ISO 3014:1993

Petroleum products — Determination of the smoke point of kerosine

ISO 18941:2020

Imaging materials — Colour reflection prints — Test method for ozone gas fading stability

ISO 12357-1:1999

Commercial road vehicles — Drawbar couplings and eyes for rigid drawbars — Part 1: Strength tests for general cargo centre-axle trailers

ISO 17515-1:2015

Intelligent transport systems — Communications access for land mobiles (CALM) — Evolved universal terrestrial radio access network (E-UTRAN) — Part 1: General usage

ISO 610:1990

High-tensile steel chains (round link) for chain conveyors and coal ploughs

ISO 9028:2006

Rubber — Dissolution by acid digestion

ISO 13539:1998

Earth-moving machinery — Trenchers — Definitions and commercial specifications

ISO 11691:2020

Acoustics — Measurement of insertion loss of ducted silencers without flow — Laboratory survey method

ISO 27895:2009

Vacuum technology — Valves — Leak test

ISO 27894:2009

Vacuum technology — Vacuum gauges — Specifications for hot cathode ionization gauges

ISO 23952:2020

Automation systems and integration — Quality information framework (QIF) — An integrated model for manufacturing quality information

ISO/IEC 17344:2009

Information technology — Data interchange on 120 mm and 80 mm optical disk using +R format — Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 16X)

ISO/IEC 26925:2009

Information technology — Data interchange on 120 mm and 80 mm optical disk using +RW HS format — Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed 8X)

ISO 8521:2020

Glass-reinforced thermosetting plastic (GRP) pipes — Test methods for the determination of the initial circumferential tensile wall strength

ISO/IEC 17341:2009

Information technology — Data interchange on 120 mm and 80 mm optical disk using +RW format — Capacity: 4,7 Gbytes and 1,46 Gbytes per side (recording speed up to 4X)

ISO/HL7 10781:2015

Health Informatics — HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM)

ISO 3713:1987

Ferroalloys — Sampling and preparation of samples — General rules

ISO/IEC 29642:2009

Information technology — Data interchange on 120 mm and 80 mm optical disk using +RW DL format — Capacity: 8,55 Gbytes and 2,66 Gbytes per side (recording speed 2,4X)

ISO 19014-4:2020

Earth-moving machinery — Functional safety — Part 4: Design and evaluation of software and data transmission for safety-related parts of the control system

ISO 4080:2009

Rubber and plastics hoses and hose assemblies — Determination of permeability to gas

ISO 11812:2020

Small craft — Watertight or quick-draining recesses and cockpits

ISO 14520-12:2015

Gaseous fire-extinguishing systems — Physical properties and system design — Part 12: IG-01 extinguishant

ISO 14520-14:2015

Gaseous fire-extinguishing systems — Physical properties and system design — Part 14: IG-55 extinguishant

ISO/IEC 8825-7:2015

Information technology — ASN.1 encoding rules — Part 7: Specification of Octet Encoding Rules (OER)

ISO 22232-1:2020

Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 1: Instruments

ISO/IEC 8825-6:2015

Information technology — ASN.1 encoding rules: Registration and application of PER encoding instructions — Part 6:

ISO/TS 21488:2020

Plastics — Test method for exposing polyolefins outdoors combining natural weathering and artificial irradiation

ISO 14520-15:2015

Gaseous fire-extinguishing systems — Physical properties and system design — Part 15: IG-541 extinguishant

ISO 14520-13:2015

Gaseous fire-extinguishing systems — Physical properties and system design — Part 13: IG-100 extinguishant

ISO 13885-2:2020

Gel permeation chromatography (GPC) — Part 2: N,N-Dimenthylacetamide (DMAC) as eluent

ISO 22768:2020

Raw rubber and rubber latex — Determination of the glass transition temperature by differential scanning calorimetry (DSC)

ISO 12402-7:2020

Personal flotation devices — Part 7: Materials and components — Safety requirements and test methods

ISO 13885-3:2020

Gel permeation chromatography (GPC) — Part 3: Water as eluent

ISO 12402-9:2020

Personal flotation devices — Part 9: Evaluation

ISO 12402-3:2020

Personal flotation devices — Part 3: Lifejackets, performance level 150 — Safety requirements

ISO 12402-4:2020

Personal flotation devices — Part 4: Lifejackets, performance level 100 — Safety requirements

