ISO 23953-1:2015

Refrigerated display cabinets — Part 1: Vocabulary

ISO 23953-2:2015

Refrigerated display cabinets — Part 2: Classification, requirements and test conditions

ISO 3174:1994

Aircraft — Connections for checking hydraulic systems by ground appliances — Threaded type

ISO 17138:2014

Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at room temperature — Determination of flexural strength

ISO 16122-5:2020

Agricultural and forestry machines — Inspection of sprayers in use — Part 5: Aerial spray systems

ISO/IEC 24728:2006

Information technology — Automatic identification and data capture techniques — MicroPDF417 bar code symbology specification

ISO 14696:2009

Reaction-to-fire tests — Determination of fire and thermal parameters of materials, products and assemblies using an intermediate-scale calorimeter (ICAL)

ISO 340:2013

Conveyor belts — Laboratory scale flammability characteristics — Requirements and test method

ISO 13061-7:2014

Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 7: Determination of ultimate tensile stress perpendicular to grain

ISO 13061-6:2014

Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 6: Determination of ultimate tensile stress parallel to grain

ISO 20203:2005

Carbonaceous materials used in the production of aluminium — Calcined coke — Determination of crystallite size of calcined petroleum coke by X-ray diffraction

ISO 9288:1989

Thermal insulation — Heat transfer by radiation — Physical quantities and definitions

ISO 13061-4:2014

Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 4: Determination of modulus of elasticity in static bending

ISO 13061-3:2014

Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 3: Determination of ultimate strength in static bending

ISO 13061-2:2014

Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 2: Determination of density for physical and mechanical tests

ISO 27027:2014

Aerospace — Solid-state remote power controllers — General performance requirements

ISO 22827-2:2005

Acceptance tests for Nd:YAG laser beam welding machines — Machines with optical fibre delivery — Part 2: Moving mechanism

ISO 13061-1:2014

Physical and mechanical properties of wood — Test methods for small clear wood specimens — Part 1: Determination of moisture content for physical and mechanical tests

ISO 362-1:2015

Measurement of noise emitted by accelerating road vehicles — Engineering method — Part 1: M and N categories

ISO 14960-2:2014

Tubeless tyres — Valves and components — Part 2: Clamp-in tubeless tyre valve-test method

ISO 9186-3:2014

Graphical symbols — Test methods — Part 3: Method for testing symbol referent association

ISO 14329:2003

Resistance welding — Destructive tests of welds — Failure types and geometric measurements for resistance spot, seam and projection welds

ISO 3046-1:2002

Reciprocating internal combustion engines — Performance — Part 1: Declarations of power, fuel and lubricating oil consumptions, and test methods — Additional requirements for engines for general use

ISO 11662-2:2014

Mobile cranes — Experimental determination of crane performance — Part 2: Structural competence under static loading

ISO 14960-1:2014

Tubeless tyres — Valves and components — Part 1: Test methods

ISO 15040:1999

Composites — Prepregs — Determination of gel time

ISO 10161-1:2014

Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 1: Protocol specification

ISO 7169:2014

Aerospace — Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa — Procurement specification, inch/metric

ISO 10161-2:2014

Information and documentation — Open Systems Interconnection — Interlibrary Loan Application Protocol Specification — Part 2: Protocol implementation conformance statement (PICS) proforma

ISO 9634:1994

Aerospace — Fluid systems — Dimensions of plastic protective caps and plugs

ISO 20524-1:2020

Intelligent transport systems — Geographic Data Files (GDF) GDF5.1 — Part 1: Application independent map data shared between multiple sources

ISO 6673:2003

Green coffee — Determination of loss in mass at 105 degrees C

ISO/TS 21569-4:2016

Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 4: Real-time PCR based screening methods for the detection of the P-nos and P-nos-nptII DNA sequences

ISO/TS 17902:2016

Wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for gravity drains and sewers

ISO 8107:1993

Nuclear power plants — Maintainability — Terminology

ISO 8829-2:2006

Aerospace — Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies — Part 2: Non-metallic braid

