International Organization for Standards published April 2019 (Part 1)
-   +   A-   A+     17/04/2019
ISO 14064-2:2019
Greenhouse gases -- Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements
ISO/TS 17251:2016
Health informatics -- Business requirements for a syntax to exchange structured dose information for medicinal products
ISO 13616-2:2007
Financial services - International bank account number (IBAN) -- Part 2: Role and responsibilities of the Registration Authority

ISO 3070-3:2007

Machine tools -- Test conditions for testing the accuracy of boring and milling machines with horizontal spindle -- Part 3: Machines with movable column and movable table

ISO 5821:2009

Resistance welding -- Spot welding electrode caps

ISO 14064-3:2019

Greenhouse gases -- Part 3: Specification with guidance for the verification and validation of greenhouse gas statements

ISO/TS 10303-1665:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1665: Application module: Electrical network definition

ISO 11241:1994

Aircraft -- Aircraft engine transport devices

ISO/TS 10303-1602:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1602: Application module: Altered part

ISO/TS 14101:2012

Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method

 

ISO 25760:2009

Gas cylinders -- Operational procedures for the safe removal of valves from gas cylinders

ISO/TS 16951:2004

Road vehicles -- Ergonomic aspects of transport information and control systems (TICS) -- Procedures for determining priority of on-board messages presented to drivers

ISO 612:1978

Road vehicles -- Dimensions of motor vehicles and towed vehicles -- Terms and definitions

ISO 16373-3:2014

Textiles -- Dyestuffs -- Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol)

ISO 11979-2:2014

Ophthalmic implants -- Intraocular lenses -- Part 2: Optical properties and test methods

ISO 10985:2009

Caps made of aluminium-plastics combinations for infusion bottles and injection vials -- Requirements and test methods

ISO 6107-2:2006/Amd 1:2012

ISO 16145-5:2014

Ships and marine technology -- Protective coatings and inspection method -- Part 5: Assessment method for coating damages

ISO 1463:2003

Metallic and oxide coatings -- Measurement of coating thickness -- Microscopical method

ISO/TS 19709-3:2016

Transport packaging -- Small load container systems -- Part 3: Bond Stackable System (BSS)

ISO 7507-5:2000

Petroleum and liquid petroleum products -- Calibration of vertical cylindrical tanks -- Part 5: External electro-optical distance-ranging method

ISO 10153:1997

Steel -- Determination of boron content -- Curcumin spectrophotometric method

ISO 9368-1:1990

Measurement of liquid flow in closed conduits by the weighing method -- Procedures for checking installations -- Part 1: Static weighing systems

ISO 16399:2014

Meters for irrigation water

ISO 8612:2009

Ophthalmic instruments -- Tonometers

ISO 10306:2014

Textiles -- Cotton fibres -- Evaluation of maturity by the air flow method

ISO 17636-2:2013

Non-destructive testing of welds -- Radiographic testing -- Part 2: X- and gamma-ray techniques with digital detectors

ISO 16103:2005

Packaging -- Transport packaging for dangerous goods -- Recycled plastics material

ISO 7981-2:2005

Water quality -- Determination of polycyclic aromatic hydrocarbons (PAH) -- Part 2: Determination of six PAH by high-performance liquid chromatography with fluorescence detection after liquid-liquid extraction

ISO/IEC TR 12861:2009

Information technology -- Telecommunications and information exchange between systems -- Next Generation Corporate Networks (NGCN) -- Identification and routing

ISO 4386-1:2019

Plain bearings -- Metallic multilayer plain bearings -- Part 1: Non-destructive ultrasonic testing of bond of thickness greater than or equal to 0,5 mm

ISO 18412:2005

Water quality -- Determination of chromium(VI) -- Photometric method for weakly contaminated water

ISO 4386-2:2019

Plain bearings -- Metallic multilayer plain bearings -- Part 2: Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm

ISO/PAS 16898:2012

Electrically propelled road vehicles -- Dimensions and designation of secondary lithium-ion cells

ISO 14368-3:2003

Mineral and sapphire watch-glasses -- Part 3: Qualitative criteria and test methods