ISO 12402-5:2020

Personal flotation devices — Part 5: Buoyancy aids (level 50) — Safety requirements

ISO 6551:1982

Petroleum liquids and gases — Fidelity and security of dynamic measurement — Cabled transmission of electric and/or electronic pulsed data

ISO 12402-6:2020

Personal flotation devices — Part 6: Special application lifejackets and buoyancy aids — Safety requirements and additional test methods

ISO/TS 4210-10:2020

Cycles — Safety requirements for bicycles — Part 10: Safety requirements for electrically power assisted cycles (EPACs)

ISO 2145:1978

Documentation — Numbering of divisions and subdivisions in written documents

ISO 692:1982

Pulps — Determination of alkali solubility

ISO 7540:2020

Spices and condiments — Ground sweet and hot paprika (Capsicum annuum L. and Capsicum frutescens L.) — Specifications

ISO 7541:2020

Spices and condiments — Spectrophotometric determination of the extractable colour in paprika

ISO 16405:2015

Room corner and open calorimeter — Guidance on sampling and measurement of effluent gas production using FTIR technique

ISO 17089-2:2012

Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications

ISO 13007-5:2015

Ceramic tiles — Grouts and adhesives — Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives

ISO 17740-1:2015

Building construction machinery and equipment — Concrete placing systems for stationary equipment — Part 1: Terminology and commercial specifications

ISO 6527:1982

Nuclear power plants — Reliability data exchange — General guidelines

ISO 17859:2015

Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of piezoelectric strain at high electric field

ISO 12713:1998

Non-destructive testing — Acoustic emission inspection — Primary calibration of transducers

ISO/IEC 17839-2:2015

Information technology — Biometric System-on-Card — Part 2: Physical characteristics

ISO 482:1977

Aircraft — Propulsion units and components — Methods of numbering and describing direction of rotation

ISO 21011:2008

Cryogenic vessels — Valves for cryogenic service

ISO/IEC 23008-9:2019

Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 9: 3D Audio conformance testing

ISO 17677-1:2019

Resistance welding — Vocabulary — Part 1: Spot, projection and seam welding

ISO 24917:2020

Space systems — General test requirements for launch vehicles

ISO 649-1:1981

Laboratory glassware — Density hydrometers for general purposes — Part 1: Specification

ISO 649-2:1981

Laboratory glassware — Density hydrometers for general purposes — Part 2: Test methods and use

ISO 650:1977

Relative density 60/60 degrees F hydrometers for general purposes

ISO 1271:1983

Essential oils — Determination of carbonyl value — Free hydroxylamine method

ISO 13850:2015

Safety of machinery — Emergency stop function — Principles for design

ISO 18565:2015

Document management — AFP/Archive

ISO 1108:1992

Spices and condiments — Determination of non-volatile ether extract

ISO 3679:2015

Determination of flash no-flash and flash point — Rapid equilibrium closed cup method

ISO 24034:2020

Welding consumables — Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys — Classification

ISO 3044:2020

Essential oil of Corymbia citriodora (Hook.) K.D. Hill and L.A.S. Johnson (syn. Eucalyptus citriodora Hook.)

ISO 15249:1998

Zinc sulfide concentrates — Determination of gold content — Acid dissolution/solvent extraction/flame atomic absorption spectrometric method

ISO 17533:2015

Welding for aerospace applications — Welding information in design documents

ISO/IEC 23093-1:2020

Information technology — Internet of media things — Part 1: Architecture

ISO 7379:1983

Hexagon socket head shoulder screws

ISO/TS 10303-436:2006

Industrial automation systems and integration — Product data representation and exchange — Part 436: Application module: AP236 furniture catalog and interior design

ISO/TS 16727:2013

Soil quality — Determination of mercury — Cold vapour atomic fluorescence spectrometry (CVAFS)

ISO 5367:2014

Anaesthetic and respiratory equipment — Breathing sets and connectors

ISO/IEC 17823:2015

Information technology — Office equipment — Colour terminology for office colour equipment

ISO 10545-14:2015

Ceramic tiles — Part 14: Determination of resistance to stains

ISO/IEC 8825-2:2015

Information technology — ASN.1 encoding rules: Specification of Packed Encoding Rules (PER) — Part 2:

ISO 7385:1983

Nuclear power plants — Guidelines to ensure quality of collected data on reliability

