ISO 2602:1980

Statistical interpretation of test results — Estimation of the mean — Confidence interval

ISO 7207-1:2007

Implants for surgery — Components for partial and total knee joint prostheses — Part 1: Classification, definitions and designation of dimensions

ISO/IEC 21794-2:2021

Information technology — Plenoptic image coding system (JPEG Pleno) — Part 2: Light field coding

ISO/IEC 27006:2015

Information technology — Security techniques — Requirements for bodies providing audit and certification of information security management systems

ISO 14235:1998

Soil quality — Determination of organic carbon by sulfochromic oxidation

ISO 12170:1996

Gas welding equipment — Thermoplastic hoses for welding and allied processes

ISO 29042-9:2011

Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 9: Decontamination index

ISO 4901:2011

Reinforced plastics based on unsaturated-polyester resins — Determination of the residual styrene monomer content, as well as the content of other volatile aromatic hydrocarbons, by gas chromatography

ISO 13374-4:2015

Condition monitoring and diagnostics of machine systems — Data processing, communication and presentation — Part 4: Presentation

ISO 29042-8:2011

Safety of machinery — Evaluation of the emission of airborne hazardous substances — Part 8: Room method for the measurement of the pollutant concentration parameter

ISO 5022:1979

Shaped refractory products — Sampling and acceptance testing

ISO 5837-1:1985

Implants for surgery — Intramedullary nailing systems — Part 1: Intramedullary nails with cloverleaf or V-shaped cross-section

ISO/IEC 18014-3:2009

Information technology — Security techniques — Time-stamping services — Part 3: Mechanisms producing linked tokens

ISO 7197:2006

Neurosurgical implants — Sterile, single-use hydrocephalus shunts and components

ISO/IEC GUIDE 2:2004

Standardization and related activities — General vocabulary

ISO 29601:2011

Paints and varnishes — Corrosion protection by protective paint systems — Assessment of porosity in a dry film

ISO 15063:2011

Plastics — Polyols for use in the production of polyurethanes — Determination of hydroxyl number by NIR spectroscopy

ISO 12952-1:2010

Textiles — Assessment of the ignitability of bedding items — Part 1: Ignition source: smouldering cigarette

ISO 23420:2021

Microbeam analysis — Analytical electron microscopy — Method for the determination of energy resolution for electron energy loss spectrum analysis

ISO 10595:2010

Resilient floor coverings — Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles — Specification

ISO 5391:2003

Pneumatic tools and machines — Vocabulary

ISO/IEC 29146:2016

Information technology — Security techniques — A framework for access management

ISO 14906:2018

Electronic fee collection — Application interface definition for dedicated short-range communication

ISO 6460-2:2014

Motorcycles — Measurement method for gaseous exhaust emissions and fuel consumption — Part 2: Test cycles and specific test conditions

ISO 502:2015

Coal — Determination of caking power — Gray-King coke test

ISO/TS 80004-13:2017

Nanotechnologies — Vocabulary — Part 13: Graphene and related two-dimensional (2D) materials

ISO 23131:2021

Ellipsometry — Principles

ISO 15099:2003

Thermal performance of windows, doors and shading devices — Detailed calculations

ISO/TS 34700:2016

Animal welfare management — General requirements and guidance for organizations in the food supply chain

ISO/TS 19657:2017

Definitions and technical criteria for food ingredients to be considered as natural

ISO 606:2015

Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets

ISO 13381-1:2015

Condition monitoring and diagnostics of machines — Prognostics — Part 1: General guidelines

ISO 10808:2010

Nanotechnologies — Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing

ISO 12180-1:2011

Geometrical product specifications (GPS) — Cylindricity — Part 1: Vocabulary and parameters of cylindrical form

ISO 16460:2021

Intelligent transport systems — Localized communications — Communication protocol messages for global usage

ISO 12180-2:2011

Geometrical product specifications (GPS) — Cylindricity — Part 2: Specification operators

ISO/IEC GUIDE 77-2:2008

Guide for specification of product properties and classes — Part 2: Technical principles and guidance

ISO 13232-7:2005

Motorcycles — Test and analysis procedures for research evaluation of rider crash protective devices fitted to motorcycles — Part 7: Standardized procedures for performing computer simulations of motorcycle impact tests

ISO 7500-2:2006

Metallic materials — Verification of static uniaxial testing machines — Part 2: Tension creep testing machines — Verification of the applied force

ISO/TR 17671-5:2004

Welding — Recommendations for welding of metallic materials — Part 5: Welding of clad steels

ISO/IEC GUIDE 77-3:2008

Guide for specification of product properties and classes — Part 3: Experience gained

ISO 10801:2010

Nanotechnologies — Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method

ISO 7233:2021

Rubber and plastics hoses and hose assemblies — Determination of resistance to vacuum

ISO 3998:1977

Textiles — Determination of resistance to certain insect pests

ISO 1443:1973

Meat and meat products — Determination of total fat content

ISO 1953:2015

Hard coal — Size analysis by sieving

ISO/TS 6733:2006

Milk and milk products — Determination of lead content — Graphite furnace atomic absorption spectrometric method

