ISO 9199:1998

Aerospace — Nuts, bihexagonal, self-locking, MJ threads, classifications: 1 100 MPa (at ambient temperature)/425 degrees C, 1 100 MPa (at ambient temperature)/650 degrees C, 1 210 MPa (at ambient temperature)/425 degrees C, 1 210 MPa (at ambient temperature)/730 degrees C, 1 550 MPa (at ambient temperature)/235 degrees C, 1 550 MPa (at ambient temperature)/425 degrees C and 1 550 MPa (at ambient temperature)/600 degrees C — Dimensions

ISO 20299-3:2008

Film for wrapping rubber bales — Part 3: Ethylene-propylene-diene rubber (EPDM), acrylonitrile-butadiene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM)

ISO 24453:2008

Rubber — Acquisition and presentation of comparable single-point data

ISO 11241:1994

Aircraft — Aircraft engine transport devices

ISO 23239-1:2021

Road vehicles — Vehicle domain service (VDS) — Part 1: General information and use case definitions

ISO 29664:2010

Plastics — Artificial weathering including acidic deposition

ISO 8777:1993

Information and documentation — Commands for interactive text searching

ISO/IEC 15938-16:2021

Information technology — Multimedia content description interface — Part 16: Conformance and reference software for compact descriptors for video analysis

ISO 21630:2007

Pumps — Testing — Submersible mixers for wastewater and similar applications

ISO 105-F06:2000

Textiles — Tests for colour fastness — Part F06: Specification for silk adjacent fabric

ISO 14649-111:2010

Industrial automation systems and integration — Physical device control — Data model for computerized numerical controllers — Part 111: Tools for milling machines

ISO 14835-1:2016

Mechanical vibration and shock — Cold provocation tests for the assessment of peripheral vascular function — Part 1: Measurement and evaluation of finger skin temperature

ISO 17575-3:2016

Electronic fee collection — Application interface definition for autonomous systems — Part 3: Context data

ISO 7870-6:2016

Control charts — Part 6: EWMA control charts

ISO 3262-15:2000

Extenders for paints — Specifications and methods of test — Part 15: Vitreous silica

ISO 10334:1994

Implants for surgery — Malleable wires for use as sutures and other surgical applications

ISO 3262-13:1997

Extenders for paints — Specifications and methods of test — Part 13: Natural quartz (ground)

ISO 10227:1996

Human/human surrogate impact (single shock) testing and evaluation — Guidance on technical aspects

ISO 9455-6:1995

Soft soldering fluxes — Test methods — Part 6: Determination and detection of halide (excluding fluoride) content

ISO 10703:2021

Water quality — Gamma-ray emitting radionuclides — Test method using high resolution gamma-ray spectrometry

ISO 12176-4:2003

Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4: Traceability coding

ISO/TS 19857:2021

Paper, board and printing inks – Printability – Laboratory test method for offset ink setting

ISO 619:1981

Manganese ores — Determination of chromium content — Diphenylcarbazide photometric method and silver persulphate titrimetric method

ISO 7278-3:1998

Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 3: Pulse interpolation techniques

ISO 4268:2000

Petroleum and liquid petroleum products — Temperature measurements — Manual methods

ISO/IEC 23000-21:2019/AMD 1:2021

Information technology — Multimedia application format (MPEG-A) — Part 21: Visual identity management application format — Amendment 1: Conformance and reference software

ISO 7278-1:1987

Liquid hydrocarbons — Dynamic measurement — Proving systems for volumetric meters — Part 1: General principles

ISO 3764:2016

Timekeeping instruments — Movements — Types, dimensions and nomenclature

ISO 21925-2:2021

Fire resistance tests — Fire dampers for air distribution systems — Part 2: Intumescent dampers

ISO 10349-13:2002

Photography — Photographic-grade chemicals — Test methods — Part 13: Determination of pH

ISO 11261:1995

Soil quality — Determination of total nitrogen — Modified Kjeldahl method

ISO 17575-2:2016

Electronic fee collection — Application interface definition for autonomous systems — Part 2: Communication and connection to the lower layers

ISO 17575-1:2016

Electronic fee collection — Application interface definition for autonomous systems — Part 1: Charging

ISO 1938-1:2015

Geometrical product specifications (GPS) — Dimensional measuring equipment — Part 1: Plain limit gauges of linear size

ISO 3598:2011

Textile glass — Yarns — Basis for a specification

ISO 16610-60:2015

Geometrical product specification (GPS) — Filtration — Part 60: Linear areal filters — Basic concepts

ISO 8516:2011

Textile glass — Textured yarns — Basis for a specification

ISO 549:1981

Manganese ores — Determination of combined water content — Gravimetric method

ISO 15186-1:2000

Acoustics — Measurement of sound insulation in buildings and of building elements using sound intensity — Part 1: Laboratory measurements

ISO 6461-1:1986

Water quality — Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) — Part 1: Method by enrichment in a liquid medium

Refractory products — Determination of resistance to carbon monoxide

ISO 2131:1972

Surface active agents — Simplified classification

ISO 625:1996

Solid mineral fuels — Determination of carbon and hydrogen — Liebig method

ISO 6502-3:2018

Rubber — Measurement of vulcanization characteristics using curemeters — Part 3: Rotorless curemeter

ISO 10349-8:2002

Photography — Photographic-grade chemicals — Test methods — Part 8: Determination of volatile matter

ISO 10349-1:2002

Photography — Photographic-grade chemicals — Test methods — Part 1: General

IEC 80416-3:2002

Basic principles for graphical symbols for use on equipment — Part 3: Guidelines for the application of graphical symbols

ISO 16016:2016

Technical product documentation — Protection notices for restricting the use of documents and products

ISO 15592-3:2008

Fine-cut tobacco and smoking articles made from it — Methods of sampling, conditioning and analysis — Part 3: Determination of total particulate matter of smoking articles using a routine analytical smoking machine, preparation for the determination of water and nicotine, and calculation of nicotine-free dry particulate matter

ISO 8319-1:1996

Orthopaedic instruments — Drive connections — Part 1: Keys for use with screws with hexagon socket heads

ISO/IEC TR 18047-7:2010

Information technology — Radio frequency identification device conformance test methods — Part 7: Test methods for active air interface communications at 433 MHz

ISO 4119:1995

Pulps — Determination of stock concentration

ISO 16904:2016

Petroleum and natural gas industries — Design and testing of LNG marine transfer arms for conventional onshore terminals

ISO 22413:2021

Transfer sets for pharmaceutical preparations — Requirements and test methods

ISO 3837:1993/AMD 1:2021

Liquid petroleum products — Determination of hydrocarbon types — Fluorescent indicator adsorption method — Amendment 1

ISO 728:2021

Coke — Size analysis by sieving

ISO 4512:2000

Petroleum and liquid petroleum products — Equipment for measurement of liquid levels in storage tanks — Manual methods

ISO/TR 10358:2021

Plastics pipes and fittings for industrial applications — Collection of data on combined chemical-resistance

ISO 6551:1982

Petroleum liquids and gases — Fidelity and security of dynamic measurement — Cabled transmission of electric and/or electronic pulsed data

ISO 14200:2021

Space environment (natural and artificial) — Process-based implementation of meteoroid and debris environment models (orbital altitudes below GEO + 2 000 km)

ISO 3214:2000

Oil of Litsea cubeba (Litsea cubeba Pers.)

ISO 8167:2021

Resistance welding — Embossed projection welding — Projections for resistance welding

ISO 8896:2016

Essential oil of caraway (Carum carvi L.)

ISO 10387:1994

Metal chrome — Specification and conditions of delivery

ISO 175:2010

Plastics — Methods of test for the determination of the effects of immersion in liquid chemicals

ISO 17555:2021

Plastics — Film and sheeting — Biaxially oriented polypropylene (PP) films

ISO 5799:1991

Photography — Direct-exposing medical and dental radiographic film/process systems — Determination of ISO speed and ISO average gradient

ISO 17464:2016

Pneumatic tubes for automotive vehicles — Technical requirements and test methods

ISO 5800:1987

Photography — Colour negative films for still photography — Determination of ISO speed

ISO 21629-1:2021

Bamboo floorings — Part 1: Indoor use

ISO 18421:2016

Ships and marine technology — Inland navigation vessels — Lifebuoy housings

ISO 3467:2016

Machine taper pin reamers with Morse taper shanks

ISO 3466:2016

Machine taper pin reamers with parallel shanks

ISO 7589:2002

Photography — Illuminants for sensitometry — Specifications for daylight, incandescent tungsten and printer

ISO 13431:1999

Geotextiles and geotextile-related products — Determination of tensile creep and creep rupture behaviour

ISO 8661:1988

Caprolactam for industrial use — Determination of volatile bases content — Titrimetric method after distillation

ISO 1172:1996

Textile-glass-reinforced plastics — Prepregs, moulding compounds and laminates — Determination of the textile-glass and mineral-filler content — Calcination methods

ISO 15713:2006

Stationary source emissions — Sampling and determination of gaseous fluoride content

ISO 18564:2016

Machinery for forestry — Noise test code

ISO 12003-2:2021

Tractors for agriculture and forestry — Roll-over protective structures on narrow tractors — Part 2: Rear-mounted ROPS

ISO 4581:1994

Plastics — Styrene/acrylonitrile copolymers — Determination of residual acrylonitrile monomer content — Gas chromatography method

ISO 19813:2006

Road vehicles — Ignition systems — Test methods and requirements for high voltage boots on plug-top coils and pencil coils

ISO 4628-2:2016

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 2: Assessment of degree of blistering

ISO/IEC TR 18047-4:2004

Information technology — Radio frequency identification device conformance test methods — Part 4: Test methods for air interface communications at 2,45 GHz

