ISO/IEC 20970:2002

Information technology -- Programming languages, their environments and system software interfaces -- JEFF file format

ISO 4210-9:2014

Cycles -- Safety requirements for bicycles -- Part 9: Saddles and seat-post test methods

ISO 21618:2019

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for fracture resistance of monolithic ceramics at room temperature by indentation fracture (IF) method

ISO 9092:2019

Nonwovens -- Vocabulary

ISO 13993:2019

Rental ski shop practice -- Sampling and inspection of complete and incomplete alpine ski-binding-boot systems in rental applications

ISO 16055:2019

Tobacco and tobacco products -- Monitor test piece -- Requirements and use

ISO 13276:2017

Tobacco and tobacco products -- Determination of nicotine purity -- Gravimetric method using tungstosilicic acid

ISO 16578:2013

Molecular biomarker analysis -- General definitions and requirements for microarray detection of specific nucleic acid sequences

ISO 11413:2019

Plastics pipes and fittings -- Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting

ISO 10565:1998

Oilseeds -- Simultaneous determination of oil and water contents -- Method using pulsed nuclear magnetic resonance spectrometry

ISO 23551-9:2015

Safety and control devices for gas burners and gas-burning appliances -- Particular requirements -- Part 9: Mechanical gas thermostats

ISO 10726:1992

Portable chain saws -- Chain catcher -- Dimensions and mechanical strength

ISO 7551:1996

Dental absorbent points

ISO 13495:2013

Foodstuffs -- Principles of selection and criteria of validation for varietal identification methods using specific nucleic acid

ISO 8302:1991

Thermal insulation -- Determination of steady-state thermal resistance and related properties -- Guarded hot plate apparatus

ISO 10720:1997

Steel and iron -- Determination of nitrogen content -- Thermal conductimetric method after fusion in a current of inert gas

ISO 3969:1979

Shipbuilding -- Inland vessels -- Operational documentation

ISO/IEC 13818-11:2004

Information technology -- Generic coding of moving pictures and associated audio information -- Part 11: IPMP on MPEG-2 systems

ISO/IEC TR 23050:2019

Information technology -- Data centres -- Impact on data centre resource metrics of electrical energy storage and export

ISO 9862:2005

Geosynthetics -- Sampling and preparation of test specimens

ISO 4491-3:1997

Metallic powders -- Determination of oxygen content by reduction methods -- Part 3: Hydrogen-reducible oxygen

ISO 20346:2014

Personal protective equipment -- Protective footwear

ISO 4491-2:1997

Metallic powders -- Determination of oxygen content by reduction methods -- Part 2: Loss of mass on hydrogen reduction (hydrogen loss)

ISO 12584:2013

Aerospace -- Hydraulic fluid components -- Expression of particulate contamination levels

ISO 9864:2005

Geosynthetics -- Test method for the determination of mass per unit area of geotextiles and geotextile-related products

ISO 9241-13:1998

Ergonomic requirements for office work with visual display terminals (VDTs) -- Part 13: User guidance

ISO/TS 11669:2012

Translation projects -- General guidance

ISO/TS 16976-3:2019

Respiratory protective devices -- Human factors -- Part 3: Physiological responses and limitations of oxygen and limitations of carbon dioxide in the breathing environment

ISO 248-2:2019

Rubber, raw -- Determination of volatile-matter content -- Part 2: Thermogravimetric methods using an automatic analyser with an infrared drying unit

ISO 2303:2019

Isoprene rubber (IR) -- Non-oil-extended, solution-polymerized types -- Evaluation procedures

ISO 1181:2004

Fibre ropes -- Manila and sisal -- 3-, 4- and 8-strand ropes

ISO/IEC/IEEE 15026-1:2019

Systems and software engineering -- Systems and software assurance -- Part 1: Concepts and vocabulary