ISO 23933:2006

Aerospace — Aramid reinforced lightweight polytetrafluoroethylene (PTFE) hose assemblies, classification 135 degrees C/20 684 kPa (275 degrees F /3 000 psi) and 135 degrees C/21 000 kPa (275 degrees F/3 046 psi) — Procurement specification

ISO 11994:1997

Cranes — Availability — Vocabulary

ISO 15845:2014

Aircraft ground equipment - Boarding vehicle for persons with reduced mobility - Functional and safety requirements

ISO 16030:2001

Pneumatic fluid power — Connections — Ports and stud ends

ISO 15863:2003

Space systems — Spacecraft-to-launch-vehicle interface control document

ISO 11431:2002

Building construction — Jointing products — Determination of adhesion/cohesion properties of sealants after exposure to heat, water and artificial light through glass

ISO 9486:1991

Workplace air — Determination of vaporous chlorinated hydrocarbons — Charcoal tube/solvent desorption/gas chromatographic method

ISO 20616-2:2020

Graphic technology — File format for quality control and metadata — Part 2: Print Quality eXchange (PQX)

ISO 19379:2003

Ships and marine technology — ECS databases — Content, quality, updating and testing

ISO 6726:1988

Mopeds and motorcycles with two wheels — Masses — Vocabulary

ISO/TS 21237:2020

Nanotechnologies — Air filter media containing polymeric nanofibres — Specification of characteristics and measurement methods

ISO 10275:2007

Metallic materials — Sheet and strip — Determination of tensile strain hardening exponent

ISO 9685:1991

Iron ores — Determination of nickel and/or chromium contents — Flame atomic absorption spectrometric method

ISO 8785:1998

Geometrical Product Specification (GPS) — Surface imperfections — Terms, definitions and parameters

ISO 20283-3:2006

Mechanical vibration — Measurement of vibration on ships — Part 3: Pre-installation vibration measurement of shipboard equipment

ISO 18538:2015

Traceability of molluscan products — Specifications on the information to be recorded in farmed molluscan distribution chains

ISO 18539:2015

Traceability of molluscan products — Specifications on the information to be recorded in captured molluscan distribution chains

ISO 10432:2004

Petroleum and natural gas industries — Downhole equipment — Subsurface safety valve equipment

ISO 18537:2015

Traceability of crustacean products — Specifications on the information to be recorded in captured crustacean distribution chains

ISO 16063-1:1998

Methods for the calibration of vibration and shock transducers — Part 1: Basic concepts

ISO 12619-6:2017

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 6: Automatic valve

ISO/TS 19157-2:2016

Geographic information — Data quality — Part 2: XML schema implementation

ISO/TS 21569-5:2016

Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 5: Real-time PCR based screening method for the detection of the FMV promoter (P-FMV) DNA sequence

ISO 6780:2003

Flat pallets for intercontinental materials handling — Principal dimensions and tolerances

ISO 12619-5:2016

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 5: Manual cylinder valve

ISO 12619-4:2016

Road vehicles — Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blends fuel system components — Part 4: Check valve

ISO/TS 21569-6:2016

Horizontal methods for molecular biomarker analysis — Methods of analysis for the detection of genetically modified organisms and derived products — Part 6: Real-time PCR based screening methods for the detection of cry1Ab/Ac and Pubi-cry DNA sequences

ISO 6621-2:2020

Internal combustion engines — Piston rings — Part 2: Inspection measuring principles

ISO/IEC 24751-1:2008

Information technology — Individualized adaptability and accessibility in e-learning, education and training — Part 1: Framework and reference model

ISO 8644:2006

Motorcycles — Light-alloy wheels — Test method

ISO 14819-6:2006

Traffic and Traveller Information (TTI) — TTI messages via traffic message coding — Part 6: Encryption and conditional access for the Radio Data System — Traffic Message Channel ALERT C coding

ISO/TS 22240:2008

Road vehicles — Vehicles safety information model (VSIM)

ISO 15034:1999

Composites — Prepregs — Determination of resin flow

ISO 6445:2005

Doors — Behaviour between two different climates — Test method

ISO 6465:2009

Spices — Cumin (Cuminum cyminum L.) — Specification

ISO 8271:2005

Door leaves — Determination of the resistance to hard body impact

ISO 7176-8:2014

Wheelchairs — Part 8: Requirements and test methods for static, impact and fatigue strengths

ISO 18289:2014

Ships and marine technology — Navigation and shallow-water engineering vessels — Anchor winches

ISO 6442:2005

Door leaves — General and local flatness — Measurement method

ISO 6443:2005

Door leaves — Method for measurement of height, width, thickness and squareness

ISO 17315:2014

Petroleum products and other liquids — Ethanol — Determination of total acidity by potentiometric titration

ISO/IEC 17789:2014

Information technology — Cloud computing — Reference architecture

ISO 7654:1998

Road vehicles — Spin-on fuel filters for diesel engines — Mounting and connecting dimensions

ISO/IEC 17788:2014

Information technology — Cloud computing — Overview and vocabulary

ISO 18175:2004

Non-destructive testing — Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments

ISO 3002-3:1984

Basic quantities in cutting and grinding — Part 3: Geometric and kinematic quantities in cutting

ISO 37160:2020

Smart community infrastructure — Electric power infrastructure — Measurement methods for the quality of thermal power infrastructure and requirements for plant operations and management

ISO 5234:2005

Textile machinery and accessories — Metallic card clothing — Definitions of dimensions, types and mounting

ISO 13041-1:2020

Test conditions for numerically controlled turning machines and turning centres — Part 1: Geometric tests for machines with horizontal workholding spindle(s)

ISO 9947:2005

Textile machinery and accessories — Two-for-one twisters — Vocabulary

ISO 3046-3:2006

Reciprocating internal combustion engines — Performance — Part 3: Test measurements

ISO 8988:2006

Plastics — Phenolic resins — Determination of hexamethylenetetramine content — Kjeldahl method, perchloric acid method and hydrochloric acid method

ISO 3002-2:1982

Basic quantities in cutting and grinding — Part 2: Geometry of the active part of cutting tools — General conversion formulae to relate tool and working angles

ISO 22653:2003

Footwear — Test methods for lining and insocks — Static friction

ISO/IEC GUIDE 50:2014

Safety aspects — Guidelines for child safety in standards and other specifications

ISO 13935-2:2014

Textiles — Seam tensile properties of fabrics and made-up textile articles — Part 2: Determination of maximum force to seam rupture using the grab method

ISO 17196:2014

Dimethyl ether (DME) for fuels — Determination of impurities — Gas chromatographic method

ISO 13934-2:2014

Textiles — Tensile properties of fabrics — Part 2: Determination of maximum force using the grab method

ISO 18560-1:2014

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials by test chamber method under indoor lighting environment — Part 1: Removal of formaldehyde

ISO 10791-4:1998

Test conditions for machining centres — Part 4: Accuracy and repeatability of positioning of linear and rotary axes

ISO 10252:2020

Bases for design of structures — Accidental actions

ISO 28399:2020

Dentistry — External tooth bleaching products

ISO/TS 15530-1:2013

Geometrical product specifications (GPS) — Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement — Part 1: Overview and metrological characteristics

ISO 10791-5:1998

Test conditions for machining centres — Part 5: Accuracy and repeatability of positioning of work-holding pallets

ISO 17197:2014

Dimethyl ether (DME) for fuels — Determination of water content — Karl Fischer titration method

ISO 22174:2005

Microbiology of food and animal feeding stuffs — Polymerase chain reaction (PCR) for the detection of food-borne pathogens — General requirements and definitions

ISO 8820-1:2014

Road vehicles — Fuse-links — Part 1: Definitions and general test requirements

ISO/TS 7849-2:2009

Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 2: Engineering method including determination of the adequate radiation factor