ISO/TR 18568:2021

Packaging and the environment — Marking for material identification

ISO 2447:1998

Fruit and vegetable products — Determination of tin content

ISO 9187-1:2010

Injection equipment for medical use — Part 1: Ampoules for injectables

ISO 12181-1:2011

Geometrical product specifications (GPS) — Roundness — Part 1: Vocabulary and parameters of roundness

ISO 12181-2:2011

Geometrical product specifications (GPS) — Roundness — Part 2: Specification operators

ISO 12781-1:2011

Geometrical product specifications (GPS) — Flatness — Part 1: Vocabulary and parameters of flatness

ISO 12780-1:2011

Geometrical product specifications (GPS) — Straightness — Part 1: Vocabulary and parameters of straightness

ISO/IEC GUIDE 77-1:2008

Guide for specification of product properties and classes — Part 1: Fundamental benefits

ISO 4129:2012

Road vehicles — Mopeds — Symbols for controls, indicators and tell-tales

ISO 9187-2:2010

Injection equipment for medical use — Part 2: One-point-cut (OPC) ampoules

ISO 12780-2:2011

Geometrical product specifications (GPS) — Straightness — Part 2: Specification operators

ISO 8576:1996

Optics and optical instruments — Microscopes — Reference system of polarized light microscopy

ISO 6043:1985

Shipbuilding and marine structures — Eye and fork assemblies under tension load — Main dimensions

ISO/ASTM 51900:2009

Guide for dosimetry in radiation research on food and agricultural products

ISO 6044:1985

Shipbuilding and marine structures — Derrick boom heel fittings — Main dimensions

ISO/IEC 29190:2015

Information technology — Security techniques — Privacy capability assessment model

ISO/IEC 29187-1:2013

Information technology — Identification of privacy protection requirements pertaining to learning, education and training (LET) — Part 1: Framework and reference model

ISO 3826-4:2015

Plastics collapsible containers for human blood and blood components — Part 4: Aphaeresis blood bag systems with integrated features

ISO 1893:2007

Refractory products — Determination of refractoriness under load — Differential method with rising temperature

ISO 3857-2:1977

Compressors, pneumatic tools and machines — Vocabulary — Part 2: Compressors

ISO 27470:2011

Aircraft ground equipment — Upper deck catering vehicle — Functional requirements

ISO/TS 8103-6:2017

Escalators and moving walks — Part 6: Safety parameters meeting the GESRs

ISO 15706-2:2007

Information and documentation — International Standard Audiovisual Number (ISAN) — Part 2: Version identifier

ISO/IEC TS 24751-4:2019

Information technology for learning, education and training — AccessForAll framework for individualized accessibility — Part 4: Registry server API

ISO 23495:2021

Industrial furnaces and associated processing equipment — Safety requirements for steel converter and associated equipment

ISO/TS 19321:2020

Intelligent transport systems — Cooperative ITS — Dictionary of in-vehicle information (IVI) data structures

ISO 8526-2:1990

Modular units for machine tools — Workholding pallets — Part 2: Workholding pallets of nominal size greater than 800 mm

ISO 8526-1:1990

Modular units for machine tools — Workholding pallets — Part 1: Workholding pallets up to 800 mm nominal size

ISO 9131:1993

Three-wheeled mopeds and motorcycles — Dimensions — Vocabulary

ISO 2415:2004

Forged shackles for general lifting purposes — Dee shackles and bow shackles

ISO 5836:1988

Implants for surgery — Metal bone plates — Holes corresponding to screws with asymmetrical thread and spherical under-surface

ISO 10425:2003

Steel wire ropes for the petroleum and natural gas industries — Minimum requirements and terms of acceptance

ISO 18252:2006

Anhydrous milk fat — Determination of sterol composition by gas liquid chromatography (Routine method)

ISO 3722:1976

Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods

ISO 1998-6:2000

Petroleum industry — Terminology — Part 6: Measurement

ISO 12671:2021

Thermal spraying — Thermally sprayed coatings — Symbolic representation on drawings

ISO 9727-1:2007

Cylindrical cork stoppers — Physical tests — Part 1: Determination of dimensions

ISO 12625-17:2021

Tissue paper and tissue products — Part 17: Determination of disintegration in water

ISO 9727-2:2007

Cylindrical cork stoppers — Physical tests — Part 2: Determination of mass and apparent density for agglomerated cork stoppers

ISO 14953:2000

Space systems — Structural design — Determination of loading levels for static qualification testing of launch vehicles

ISO 14946:2021

Small craft — Maximum load capacity

ISO 14622:2000

Space systems — Structural design — Loads and induced environment

ISO 14899:2001

Plastics — Polyols for use in the production of polyurethane — Determination of basicity

