ISO 15242-2:2015

Rolling bearings — Measuring methods for vibration — Part 2: Radial ball bearings with cylindrical bore and outside surface

ISO 21994:2007

Passenger cars — Stopping distance at straight-line braking with ABS — Open-loop test method

ISO/IEC TS 33073:2017

Information technology — Process assessment — Process capability assessment model for quality management

ISO/TS 10303-1719:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1719: Application module: Part template non planar shape

ISO 20785-3:2015

Dosimetry for exposures to cosmic radiation in civilian aircraft — Part 3: Measurements at aviation altitudes

ISO/TS 10303-1768:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1768: Application module: Composite material aspects

ISO 16638-1:2015

Radiological protection — Monitoring and internal dosimetry for specific materials — Part 1: Inhalation of uranium compounds

ISO 4121:2003

Sensory analysis — Guidelines for the use of quantitative response scales

ISO 3892:2000

Conversion coatings on metallic materials — Determination of coating mass per unit area — Gravimetric methods

ISO/TR 9819:1991

Road vehicles — Comparison tables of regulations on photometric requirements of light signalling devices

ISO/IEC 19831:2015

Cloud Infrastructure Management Interface (CIMI) Model and RESTful HTTP-based Protocol — An Interface for Managing Cloud Infrastructure

ISO 5631-2:2015

Paper and board — Determination of colour by diffuse reflectance — Part 2: Outdoor daylight conditions (D65/10 degrees)

ISO 5631-3:2015

Paper and board — Determination of colour by diffuse reflectance — Part 3: Indoor illumination conditions (D50/2 degrees)

ISO 22734:2019

Hydrogen generators using water electrolysis — Industrial, commercial, and residential applications

ISO 12465:2007

Plywood — Specifications

ISO/TS 10303-1327:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1327: Application module: Compound shape representation

ISO/TS 10303-1056:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1056: Application module: Configuration item

ISO/TS 10303-1308:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1308: Application module: Picture representation

ISO 18238:2015

Space systems — Closed loop problem solving management

ISO 5008:2002

Agricultural wheeled tractors and field machinery — Measurement of whole-body vibration of the operator

ISO/TS 17996:2006

Cheese — Determination of rheological properties by uniaxial compression at constant displacement rate

ISO/TS 22745-40:2010

Industrial automation systems and integration — Open technical dictionaries and their application to master data — Part 40: Master data representation

ISO 1509:1973

General purpose push-pull three-pole circuit-breakers for aircraft — Performance requirements

ISO/TS 10303-1017:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1017: Application module: Product identification

ISO/IEC 29110-2-1:2015

Software engineering — Lifecycle profiles for Very Small Entities (VSEs) — Part 2-1: Framework and taxonomy

ISO 16574:2015

Determination of percentage of resolvable pearlite in high carbon steel wire rod

ISO/TS 10303-1280:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1280: Application module: Required resource characterized

ISO/TS 10303-1756:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1756: Application module: Conductivity material aspects

ISO/TS 10303-1631:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1631: Application module: Area 2D

ISO/IEC 18477-3:2015

Information technology — Scalable compression and coding of continuous-tone still images — Part 3: Box file format

ISO 9103:1987

Road vehicles — Compression-ignition engines — Screw-in injection nozzle holder, type 23

IEC 80369-5:2016

Small-bore connectors for liquids and gases in healthcare applications — Part 5: Connectors for limb cuff inflation applications

ISO 13344:2015

Estimation of the lethal toxic potency of fire effluents

ISO 16711:2021

Requirements for seismic assessment and retrofit of concrete structures

ISO 18172-1:2007

Gas cylinders — Refillable welded stainless steel cylinders — Part 1: Test pressure 6 MPa and below

ISO 11901-5:2021

Tools for pressing — Gas springs — Part 5: Safety instructions for gas springs

ISO 11192:2005

Small craft — Graphical symbols

ISO/IEC 24779-9:2015

Information technology — Cross-jurisdictional and societal aspects of implementation of biometric technologies — Pictograms, icons and symbols for use with biometric systems — Part 9: Vascular applications

ISO/TS 10303-1793:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1793: Application module: Solid model

ISO 15396:2007

Space data and information transfer systems — Cross support reference model — Space link extension services

ISO/TS 10303-1632:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1632: Application module: Assembly 2D shape

ISO 18122:2015

Solid biofuels — Determination of ash content

ISO 2258:1976

Printing ribbons — Minimum markings to appear on containers

ISO/TS 10303-1633:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1633: Application module: Assembly 3D shape

ISO 18123:2015

Solid biofuels — Determination of the content of volatile matter

ISO 3402:1999

Tobacco and tobacco products — Atmosphere for conditioning and testing

ISO 13940:2015

Health informatics — System of concepts to support continuity of care

ISO/TS 10303-1638:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1638: Application module: Assembly module with cable component 2D

ISO/TS 10303-1639:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1639: Application module: Assembly module with cable component 3D

ISO 18172-2:2007

Gas cylinders — Refillable welded stainless steel cylinders — Part 2: Test pressure greater than 6 MPa

ISO 23201:2015

Aluminium oxide primarily used for production of aluminium — Determination of trace elements — Wavelength dispersive X-ray fluorescence spectrometric method

ISO 28721-4:2015

Vitreous and porcelain enamels — Glass-lined apparatus for process plants — Part 4: Quality requirements for glass-lined flanged steel pipes and flanged steel fittings

ISO 21660-3:2021

Solid recovered fuels — Determination of moisture content using the oven dry method — Part 3: Moisture in general analysis sample

ISO 7131:2009

Earth-moving machinery — Loaders — Terminology and commercial specifications

ISO 9087:1998

Wood - Determination of nail and screw holding power under axial load application