ISO/IEC 8825-1:2015

Information technology — ASN.1 encoding rules: Specification of Basic Encoding Rules (BER), Canonical Encoding Rules (CER) and Distinguished Encoding Rules (DER) — Part 1:

ISO 8813:1992

Earth-moving machinery — Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom

ISO 12216:2020

Small craft — Windows, portlights, hatches, deadlights and doors — Strength and watertightness requirements

ISO 25981:2020

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Connectors for electronically monitored charging systems with 12 V or 24 V nominal supply voltage

ISO 19165-2:2020

Geographic information — Preservation of digital data and metadata — Part 2: Content specifications for Earth observation data and derived digital products

ISO 1122-2:1999

Vocabulary of gear terms — Part 2: Definitions related to worm gear geometry

ISO/TR 21724-1:2020

Intelligent transport systems — Common Transport Service Account Systems — Part 1: Framework and use cases

ISO/IEC 8825-5:2015

Information technology — ASN.1 encoding rules: Mapping W3C XML schema definitions into ASN.1 — Part 5:

ISO 9018:2015

Destructive tests on welds in metallic materials — Tensile test on cruciform and lapped joints

ISO/IEC 8825-4:2015

Information technology — ASN.1 encoding rules: XML Encoding Rules (XER) — Part 4:

ISO/IEC 8825-3:2015

Information technology — ASN.1 encoding rules: Specification of Encoding Control Notation (ECN) — Part 3:

ISO 22896:2006

Road vehicles — Deployment and sensor bus for occupant safety systems

ISO 29681:2009

Paper, board and pulps — Determination of pH of salted water extracts

ISO 12131-3:2020

Plain bearings — Hydrodynamic plain thrust pad bearings under steady-state conditions — Part 3: Guide values for the calculation of thrust pad bearings

ISO 6196-8:1998

Micrographics — Vocabulary — Part 8: Use

ISO 14001:2015

Environmental management systems — Requirements with guidance for use

ISO 11612:2015

Protective clothing — Clothing to protect against heat and flame — Minimum performance requirements

ISO 16779:2015

Sensory analysis — Assessment (determination and verification) of the shelf life of foodstuffs

ISO/IEC 19775-2:2015

Information technology — Computer graphics, image processing and environmental data representation — Extensible 3D (X3D) — Part 2: Scene access interface (SAI)

ISO 14116:2015

Protective clothing — Protection against flame — Limited flame spread materials, material assemblies and clothing

ISO 6142-1:2015

Gas analysis — Preparation of calibration gas mixtures — Part 1: Gravimetric method for Class I mixtures

ISO 16635-2:2014

Dentistry — Dental rubber dam instruments — Part 2: Clamp forceps

ISO 12127-1:2015

Clothing for protection against heat and flame — Determination of contact heat transmission through protective clothing or constituent materials — Part 1: Contact heat produced by heating cylinder

ISO 2825:1981

Spices and condiments — Preparation of a ground sample for analysis

ISO 8770:2003

Plastics piping systems for soil and waste discharge (low and high temperature) inside buildings — Polyethylene (PE)

ISO 1122-1:1998

Vocabulary of gear terms — Part 1: Definitions related to geometry

ISO 13356:2015

Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)

ISO/TR 20416:2020

Medical devices — Post-market surveillance for manufacturers

ISO 19453-6:2020

Road vehicles — Environmental conditions and testing for electrical and electronic equipment for drive system of electric propulsion vehicles — Part 6: Traction battery packs and systems

ISO 5525:1986

Potatoes — Storage in the open (in clamps)

ISO 14955-3:2020

Machine tools — Environmental evaluation of machine tools — Part 3: Principles for testing metal-cutting machine tools with respect to energy efficiency

ISO 898-7:1992

Mechanical properties of fasteners — Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

ISO 3271:2015

Iron ores for blast furnace and direct reduction feedstocks — Determination of the tumble and abrasion indices

ISO 22904:2020

Additions for concrete

ISO 4696-1:2015

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 1: Reduction with CO, CO2, H2 and N2

ISO 4696-2:2015

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by static method — Part 2: Reduction with CO and N2

ISO/TS 18621-11:2019

Image quality evaluation methods for printed matter — Part 11: Colour gamut analysis

