ISO 24338:2014

Laminate floor coverings — Determination of abrasion resistance

ISO/IEC 10779:2020

Information technology — Office equipment — Accessibility guidelines for older persons and persons with disabilities

ISO 12749-1:2020

Nuclear energy — Vocabulary — Part 1: General terminology

ISO/IEC 29199-2:2020

Information technology — JPEG XR image coding system — Part 2: Image coding specification

ISO 13910:2014

Timber structures — Strength graded timber — Test methods for structural properties

ISO 9028:2006

Rubber — Dissolution by acid digestion

ISO/HL7 21731:2014

Health informatics — HL7 version 3 — Reference information model — Release 4

ISO 6182-16:2020

Fire protection — Automatic sprinkler systems — Part 16: Requirements and test methods for fire pump relief valves

ISO/TR 14799-1:2015

Comparison of worldwide escalator and moving walk safety standards — Part 1: Rule by rule comparison

ISO 20049-1:2020

Solid biofuels — Determination of self-heating of pelletized biofuels — Part 1: Isothermal calorimetry

ISO 3376:2020

Leather — Physical and mechanical tests — Determination of tensile strength and percentage elongation

ISO 22888:2020

Railway applications — Concepts and basic requirements for the planning of railway operation in the event of earthquakes

ISO/IEC 11801-9908:2020

Information technology — Generic cabling systems for customer premises — Part 9908: Title missing

ISO 31022:2020

Risk management — Guidelines for the management of legal risk

ISO 6310:2009

Road vehicles — Brake linings — Compressive strain test methods

ISO/TR 14799-2:2015

Comparison of worldwide escalator and moving walk safety standards — Part 2: Abbreviated comparison and comments

ISO 12960:2020

Geotextiles and geotextile-related products — Screening test methods for determining the resistance to acid and alkaline liquids

ISO 15528:2020

Paints, varnishes and raw materials for paints and varnishes — Sampling

ISO 21151:2020

In vitro diagnostic medical devices — Requirements for international harmonisation protocols establishing metrological traceability of values assigned to calibrators and human samples

ISO 3547-7:2020

Plain bearings — Wrapped bushes — Part 7: Measurement of wall thickness of thin-walled bushes

ISO 3547-6:2020

Plain bearings — Wrapped bushes — Part 6: Checking the inside diameter

ISO 3547-5:2020

Plain bearings — Wrapped bushes — Part 5: Checking the outside diameter

ISO/TR 10134:2020

Small craft — Electrical devices — Established practices for the design, construction and installation of lightning-protection systems

ISO 10962:2019

Securities and related financial instruments — Classification of financial instruments (CFI) code

ISO 14624-2:2003

Space systems — Safety and compatibility of materials — Part 2: Determination of flammability of electrical-wire insulation and accessory materials

ISO 14624-3:2005

Space systems — Safety and compatibility of materials — Part 3: Determination of offgassed products from materials and assembled articles

ISO 23309:2020

Hydraulic fluid power systems — Assembled systems — Methods of cleaning lines by flushing

ISO 14624-1:2003

Space systems — Safety and compatibility of materials — Part 1: Determination of upward flammability of materials

ISO 22744-1:2020

Textiles and textile products — Determination of organotin compounds — Part 1: Derivatisation method using gas chromatography

ISO 8761:1989

Work-place air — Determination of mass concentration of nitrogen dioxide — Method using detector tubes for short-term sampling with direct indication

ISO 4136:2012

Destructive tests on welds in metallic materials — Transverse tensile test

ISO 8760:1990

Work-place air — Determination of mass concentration of carbon monoxide — Method using detector tubes for short-term sampling with direct indication

ISO 9016:2012

Destructive tests on welds in metallic materials — Impact tests — Test specimen location, notch orientation and examination

ISO 4787:2010

Laboratory glassware — Volumetric instruments — Methods for testing of capacity and for use

ISO 8788:2020

Aerospace — Nuts, metric — Tolerances of form and position

ISO/TR 23244:2020

Blockchain and distributed ledger technologies — Privacy and personally identifiable information protection considerations

ISO 20566:2020

Paints and varnishes — Determination of the scratch resistance of a coating system using a laboratory-scale car-wash

ISO 13547-1:2014

Copper, lead, zinc and nickel sulfide concentrates — Determination of arsenic — Part 1: Iron hydroxide concentration and inductively coupled plasma atomic emission spectrometric method

ISO 7886-3:2020

Sterile hypodermic syringes for single use — Part 3: Auto-disabled syringes for fixed-dose immunization

ISO 22418:2020

Intelligent transport systems — Fast service announcement protocol (FSAP) for general purposes in ITS

ISO 9564-1:2017

Financial services — Personal Identification Number (PIN) management and security — Part 1: Basic principles and requirements for PINs in card-based systems

