International Organization for Standards published January 2020 (Part 1)

^- ⁺ A^- A⁺ 24/02/2020

ISO 5778:1998

Ships and marine technology — Small weathertight steel hatches

ISO 10547:2009

Polyester fibre ropes — Double braid construction

ISO 11810:2015

Lasers and laser-related equipment — Test method and classification for the laser resistance of surgical drapes and/or patient protective covers — Primary ignition, penetration, flame spread and secondary ignition

ISO 13775-1:2015

Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications

ISO 4575:2007

Plastics — Poly(vinyl chloride) pastes — Determination of apparent viscosity using the Severs rheometer

ISO 3018:1974

Textile floor coverings — Rectangular textile floor coverings — Determination of dimensions

ISO 15014:2007

Plastics — Extruded sheets of poly(vinylidene fluoride) (PVDF) — Requirements and test methods

ISO 18937:2020

Imaging materials — Photographic reflection prints — Methods for measuring indoor light stability

ISO 9803-1:2020

Vacuum technology — Mounting dimensions of pipeline fittings — Part 1: Non knife-edge flange type

ISO 6414:2020

Technical product documentation (TPD) — Technical drawings for glassware

ISO 21358:2020

Vacuum technology — Right-angle valve — Dimensions and interfaces for pneumatic actuator

ISO 9336-3:2020

Optics and photonics — Optical transfer function — Application — Part 3: Telescopes

ISO 9803-2:2020

Vacuum technology — Mounting dimensions of pipeline fittings — Part 2: Knife-edge flange type

ISO 14502-1:2005

Determination of substances characteristic of green and black tea — Part 1: Content of total polyphenols in tea — Colorimetric method using Folin-Ciocalteu reagent

ISO 22088-2:2006

Plastics — Determination of resistance to environmental stress cracking (ESC) — Part 2: Constant tensile load method

ISO 19144-1:2009

Geographic information — Classification systems — Part 1: Classification system structure

ISO 105-S01:1993

Textiles — Tests for colour fastness — Part S01: Colour fastness to vulcanization: Hot air

ISO 105-S02:1993

Textiles — Tests for colour fastness — Part S02: Colour fastness to vulcanization: Sulfur monochloride

ISO 10054:1998

Internal combustion compression-ignition engines — Measurement apparatus for smoke from engines operating under steady-state conditions — Filter-type smokemeter

ISO 23848-2:2009

Machine tools — Ball splines — Part 2: Dynamic and static load ratings and rating life

ISO 19289:2015

Air quality — Meteorology — Siting classifications for surface observing stations on land

ISO/IEC 19793:2015

Information technology — Open Distributed Processing — Use of UML for ODP system specifications

ISO 16408:2015

Dentistry — Oral care products — Oral rinses

ISO 23848-1:2009

Machine tools — Ball splines — Part 1: General characteristics and requirements

ISO 16409:2016

Dentistry — Oral care products — Manual interdental brushes

ISO 29941:2010

Condoms — Determination of nitrosamines migrating from natural rubber latex condoms

ISO 17076-1:2020

Leather — Determination of abrasion resistance — Part 1: Taber® method

ISO 11665-5:2020

Measurement of radioactivity in the environment — Air: radon-222 — Part 5: Continuous measurement methods of the activity concentration

ISO 11665-6:2020

Measurement of radioactivity in the environment — Air: radon-222 — Part 6: Spot measurement methods of the activity concentration

ISO 10050:2005

Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)

ISO 4606:1995

Textile glass — Woven fabric — Determination of tensile breaking force and elongation at break by the strip method

ISO 1609:2020

Vacuum technology — Dimensions of non-knife edge flanges

ISO 5661:1983

Petroleum products — Hydrocarbon liquids — Determination of refractive index

ISO 20663:2020

Ships and marine technology — Grab dredger supervisory and control systems

ISO 20662:2020

Ships and marine technology — Hopper dredger supervisory and control systems

ISO 20661:2020

Ships and marine technology — Cutter suction dredger supervisory and control systems

ISO/TS 13399-310:2017

Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with carbide tips

ISO 1306:1995

Rubber compounding ingredients — Carbon black (pelletized) — Determination of pour density

ISO 1461:2009

Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods

ISO 15184:2020

Paints and varnishes — Determination of film hardness by pencil test

ISO 3343:2010

Reinforcement yarns — Determination of twist balance index

ISO 2558:2010

Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene

ISO 1265:2007

Plastics — Poly(vinyl chloride) resins — Determination of number of impurities and foreign particles

ISO 14520-12:2015

Gaseous fire-extinguishing systems — Physical properties and system design — Part 12: IG-01 extinguishant

ISO 15473:2002

Soil quality — Guidance on laboratory testing for biodegradation of organic chemicals in soil under anaerobic conditions

ISO 105-Z01:1993

Textiles — Tests for colour fastness — Part Z01: Colour fastness to metals in the dye-bath: Chromium salts

