ISO 105-E08:1994

Textiles — Tests for colour fastness — Part E08: Colour fastness to hot water

ISO 5251:1981

Stainless steel butt-welding fittings

ISO 105-X05:1994

Textiles — Tests for colour fastness — Part X05: Colour fastness to organic solvents

ISO 105-X04:1994

Textiles — Tests for colour fastness — Part X04: Colour fastness to mercerizing

ISO/TS 10303-332:2002

Industrial automation systems and integration — Product data representation and exchange — Part 332: Abstract test suite: Technical data packaging core information and exchange

ISO/IEC 19678:2015

Information Technology — BIOS Protection Guidelines

ISO 13878:1998

Soil quality — Determination of total nitrogen content by dry combustion ("elemental analysis")

ISO 15152:2003

Tobacco — Determination of the content of total alkaloids as nicotine — Continuous-flow analysis method

ISO 15153:2003

Tobacco — Determination of the content of reducing substances — Continuous-flow analysis method

ISO/TS 13004:2013

Sterilization of health care products — Radiation — Substantiation of selected sterilization dose: Method VDmaxSD

ISO 27668-2:2009

Gel ink ball pens and refills — Part 2: Documentary use (DOC)

ISO 105-X13:1994

Textiles — Tests for colour fastness — Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and setting

ISO 105-C07:1999

Textiles — Tests for colour fastness — Part C07: Colour fastness to wet scrubbing of pigment printed textiles

ISO 20279:2005

Soil quality — Extraction of thallium and determination by electrothermal atomic absorption spectrometry

ISO 11692:1994

Ferritic-pearlitic engineering steels for precipitation hardening from hot-working temperatures

ISO 9817:1991

Passenger cars — Engine cooling systems — Dimensions of pressure caps and their ramp seats on filler necks

ISO/TS 15453:2017

Gas cylinders — Seamless steel and aluminium-alloy gas cylinders — Evaluation of existing gas cylinders and consideration of their safe use in other jurisdictions

ISO 3936:1993

Reduction sleeves with tenon drive with external and internal 7/24 taper — Dimensions

ISO/IEC 14496-4:2004

Information technology — Coding of audio-visual objects — Part 4: Conformance testing

ISO/IEC/IEEE 60559:2011

Information technology — Microprocessor Systems — Floating-Point arithmetic

ISO 10012:2003

Measurement management systems — Requirements for measurement processes and measuring equipment

ISO 10303-514:1999

Industrial automation systems and integration — Product data representation and exchange — Part 514: Application interpreted construct: Advanced boundary representation

ISO 19150-2:2015

Geographic information — Ontology — Part 2: Rules for developing ontologies in the Web Ontology Language (OWL)

ISO 10303-512:1999

Industrial automation systems and integration — Product data representation and exchange — Part 512: Application interpreted construct: Faceted boundary representation

ISO/TS 20593:2017

Ambient air — Determination of the mass concentration of tire and road wear particles (TRWP) — Pyrolysis-GC-MS method

ISO 16720:2005

Soil quality — Pretreatment of samples by freeze-drying for subsequent analysis

ISO 9818:1991

Passenger cars — Engine cooling systems — Test methods and marking of pressure caps

ISO/IEC 19831:2015

Cloud Infrastructure Management Interface (CIMI) Model and RESTful HTTP-based Protocol — An Interface for Managing Cloud Infrastructure

ISO 8177:2015

Aerospace — Omega clamps (saddle clamps) for fluid systems — Dimensions

ISO 12891-1:2015

Retrieval and analysis of surgical implants — Part 1: Retrieval and handling

ISO 15701:2015

Leather — Tests for colour fastness — Colour fastness to migration into polymeric material

ISO 18197:2015

Space systems — Space based services requirements for centimetre class positioning

ISO 15517:2003

Tobacco — Determination of nitrate content — Continuous-flow analysis method

ISO 15865:2005

Space systems — Qualification assessment

ISO 16560:2015

Surface active agents — Determination of polyethylene glycol content in nonionic ethoxylated surfactants — HPLC method

ISO 4087:2005

Micrographics — Microfilming of newspapers for archival purposes on 35 mm microfilm

ISO 15253:2000

Ophthalmic optics and instruments — Optical devices for enhancing low vision

ISO 3823-2:2003

Dentistry — Rotary bur instruments — Part 2: Finishing burs

ISO 8901:2003

Oil of bitter orange petitgrain, cultivated (Citrus aurantium L.)

