ISO 18872:2007

Plastics — Determination of tensile properties at high strain rates

ISO 11857:1999

Textile floor coverings — Determination of resistance to delamination

ISO 17454:2006

Plastics piping systems — Multilayer pipes — Test method for the adhesion of the different layers using a pulling rig

ISO 19144-2:2012

Geographic information - Classification systems — Part 2: Land Cover Meta Language (LCML)

ISO 1694:1976

Cryolite, natural and artificial — Determination of iron content — 1,10- Phenanthroline photometric method

ISO 105-B02:2014

Textiles — Tests for colour fastness — Part B02: Colour fastness to artificial light: Xenon arc fading lamp test

ISO 17499:2006

Carbonaceous materials used in the production of aluminium — Determination of baking level expressed by equivalent temperature

ISO 5678:1993

Agricultural machinery — Equipment for working the soil — S-tines: main dimensions and clearance zones

ISO 14085-3:2015

Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity

ISO 14085-2:2015

Aerospace series — Hydraulic filter elements — Test methods — Part 2: Conditioning

ISO 14085-1:2015

Aerospace series — Hydraulic filter elements — Test methods — Part 1: Test sequence

ISO 2773-2:1973

Test conditions for pillar type vertical drilling machines — Testing of the accuracy — Part 2: Practical test

ISO 2773-1:1973

Test conditions for pillar type vertical drilling machines — Testing of the accuracy — Part 1: Geometrical tests

ISO 14085-6:2015

Aerospace series — Hydraulic filter elements — Test methods — Part 6: Initial cleanliness level

ISO 19679:2020

Plastics — Determination of aerobic biodegradation of non-floating plastic materials in a seawater/sediment interface — Method by analysis of evolved carbon dioxide

ISO 14085-5:2015

Aerospace series — Hydraulic filter elements — Test methods — Part 5: Resistance to flow fatigue

ISO 14085-4:2015

Aerospace series — Hydraulic filter elements — Test methods — Part 4: Verification of collapse/burst pressure rating

ISO 6993-1:2006

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)

ISO 5381:1983

Starch hydrolysis products — Determination of water content — Modified Karl Fischer method

ISO 6993-2:2006

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)

ISO 14505-3:2006

Ergonomics of the thermal environment — Evaluation of thermal environments in vehicles — Part 3: Evaluation of thermal comfort using human subjects

ISO 6993-3:2006

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)

ISO 6993-4:2006

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 4: Code of practice for design, handling and installation

ISO 1693:1976

Cryolite, natural and artificial — Determination of fluorine content — Modified Willard-Winter method

ISO 13954:1997

Plastics pipes and fittings — Peel decohesion test for polyethylene (PE) electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm

ISO 105-B01:2014

Textiles — Tests for colour fastness — Part B01: Colour fastness to light: Daylight

ISO 6123-1:2015

Rubber or plastics covered rollers — Specifications — Part 1: Requirements for hardness

ISO 14707:2015

Surface chemical analysis — Glow discharge optical emission spectrometry (GD-OES) — Introduction to use

ISO 19242:2015

Rubber — Determination of total sulfur content by ion chromatography

ISO 17804:2020

Founding — Ausferritic spheroidal graphite cast irons — Classification

ISO 6123-2:2015

Rubber or plastics covered rollers — Specifications — Part 2: Surface characteristics

ISO 24153:2009

Random sampling and randomization procedures

ISO 6603-1:2000

Plastics — Determination of puncture impact behaviour of rigid plastics — Part 1: Non-instrumented impact testing

ISO 12175:1994

Space data and information transfer systems — Standard formatted data units — Structure and construction rules

ISO 10110-6:2015

Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances

ISO 13041-5:2015

Test conditions for numerically controlled turning machines and turning centres — Part 5: Accuracy of speeds and interpolations

ISO 9848:2003

Photography — Source document microfilms — Determination of ISO speed and ISO average gradient

ISO 2240:2003

Photography — Colour reversal camera films — Determination of ISO speed

ISO 2039-1:2001

Plastics — Determination of hardness — Part 1: Ball indentation method

ISO 6141:2015

Gas analysis — Contents of certificates for calibration gas mixtures

ISO 17228:2015

Leather — Tests for colour fastness — Change in colour with accelerated ageing

ISO 13428:2005

Geosynthetics — Determination of the protection efficiency of a geosynthetic against impact damage

ISO 8083:2006

Machinery for forestry — Falling-object protective structures (FOPS) — Laboratory tests and performance requirements

ISO 28927-3:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 3: Polishers and rotary, orbital and random orbital sanders

ISO 28007-1:2015

Ships and marine technology — Guidelines for Private Maritime Security Companies (PMSC) providing privately contracted armed security personnel (PCASP) on board ships (and pro forma contract) — Part 1: General

ISO 15193:2009

In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for content and presentation of reference measurement procedures

ISO 15194:2009

In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for certified reference materials and the content of supporting documentation

ISO 26482:2010

Hardmetals — Determination of lead and cadmium content

ISO 9112:2008

Truck and bus tyres — Methods of measuring tyre rolling circumference — Loaded new tyres

ISO 5053-1:2020

Industrial trucks — Vocabulary — Part 1: Types of industrial trucks

ISO 4209-1:2001

Truck and bus tyres and rims (metric series) — Part 1: Tyres

ISO/IEC 30121:2015

Information technology — Governance of digital forensic risk framework

ISO 182-3:1993

Plastics — Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures — Part 3: Conductometric method

ISO 11120:2015

Gas cylinders — Refillable seamless steel tubes of water capacity between 150 l and 3000 l — Design, construction and testing

ISO 16396-1:2015

Plastics — Polyamide (PA) moulding and extrusion materials — Part 1: Designation system, marking of products and basis for specifications

ISO 7229:2015

Rubber- or plastics-coated fabrics — Measurement of gas permeability

ISO 11118:2015

Gas cylinders — Non-refillable metallic gas cylinders — Specification and test methods

ISO 5208:2015

Industrial valves — Pressure testing of metallic valves

ISO 9022-12:2015

Optics and photonics — Environmental test methods — Part 12: Contamination

ISO 2062:2009

Textiles — Yarns from packages — Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester

ISO 10109:2015

Optics and photonics — Guidance for the selection of environmental tests

ISO 11436:1993

Nickel and nickel alloys — Determination of total boron content — Curcumin molecular absorption spectrometric method

ISO 9022-14:2015

Optics and photonics — Environmental test methods — Part 14: Dew, hoarfrost, ice

ISO/HL7 27951:2009

Health informatics — Common terminology services, release 1

ISO 3046-4:2009

Reciprocating internal combustion engines — Performance — Part 4: Speed governing

ISO 16757-1:2015

Data structures for electronic product catalogues for building services — Part 1: Concepts, architecture and model

ISO 13426-2:2005

Geotextiles and geotextile-related products — Strength of internal structural junctions — Part 2: Geocomposites

ISO 18413:2015

Hydraulic fluid power — Cleanliness of components — Inspection document and principles related to contaminant extraction and analysis, and data reporting

ISO 5377:1981

Starch hydrolysis products — Determination of reducing power and dextrose equivalent — Lane and Eynon constant titre method

ISO 16833:2006

Road vehicles — Wheels — Measurement of radial and lateral run-out

ISO 4530:1983

Vitreous and porcelain enamelled manufactured articles — Determination of resistance to heat

ISO 21503:2017

Project, programme and portfolio management — Guidance on programme management

ISO/IEC 27039:2015

Information technology — Security techniques — Selection, deployment and operations of intrusion detection and prevention systems (IDPS)

ISO 6133:2015

Rubber and plastics — Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength

ISO 14269-3:1997

Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 3: Determination of effect of solar heating

ISO 16067-1:2003

Photography — Spatial resolution measurements of electronic scanners for photographic images — Part 1: Scanners for reflective media

ISO 13480:1997

Polyethylene pipes — Resistance to slow crack growth — Cone test method

ISO 105-B06:2020

Textiles — Tests for colour fastness — Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test

ISO 6505:2015

Rubber, vulcanized or thermoplastic — Determination of tendency to adhere to and corrode metals

ISO/TS 289-4:2017

Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 4: Determination of the Mooney stress-relaxation rate

ISO 1136:2015

Wool — Determination of mean diameter of fibres — Air permeability method

ISO 34-2:2015

Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 2: Small (Delft) test pieces

ISO 34-1:2015

Rubber, vulcanized or thermoplastic — Determination of tear strength — Part 1: Trouser, angle and crescent test pieces

ISO 18473-2:2015

Functional pigments and extenders for special applications — Part 2: Nanoscale titanium dioxide for sunscreen application

ISO 12647-5:2015

Graphic technology — Process control for the manufacture of half-tone colour separations, proof and production prints — Part 5: Screen printing

ISO 17258:2015

Statistical methods — Six Sigma — Basic criteria underlying benchmarking for Six Sigma in organisations

ISO 11452-7:2003

Road vehicles — Component test methods for electrical disturbances from narrowband radiated electromagnetic energy — Part 7: Direct radio frequency (RF) power injection

ISO 1741:1980

Dextrose — Determination of loss in mass on drying — Vacuum oven method

ISO 1742:1980

Glucose syrups — Determination of dry matter — Vacuum oven method

ISO 2374:1983

Lifting appliances — Range of maximum capacities for basic models

ISO 3408-3:2006

Ball screws — Part 3: Acceptance conditions and acceptance tests

ISO 3186:2008

Aerospace — Bolts, large bihexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes 1 250 MPa to 1 800 MPa — Dimensions

ISO 9405:2015

Textile floor coverings — Assessment of changes in appearance

ISO 6259-1:2015

Thermoplastics pipes — Determination of tensile properties — Part 1: General test method

ISO 3193:2008

Aerospace — Bolts, normal hexagonal head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions

ISO 5856:2008

Aerospace — Screws, 100 degrees normal countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions

ISO 1833-2:2020

Textiles — Quantitative chemical analysis — Part 2: Ternary fibre mixtures

ISO 1833-1:2020

Textiles — Quantitative chemical analysis — Part 1: General principles of testing

ISO 13921:2008

Aerospace — Screws, 100 degrees reduced countersunk head, internal offset cruciform ribbed or unribbed drive, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions

ISO 5857:2008

Aerospace — Bolts, with MJ threads, made of alloy steel, strength class 1 250 MPa — Procurement specification

ISO 9867:2009

Textiles — Evaluation of the wrinkle recovery of fabrics — Appearance method

ISO/IEC 24713-3:2009

Information technology — Biometric profiles for interoperability and data interchange — Part 3: Biometrics-based verification and identification of seafarers

ISO 1926:2009

Rigid cellular plastics — Determination of tensile properties

ISO 18352:2009

Carbon-fibre-reinforced plastics — Determination of compression-after-impact properties at a specified impact-energy level

ISO 4602:2010

Reinforcements — Woven fabrics — Determination of number of yarns per unit length of warp and weft

ICS :

 

ISO 3159:2009

Timekeeping instruments — Wrist-chronometers with spring balance oscillator

ISO 3375:2009

Textile glass — Determination of stiffness of rovings

ISO 1182:2020

Reaction to fire tests for products — Non-combustibility test

ISO 23794:2015

Rubber, vulcanized or thermoplastic — Abrasion testing — Guidance

ISO 10762:2015

Hydraulic fluid power — Mounting dimensions for cylinders, 10 MPa (100 bar) series

ISO 4528:2015

Vitreous and porcelain enamel finishes — Guide to selection of test methods for vitreous and porcelain enamelled areas of articles

ISO 13468-2:1999

Plastics — Determination of the total luminous transmittance of transparent materials — Part 2: Double-beam instrument

ISO/TS 21522:2017

Rubber process fumes components — Quantitative test methods

ISO 16620-1:2015

Plastics — Biobased content — Part 1: General principles

ISO 15463:2003

Petroleum and natural gas industries — Field inspection of new casing, tubing and plain-end drill pipe

ISO 9255:2008

Aerospace — Bolts, normal spline head, normal shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions

ISO 16620-3:2015

Plastics — Biobased content — Part 3: Determination of biobased synthetic polymer content

ISO 13802:2015

Plastics — Verification of pendulum impact-testing machines — Charpy, Izod and tensile impact-testing

ISO/IEC TS 20071-25:2017

Information technology — User interface component accessibility — Part 25: Guidance on the audio presentation of text in videos, including captions, subtitles and other on-screen text

ISO 1012:1998

Photography — Films in sheets and rolls for general use — Dimensions

ISO 9138:2015

Abrasive grains — Sampling and splitting

ISO 17742:2015

Energy efficiency and savings calculation for countries, regions and cities

ISO 4395:2009

Fluid power systems and components — Cylinder piston rod end types and dimensions

ISO 28927-2:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 2: Wrenches, nutrunners and screwdrivers

ISO 518:2006

Photography — Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash units — Specification