ISO 18629-11:2005

Industrial automation systems and integration -- Process specification language -- Part 11: PSL core

ISO 8898:2003

Oil of mandarin petitgrain (Citrus reticulata Blanco)

ISO 20474-15:2019

Earth-moving machinery -- Safety -- Part 15: Requirements for compact tool carriers

ISO/IEC 14543-5-12:2019

Information technology -- Home electronic systems (HES) architecture -- Part 5-12: Intelligent grouping and resource sharing for HES Class 2 and Class 3 -- Remote access test and verification

ISO 20170:2019

Geometrical product specifications (GPS) -- Decomposition of geometrical characteristics for manufacturing control

ISO/IEC 10514-3:1998

Information technology -- Programming languages -- Part 3: Object Oriented Modula-2

ISO 20228:2019

Interpreting services -- Legal interpreting -- Requirements

ISO/IEC 10514-2:1998

Information technology -- Programming languages -- Part 2: Generics Modula-2

ISO 11377:1997

Textile floor coverings -- Floor soiling -- Test site set-up and soiling evaluation

ISO 18259:2014

Ophthalmic optics -- Contact lens care products -- Method to assess contact lens care products with contact lenses in a lens case, challenged with bacterial and fungal organisms

ISO 9173-3:2014

Dentistry -- Extraction forceps -- Part 3: Design

ISO 13315-2:2014

Environmental management for concrete and concrete structures -- Part 2: System boundary and inventory data

ISO 11403-3:2014

Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties

ISO 19922:2005

Ships and marine technology -- Fire resistance of metallic pipe components with resilient and elastomeric seals -- Requirements imposed on the test bench

ISO 4701:2019

Iron ores and direct reduced iron -- Determination of size distribution by sieving

ISO 9276-2:2014

Representation of results of particle size analysis -- Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions

ISO 16609:2012

Financial services -- Requirements for message authentication using symmetric techniques

ISO 16063-16:2014

Methods for the calibration of vibration and shock transducers -- Part 16: Calibration by Earth's gravitation

ISO 3457:2003

Earth-moving machinery -- Guards -- Definitions and requirements

ISO 14532:2014

Natural gas -- Vocabulary

ISO 11563:2003

Crude petroleum and petroleum products -- Bulk cargo transfer -- Guidelines for achieving the fullness of pipelines

ISO 15531-32:2005

Industrial automation systems and integration -- Industrial manufacturing management data: Resources usage management -- Part 32: Conceptual model for resources usage management data

ISO 10343:2014

Ophthalmic instruments -- Ophthalmometers

ISO 16462:2014

Cubic boron nitride inserts, tipped or solid -- Dimensions, types

ISO 20506:2005

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of the in-plane shear strength of continuous-fibre-reinforced composites at ambient temperature by the Iosipescu test

ISO/TS 22002-6:2016

Prerequisite programmes on food safety -- Part 6: Feed and animal food production

ISO 11596:2008

Jewellery -- Sampling of precious metal alloys for and in jewellery and associated products

ISO 5822:1988

Spot welding equipment -- Taper plug gauges and taper ring gauges

ISO/TS 10303-1757:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1757: Application module: Test select product

ISO 5827:1983

Spot welding -- Electrode back-ups and clamps

ISO 14313:2007

Petroleum and natural gas industries -- Pipeline transportation systems -- Pipeline valves

ISO 20574:2019

Road vehicles -- Durability test method for starter motor for stop and start system

ISO 28520:2009

Ships and marine technology -- Lubricating oil systems -- Guidance for grades of cleanliness and flushing

ISO 3534-2:2006

Statistics -- Vocabulary and symbols -- Part 2: Applied statistics

ISO 4262:1993

Petroleum products -- Determination of carbon residue -- Ramsbottom method

ISO/IEC 13522-6:1998

Information technology -- Coding of multimedia and hypermedia information -- Part 6: Support for enhanced interactive applications

ISO 3761:2005

Oil of rosewood, Brazilian type (Aniba rosaeodora Ducke or Aniba parviflora (Meisn.) Mez.)