ISO 9098-2:1994

Bunk beds for domestic use — Safety requirements and tests — Part 2: Test methods

ISO 9098-1:1994

Bunk beds for domestic use — Safety requirements and tests — Part 1: Safety requirements

ISO 8088:1994

Equipment for olive cultivation and olive oil production — Vocabulary

IEC 60601-2-52:2009

Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds

ISO 16853:2010

Textile machinery — Sliver cans, rectangular — Main dimensions and tolerances

ISO 17972-1:2015

Graphic technology — Colour data exchange format — Part 1: Relationship to CxF3 (CxF/X)

ISO 3117:1977

Tangential keys and keyways

ISO 6199:2005

Micrographics — Microfilming of documents on 16 mm and 35 mm silver-gelatin type microfilm — Operating procedures

ISO 4969:2015

Steel — Etching method for macroscopic examination

ISO 6495-1:2015

Animal feeding stuffs — Determination of water-soluble chlorides content — Part 1: Titrimetric method

ISO 10889-8:1997

Tool holders with cylindrical shank — Part 8: Type Z, accessories

ISO 9117-3:2010

Paints and varnishes — Drying tests — Part 3: Surface-drying test using ballotini

ISO/TS 16610-32:2009

Geometrical product specifications (GPS) — Filtration — Part 32: Robust profile filters: Spline filters

ISO 8351-1:1994

Packaging — Method of specification for sacks — Part 1: Paper sacks

ISO 22077-1:2015

Health informatics — Medical waveform format — Part 1: Encoding rules

ISO 6444:2005

Door leaves — Determination of the behaviour under humidity variations in successive uniform climates

ISO 11898-3:2006

Road vehicles — Controller area network (CAN) — Part 3: Low-speed, fault-tolerant, medium-dependent interface

ISO 14556:2015

Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method

ISO 3672-2:2000

Plastics — Unsaturated-polyester resins (UP-R) — Part 2: Preparation of test specimens and determination of properties

ISO 17447-2:2015

Road Vehicles — Glow-plugs with conical seating and their cylinder head housing — Part 2: Basic characteristics and dimensions for ceramic-sheath-type glow-plugs

ISO 18490:2015

Non-destructive testing — Evaluation of vision acuity of NDT personnel

ISO/IEC 11695-1:2015

Identification cards — Optical memory cards — Holographic recording method — Part 1: Physical characteristics

ISO/IEC 21989:2002

Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Specification, functional model and information flows — Short message service

ISO 17296-3:2014

Additive manufacturing — General principles — Part 3: Main characteristics and corresponding test methods

ISO 19045:2015

Ophthalmic optics — Contact lens care products — Method for evaluating Acanthamoeba encystment by contact lens care products

ISO 11354-2:2015

Advanced automation technologies and their applications — Requirements for establishing manufacturing enterprise process interoperability — Part 2: Maturity model for assessing enterprise interoperability

ISO/TS 19046-1:2017

Cheese — Determination of propionic acid level by chromatography — Part 1: Method by gas chromatography

ISO/TS 19046-2:2017

Cheese — Determination of propionic acid level by chromatography — Part 2: Method by ion exchange chromatography

ISO 15118-3:2015

Road vehicles — Vehicle to grid communication interface — Part 3: Physical and data link layer requirements

ISO/TS 13399-302:2013

Cutting tool data representation and exchange — Part 302: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of solid drills and countersinking tools

ISO/TS 13399-301:2013

Cutting tool data representation and exchange — Part 301: Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies

ISO 18249:2015

Non-destructive testing — Acoustic emission testing — Specific methodology and general evaluation criteria for testing of fibre-reinforced polymers

ISO 9957-3:1997

Fluid draughting media — Part 3: Water-based coloured draughting inks — Requirements and test conditions

ISO 20848-2:2006

Packaging — Plastics drums — Part 2: Non-removable head (tight head) drums with a nominal capacity of 208,2 l and 220 l

ISO 18129:2015

Condition monitoring and diagnostics of machines — Approaches for performance diagnosis

ISO 18629-44:2006

Industrial automation systems and integration — Process specification language — Part 44: Definitional extension: Resource extensions

ISO 17316:2015

Information and documentation — International standard link identifier (ISLI)

ISO 20848-1:2006

Packaging — Plastics drums — Part 1: Removable head (open head) drums with a nominal capacity of 113,6 l to 220 l

ISO/IEC 15149-2:2015

Information technology — Telecommunications and information exchange between systems — Magnetic field area network (MFAN) — Part 2: In-band Control Protocol for Wireless Power Transfer

ISO 18629-42:2006

Industrial automation systems and integration — Process specification language — Part 42: Definitional extension: Temporal and state extensions

ISO 14255:1998

Soil quality — Determination of nitrate nitrogen, ammonium nitrogen and total soluble nitrogen in air-dry soils using calcium chloride solution as extractant

ISO 9241-392:2015

Ergonomics of human-system interaction — Part 392: Ergonomic recommendations for the reduction of visual fatigue from stereoscopic images

ISO 17319:2015

Fertilizers and soil conditioners — Determination of water-soluble potassium content — Potassium tetraphenylborate gravimetric method

ISO 3977-7:2002

Gas turbines — Procurement — Part 7: Technical information

ISO 17318:2015

Fertilizers and soil conditioners — Determination of arsenic, cadmium, chromium, lead and mercury contents

ISO 3689:1983

Paper and board — Determination of bursting strength after immersion in water

ISO/IEC 17021-1:2015

Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements

ISO 389-5:2006

Acoustics — Reference zero for the calibration of audiometric equipment — Part 5: Reference equivalent threshold sound pressure levels for pure tones in the frequency range 8 kHz to 16 kHz

ISO 17224:2015

Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by application of a deposit of salt, ash, or other substances