ISO/IEC 23001-3:2008

Information technology -- MPEG systems technologies -- Part 3: XML IPMP messages

ISO 1969:2004

Fibre ropes -- Polyethylene -- 3- and 4-strand ropes

ISO 22266-1:2009

Mechanical vibration -- Torsional vibration of rotating machinery -- Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW

ISO 6474-2:2019

Implants for surgery -- Ceramic materials -- Part 2: Composite materials based on a high-purity alumina matrix with zirconia reinforcement

ISO 9393-1:2004

Thermoplastics valves for industrial applications -- Pressure test methods and requirements -- Part 1: General

ISO/IEC 24730-62:2013

Information technology -- Real time locating systems (RTLS) -- Part 62: High rate pulse repetition frequency Ultra Wide Band (UWB) air interface

ISO/IEC 24730-61:2013

Information technology -- Real time locating systems (RTLS) -- Part 61: Low rate pulse repetition frequency Ultra Wide Band (UWB) air interface

ISO 8283-4:1992

Plastics pipes and fittings -- Dimensions of sockets and spigots for discharge systems inside buildings -- Part 4: Acrylonitrile/butadiene/styrene (ABS)

ISO 10878:2013

Non-destructive testing -- Infrared thermography -- Vocabulary

ISO 1179-1:2013

Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 1: Threaded ports

ISO 8098:2014

Cycles -- Safety requirements for bicycles for young children

ISO 12010:2019

Water quality -- Determination of short-chain polychlorinated alkanes (SCCP) in water -- Method using gas chromatography-mass spectrometry (GC-MS) and negative-ion chemical ionization (NCI)

ISO 2445:1972

Joints in building -- Fundamental principles for design

ISO/TS 16976-4:2019

Respiratory protective devices -- Human factors -- Part 4: Work of breathing and breathing resistance: Physiologically based limits

ISO 1968:2004

Fibre ropes and cordage -- Vocabulary

ISO 4880:1997

Burning behaviour of textiles and textile products -- Vocabulary

ISO 13900:1997

Steel -- Determination of boron content -- Curcumin spectrophotometric method after distillation

ISO 13902:1997

Steel and iron -- Determination of high sulfur content -- Infrared absorption method after combustion in an induction furnace

ISO/IEC 21000-3:2003

Information technology -- Multimedia framework (MPEG-21) -- Part 3: Digital Item Identification

ISO 6931-2:2005

Stainless steels for springs -- Part 2: Narrow strip

ISO/TS 29041:2008

Gas mixtures -- Gravimetric preparation -- Mastering correlations in composition

ISO 8981:1993

Wheat -- Identification of varieties by electrophoresis

ISO 17682:2013

Ships and marine technology -- Methodology for ship launching utilizing air bags

ISO 10713:1992

Jewellery -- Gold alloy coatings

ISO 10714:1992

Steel and iron -- Determination of phosphorus content -- Phosphovanadomolybdate spectrophotometric method

ISO 2199:1972

Sodium hydrogen carbonate for industrial use -- Determination of sodium hydrogen carbonate content -- Titrimetric method

ISO 3158:1976

Timekeeping instruments -- Symbolization of control positions

ISO/TS 18110:2015

Nanotechnologies -- Vocabularies for science, technology and innovation indicators

ISO 6577:2002

Nutmeg, whole or broken, and mace, whole or in pieces (Myristica fragrans Houtt.) -- Specification

ISO 18115-2:2013

Surface chemical analysis -- Vocabulary -- Part 2: Terms used in scanning-probe microscopy

ISO 2203:1973

Technical drawings -- Conventional representation of gears

ISO 11922-2:1997

Thermoplastics pipes for the conveyance of fluids -- Dimensions and tolerances -- Part 2: Inch-based series

ISO 17131:2012

Leather - Identification of leather with microscopy

ISO 15628:2013

Intelligent transport systems -- Dedicated short range communication (DSRC) -- DSRC application layer

ISO 19349:2019

Plain bearings with liquid lubrication -- Lubricant supply arrangements and monitoring

ISO 20483:2013

Cereals and pulses -- Determination of the nitrogen content and calculation of the crude protein content -- Kjeldahl method

ISO/IEC 15444-6:2013

Information technology -- JPEG 2000 image coding system -- Part 6: Compound image file format

ISO/TS 16179:2012

Footwear -- Critical substances potentially present in footwear and footwear components -- Determination of organotin compounds in footwear materials

ISO 7927-1:1987

Fennel seed, whole or ground (powdered) -- Part 1: Bitter fennel seed (Foeniculum vulgare P. Miller var. vulgare) -- Specification

ISO 22958:2005

Textiles -- Water resistance -- Rain tests: exposure to a horizontal water spray

ISO 13688:2013

Protective clothing -- General requirements

ISO 7103:1982

Liquefied anhydrous ammonia for industrial use -- Sampling -- Taking a laboratory sample

ISO 7105:1985

Liquefied anhydrous ammonia for industrial use -- Determination of water content -- Karl Fischer method

ISO 2460:1973

Sodium hydrogen carbonate for industrial use -- Determination of iron content -- 1,10- Phenanthroline photometric method

ISO 3323:1987

Aircraft -- Hydraulic components -- Marking to indicate fluid for which component is approved

ISO 2462:1973

Sodium chlorate for industrial use -- Determination of moisture content -- Gravimetric method

ISO 2461:1973

Sodium chlorate for industrial use -- Determination of matter insoluble in water

ISO 7108:1985

Ammonia solution for industrial use -- Determination of ammonia content -- Titrimetric method

ISO 7109:1985

Ammonia solution for industrial use -- Determination of residue after evaporation at 105 degrees C -- Gravimetric method

ISO 2463:1973

Sodium chlorate for industrial use -- Determination of chloride content -- Mercurimetric method

ISO 7106:1985

Liquefied anhydrous ammonia for industrial use -- Determination of oil content -- Gravimetric and infra-red spectrometric methods

ISO 6050:1987

Shipbuilding -- Bulbous bow and side thruster symbols

ISO/TS 19336:2015

Fibre ropes for offshore station keeping -- Polyarylate

ISO/IEC TS 18661-3:2015

Information Technology -- Programming languages, their environments, and system software interfaces -- Floating-point extensions for C -- Part 3: Interchange and extended types

ISO/TS 16843-5:2019

Health Informatics -- Categorial structures for representation of acupuncture -- Part 5: Cupping

ISO 17925:2004

Zinc and/or aluminium based coatings on steel -- Determination of coating mass per unit area and chemical composition -- Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry

ISO 1773:1997

Laboratory glassware -- Narrow-necked boiling flasks

ISO/TS 16996:2015

Solid biofuels -- Determination of elemental composition by X-ray fluorescence

ISO/IEC TS 18661-4:2015

Information Technology -- Programming languages, their environments, and system software interfaces -- Floating-point extensions for C -- Part 4: Supplementary functions

ISO 17049:2013

Accessible design -- Application of braille on signage, equipment and appliances

ISO 13003:2003

Fibre-reinforced plastics -- Determination of fatigue properties under cyclic loading conditions

ISO 6935-1:2007

Steel for the reinforcement of concrete -- Part 1: Plain bars

ISO 18431-2:2004

Mechanical vibration and shock -- Signal processing -- Part 2: Time domain windows for Fourier Transform analysis

ISO 18431-1:2005

Mechanical vibration and shock -- Signal processing -- Part 1: General introduction

ISO 18437-3:2005

Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 3: Cantilever shear beam method

ISO 18437-2:2005

Mechanical vibration and shock -- Characterization of the dynamic mechanical properties of visco-elastic materials -- Part 2: Resonance method