ISO 8032:1997

Rubber and plastics hose assemblies -- Flexing combined with hydraulic impulse test (half-omega test)

ISO 29841:2009

Vegetable fats and oils -- Determination of the degradation products of chlorophylls a and a' (pheophytins a, a' and pyropheophytins)

ISO/TS 10303-1745:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1745: Application module: Signal

ISO 11621:1997

Gas cylinders -- Procedures for change of gas service

ISO 9333:2006

Dentistry -- Brazing materials

ISO/TS 10303-1355:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1355: Application module: Parameterized catalog data and shape representation

ISO 13997:1999

Protective clothing -- Mechanical properties -- Determination of resistance to cutting by sharp objects

ISO 9506-2:2003

Industrial automation systems -- Manufacturing Message Specification -- Part 2: Protocol specification

ISO 10940:2009

Ophthalmic instruments -- Fundus cameras

ISO 3832:2002

Passenger cars -- Luggage compartments -- Method of measuring reference volume

ISO 7905-3:2019

Plain bearings -- Bearing fatigue -- Part 3: Test on plain strips of a metallic multilayer bearing material

ISO 22891:2013

Paper -- Determination of transmittance by diffuse reflectance measurement

ISO 14624-5:2006

Space systems -- Safety and compatibility of materials -- Part 5: Determination of reactivity of system/component materials with aerospace propellants

ISO 6689-2:1997

Equipment for harvesting -- Combines and functional components -- Part 2: Assessment of characteristics and performance defined in vocabulary

ISO/TS 10303-1659:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1659: Application module: Curve swept solid

ISO 21439:2009

Clinical dosimetry -- Beta radiation sources for brachytherapy

ISO 14624-6:2006

Space systems -- Safety and compatibility of materials -- Part 6: Determination of reactivity of processing materials with aerospace fluids

ISO 14624-7:2006

Space systems -- Safety and compatibility of materials -- Part 7: Determination of permeability and penetration of materials to aerospace fluids

ISO 1176:1990

Road vehicles -- Masses -- Vocabulary and codes

ISO 9506-1:2003

Industrial automation systems -- Manufacturing Message Specification -- Part 1: Service definition

ISO 17657-5:2005

Resistance welding -- Welding current measurement for resistance welding -- Part 5: Verification of welding current measuring system

ISO 12511:1997

Earth-moving machinery -- Hour meters

ISO/IEC TS 33052:2016

Information technology -- Process reference model (PRM) for information security management

ISO 4064-2:2014

Water meters for cold potable water and hot water -- Part 2: Test methods

ISO/TS 10303-1101:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 1101: Application module: Product property feature definition

ISO 16918-1:2009

Steel and iron -- Determination of nine elements by the inductively coupled plasma mass spectrometric method -- Part 1: Determination of tin, antimony, cerium, lead and bismuth

ISO/IEC 19788-7:2019

Information technology -- Learning, education and training -- Metadata for learning resources -- Part 7: Bindings

ISO 4064-5:2014

Water meters for cold potable water and hot water -- Part 5: Installation requirements

ISO 4064-4:2014

Water meters for cold potable water and hot water -- Part 4: Non-metrological requirements not covered in ISO 4064-1

ISO 15267:1998

Animal and vegetable fats and oils -- Flashpoint limit test using Pensky-Martens closed cup flash tester

ISO/TS 16975-1:2016

Respiratory protective devices -- Selection, use and maintenance -- Part 1: Establishing and implementing a respiratory protective device programme

ISO 18279:2003

Brazing -- Imperfections in brazed joints

ISO 3728:2004

Ice-cream and milk ice -- Determination of total solids content (Reference method)

ISO 1738:2004

Butter -- Determination of salt content

ISO/TS 10303-1113:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1113: Application module: Group

ISO 17299-5:2014

Textiles -- Determination of deodorant property -- Part 5: Metal-oxide semiconductor sensor method

ISO 16422:2014

Pipes and joints made of oriented unplasticized poly(vinyl chloride) (PVC-O) for the conveyance of water under pressure -- Specifications

ISO 5702:1983

Equipment for harvesting -- Combine harvester component parts -- Equivalent terms

ISO 17405:2014

Non-destructive testing -- Ultrasonic testing -- Technique of testing claddings produced by welding, rolling and explosion

ISO/IEC 15899:1998

Information technology -- Telecommunications and information exchange between systems -- Broadband Private Integrated Services Network -- Service description -- Broadband connection oriented bearer services

ISO 7682:2003

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Acrylonitrile-butadiene-styrene (ABS)

ISO 8770:2003

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polyethylene (PE)

ISO 7671:2003

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings -- Polypropylene (PP)

ISO 504:1975

Turning tools with carbide tips -- Designation and marking

ISO/IEC 9541-4:2009

Information technology -- Font information interchange -- Part 4: Harmonization to Open Font Format

ISO/TS 22077-3:2015

Health informatics -- Medical waveform format -- Part 3: Long term electrocardiography

ISO 6721-7:2019

Plastics -- Determination of dynamic mechanical properties -- Part 7: Torsional vibration -- Non-resonance method

ISO 6721-5:2019

Plastics -- Determination of dynamic mechanical properties -- Part 5: Flexural vibration -- Non-resonance method

ISO 10327:2014

Air cargo -- Main deck containers -- Design and testing

ISO 6721-6:2019

Plastics -- Determination of dynamic mechanical properties -- Part 6: Shear vibration -- Non-resonance method

ISO 855:2003

Oil of lemon [Citrus limon (L.) Burm. f.], obtained by expression

ISO 3493:2014

Vanilla -- Vocabulary

ISO 3016:2019

Petroleum and related products from natural or synthetic sources -- Determination of pour point

ISO 16240:2005

Water quality -- Determination of the genotoxicity of water and waste water -- Salmonella/microsome test (Ames test)

ISO 6746-1:2003

Earth-moving machinery -- Definitions of dimensions and codes -- Part 1: Base machine

ISO/IEC 14476-2:2003

Information technology -- Enhanced communications transport protocol: Specification of QoS management for simplex multicast transport

ISO 16373-2:2014

Textiles -- Dyestuffs -- Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water)

ISO/TS 10303-1291:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 1291: Application module: Plib class reference

ISO 3656:2011

Animal and vegetable fats and oils -- Determination of ultraviolet absorbance expressed as specific UV extinction

ISO 11499:2014

Dentistry -- Single-use cartridges for local anaesthetics

ISO/TS 21219-1:2016

Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 1: Introduction, numbering and versions (TPEG2-INV)

ISO 16300-2:2019

Automation systems and integration -- Interoperability of capability units for manufacturing application solutions -- Part 2: Capability templates and software unit cataloguing

ISO 12219-9:2019

Interior air of road vehicles -- Part 9: Determination of the emissions of volatile organic compounds from vehicle interior parts -- Large bag method

ISO 23814:2009

Cranes -- Competency requirements for crane inspectors

ISO/TS 21219-10:2016

Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 10: Conditional access information (TPEG2-CAI)

ISO/TS 21219-14:2016

Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 14: Parking information application (TPEG2-PKI)

ISO/TS 21219-15:2016

Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 15: Traffic event compact (TPEG2-TEC)

ISO/TS 21219-19:2016

Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 19: Weather information (TPEG2-WEA)

ISO/TR 22463:2019

Patient and client eye protectors for use during laser or intense light source (ILS) procedures -- Guidance

ISO 3524:2003

Oil of cinnamon leaf, Sri Lanka type (Cinnamomum zeylanicum Blume)

ISO 20957-6:2005

Stationary training equipment -- Part 6: Treadmills, additional specific safety requirements and test methods

ISO 16794:2003

Nuclear energy -- Determination of carbon compounds and fluorides in uranium hexafluoride infrared spectrometry

ISO 13322-1:2014

Particle size analysis -- Image analysis methods -- Part 1: Static image analysis methods

ISO 8539:2009

Forged steel lifting components for use with Grade 8 chain

ISO 50002:2014

Energy audits -- Requirements with guidance for use

ISO 366-2:2009

Textile machinery and accessories -- Reeds -- Part 2: Dimensions and designation of metal reeds with plate baulk

ISO 10079-2:2014

Medical suction equipment -- Part 2: Manually powered suction equipment

ISO 17217-1:2014

Traditional Chinese medicine -- Ginseng seeds and seedlings -- Part 1: Panax ginseng C.A. Meyer

ISO 10101-3:1993

Natural gas -- Determination of water by the Karl Fischer method -- Part 3: Coulometric procedure

ISO 27627:2014

Petroleum and natural gas industries -- Aluminium alloy drill pipe thread connection gauging

ISO 16345:2014

Water-cooling towers -- Testing and rating of thermal performance

ISO 15788-2:2003

Animal and vegetable fats and oils -- Determination of stigmastadienes in vegetable oils -- Part 2: Method using high-performance liquid chromatography (HPLC)

ISO/TR 20078-4:2019

Road vehicles -- Extended vehicle (ExVe) web services -- Part 4: Control

ISO 13631:2002

Petroleum and natural gas industries -- Packaged reciprocating gas compressors

ISO 5826:2014

Resistance welding equipment -- Transformers -- General specifications applicable to all transformers

ISO 8458-3:2002

Steel wire for mechanical springs -- Part 3: Oil-hardened and tempered wire

ISO 13179-1:2014

Implants for surgery -- Plasma-sprayed unalloyed titanium coatings on metallic surgical implants -- Part 1: General requirements

ISO 15510:2014

Stainless steels -- Chemical composition

ISO 11064-4:2013

Ergonomic design of control centres -- Part 4: Layout and dimensions of workstations

ISO 10079-3:2014

Medical suction equipment -- Part 3: Suction equipment powered from a vacuum or positive pressure gas source

ISO 5614:1988

Locked coil wire ropes for mine hoisting -- Technical delivery requirements

ISO/TS 21003-7:2019

Multilayer piping systems for hot and cold water installations inside buildings -- Part 7: Guidance for the assessment of conformity

ISO 7975:2019

Passenger cars -- Braking in a turn -- Open-loop test method

ISO 11843-1:1997

Capability of detection -- Part 1: Terms and definitions

ISO 5593:2019

Rolling bearings -- Vocabulary

ISO 4126-6:2014

Safety devices for protection against excessive pressure -- Part 6: Application, selection and installation of bursting disc safety devices

ISO 8899:2003

Oil of lemon petitgrain [Citrus limon (L.) Burm. f.]

ISO/TS 13811:2015

Tourism and related services -- Guidelines on developing environmental specifications for accommodation establishments

ISO 6182-10:2014

Fire protection -- Automatic sprinkler systems -- Part 10: Requirements and test methods for domestic sprinklers

ISO 21467:2004

Earth-moving machinery -- Horizontal directional drills -- Terminology and specifications

ISO 9801:2009

Ophthalmic instruments -- Trial case lenses

ISO 13612-2:2014

Heating and cooling systems in buildings -- Method for calculation of the system performance and system design for heat pump systems -- Part 2: Energy calculation

ISO 13629-2:2014

Textiles -- Determination of antifungal activity of textile products -- Part 2: Plate count method

ISO 27996:2009

Aerospace fluid systems -- Elastomer seals -- Storage and shelf life

ISO/TS 11155-1:2001

Road vehicles -- Air filters for passenger compartments -- Part 1: Test for particulate filtration

ISO 15877-1:2009

Plastics piping systems for hot and cold water installations -- Chlorinated poly(vinyl chloride) (PVC-C) -- Part 1: General

ISO 13820:2014

Paper, board and corrugated fibreboard -- Description and calibration of compression-testing equipment

ISO/TS 10303-1621:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1621: Application module: AP210 interconnect requirement allocation

ISO 15219:2004

Earth-moving machinery -- Cable excavators -- Terminology and commercial specifications

ISO 29769:2008

Thermal insulating products for building applications -- Determination of behaviour under point load

ISO 13955:1997

Plastics pipes and fittings -- Crushing decohesion test for polyethylene (PE) electrofusion assemblies

ISO 29764:2008

Thermal insulating products for building applications -- Determination of deformation under specified compressive load and temperature conditions

ISO/TS 10303-1619:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1619: Application module: AP210 interconnect functional requirements

ISO/TR 20693:2019

Statistical methods for implementation of Six Sigma -- Selected illustrations of distribution identification studies

ISO 19085-9:2019

Woodworking machines -- Safety -- Part 9: Circular saw benches (with and without sliding table)

ISO 13784-2:2002

Reaction-to-fire tests for sandwich panel building systems -- Part 2: Test method for large rooms

ISO 29771:2008

Thermal insulating materials for building applications -- Determination of organic content

ISO 9073-4:1997

Textiles -- Test methods for nonwovens -- Part 4: Determination of tear resistance

ISO 16311-3:2014

Maintenance and repair of concrete structures -- Part 3: Design of repairs and prevention

ISO 16311-4:2014

Maintenance and repair of concrete structures -- Part 4: Execution of repairs and prevention

ISO 7144:1986

Documentation -- Presentation of theses and similar documents

ISO 12625-7:2014

Tissue paper and tissue products -- Part 7: Determination of optical properties -- Measurement of brightness and colour with D65/10° (outdoor daylight)

ISO 21390:2005

Oil of wintergreen, China (Gaultheria yunnanensis (Franch.) Rehd.), redistilled

ISO 11843-3:2003

Capability of detection -- Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used

ISO/TS 10303-1612:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1612: Application module: AP210 device functional and physical characterization

ISO/TS 10303-1614:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1614: Application module: AP210 functional decomposition

ISO/TS 10303-1615:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1615: Application module: AP210 functional requirement allocation

ISO 15366-1:2014

Nuclear fuel technology -- Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography -- Part 1: Samples containing plutonium in the microgram range and uranium in the milligram range

ISO 15366-2:2014

Nuclear fuel technology -- Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography -- Part 2: Samples containing plutonium and uranium in the nanogram range and below

ISO 11428:1996

Ergonomics -- Visual danger signals -- General requirements, design and testing

ISO/TS 10303-1759:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1759: Application module: AP210 datum difference based model definition

ISO 11429:1996

Ergonomics -- System of auditory and visual danger and information signals

ISO 3435:1977

Continuous mechanical handling equipment -- Classification and symbolization of bulk materials

ISO 4100:1980

Road vehicles -- World parts manufacturer identifier (WPMI) code

ISO/TS 10303-1609:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1609: Application module: AP210 assembly requirement allocation

ISO 9373:1989

Cranes and related equipment -- Accuracy requirements for measuring parameters during testing

ISO 12219-5:2014

Interior air of road vehicles -- Part 5: Screening method for the determination of the emissions of volatile organic compounds from vehicle interior parts and materials -- Static chamber method

ISO 4405:1991

Hydraulic fluid power -- Fluid contamination -- Determination of particulate contamination by the gravimetric method

ISO/TS 10303-1605:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1605: Application module: AP210 assembly functional requirements

ISO/TS 10303-1658:2006

Industrial automation systems and integration -- Product data representation and exchange -- Part 1658: Application module: Connectivity allocation to physical network

ISO 7240-15:2014

Fire detection and alarm systems -- Part 15: Point-type fire detectors using smoke and heat sensors

ISO/TS 10303-1230:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 1230: Application module: Configuration controlled 3D parts and assemblies

ISO 24100:2010

Intelligent transport systems -- Basic principles for personal data protection in probe vehicle information services

ISO 11783-13:2011

Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 13: File server

ISO/IEC 13249-2:2003

Information technology -- Database languages -- SQL multimedia and application packages -- Part 2: Full-Text

ISO 21329:2004

Petroleum and natural gas industries -- Pipeline transportation systems -- Test procedures for mechanical connectors

ISO 18329:2004

Milk and milk products -- Determination of furosine content -- Ion-pair reverse-phase high-performance liquid chromatography method

ISO 21809-2:2014

Petroleum and natural gas industries -- External coatings for buried or submerged pipelines used in pipeline transportation systems -- Part 2: Single layer fusion-bonded epoxy coatings

ISO 7240-1:2014

Fire detection and alarm systems -- Part 1: General and definitions

ISO/TS 9241-411:2012

Ergonomics of human-system interaction -- Part 411: Evaluation methods for the design of physical input devices

ISO 16928:2014

Essential oil of ginger [Zingiber officinale Roscoe]

ISO 344:1981

Textile machinery and accessories -- Spinning machines -- Flyer bobbins

ISO/TS 10303-1313:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 1313: Application module: Mechanical design geometric presentation

ISO/TS 10303-1314:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 1314: Application module: Mechanical design shaded presentation

ISO 15796:2005

Gas analysis -- Investigation and treatment of analytical bias

ISO 8301:1991

Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Heat flow meter apparatus

ISO 3895:1986

Road vehicles -- Screened and waterproof spark-plug and its connection -- Type 2

ISO 15614-12:2014

Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 12: Spot, seam and projection welding

ISO/TS 10303-1144:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 1144: Application module: Building item

ISO 17255:2014

Space systems -- Programme management -- Statement of work

ISO 13975:2019

Plastics -- Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems -- Method by measurement of biogas production

ISO 5355:2019

Alpine ski-boots -- Requirements and test methods

ISO 18082:2014

Anaesthetic and respiratory equipment -- Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases

ISO 23606:2009

Textiles -- Knitted fabrics -- Representation and pattern design

ISO 9241-5:1998

Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 5: Workstation layout and postural requirements

ISO 2936:2014

Assembly tools for screws and nuts -- Hexagon socket screw keys

ISO 17657-4:2005

Resistance welding -- Welding current measurement for resistance welding -- Part 4: Calibration system

ISO/TS 10303-1322:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 1322: Application module: Modified swept solid

ISO 14246:2014

Gas cylinders -- Cylinder valves -- Manufacturing tests and examinations

ISO/IEC 23005-6:2019

Information technology -- Media context and control -- Part 6: Common types and tools

ISO/TS 10303-1324:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 1324: Application module: Non manifold surface

ISO 965-3:1998

ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads

ISO 965-4:1998

ISO general purpose metric screw threads -- Tolerances -- Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing

ISO 3070-1:2007

Machine tools -- Test conditions for testing the accuracy of boring and milling machines with horizontal spindle -- Part 1: Machines with fixed column and movable table

ISO 965-5:1998

ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing

ISO 22391-5:2009

Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 5: Fitness for purpose of the system

ISO 16484-6:2014

Building automation and control systems (BACS) -- Part 6: Data communication conformance testing

ISO 14258:1998

Industrial automation systems -- Concepts and rules for enterprise models

ISO 8458-1:2002

Steel wire for mechanical springs -- Part 1: General requirements

ISO/TS 10303-1329:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 1329: Application module: Elementary boundary representation

ISO/IEC TR 15410:1998

Information technology -- Telecommunciations and information exchange between systems -- PISN mobility-general principles and services aspects

ISO 17636-1:2013

Non-destructive testing of welds -- Radiographic testing -- Part 1: X- and gamma-ray techniques with film

ISO 13354:2014

Petroleum and natural gas industries -- Drilling and production equipment -- Shallow gas diverter equipment

ISO 22391-2:2009

Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 2: Pipes

ISO 22391-3:2009

Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 3: Fittings

ISO/TS 10303-1330:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 1330: Application module: Presentation hierarchy

ISO 18757:2003

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Determination of specific surface area of ceramic powders by gas adsorption using the BET method

ISO 3896:1986

Road vehicles -- Screened and waterproof spark-plug and its connection -- Type 3

ISO/TS 10303-1331:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 1331: Application module: External source

ISO 22391-1:2009

Plastics piping systems for hot and cold water installations -- Polyethylene of raised temperature resistance (PE-RT) -- Part 1: General

ISO 18646-2:2019

Robotics -- Performance criteria and related test methods for service robots -- Part 2: Navigation

ISO 18436-2:2014

Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 2: Vibration condition monitoring and diagnostics

ISO 8316:1987

Measurement of liquid flow in closed conduits -- Method by collection of the liquid in a volumetric tank

ISO 11783-7:2015

Tractors and machinery for agriculture and forestry -- Serial control and communications data network -- Part 7: Implement messages application layer

ISO 4131:1979

Road vehicles -- Dimensional codes for passenger cars

ISO 9241-920:2009

Ergonomics of human-system interaction -- Part 920: Guidance on tactile and haptic interactions

ISO 14624-1:2003

Space systems -- Safety and compatibility of materials -- Part 1: Determination of upward flammability of materials

ISO 20341:2003

Surface chemical analysis -- Secondary-ion mass spectrometry -- Method for estimating depth resolution parameters with multiple delta-layer reference materials

ISO 1735:2004

Cheese and processed cheese products -- Determination of fat content -- Gravimetric method (Reference method)

ISO 17184:2014

Soil quality -- Determination of carbon and nitrogen by near-infrared spectrometry (NIRS)

ISO/TS 10303-1775:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 1775: Application module: Currency

ISO 10294-5:2005

Fire resistance tests -- Fire dampers for air distribution systems -- Part 5: Intumescent fire dampers

ISO 16273:2003

Ships and marine technology -- Night vision equipment for high-speed craft -- Operational and performance requirements, methods of testing and required test results

ISO/TS 10303-1777:2008

Industrial automation systems and integration -- Product data representation and exchange -- Part 1777: Application module: External currency

ISO 3442-2:2005

Machine tools -- Dimensions and geometric tests for self-centring chucks with two-piece jaws -- Part 2: Power-operated chucks with tongue and groove type jaws

ISO 24035:2014

Belt drives -- V-belts and the corresponding pulleys for agricultural machineries -- Dimensions

ISO 7136:2006

Earth-moving machinery -- Pipelayers -- Terminology and commercial specifications

ISO 3154:1988

Stranded wire ropes for mine hoisting -- Technical delivery requirements

ISO 29042-3:2009

Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 3: Test bench method for the measurement of the emission rate of a given pollutant

ISO/TS 21189:2019

Intelligent transport systems -- Cooperative ITS -- Test requirements and protocol implementation conformance statement (PICS) pro forma for ISO/TS 17426

ISO 15519-1:2010

Specification for diagrams for process industry -- Part 1: General rules

ISO 22995:2019

Petroleum products -- Determination of cloud point -- Automated step-wise cooling method

ISO 16525-4:2014

Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 4: Determination of shear strength and electrical resistance using rigid-to-rigid bonded assemblies

ISO 13281-2:2000

Industrial automation systems and integration -- Manufacturing Automation Programming Environment (MAPLE) -- Part 2: Services and interfaces

ISO 2759:2014

Board -- Determination of bursting strength

ISO 16525-8:2014

Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 8: Electrochemical-migration test methods

ISO 16525-7:2014

Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 7: Environmental test methods

ISO 16525-6:2014

Adhesives -- Test methods for isotropic electrically conductive adhesives -- Part 6: Determination of pendulum-type shear impact

ISO 11329:2001

Hydrometric determinations -- Measurement of suspended sediment transport in tidal channels

ISO 3155:1976

Stranded wire ropes for mine hoisting -- Fibre components -- Characteristics and tests

ISO/TS 10303-1347:2005

Industrial automation systems and integration -- Product data representation and exchange -- Part 1347: Application module: Wireframe 2d

ISO 17484-2:2009

Plastics piping systems -- Multilayer pipe systems for indoor gas installations -- Part 2: Code of pratice

ISO/IEC 18000-63:2015

Information technology -- Radio frequency identification for item management -- Part 63: Parameters for air interface communications at 860 MHz to 960 MHz Type C

ISO 19642-1:2019

Road vehicles -- Automotive cables -- Part 1: Vocabulary and design guidelines

ISO 12619-3:2014

Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components -- Part 3: Pressure regulator

ISO 1452-1:2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 1: General

ISO 1452-5:2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 5: Fitness for purpose of the system

ISO 1452-4:2009

Plastics piping systems for water supply and for buried and above-ground drainage and sewerage under pressure -- Unplasticized poly(vinyl chloride) (PVC-U) -- Part 4: Valves.


Other news