ISO 18458:2015

Biomimetics — Terminology, concepts and methodology

ISO 17786:2015

Dimethyl ether (DME) for fuels — Determination of high temperature (105°C) evaporation residues — Mass analysis method

ISO/IEC/IEEE 15288:2015

Systems and software engineering — System life cycle processes

ISO 18459:2015

Biomimetics — Biomimetic structural optimization

ISO 18629-14:2006

Industrial automation systems and integration — Process specification language — Part 14: Resource theories

ISO 18215:2015

Ships and marine technology — Vessel machinery operations in polar waters — Guidelines

ISO 17198:2014

Dimethyl ether (DME) for fuels — Determination of total sulfur, ultraviolet fluorescence method

ISO 18629-13:2006

Industrial automation systems and integration — Process specification language — Part 13: Duration and ordering theories

ISO 80369-20:2015

Small-bore connectors for liquids and gases in healthcare applications — Part 20: Common test methods

ISO 10816-21:2015

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 21: Horizontal axis wind turbines with gearbox

ISO 16954:2015

Dentistry — Test methods for dental unit waterline biofilm treatment

ISO 16948:2015

Solid biofuels — Determination of total content of carbon, hydrogen and nitrogen

ISO 7-1:1994

Pipe threads where pressure-tight joints are made on the threads — Part 1: Dimensions, tolerances and designation

ISO/IEC 29167-12:2015

Information technology — Automatic identification and data capture techniques — Part 12: Crypto suite ECC-DH security services for air interface communications

ISO/IEC 29167-13:2015

Information technology — Automatic identification and data capture techniques — Part 13: Crypto suite Grain-128A security services for air interface communications

IEC 80601-2-35:2009

Medical electrical equipment — Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use

ISO 9958-2:1992

Draughting media for technical drawings — Draughting film with polyester base — Part 2: Determination of properties

ISO 9959-1:1992

Numerically controlled draughting machines — Drawing test for the evaluation of performance — Part 1: Vector plotters

ISO 9960-1:1992

Draughting instruments with or without graduation — Part 1: Draughting scale rules

ISO 9073-3:1989

Textiles — Test methods for nonwovens — Part 3: Determination of tensile strength and elongation

ISO 9245:1991

Earth-moving machinery — Machine productivity — Vocabulary, symbols and units

ISO 6770:1982

Instant tea — Determination of free-flow and compacted bulk densities

ISO 9073-1:1989

Textiles — Test methods for nonwovens — Part 1: Determination of mass per unit area

ISO 9242:1988

Pliers and nippers — Construction worker's pincers — Dimensions and test values

ISO 9771:1995

Plastics — Phenolic resins — Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions

ISO/IEC 15056:1997

Information technology — Telecommunications and information exchange between systems — Private Integrated Services Network — Inter-exchange signalling protocol — Transit counter additional network feature

ISO 17322:2015

Fertilizers and soil conditioners — Analytical methods for Sulfur Coated Urea (SCU)

ISO 18218-1:2015

Leather — Determination of ethoxylated alkylphenols — Part 1: Direct method

ISO 17323:2015

Fertilizers and soil conditioners — Sulfur Coated Urea (SCU) — General requirements

ISO 3006:2015

Road vehicles — Passenger car wheels for road use — Test methods

ISO 10816-6:1995

Mechanical vibration — Evaluation of machine vibration by measurements on non-rotating parts — Part 6: Reciprocating machines with power ratings above 100 kW

ISO 13846:2000

Plastics piping systems — End-load-bearing and non-end-load-bearing assemblies and joints for thermoplastics pressure piping — Test method for long-term leaktightness under internal water pressure

ISO 13628-9:2000

Petroleum and natural gas industries — Design and operation of subsea production systems — Part 9: Remotely Operated Tool (ROT) intervention systems

ISO 8130-4:1992

Coating powders — Part 4: Calculation of lower explosion limit

ISO 9961:1992

Draughting media for technical drawings — Natural tracing paper

ISO 9962-1:1992

Manually operated draughting machines — Part 1: Definitions, classification and designation

ISO 9962-2:1992

Manually operated draughting machines — Part 2: Characteristics, performance, inspection and marking

ISO 17248:2015

Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by embedding in salt, ash, or other solids

ISO 18558:2015

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining elastic modulus and bending strength of ceramic tube and rings

ISO 17245:2015

Corrosion of metals and alloys — Test method for high temperature corrosion testing of metallic materials by immersing in molten salt or other liquids under static conditions

ISO 9735-10:2014

Electronic data interchange for administration, commerce and transport (EDIFACT) — Application level syntax rules (Syntax version number: 4, Syntax release number: 2) — Part 10: Syntax service directories

ISO 11660-2:2015

Cranes — Access, guards and restraints — Part 2: Mobile cranes

ISO 3977-5:2001

Gas turbines — Procurement — Part 5: Applications for petroleum and natural gas industries

ISO 9776:1999

Oil of Mentha arvensis, partially dementholized (Mentha arvensis L. var. piperascens Malinv. and var. glabrata Holmes)

ISO 24500:2010

Ergonomics — Accessible design — Auditory signals for consumer products