines

ISO 15109:1998

Adhesives -- Determination of the time to rupture of bonded joints under static load

ISO 7971-2:2019

Cereals -- Determination of bulk density, called mass per hectolitre -- Part 2: Method of traceability for measuring instruments through reference to the international standard instrument

ISO 21600:2019

Technical product documentation (TPD) -- General requirements of mechanical product digital manuals

ISO/IEC 24709-2:2007

Information technology -- Conformance testing for the biometric application programming interface (BioAPI) -- Part 2: Test assertions for biometric service providers

ISO 2386:2015

Packed cork -- Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled reproduction cork and raw corkwaste -- Determination of moisture content

ISO 7971-3:2019

Cereals -- Determination of bulk density, called mass per hectolitre -- Part 3: Routine method

ISO 9161:2019

Uranium dioxide powder -- Determination of apparent density and tap density

ISO 19926-1:2019

Meteorology -- Weather radar -- Part 1: System performance and operation

ISO 18096:2013

Thermal insulating products for building equipment and industrial installations -- Determination of maximum service temperature for preformed pipe insulation

ISO 18097:2013

Thermal insulating products for building equipment and industrial installations -- Determination of maximum service temperature

ISO 15108:1998

Adhesives -- Determination of strength of bonded joints using a bending-shear method

ISO 15107:1998

Adhesives -- Determination of cleavage strength of bonded joints

ISO 16429:2004

Implants for surgery -- Measurements of open-circuit potential to assess corrosion behaviour of metallic implantable materials and medical devices over extended time periods

ISO 15987:2003

Plastics -- Film and sheeting -- Biaxially oriented polyamide (nylon) films

ISO 12164-2:2001

Hollow taper interface with flange contact surface -- Part 2: Receivers -- Dimensions

ISO 3613:2010

Metallic and other inorganic coatings -- Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys -- Test methods

ISO 17771:2003

Plastics -- Thermoset moulding compounds -- Determination of the degree of fibre wetting in SMC

ISO/TS 20758:2019

Traditional Chinese medicine -- Abdominal physiological parameter detectors

ISO 15630-2:2019

Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 2: Welded fabric and lattice girders

ISO 6964:2019

Polyolefin pipes and fittings -- Determination of carbon black content by calcination and pyrolysis -- Test method

ISO 9664:1993

Adhesives -- Test methods for fatigue properties of structural adhesives in tensile shear

ISO 14033:2019

Environmental management -- Quantitative environmental information -- Guidelines and examples

ISO 11359-3:2019

Plastics -- Thermomechanical analysis (TMA) -- Part 3: Determination of penetration temperature

ISO/IEC 14496-33:2019

Information technology -- Coding of audio-visual objects -- Part 33: Internet video coding

ISO 23753-1:2019

Soil quality -- Determination of dehydrogenases activity in soils -- Part 1: Method using triphenyltetrazolium chloride (TTC)

ISO 5167-6:2019

Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full -- Part 6: Wedge meters

ISO 15630-3:2019

Steel for the reinforcement and prestressing of concrete -- Test methods -- Part 3: Prestressing steel

ISO 23753-2:2019

Soil quality -- Determination of dehydrogenases activity in soils -- Part 2: Method using iodotetrazolium chloride (INT)

ISO 16696-1:2019

Timber structures -- Cross laminated timber -- Part 1: Component performance, production requirements and certification scheme

ISO 21683:2019

Pigments and extenders -- Determination of experimentally simulated nano-object release from paints, varnishes and pigmented plastics

ISO/IEC/IEEE 8802-A:2015/Amd 2:2019

Local medium access control (MAC) address usage

ISO 3901:2019

Information and documentation -- International Standard Recording Code (ISRC)

ISO 16531:2013

Surface chemical analysis -- Depth profiling -- Methods for ion beam alignment and the associated measurement of current or current density for depth profiling in AES and XPS

ISO 15166-1:1998

Adhesives -- Methods of preparing bulk specimens -- Part 1: Two-part systems

ISO 13931:2013

Carbon fibre -- Determination of volume resistivity