ISO 8112:1984

Caprolactam for industrial use — Determination of colour of 50 % aqueous caprolactam solution, expressed in Hazen units (platinum-cobalt scale) — Spectrometric method

ISO 21542:2021

Building construction — Accessibility and usability of the built environment

ISO 7989-1:2006

Steel wire and wire products — Non-ferrous metallic coatings on steel wire — Part 1: General principles

ISO 2174:1990

Surface active agents — Preparation of water with known calcium hardness

ISO 9241-391:2016

Ergonomics of human-system interaction — Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures

ISO 4254-14:2016

Agricultural machinery — Safety — Part 14: Bale wrappers

ISO/IEC 39794-16:2021

Information technology — Extensible biometric data interchange formats — Part 16: Full body image data

ISO 9308-3:1998

Water quality — Detection and enumeration of Escherichia coli and coliform bacteria — Part 3: Miniaturized method (Most Probable Number) for the detection and enumeration of E. coli in surface and waste water

ISO 23856:2021

Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage — Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin

ISO 17225-1:2021

Solid biofuels — Fuel specifications and classes — Part 1: General requirements

ISO 7900:2006

Steel wire and wire products for fences — Zinc- and zinc-alloy-coated steel barbed wire

ISO 23671:2021

Passenger car tyres — Method for measuring relative wet grip performance — Loaded new tyres

ISO 27145-4:2016

Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 4: Connection between vehicle and test equipment

ISO 11455:1995

Raw optical glass — Determination of birefringence

ISO 6235:2016

Rubber, raw — Determination of block polystyrene content — Ozonolysis method

ISO 12268:1997

Aerospace — Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 degrees C, 600 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/315 degrees C, 600 MPa (at ambient temperature)/650 degrees C, 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/730 degrees C and 1 100 MPa (at ambient temperature)/600 degrees C — Dimensions

ISO 15513:2000

Cranes — Competency requirements for crane drivers (operators), slingers, signallers and assessors

ISO 16631:2016

Ductile iron pipes, fittings, accessories and their joints compatible with plastic (PVC or PE) piping systems, for water applications and for plastic pipeline connections, repair and replacement

ISO 11119-4:2016

Gas cylinders — Refillable composite gas cylinders — Design, construction and testing — Part 4: Fully wrapped fibre reinforced composite gas cylinders up to 150 l with load-sharing welded metallic liners

ISO 20257-2:2021

Installation and equipment for liquefied natural gas — Design of floating LNG installations — Part 2: Specific FSRU issues

ISO 1420:2016

Rubber- or plastics-coated fabrics — Determination of resistance to penetration by water

ISO 11466:1995

Soil quality — Extraction of trace elements soluble in aqua regia

ISO 16773-2:2016

Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 2: Collection of data

ISO 21919-2:2021

Physical device control — Interfaces for automated machine tending — Part 2: Safety and control interface

ISO 16368:2010

Mobile elevating work platforms — Design, calculations, safety requirements and test methods

ISO 16773-1:2016

Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 1: Terms and definitions

ISO 4374:1990

Liquid flow measurement in open channels — Round-nose horizontal broad-crested weirs

ISO 4571:1981

Manganese ores and concentrates — Determination of potassium and sodium content — Flame atomic emission spectrometric method

ISO 10327:2014

Air cargo — Main deck containers — Design and testing

ISO/TR 15801:2017

Document management — Electronically stored information — Recommendations for trustworthiness and reliability

ISO 12721:2000

Non-destructive testing — Thermal neutron radiographic testing — Determination of beam L/D ratio

ISO 2692:2021

Geometrical product specifications (GPS) — Geometrical tolerancing — Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR)

ISO/IEC 39794-9:2021

Information technology — Extensible biometric data interchange formats — Part 9: Vascular image data

ISO 9268:1988

Implants for surgery — Metal bone screws with conical under-surface of head — Dimensions

ISO 15076-1:2010

Image technology colour management — Architecture, profile format and data structure — Part 1: Based on ICC.1:2010

ISO 226:2003

Acoustics — Normal equal-loudness-level contours

ISO 3735:1999

Crude petroleum and fuel oils — Determination of sediment — Extraction method

ISO 9269:1988

Implants for surgery — Metal bone plates — Holes and slots corresponding to screws with conical under-surface

ISO 7899-1:1998

Water quality — Detection and enumeration of intestinal enterococci — Part 1: Miniaturized method (Most Probable Number) for surface and waste water

ISO 7899-2:2000

Water quality — Detection and enumeration of intestinal enterococci — Part 2: Membrane filtration method

ISO 20743:2021

Textiles — Determination of antibacterial activity of textile products

ISO 4293:1982

Manganese ores and concentrates — Determination of phosphorus content — Extraction-molybdovanadate photometric method

ISO 5667-21:2010

Water quality — Sampling — Part 21: Guidance on sampling of drinking water distributed by tankers or means other than distribution pipes

ISO 9692-2:1998

Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels

ISO 4295:1988

Manganese ores and concentrates — Determination of aluminium content — Photometric and gravimetric methods