ISO 6185-2:2001

Inflatable boats — Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive

ISO 6185-1:2001

Inflatable boats — Part 1: Boats with a maximum motor power rating of 4,5 kW

ISO/IEC 27033-6:2016

Information technology — Security techniques — Network security — Part 6: Securing wireless IP network access

ISO 16653-3:2011

Mobile elevating work platforms — Design, calculations, safety requirements and test methods relative to special features — Part 3: MEWPs for orchard operations

ISO 29262:2011

Production equipment for microsystems — Interface between end effector and handling system

ISO 9727-3:2007

Cylindrical cork stoppers — Physical tests — Part 3: Determination of humidity content

ISO 9727-4:2007

Cylindrical cork stoppers — Physical tests — Part 4: Determination of dimensional recovery after compression

ISO 29473:2010

Fire tests — Uncertainty of measurements in fire tests

ISO 9727-5:2007

Cylindrical cork stoppers — Physical tests — Part 5: Determination of extraction force

ISO 9727-6:2007

Cylindrical cork stoppers — Physical tests — Part 6: Determination of liquid tightness

ISO 11625:2007

Gas cylinders — Safe handling

ISO 9727-7:2007

Cylindrical cork stoppers — Physical tests — Part 7: Determination of dust content

ISO 8017:2007

Tools for moulding — Guide pillars, straight and shouldered, and locating guide pillars, shouldered

ISO/IEC 29169:2016

Information technology — Process assessment — Application of conformity assessment methodology to the assessment to process quality characteristics and organizational maturity

ISO 19347:2015

Synchronous belt drives — Imperial pitch trapezoidal profile system — Belts and pulleys

ISO 14223-2:2010

Radiofrequency identification of animals — Advanced transponders — Part 2: Code and command structure

ISO 702-3:2007

Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 3: Bayonet type

ISO 702-2:2007

Machine tools — Connecting dimensions of spindle noses and work holding chucks — Part 2: Camlock type

ISO 7451:2007

Earth-moving machinery — Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders

ISO 15927-6:2007

Hygrothermal performance of buildings — Calculation and presentation of climatic data — Part 6: Accumulated temperature differences (degree-days)

ISO/TS 10300-20:2021

Calculation of load capacity of bevel gears — Part 20: Calculation of scuffing load capacity — Flash temperature method

ISO 16282:2007

Methods of test for dense shaped refractory products — Determination of resistance to abrasion at ambient temperature

ISO 9073-15:2007

Textiles — Test methods for nonwovens — Part 15: Determination of air permeability

ISO 25297-2:2011

Optics and photonics — Electronic exchange of optical data — Part 2: Mapping to the classes and properties defined in ISO 23584

ISO 5005:1977

Earth-moving machinery — Method for locating the centre of gravity

ISO 8432:1987

Essential oils — Analysis by high performance liquid chromatography — General method

ISO 22442-3:2007

Medical devices utilizing animal tissues and their derivatives — Part 3: Validation of the elimination and/or inactivation of viruses and transmissible spongiform encephalopathy (TSE) agents

ISO 3810:1987

Floor tiles of agglomerated cork — Methods of test

ISO 27269:2021

Health informatics — International patient summary

ISO 21067-2:2015

Packaging — Vocabulary — Part 2: Packaging and the environment terms

ISO 4915:1991

Textiles — Stitch types — Classification and terminology

ISO/TR 20590:2021

Space systems — Space debris mitigation design and operation manual for launch vehicle orbital stages

ISO 16556:2014

Large yachts — Deck equipment — Anchoring equipments

ISO 11940-2:2007

Information and documentation — Transliteration of Thai characters into Latin characters — Part 2: Simplified transcription of Thai language

ISO 20965:2021

Plastics — Determination of the transient extensional viscosity of polymer melts

ISO 7269:1995

Rubber — Determination of free sulfur

ISO/IEC TS 33061:2021

Information technology — Process assessment — Process assessment model for software life cycle processes

ISO 17933:2000

GEDI — Generic Electronic Document Interchange

ISO 23392:2006

Fresh and quick-frozen maize and peas — Determination of alcohol-insoluble solids content

ISO 8283-1:1991

Plastics pipes and fittings — Dimensions of sockets and spigots for discharge systems inside buildings — Part 1: Unplasticized poly(vinyl chloride) (PVC-U) and chlorinated poly (vinyl chloride) (PVC-C)

ISO 13741-2:1998

Plastics/rubber — Polymer dispersions and rubber latices (natural and synthetic) — Determination of residual monomers and other organic components by capillary-column gas chromatography — Part 2: Headspace method

ISO 10140-3:2021

Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation

ISO 10140-5:2021

Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment

ISO 3190:1975

Test conditions for turret and single spindle co-ordinate drilling machines with vertical spindle — Testing of the accuracy

ISO 10767-1:2015

Hydraulic fluid power — Determination of pressure ripple levels generated in systems and components — Part 1: Method for determining source flow ripple and source impedance of pumps

ISO 15654:2015

Fatigue test method for transmission precision roller chains and leaf chains