ISO 14520-14:2015

Gaseous fire-extinguishing systems — Physical properties and system design — Part 14: IG-55 extinguishant

ISO/TS 14027:2017

Environmental labels and declarations — Development of product category rules

ISO 21801-1:2020

Cognitive accessibility — Part 1: General guidelines

ISO 11234:1995

Rubber compounding ingredients — Carbon black (pelletized) — Determination of dust content

ISO 10469:2006

Copper sulfide concentrates — Determination of copper — Electrogravimetric method

ISO 14240-1:1997

Soil quality — Determination of soil microbial biomass — Part 1: Substrate-induced respiration method

ISO 2531:2009

Ductile iron pipes, fittings, accessories and their joints for water applications

ISO 17850:2015

Photography — Digital cameras — Geometric distortion (GD) measurements

ISO 11490:2015

Jewellery — Determination of palladium in palladium jewellery alloys — Gravimetric determination with dimethylglyoxime

ISO 14240-2:1997

Soil quality — Determination of soil microbial biomass — Part 2: Fumigation-extraction method

ISO 14520-15:2015

Gaseous fire-extinguishing systems — Physical properties and system design — Part 15: IG-541 extinguishant

ISO 603-15:1999

Bonded abrasive products — Dimensions — Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines

ISO 15016:2015

Ships and marine technology — Guidelines for the assessment of speed and power performance by analysis of speed trial data

ISO/TS 23303:2020

Health informatics — Categorial structure for Chinese materiamedica products manufacturing process

ISO 18263-2:2015

Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging — Part 2: Preparation of test specimens and determination of properties

ISO 13756:2015

Jewellery — Determination of silver in silver jewellery alloys — Volumetric (potentiometric) method using sodium chloride or potassium chloride

ISO 18263-1:2015

Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging — Part 1: Designation system and basis for specification

ISO 18674-3:2017/AMD 1:2020

Geotechnical investigation and testing — Geotechnical monitoring by field instrumentation — Part 3: Measurement of displacements across a line: Inclinometers — Amendment 1

ISO 15367-2:2005

Lasers and laser-related equipment — Test methods for determination of the shape of a laser beam wavefront — Part 2: Shack-Hartmann sensors

ISO 14837-1:2005

Mechanical vibration — Ground-borne noise and vibration arising from rail systems — Part 1: General guidance

ISO 9073-14:2006

Textiles — Test methods for nonwovens — Part 14: Coverstock wetback

ISO 9211-7:2018

Optics and photonics — Optical coatings — Part 7: Minimum requirements for neutral beam splitter coatings

ISO 9022-3:2015

Optics and photonics — Environmental test methods — Part 3: Mechanical stress

ISO 9022-6:2015

Optics and photonics — Environmental test methods — Part 6: Dust

ISO 11644:2009

Leather — Test for adhesion of finish

ISO/TS 15694:2004

Mechanical vibration and shock — Measurement and evaluation of single shocks transmitted from hand-held and hand-guided machines to the hand-arm system

ISO 1138:2007

Rubber compounding ingredients — Carbon black — Determination of sulfur content

ISO 3830:1993

Petroleum products — Determination of lead content of gasoline — Iodine monochloride method

ISO 7231:2010

Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop

ISO 9073-13:2006

Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike-through time

ISO 4874:2020

Tobacco — Sampling of batches of raw material — General principles

ISO/TS 12812-2:2017

Core banking — Mobile financial services — Part 2: Security and data protection for mobile financial services

ISO/TS 12812-4:2017

Core banking — Mobile financial services — Part 4: Mobile payments-to-persons

ISO/TS 12812-3:2017

Core banking — Mobile financial services — Part 3: Financial application lifecycle management

ISO 12713:1998

Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers

ISO 21172-1:2015

Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for the transport of gases — Design and construction — Part 1: Capacities up to 1 000 litres

ISO 21404:2020

Solid biofuels — Determination of ash melting behaviour

ISO 10398:1998

Rubber — Identification of accelerators in cured and uncured compounds

ISO/TS 12812-5:2017

Core banking — Mobile financial services — Part 5: Mobile payments to businesses

ISO/TR 19234:2016

Hydrometry — Low cost baffle solution to aid fish passage at triangular profile weirs that conform to ISO 4360

ISO 9022-20:2015

Optics and photonics — Environmental test methods — Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide

ISO 603-10:1999

Bonded abrasive products — Dimensions — Part 10: Stones for honing and superfinishings

ISO 9276-5:2005

Representation of results of particle size analysis — Part 5: Methods of calculation relating to particle size analyses using logarithmic normal probability distribution

ISO 11614:1999

Reciprocating internal combustion compression-ignition engines — Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas

ISO 4073:2009

Dentistry — Information system on the location of dental equipment in the working area of the oral health care provider

ISO 3601-5:2015

Fluid power systems — O-rings — Part 5: Specification of elastomeric materials for industrial applications