ISO 12853:2015

Microscopes — Information provided to the user

ISO 19084:2015

Photography — Digital cameras — Chromatic displacement measurements

ISO 18383:2015

Photography — Digital cameras — Specification guideline

ISO 1248:2006

Iron oxide pigments — Specifications and methods of test

ISO 10406-1:2015

Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 1: FRP bars and grids

ISO 10406-2:2015

Fibre-reinforced polymer (FRP) reinforcement of concrete — Test methods — Part 2: FRP sheets

ISO 2532:1974

Steel wire ropes — Vocabulary

ISO 17599:2015

Technical product documentation (TPD) — General requirements of digital mock-up for mechanical products

ISO 17070:2015

Leather — Chemical tests — Determination of tetrachlorophenol-, trichlorophenol-, dichlorophenol-, monochlorophenol-isomers and pentachlorophenol content

ISO 4142:2002

Laboratory glassware — Test tubes

ISO 14137:2015

Test conditions for wire electrical-discharge machines (wire EDM) — Testing of the accuracy

ISO 3146:2000

Plastics — Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods

ISO 8460:1987

Instant coffee — Determination of free-flow and compacted bulk densities

ISO 6939:1988

Textiles — Yarns from packages — Method of test for breaking strength of yarn by the skein method

ISO 1823:2015

Rubber hose and hose assemblies for oil suction and discharge service — Specification

ISO 9152:1998

Aerospace — Bolts, with MJ threads, in titanium alloys, strength class 1 100 MPa — Procurement specification

ISO 2597-1:2006

Iron ores — Determination of total iron content — Part 1: Titrimetric method after tin(II) chloride reduction

ISO 16148:2016/AMD 1:2020

Gas cylinders — Refillable seamless steel gas cylinders and tubes — Acoustic emission examination (AT) and follow-up ultrasonic examination (UT) for periodic inspection and testing — Amendment 1

ISO 1222:2010

Photography — Tripod connections

ISO 3915:1981

Plastics — Measurement of resistivity of conductive plastics

ISO/IEC 29197:2015

Information technology — Evaluation methodology for environmental influence in biometric system performance

ISO 10556:2009

Fibre ropes of polyester/polyolefin dual fibres

ISO 11092:2014

Textiles — Physiological effects — Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test)

ISO 10572:2009

Mixed polyolefin fibre ropes

ISO 16971:2015

Ophthalmic instruments — Optical coherence tomograph for the posterior segment of the human eye

ISO 14782:1999

Plastics — Determination of haze for transparent materials

ISO 3374:2000

Reinforcement products — Mats and fabrics — Determination of mass per unit area

ISO 3391:1976

Cryolite, natural and artificial — Determination of calcium content — Flame atomic absorption method

ISO 8820-5:2015

Road vehicles — Fuse-links — Part 5: Fuse-links with axial terminals (Strip fuse-links) Types SF 30 and SF 51 and test fixtures

ISO 13526:2010

Space data and information transfer systems — Tracking data message

ISO 10521-1:2006

Road vehicles — Road load — Part 1: Determination under reference atmospheric conditions

ISO 15726:2009

Metallic and other inorganic coatings — Electrodeposited zinc alloys with nickel, cobalt or iron

ISO 6743-5:2006

Lubricants, industrial oils and related products (class L) — Classification — Part 5: Family T (Turbines)

ISO 10521-2:2006

Road vehicles — Road load — Part 2: Reproduction on chassis dynamometer

ISO 12617:2015

Road vehicles — Liquefied natural gas (LNG) refuelling connector — 3,1 MPa connector

ISO 9026:2007

Raw rubber or unvulcanized compounds — Determination of green strength

ISO/IEC 19794-3:2006

Information technology — Biometric data interchange formats — Part 3: Finger pattern spectral data

ISO 3341:2000

Textile glass — Yarns — Determination of breaking force and breaking elongation

ISO 6953-2:2015

Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers

ISO 3784:1976

Road vehicles — Measurement of impact velocity in collision tests

ISO 6621-4:2015

Internal combustion engines — Piston rings — Part 4: General specifications

ISO 2976:2005

Coated abrasives — Abrasive belts — Selection of width/length combinations

ISO 15930-6:2003

Graphic technology — Prepress digital data exchange using PDF — Part 6: Complete exchange of printing data suitable for colour-managed workflows using PDF 1.4 (PDF/X-3)

ISO 4002-2:1977

Equipment for sowing and planting — Disks — Part 2: Flat disks type D2 with single bevel — Dimensions

ISO 20418-3:2020

Textiles — Qualitative and quantitative proteomic analysis of some animal hair fibres — Part 3: Peptide detection using LC-MS without protein reduction