ISO 18653:2003

Gears — Evaluation of instruments for the measurement of individual gears

ISO 9957-3:1997

Fluid draughting media — Part 3: Water-based coloured draughting inks — Requirements and test conditions

ISO 21107:2015

Rolling bearings and spherical plain bearings — Search structure for electronic media — Characteristics and performance criteria identified by property vocabulary

ISO 11531:2015

Metallic materials — Sheet and strip — Earing test

ISO/IEC 29124:2010

Information technology — Programming languages, their environments and system software interfaces — Extensions to the C++ Library to support mathematical special functions

ISO 4113:2010

Road vehicles — Calibration fluids for diesel injection equipment

ISO 7592:1983

Calibrated round steel link lifting chains — Guidelines to proper use and maintenance

ISO 8317:2015

Child-resistant packaging — Requirements and testing procedures for reclosable packages

ISO 1288-3:2016

Glass in building — Determination of the bending strength of glass — Part 3: Test with specimen supported at two points (four point bending)

ISO 3835-3:1980

Equipment for vine cultivation and wine making — Vocabulary

ISO 15360-2:2015

Recycled pulps — Estimation of Stickies and Plastics — Part 2: Image analysis method

ISO 17828:2015

Solid biofuels — Determination of bulk density

ISO/TS 17431:2006

Fire tests— Reduced-scale model box test

ISO 10767-2:1999

Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 2: Simplified method for pumps

ISO/TS 20443:2017

Health informatics — Identification of medicinal products — Implementation guidelines for ISO 11615 data elements and structures for the unique identification and exchange of regulated medicinal product information

ISO/IEC 29199-4:2010

Information technology — JPEG XR image coding system — Part 4: Conformance testing

ISO 9958-2:1992

Draughting media for technical drawings — Draughting film with polyester base — Part 2: Determination of properties

ISO 13408-5:2006

Aseptic processing of health care products — Part 5: Sterilization in place

ISO 9959-1:1992

Numerically controlled draughting machines — Drawing test for the evaluation of performance — Part 1: Vector plotters

ISO 9960-1:1992

Draughting instruments with or without graduation — Part 1: Draughting scale rules

ISO 18168:2015

Textile floor coverings — Colour fastness to shampooing

ISO 7098:2015

Information and documentation — Romanization of Chinese

ISO 15642:2003

Road construction and maintenance equipment — Asphalt mixing plants — Terminology and commercial specifications

ISO 14269-1:1997

Tractors and self-propelled machines for agriculture and forestry — Operator enclosure environment — Part 1: Vocabulary

ISO/IEC 15938-10:2005

Information technology - Multimedia content description interface — Part 10: Schema definition

ISO 3894:2015

Road vehicles — Wheels/rims for commercial vehicles — Test methods

ISO 15644:2002

Road construction and maintenance equipment — Chippings spreaders — Terminology and commercial specifications

ISO/IEC 21000-9:2005

Information technology — Multimedia framework (MPEG-21) — Part 9: File Format

ISO/IEC 19763-8:2015

Information technology — Metamodel framework for interoperability (MFI) — Part 8: Metamodel for role and goal model registration

ISO 17831-2:2015

Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 2: Briquettes

ISO 17831-1:2015

Solid biofuels — Determination of mechanical durability of pellets and briquettes — Part 1: Pellets

ISO/TS 10303-1784:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1784: Application module: External analysis representation

ISO 9175-1:1988

Tubular tips for hand-held technical pens using India ink on tracing paper — Part 1: Definitions, dimensions, designation and marking

ISO 17829:2015

Solid Biofuels — Determination of length and diameter of pellets

ISO/TS 10303-1785:2010

Industrial automation systems and integration — Product data representation and exchange — Part 1785: Application module: Analysis representation

ISO 23741:2021

Plastics — Determination of spray water delivery during spray cycles when using a xenon arc weathering test apparatus

ISO 16610-30:2015

Geometrical product specifications (GPS) — Filtration — Part 30: Robust profile filters: Basic concepts

ISO 14934-1:2010

Fire tests — Calibration and use of heat flux meters — Part 1: General principles

ISO 13319-1:2021

Determination of particle size distribution — Electrical sensing zone method — Part 1: Aperture/orifice tube method

ISO/TS 6336-21:2017

Calculation of load capacity of spur and helical gears — Part 21: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Integral temperature method

ISO 18404:2015

Quantitative methods in process improvement — Six Sigma — Competencies for key personnel and their organizations in relation to Six Sigma and Lean implementation

ISO 16321-1:2021

Eye and face protection for occupational use — Part 1: General requirements

ISO 13948-1:2015

Diesel engines — Fuel injection pumps and fuel injector low-pressure connections — Part 1: Threaded connections

ISO/TS 18864:2017

Health informatics — Quality metrics for detailed clinical models

ISO 50009:2021

Energy management systems — Guidance for implementing a common energy management system in multiple organizations

ISO/TS 50008:2018

Energy management and energy savings — Building energy data management for energy performance — Guidance for a systemic data exchange approach

ISO 10896-5:2015

Rough-terrain trucks — Safety requirements and verification — Part 5: Interface between rough-terrain truck and integrated personnel work platform

ISO 15689:2003

Road construction and maintenance equipment — Powder binder spreaders — Terminology and commercial specifications

ISO 16321-3:2021

Eye and face protection for occupational use — Part 3: Additional requirements for mesh protectors

ISO 16321-2:2021

Eye and face protection for occupational use — Part 2: Additional requirements for protectors used during welding and related techniques

ISO/TS 6336-20:2017

Calculation of load capacity of spur and helical gears — Part 20: Calculation of scuffing load capacity (also applicable to bevel and hypoid gears) — Flash temperature method