ISO 3731:2003

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage

ISO 5809:1982

Starches and derived products — Determination of sulphated ash

ISO 23900-2:2015

Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling

ISO 17292:2015

Metal ball valves for petroleum, petrochemical and allied industries

ISO 23900-3:2015

Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling

ISO 14884:2015

Large yachts — Weathertight doors — Strength and weathertightness requirements

ISO 695:1991

Glass — Resistance to attack by a boiling aqueous solution of mixed alkali — Method of test and classification

ISO 1249:1974

Zinc chromate pigments — Basic zinc potassium chromate pigments and zinc tetrahydroxychromate pigments

ISO 1985:2015

Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy

ISO 1264:1980

Plastics — Homopolymer and copolymer resins of vinyl chloride — Determination of pH of aqueous extract

ISO 21980:2020

Space systems — Evaluation of radiation effects on Commercial-Off-The-Shelf (COTS) parts for use on low-orbit satellite

ISO 17469-1:2015

Document management — Strategy markup language (StratML) — Part 1: StratML core elements

ISO 9116:2004

Green coffee — Guidelines on methods of specification

ISO 19161-1:2020

Geographic information — Geodetic references — Part 1: International terrestrial reference system (ITRS)

ISO 7539-9:2003

Corrosion of metals and alloys — Stress corrosion testing — Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement

ISO 7379:1983

Hexagon socket head shoulder screws

ISO 21413:2005

Manual methods for the measurement of a groundwater level in a well

ISO 14243-1:2009/AMD 1:2020

Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test — Amendment 1

ISO 12642-2:2006

Graphic technology — Input data for characterization of 4-colour process printing — Part 2: Expanded data set

ISO 17194:2007

Structural adhesives — A standard database of properties

ISO 14243-3:2014/AMD 1:2020

Implants for surgery — Wear of total knee-joint prostheses — Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test — Amendment 1

ISO/TS 13399-50:2013

Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts

ISO/IEC 33004:2015

Information technology — Process assessment — Requirements for process reference, process assessment and maturity models

ISO/IEC 33003:2015

Information technology — Process assessment — Requirements for process measurement frameworks

ISO 6293-2:1998

Petroleum products — Determination of saponification number — Part 2: Potentiometric titration method

ISO/IEC 33002:2015

Information technology — Process assessment — Requirements for performing process assessment

ISO 105-C10:2006

Textiles — Tests for colour fastness — Part C10: Colour fastness to washing with soap or soap and soda

ISO/IEC 33001:2015

Information technology — Process assessment — Concepts and terminology

ISO 9136-2:1999

Abrasive grains — Determination of bulk density — Part 2: Microgrits

ISO 22153:2020

Electric actuators for industrial valves — General requirements

ISO 5527:2015

Cereals — Vocabulary

ISO 13967:2009

Thermoplastics fittings — Determination of ring stiffness

ISO 12017:1995

Plastics — Poly(methyl methacrylate) double- and triple-skin sheets — Test methods

ISO 11414:2009

Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

ISO 8295:1995

Plastics — Film and sheeting — Determination of the coefficients of friction

ISO 8207:1996

Gas welding equipment — Specification for hose assemblies for equipment for welding, cutting and allied processes

ISO 9018:2015

Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints

ISO 5981:2007

Rubber- or plastics-coated fabrics — Determination of resistance to combined shear flexing and rubbing

ISO 5667-15:2009

Water quality — Sampling — Part 15: Guidance on the preservation and handling of sludge and sediment samples

ISO 11727:1999

Pneumatic fluid power — Identification of ports and control mechanisms of control valves and other components

ISO 11907-3:1998

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 3: Dynamic decomposition method using a travelling furnace

ISO 11907-2:1995

Plastics — Smoke generation — Determination of the corrosivity of fire effluents — Part 2: Static method

ISO 12162:2009

Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient

ISO 15367-1:2003

Lasers and laser-related equipment — Test methods for determination of the shape of a laser beam wavefront — Part 1: Terminology and fundamental aspects

ISO 17500:2006

Aluminium oxide used for the production of primary aluminium — Determination of attrition index

ISO 10319:2015

Geosynthetics — Wide-width tensile test

ISO 9687:2015

Dentistry — Graphical symbols for dental equipment

ISO 12417-1:2015

Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 1: General requirements

ISO 6953-1:2015

Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements

ISO 20088-2:2020

Determination of the resistance to cryogenic spill of insulation materials — Part 2: Vapour exposure

ISO 4728:2003

Oil of Spanish wild marjoram (Thymus mastichina L.)

ISO 4997:2015

Cold-reduced carbon steel sheet of structural quality

ISO/ASTM 51707:2015

Guide for estimation of measurement uncertainty in dosimetry for radiation processing

ISO 22526-1:2020

Plastics — Carbon and environmental footprint of biobased plastics — Part 1: General principles

ISO 3033-4:2005

Oil of spearmint — Part 4: Scotch variety (Mentha x gracilis Sole)