ISO 20072:2009

Aerosol drug delivery device design verification — Requirements and test methods

ISO/TS 7849-1:2009

Acoustics — Determination of airborne sound power levels emitted by machinery using vibration measurement — Part 1: Survey method using a fixed radiation factor

ISO 22651:2002

Footwear — Test methods for insoles — Dimensional stability

ISO/TS 14048:2002

Environmental management — Life cycle assessment — Data documentation format

ISO 9424:2003

Wood-based panels — Determination of dimensions of test pieces

ISO 11486:2006

Motorcycles — Methods for setting running resistance on a chassis dynamometer

ISO 14096-2:2005

Non-destructive testing — Qualification of radiographic film digitisation systems — Part 2: Minimum requirements

ISO 7656:1993

Commercial road vehicles — Dimensional codes

ISO 14096-1:2005

Non-destructive testing — Qualification of radiographic film digitisation systems — Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control

ISO 9606-1:2012/COR 1:2012

Qualification testing of welders — Fusion welding — Part 1: Steels — Technical Corrigendum 1

ISO 35:2004

Natural rubber latex concentrate — Determination of mechanical stability

ISO 9606-2:2004

Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys

ISO/TS 15338:2020

Surface chemical analysis — Glow discharge mass spectrometry — Operating procedures

ISO 26422:2014

Petroleum and related products — Determination of shear stability of lubricating oils containing polymers — Method using a tapered roller bearing

ISO 9129:2008

Motorcycles — Measurement methods for moments of inertia

ISO 8686-4:2005

Cranes — Design principles for loads and load combinations — Part 4: Jib cranes

ISO 8130-5:1992

Coating powders — Part 5: Determination of flow properties of a powder/air mixture

ISO 8479:1986

Aerospace — "Q" clamps (centre-mounted clamps) for fluid systems — Dimensions

ISO 6773:1994

Aerospace — Fluid systems — Thermal shock testing of piping and fittings

ISO 7661:1984

Aerospace — Fluid systems — Clamp blocks for tube lines having axial alignment — Design standard and qualification testing — Metric series

ISO 5864:1993

ISO inch screw threads — Allowances and tolerances

ISO/TR 12417-2:2017

Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 2: Local regulatory information

ISO 14698-1:2003

Cleanrooms and associated controlled environments — Biocontamination control — Part 1: General principles and methods

ISO 3007:1999

Petroleum products and crude petroleum — Determination of vapour pressure — Reid method

ISO 71:2014

Cinematography — 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film — Positions and dimensions

ISO 14698-2:2003

Cleanrooms and associated controlled environments — Biocontamination control — Part 2: Evaluation and interpretation of biocontamination data

ISO/IEC 24744:2014

Software engineering — Metamodel for development methodologies

ISO 7322:2014

Composition cork — Test methods

ISO 16840-4:2009

Wheelchair seating — Part 4: Seating systems for use in motor vehicles

ISO 7832:2014

Cinematography — Photoelectric output factor of photographic-type audio-level test films — Measurement and calibration

ISO 22178:2009

Intelligent transport systems — Low speed following (LSF) systems — Performance requirements and test procedures

ISO 8254-1:2009

Paper and board — Measurement of specular gloss — Part 1: 75 degree gloss with a converging beam, TAPPI method

ISO 17328:2014

Optics and photonics — Optical materials and components — Test method for refractive index of infrared optical materials

ISO 3001:1999

Plastics — Epoxy compounds — Determination of epoxy equivalent

ISO 4010:1998

Diesel engines — Calibrating nozzle, delay pintle type

ISO 4527:2003

Metallic coatings — Autocatalytic (electroless) nickel-phosphorus alloy coatings — Specification and test methods

ISO/IEC 19763-10:2014

Information technology — Metamodel framework for interoperability (MFI) — Part 10: Core model and basic mapping

ISO 7327:1994

Plastics — Hardeners and accelerators for epoxide resins — Determination of free acid in acid anhydride

ISO 9635-5:2014

Agricultural irrigation equipment — Irrigation valves — Part 5: Control valves