ISO 21562:2020

Ships and marine technology — Bunker fuel mass flow meters on receiving vessel — Requirements

ISO 11257:2015

Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization

ISO 11095:1996

Linear calibration using reference materials

ISO 199:2014

Rolling bearings — Thrust bearings — Geometrical product specification (GPS) and tolerance values

ISO 2912:1973

Modular units for machine tool construction — Multi-spindle heads — Casing and input drive shaft dimensions

ISO 17628:2015

Geotechnical investigation and testing — Geothermal testing — Determination of thermal conductivity of soil and rock using a borehole heat exchanger

ISO 16905:2015

Resilient floor coverings — Specification for rubber floor covering — Tile/Plank

ISO 4291:1985

Methods for the assessement of departure from roundness — Measurement of variations in radius

ISO 13930:2015

Iron ores for blast furnace feedstocks — Determination of low-temperature reduction-disintegration indices by dynamic method

ISO 4695:2015

Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index

ISO 7992:2015

Iron ores for blast furnace feedstocks — Determination of reduction under load

ISO 11256:2015

Iron ore pellets for shaft direct-reduction feedstocks — Determination of the clustering index

ISO 1768:1975

Glass hydrometers — Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)

ISO 11258:2015

Iron ores for shaft direct-reduction feedstocks — Determination of the reducibility index, final degree of reduction and degree of metallization

ISO 4700:2015

Iron ore pellets for blast furnace and direct reduction feedstocks — Determination of the crushing strength

ISO 5074:2015

Hard coal — Determination of Hardgrove grindability index

ISO/IEC 8825-8:2018

Information technology — ASN.1 encoding rules — Part 8: Specification of JavaScript Object Notation Encoding Rules (JER)

ISO 18782:2015

Textiles — Determination of dynamic hygroscopic heat generation

ISO 15733:2015

Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties

ISO 4435:2003

Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U)

ISO 2320:2015

Fasteners — Prevailing torque steel nuts — Functional properties

ISO 9599:2015

Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method

ISO 19650-3:2020

Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) — Information management using building information modelling — Part 3: Operational phase of the assets

ISO 11064-3:1999

Ergonomic design of control centres — Part 3: Control room layout

ISO 4652:2020

Rubber compounding ingredients — Carbon black — Determination of specific surface area by nitrogen adsorption methods — Single-point procedures

ISO 10304-4:1997

Water quality — Determination of dissolved anions by liquid chromatography of ions — Part 4: Determination of chlorate, chloride and chlorite in water with low contamination

ISO/IEC 24769-62:2015

Information Technology — Real Time Locating System (RTLS) Device Conformance Test Methods — Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface

ISO/IEC/IEEE 41062:2019

Software engineering — Recommended practice for software acquisition

ISO 12890:1999

Water quality — Determination of toxicity to embryos and larvae of freshwater fish — Semi-static method

ISO 16474-2:2013

Paints and varnishes — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps

ISO 17874-4:2006

Remote handling devices for radioactive materials — Part 4: Power manipulators

ISO/IEC 16350:2015

Information technology — Systems and software engineering — Application management

ISO/TS 23942:2020

Determination of hydroxytyrosol and tyrosol content in extra virgin olive oils — Reverse phase high performance liquid chromatography (RP-HPLC)

ISO 447:1984

Machine tools — Direction of operation of controls

ISO 4551:1987

Ferroalloys — Sampling and sieve analysis

ISO/IEC 24727-1:2014

Identification cards — Integrated circuit card programming interfaces — Part 1: Architecture

ISO 4552-2:1987

Ferroalloys — Sampling and sample preparation for chemical analysis — Part 2: Ferrotitanium, ferromolybdenum, ferrotungsten, ferroniobium, ferrovanadium

ISO 17937:2015

Dentistry — Osteotome

ISO 4552-1:1987

Ferroalloys — Sampling and sample preparation for chemical analysis — Part 1: Ferrochromium, ferrosilicochromium, ferrosilicon, ferrosilicomanganese, ferromanganese

ISO 21873-1:2015

Building construction machinery and equipment — Mobile crushers — Part 1: Terminology and commercial specifications

ISO/TS 17938:2014

Health informatics — Semantic network framework of traditional Chinese medicine language system

ISO 18743:2015

Microbiology of the food chain — Detection of Trichinella larvae in meat by artificial digestion method

ISO 15819:2014

Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS