ISO 8541:1986

Manganese and chromium ores — Experimental methods for checking the bias of sampling and sample preparation

ISO 13142:2021

Optics and photonics — Lasers and laser-related equipment — Cavity ring-down method for high-reflectance and high-transmittance measurements

ISO 11344:2016

Rubber, raw synthetic — Determination of the molecular-mass distribution of solution polymers by gel permeation chromatography

ISO 10368:2006

Freight thermal containers — Remote condition monitoring

ISO 13860:2016

Machinery for forestry — Forwarders — Terms, definitions and commercial specifications

ISO/IEC TR 18001:2004

Information technology — Radio frequency identification for item management — Application requirements profiles

ISO 4900:2011

Textile glass — Mats and fabrics — Determination of contact mouldability

ISO 249:2016

Rubber, raw natural — Determination of dirt content

ISO 418:2001

Photography — Processing chemicals — Specifications for anhydrous sodium sulfite

ISO/IEC 15411:1999

Information technology — Segmented keyboard layouts

ISO/IEC 15412:1999

Information technology — Portable computer keyboard layouts

ISO 2559:2011

Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications

ISO/TS 21619:2018

Geometrical product specifications (GPS) — Types of documents with GPS

ISO 4604:2011

Reinforcement fabrics — Determination of conventional flexural stiffness — Fixed-angle flexometer method

ISO 3342:2011

Textile glass — Mats — Determination of tensile breaking force

ISO 15178:2000

Soil quality — Determination of total sulfur by dry combustion

ISO 3627:2001

Photography — Processing chemicals — Specifications for anhydrous sodium metabisulfite

ISO 11074:2015

Soil quality — Vocabulary

ISO 3629:2000

Photography — Processing chemicals — Specifications for potassium metabisulfite

ISO/TS 12720:2014

Sustainability in buildings and civil engineering works — Guidelines on the application of the general principles in ISO 15392

ISO 4047:1977

Leather — Determination of sulphated total ash and sulphated water-insoluble ash

ISO 16869:2008

Plastics — Assessment of the effectiveness of fungistatic compounds in plastics formulations

ISO 7481:2000

Aerospace — Nuts, self-locking, with maximum operating temperature less than or equal to 425 degrees C — Test methods

ISO 5975:1983

Chromium ores — Determination of calcium and magnesium contents — EDTA titrimetric method

ISO 3159:2009

Timekeeping instruments — Wrist-chronometers with spring balance oscillator

ISO 2113:1996

Reinforcement fibres — Woven fabrics — Basis for a specification

ISO 1183-3:1999

Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method

ISO 19027:2016

Design principles for communication support board using pictorial symbols

ISO 19028:2016

Accessible design — Information contents, figuration and display methods of tactile guide maps

ISO 10640:2011

Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy

ISO 3225:1998

Aerospace — Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

ISO/TS 16550:2014

Nanotechnologies — Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus

ISO 3224:1998

Aerospace — Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

ISO 291:2008

Plastics — Standard atmospheres for conditioning and testing

ISO 18541-1:2021

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 1: General information and use case definition

ISO 18541-2:2021

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 2: Technical requirements

ISO 18541-3:2021

Road vehicles — Standardized access to automotive repair and maintenance information (RMI) — Part 3: Functional user interface requirements

ISO 7723:1984

Manganese ores and concentrates — Determination of titanium content — 4,4'-Diantipyrylmethane spectrometric method

ISO 5838-2:1991

Implants for surgery — Skeletal pins and wires — Part 2: Steinmann skeletal pins — Dimensions

ISO 5838-3:1993

Implants for surgery — Skeletal pins and wires — Part 3: Kirschner skeletal wires

ISO 8530:1986

Manganese and chromium ores — Experimental methods for checking the precision of sample division

ISO 9140:1998

Aerospace — Nuts, plain or slotted (castellated) — Test methods

ISO 9139:1998

Aerospace — Nuts, plain or slotted (castellated) — Procurement specification

ISO 17889-1:2021

Ceramic tiling systems — Sustainability for ceramic tiles and installation materials — Part 1: Specification for ceramic tiles

IEC 62752:2016

In-Cable Control and Protection Device for mode 2 charging of electric road vehicles (IC-CPD)

ISO 4139:1979

Ferrosilicon — Determination of aluminium content — Flame atomic absorption spectrometric method

ISO 8531:1986

Manganese and chromium ores — Experimental methods for checking the precision of moisture determination

ISO 1268-1:2001

Fibre-reinforced plastics — Methods of producing test plates — Part 1: General conditions

ISO/TS 22693:2021

Genomics informatics — Structured clinical gene fusion report in electronic health records

ISO 5349-2:2001

Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace

ISO 12609-2:2013

Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 2: Guidance for use

ISO 8374:2001

Photography — Determination of ISO safelight conditions

ISO/IEC GUIDE 98-4:2012

Uncertainty of measurement — Part 4: Role of measurement uncertainty in conformity assessment

ISO 10869:2010

Oil of fir needle, Siberian (Abies sibirica Ledeb.)

ISO 6849:1996

Photography — Processing wastes — Determination of boron

ISO 1657:1986

Rubber, raw and rubber latex — Determination of iron content — 1,10-Phenanthroline photometric method

ISO 2300:1973

Sawn timber of broadleaved species — Defects — Terms and definitions

ISO 4628-1:2016

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system

ISO 12460-4:2016

Wood-based panels — Determination of formaldehyde release — Part 4: Desiccator method

ISO 19475:2021

Document management — Minimum requirements for the storage of documents

ISO 6518-2:1995

Road vehicles — Ignition systems — Part 2: Electrical performance and function test methods

ISO 17564:2008

Raw hydrogenated nitrile rubber (HNBR) — Determination of residual unsaturation by iodine value

ISO 6127:1981

Chromium ores — Determination of phosphorus content — Reduced molybdophosphate photometric method

ISO 6129:1981

Chromium ores — Determination of hygroscopic moisture content in analytical samples — Gravimetric method

ISO 6130:1985

Chromium ores — Determination of total iron content — Titrimetric method after reduction

ISO 7004:2002

Photography — Industrial radiographic films — Determination of ISO speed, ISO average gradient and ISO gradients G2 and G4 when exposed to X- and gamma-radiation

ISO 18447:2021

Tea — Determination of theaflavins in black tea — Method using high performance liquid chromatography

ISO 1272:2000

Essential oils — Determination of content of phenols

ISO 13879:1999

Petroleum and natural gas industries — Content and drafting of a functional specification

ISO 15700:1998

Leather — Tests for colour fastness — Colour fastness to water spotting

ISO 10330:2002

Photography — Synchronizers, ignition circuits and connectors for cameras and photoflash units — Electrical characteristics and test methods

ISO 9996:1996

Mechanical vibration and shock — Disturbance to human activity and performance — Classification

ISO 6053:1979

Photography — Shutter cable release tip and socket — Dimensions

ISO 16773-3:2016

Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens — Part 3: Processing and analysis of data from dummy cells

ISO/TS 15768:2000

Measurement of liquid velocity in open channels — Design, selection and use of electromagnetic current meters

ISO 27727:2008

Rubber, vulcanized — Measurement of fatigue crack growth rate

ISO 3262-2:1998

Extenders for paints — Specifications and methods of test — Part 2: Barytes (natural barium sulfate)

ISO 18388:2016

Technical product documentation (TPD) — Relief grooves — Types and dimensioning

ISO 22453:2021

Exchange of information on rare earth elements in industrial wastes and end-of-life cycled products

ISO 1675:1985

Plastics — Liquid resins — Determination of density by the pyknometer method

ISO 13999-1:1999

Protective clothing — Gloves and arm guards protecting against cuts and stabs by hand knives — Part 1: Chain-mail gloves and arm guards

ISO 10545-15:2021

Ceramic tiles — Part 15: Determination of lead and cadmium given off by tiles

ISO 7692:1983

Ferrotitanium — Determination of titanium content — Titrimetric method

ISO 9241-129:2010

Ergonomics of human-system interaction — Part 129: Guidance on software individualization

ISO 6984:1990

Round non-alloy steel wires for stranded wire ropes for mine hoisting — Specifications

ISO 7693:1984

Ferrotungsten — Determination of tungsten content — Cinchonine gravimetric method

ISO 7829:1986

Photography — Black-and-white aerial camera films — Determination of ISO speed and average gradient

ISO 7087:1984

Ferroalloys — Experimental methods for the evaluation of the quality variation and methods for checking the precision of sampling

ISO 3262-11:2000

Extenders for paints — Specifications and methods of test — Part 11: Natural talc, in lamellar form, containing carbonates

ISO/IEC 30134-1:2016

Information technology — Data centres — Key performance indicators — Part 1: Overview and general requirements

ISO 18397:2016

Dentistry — Powered scaler

ISO 18362:2016

Manufacture of cell-based health care products — Control of microbial risks during processing

ISO 12219-10:2021

Interior air of road vehicles — Part 10: Whole vehicle test chamber — Specification and methods for the determination of volatile organic compounds in cabin interiors — Trucks and buses

ISO 24490:2016

Cryogenic vessels — Pumps for cryogenic service

ISO 3262-9:1997

Extenders for paints — Specifications and methods of test — Part 9: Calcined clay

ISO 3262-4:1998

Extenders for paints — Specifications and methods of test — Part 4: Whiting

ISO 2631-4:2001

Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems

ISO 12492:2012

Rubber, raw — Determination of water content by Karl Fischer method

ISO/IEC 14496-29:2015

Information technology — Coding of audio-visual objects — Part 29: Web video coding

ISO/IEC TR 24720:2008

Information technology — Automatic identification and data capture techniques — Guidelines for direct part marking (DPM)

ISO 1133-2:2011

Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 2: Method for materials sensitive to time-temperature history and/or moisture

ISO 3630-3:2021

Dentistry — Endodontic instruments — Part 3: Compactors

ISO 4391:1983

Hydraulic fluid power — Pumps, motors and integral transmissions — Parameter definitions and letter symbols

ISO 9195:1992

Liquid flow measurement in open channels — Sampling and analysis of gravel-bed material

ISO/IEC TR 29162:2012

Information technology — Guidelines for using data structures in AIDC media

ISO/TS 24530-4:2006

Traffic and Travel Information (TTI) — TTI via Transport Protocol Experts Group (TPEG) Extensible Markup Language (XML) — Part 4: tpeg-ptiML

ISO 9292:1988

Manganese ores and concentrates — Determination of total iron content — 1,10-Phenanthroline spectrometric method

ISO 9200:1993

Crude petroleum and liquid petroleum products — Volumetric metering of viscous hydrocarbons

ISO 6916-2:2001

Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 2: Mouldings and extrusions

ISO 3527:2016

Essential oil of parsley fruits (Petroselinum sativum Hoffm.)

ISO 62:2008

Plastics — Determination of water absorption

ISO 1268-7:2001

Fibre-reinforced plastics — Methods of producing test plates — Part 7: Resin transfer moulding

ISO 1268-5:2001

Fibre-reinforced plastics — Methods of producing test plates — Part 5: Filament winding

ISO 6520-1:2007

Welding and allied processes — Classification of geometric imperfections in metallic materials — Part 1: Fusion welding

ISO 1009:2000

Photography — Paper dimensions — Rolls for printers

ISO 8537:2016

Sterile single-use syringes, with or without needle, for insulin

ISO 1268-2:2001

Fibre-reinforced plastics — Methods of producing test plates — Part 2: Contact and spray-up moulding

ISO 17916:2016

Safety of thermal cutting machines

ISO 3733:1999

Petroleum products and bituminous materials — Determination of water — Distillation method

ISO 14558:2016

Rubber — Determination of residual unsaturation of hydrogenated nitrile butadiene rubber (HNBR) by infrared spectroscopy

ISO 17211:2015

Stationary source emissions — Sampling and determination of selenium compounds in flue gas

ISO 6779:2019

Test conditions for vertical internal type broaching machines — Testing of accuracy

ISO 3262-16:2000

Extenders for paints — Specifications and methods of test — Part 16: Aluminium hydroxides

ISO 3662:1976

Hydraulic fluid power — Pumps and motors — Geometric displacements

ISO 11193-2:2006

Single-use medical examination gloves — Part 2: Specification for gloves made from poly(vinyl chloride)

ISO 3191:1998

Aerospace — Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

ISO 22156:2021

Bamboo structures — Bamboo culms — Structural design

ISO 23529:2016

Rubber — General procedures for preparing and conditioning test pieces for physical test methods

ISO 10695:2000

Water quality — Determination of selected organic nitrogen and phosphorus compounds — Gas chromatographic methods

ISO 15361:2000

Pulps — Determination of zero-span tensile strength, wet or dry

ISO 12083:1994

Information and documentation — Electronic manuscript preparation and markup

IEC/TS 80004-9:2017

Nanotechnologies — Vocabulary — Part 9: Nano-enabled electrotechnical products and systems

ISO 10315:2021

Cigarettes — Determination of nicotine in total particulate matter from the mainstream smoke — Gas-chromatographic method

ISO 9705-1:2016

Reaction to fire tests — Room corner test for wall and ceiling lining products — Part 1: Test method for a small room configuration

ISO 15360-1:2000

Recycled pulps — Estimation of Stickies and Plastics — Part 1: Visual method

ISO 11566:1996

Carbon fibre — Determination of the tensile properties of single-filament specimens