ISO 18778:2005

Respiratory equipment — Infant monitors — Particular requirements

ISO 16900-7:2020

Respiratory protective devices — Methods of test and test equipment — Part 7: Practical performance test methods

ISO 23458:2020

Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for determining thermal expansion coefficient and residual stress of CVD ceramic coatings

ISO/TR 22696:2020

Health informatics — Guidance on the identification and authentication of connectable Personal Healthcare Devices (PHDs)

ISO 17115:2020

Health informatics — Representation of categorial structures of terminology (CatStructure)

ISO 10442:2002

Petroleum, chemical and gas service industries — Packaged, integrally geared centrifugal air compressors

ISO 14955-5:2020

Machine tools — Environmental evaluation of machine tools — Part 5: Principles for testing woodworking machine tools with respect to energy supplied

ISO 6194-2:2009

Rotary shaft lip-type seals incorporating elastomeric sealing elements — Part 2: Vocabulary

ISO/TS 13725:2016

Hydraulic fluid power — Method for evaluating the buckling load of a hydraulic cylinder

ISO 13547-2:2014

Copper, lead, zinc and nickel sulfide concentrates — Determination of arsenic — Part 2: Acid digestion and inductively coupled plasma atomic emission spectrometric method

ISO/IEC 17050-1:2004

Conformity assessment — Supplier's declaration of conformity — Part 1: General requirements

ISO 5359:2014

Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases

ISO 8566-3:2010

Cranes — Cabins and control stations — Part 3: Tower cranes

ISO 8574:2004

Aerospace — Hydraulic system tubing — Qualification tests for bent tubes

ISO 7752-1:2010

Cranes — Control layout and characteristics — Part 1: General principles

ISO 7870-3:2020

Control charts — Part 3: Acceptance control charts

ISO 18274:2010

Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys — Classification

ISO 11471:1995

Agricultural tractors and machinery — Coding of remote hydraulic power services and controls

ISO/TS 19844:2018

Health informatics — Identification of medicinal products (IDMP) — Implementation guidelines for ISO 11238 for data elements and structures for the unique identification and exchange of regulated information on substances

ISO 22951:2009

Data dictionary and message sets for preemption and prioritization signal systems for emergency and public transport vehicles (PRESTO)

ISO 9241-394:2020

Ergonomics of human-system interaction — Part 394: Ergonomic requirements for reducing undesirable biomedical effects of visually induced motion sickness during watching electronic images

ISO 4531:2018

Vitreous and porcelain enamels — Release from enamelled articles in contact with food — Methods of test and limits

ISO 10766:2014

Hydraulic fluid power — Cylinders — Housing dimensions for rectangular-section-cut bearing rings for pistons and rods

ISO 13385-2:2020

Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 2: Design and metrological characteristics of calliper depth gauges

ISO 4363:2002

Measurement of liquid flow in open channels — Methods for measurement of characteristics of suspended sediment

ISO 10791-3:1998

Test conditions for machining centres — Part 3: Geometric tests for machines with integral indexable or continuous universal heads (vertical Z -axis)

ISO 7876-5:2004

Fuel injection equipment — Vocabulary — Part 5: Common rail fuel injection system

ISO 2137:2020

Petroleum products and lubricants — Determination of cone penetration of lubricating greases and petrolatum

ISO 23676:2020

Rough-terrain trucks — Operator training — Content and methods

ISO 8032:1997

Rubber and plastics hose assemblies — Flexing combined with hydraulic impulse test (half-omega test)

ISO 128-1:2020

Technical product documentation (TPD) — General principles of representation — Part 1: Introduction and fundamental requirements

ISO 22244:2020

Leather — Raw hides — Guidelines for preservation of hides

ISO 21299:2009

Powered ride-on turf care equipment — Roll-over protective structures (ROPS) — Test procedures and acceptance criteria

ISO 18309:2014

Ships and marine technology — Incinerator sizing and selection — Guidelines

ISO 14708-5:2020

Implants for surgery — Active implantable medical devices — Part 5: Circulatory support devices

ISO 26782:2009

Anaesthetic and respiratory equipment — Spirometers intended for the measurement of time forced expired volumes in humans

ISO 16900-14:2020

Respiratory protective devices — Methods of test and test equipment — Part 14: Measurement of sound pressure level

ISO 1242:1999

Essential oils — Determination of acid value

ISO/TS 13399-2:2014

Cutting tool data representation and exchange — Part 2: Reference dictionary for the cutting items

ISO 26303:2012

Machine tools — Short-term capability evaluation of machining processes on metal-cutting machine tools

ISO 10968:2020

Earth-moving machinery — Operator's controls

ISO/TS 13399-3:2014

Cutting tool data representation and exchange — Part 3: Reference dictionary for tool items