ISO 8820-12:2020

Road vehicles — Fuse-links — Part 12: Fuse-links with tabs (blade type) Type N (sub miniature)

ISO/PAS 24019:2020

Simultaneous interpreting delivery platforms — Requirements and recommendations

ISO 15096:2020

Jewellery and precious metals — Determination of high purity silver — Difference method using ICP-OES

ISO 16641:2014

Measurement of radioactivity in the environment — Air — Radon 220: Integrated measurement methods for the determination of the average activity concentration using passive solid-state nuclear track detectors

ISO 15093:2020

Jewellery and precious metals — Determination of high purity gold, platinum and palladium — Difference method using ICP-OES

ISO 22514-7:2012

Statistical methods in process management — Capability and performance — Part 7: Capability of measurement processes

ISO 16254:2016

Acoustics — Measurement of sound emitted by road vehicles of category M and N at standstill and low speed operation — Engineering method

ISO 19744:2020

Test conditions for numerically controlled broaching machines — Testing of accuracy — Vertical surface type broaching machines

ISO 3669:2020

Vacuum technology — Dimensions of knife-edge flanges

ISO/IEC 17549-2:2020

Information technology — User interface guidelines on menu navigation — Part 2: Navigation with 4-direction devices

ISO 665:2020

Oilseeds — Determination of moisture and volatile matter content

ISO 13304-1:2013

Radiological protection — Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation — Part 1: General principles

ISO 16311-2:2014

Maintenance and repair of concrete structures — Part 2: Assessment of existing concrete structures

ISO 13474:2009

Acoustics — Framework for calculating a distribution of sound exposure levels for impulsive sound events for the purposes of environmental noise assessment

ISO 125:2020

Natural rubber latex concentrate — Determination of alkalinity

ISO/IEC 21471:2020

Information technology — Automatic identification and data capture techniques — Extended rectangular data matrix (DMRE) bar code symbology specification

ISO 12922:2020

Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU

ISO 20794-2:2020

Road vehicles — Clock extension peripheral interface (CXPI) — Part 2: Application layer

ISO/IEC 14764:2006

Software Engineering — Software Life Cycle Processes — Maintenance

ISO 8044:2020

Corrosion of metals and alloys — Vocabulary

ISO 21143:2020

Technical product documentation — Requirements for digital mock-up virtual assembly test for mechanical products

ISO/IEC 19516:2020

Information technology — Object management group — Interface definition language (IDL) 4.2

ISO 16874:2004

Hydraulic fluid power — Identification of manifold assemblies and their components

ISO 21178:2020

Light conveyor belts — Determination of electrical resistances

ISO 23242:2020

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for flexural strength of monolithic ceramic thin plates at room temperature by three-point or four-point bending

ISO 9863-2:1996

Geotextiles and geotextile-related products — Determination of thickness at specified pressures — Part 2: Procedure for determination of thickness of single layers of multilayer products

ISO 8820-13:2020

Road vehicles — Fuse-links — Part 13: Fuse-links with tabs (blade type) Type P (sub miniature three tabs)

ISO 16715:2014

Cranes — Hand signals used with cranes

ISO/IEC TR 24741:2018

Information technology — Biometrics — Overview and application

ISO 9241-20:2008

Ergonomics of human-system interaction — Part 20: Accessibility guidelines for information/communication technology (ICT) equipment and services

ISO 16311-1:2014

Maintenance and repair of concrete structures — Part 1: General principles

ISO 12130-2:2020

Plain bearings — Hydrodynamic plain tilting pad thrust bearings under steady-state conditions — Part 2: Functions for calculation of tilting pad thrust bearings

ISO 9606-4:1999

Approval testing of welders — Fusion welding — Part 4: Nickel and nickel alloys

ISO 16106:2020

Transport packages for dangerous goods — Dangerous goods packagings, intermediate bulk containers (IBCs) and large packagings — Guidelines for the application of ISO 9001

ISO 26021-5:2009

Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 5: Additional communication line with pulse width modulated signal

ISO 2861:2020

Vacuum technology — Dimensions of clamped-type quick-release couplings

ISO 13203:2005

Chains, sprockets and accessories — List of equivalent terms

ISO 26021-2:2008

Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 2: Communication requirements

ISO 7606:1988

Shipbuilding — Inland navigation vessels — Draught scales

ISO 26021-1:2008

Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 1: General information and use case definitions

ISO 5610-2:2014

Tool holders with rectangular shank for indexable inserts — Part 2: Style A

ISO 18526-4:2020

Eye and face protection — Test methods — Part 4: Headforms

ISO 26021-4:2009

Road vehicles — End-of-life activation of on-board pyrotechnic devices — Part 4: Additional communication line with bidirectional communication

ISO 5610-1:2014

Tool holders with rectangular shank for indexable inserts — Part 1: General survey, correlation and determination of dimensions

ISO 5610-4:2014

Tool holders with rectangular shank for indexable inserts — Part 4: Style D

ISO/TS 12828-3:2020

Validation method for fire gas analysis — Part 3: Considerations related to interlaboratory trials

ISO 6281:2020

Plain bearings — Testing under conditions of hydrodynamic and mixed lubrication in test rigs

ISO 5610-3:2014

Tool holders with rectangular shank for indexable inserts — Part 3: Style B

ISO 22313:2020

Security and resilience — Business continuity management systems — Guidance on the use of ISO 22301

ISO/IEC GUIDE 60:2004

Conformity assessment — Code of good practice

ISO 12090-1:2011

Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 1: Boundary dimensions and tolerances for series 1, 2 and 3

ISO 12090-2:2011

Rolling bearings — Profiled rail guides for linear motion rolling bearings — Part 2: Boundary dimensions and tolerances for series 4 and 5

ISO 20794-4:2020

Road vehicles — Clock extension peripheral interface (CXPI) — Part 4: Data link layer and physical layer

ISO 22426:2020

Assessment of the effectiveness of cathodic protection based on coupon measurements

ISO/TS 81060-5:2020

Non-invasive sphygmomanometers — Part 5: Requirements for the repeatability and reproducibility of NIBP simulators for testing of automated non-invasive sphygmomanometers

ISO 9241-920:2009

Ergonomics of human-system interaction — Part 920: Guidance on tactile and haptic interactions

ISO 6141:2015/AMD 1:2020

Gas analysis — Contents of certificates for calibration gas mixtures — Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017

ISO 22915-5:2014

Industrial trucks — Verification of stability — Part 5: Single-side-loading trucks

ISO 12482:2014

Cranes — Monitoring for crane design working period

ISO 4986:2020

Steel and iron castings — Magnetic particle testing

ISO 3475:2020

Essential oil of aniseed (Pimpinella anisum L.)

ISO 22396:2020

Security and resilience — Community resilience — Guidelines for information exchange between organizations

ISO 11200:2014

Acoustics — Noise emitted by machinery and equipment — Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at other specified positions

ISO 1204:1990

Reciprocating internal combustion engines — Designation of the direction of rotation and of cylinders and valves in cylinder heads, and definition of right-hand and left-hand in-line engines and locations on an engine

ISO 3220:1975

Copper and copper alloys — Determination of arsenic — Photometric method

ISO 5775-1:2014

Bicycle tyres and rims — Part 1: Tyre designations and dimensions

ISO 22078:2020

Intelligent transport systems — Bicyclist detection and collision mitigation systems (BDCMS) — Performance requirements and test procedures

ISO 7240-17:2020

Fire detection and fire alarm systems — Part 17: Transmission path isolators

ISO 13473-5:2009

Characterization of pavement texture by use of surface profiles — Part 5: Determination of megatexture

ISO 9606-1:2012

Qualification testing of welders — Fusion welding — Part 1: Steels

ISO 20794-3:2020

Road vehicles — Clock extension peripheral interface (CXPI) — Part 3: Transport and network layer

ISO 15610:2003

Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables

ISO/IEC TS 23167:2020

Information technology — Cloud computing — Common technologies and techniques

ISO 5610-11:2014

Tool holders with rectangular shank for indexable inserts — Part 11: Style R

ISO 362-2:2009

Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 2: L category

ISO 5610-10:2014

Tool holders with rectangular shank for indexable inserts — Part 10: Style N

ISO 5610-13:2014

Tool holders with rectangular shank for indexable inserts — Part 13: Style T

ISO 21903:2020

Refrigerated hydrocarbon fluids — Dynamic measurement — Requirements and guidelines for the calibration and installation of flowmeters used for liquefied natural gas (LNG) and other refrigerated hydrocarbon fluids