ISO/TS 17920:2015

Fibre ropes for offshore stationkeeping -- Aramid

ISO 15081:2011

Agricultural equipment -- Graphical symbols for pressurized irrigation systems

ISO 2254:2004

Cloves, whole and ground (powdered) -- Specification

ISO 15886-3:2012

Agricultural irrigation equipment -- Sprinklers -- Part 3: Characterization of distribution and test methods

ISO 15886-1:2012

Agricultural irrigation equipment -- Sprinklers -- Part 1: Definition of terms and classification

ISO 3332:1975

Ammonium sulphate for industrial use -- Determination of ammoniacal nitrogen content -- Titrimetric method after distillation

ISO 2017-1:2005

Mechanical vibration and shock -- Resilient mounting systems -- Part 1: Technical information to be exchanged for the application of isolation systems

ISO/TS 25740-1:2011

Safety requirements for escalators and moving walks -- Part 1: Global essential safety requirements (GESR)

ISO/IEC TS 29113:2012

Information technology -- Further interoperability of Fortran with C

ISO 2466:1973

Potassium hydroxide for industrial use -- Sampling -- Test sample -- Preparation of the main solution for carrying out certain determinations

ISO 5084:1996

Textiles -- Determination of thickness of textiles and textile products

ISO 580:2005

Plastics piping and ducting systems -- Injection-moulded thermoplastics fittings -- Methods for visually assessing the effects of heating

ISO 5815-2:2003

Water quality -- Determination of biochemical oxygen demand after n days (BODn) -- Part 2: Method for undiluted samples

ISO/IEC 21992:2003

Information technology -- Telecommunications and information exchange between systems -- Private Integrated Services Network -- Mapping functions for the tunnelling of QSIG through IP networks

ISO 16322-1:2005

Textiles -- Determination of spirality after laundering -- Part 1: Percentage of wale spirality change in knitted garments

ISO 5636-3:2013

Paper and board -- Determination of air permeance (medium range) -- Part 3: Bendtsen method

ISO/IEC 10967-3:2006

Information technology -- Language independent arithmetic -- Part 3: Complex integer and floating point arithmetic and complex elementary numerical functions

ISO 5797:2004

Ships and marine technology -- Windows and side scuttles for fire-resistant constructions

ISO 7176-7:1998

Wheelchairs -- Part 7: Measurement of seating and wheel dimensions

ISO 7176-15:1996

Wheelchairs -- Part 15: Requirements for information disclosure, documentation and labelling

ISO/TS 15624:2001

Transport information and control systems -- Traffic Impediment Warning Systems (TIWS) -- System requirements

ISO 3797:1976

Shipbuilding -- Vertical steel ladders

ISO 8579-1:2002

Acceptance code for gear units -- Part 1: Test code for airborne sound

ISO 17884:2004

Ships and marine technology -- Searchlights for high-speed craft

ISO/IEC 15938-5:2003

Information technology -- Multimedia content description interface -- Part 5: Multimedia description schemes

ISO 9873:2019

Dentistry -- Intra-oral mirrors

ISO/IEC 13818-2:2013

Information technology -- Generic coding of moving pictures and associated audio information -- Part 2: Video

ISO 2772:2019

Test conditions for box type vertical drilling machines -- Testing of the accuracy

ISO 14644-7:2004

Cleanrooms and associated controlled environments -- Part 7: Separative devices (clean air hoods, gloveboxes, isolators and mini-environments)

ISO 2964:1985

Aerospace -- Tubing -- Outside diameters and thicknesses -- Metric dimensions

ISO 9808:1990

Solar water heaters -- Elastomeric materials for absorbers, connecting pipes and fittings -- Method of assessment

ISO 1663:2007

Rigid cellular plastics -- Determination of water vapour transmission properties

ISO 21614:2008

Determination of carbon content of UO2, (U, Gd)O2 and (U, Pu)O2 powders and sintered pellets -- Combustion in a high-frequency induction furnace -- Infrared absorption spectrometry

ISO 3868:1976

Metallic and other non-organic coatings -- Measurement of coating thicknesses -- Fizeau multiple-beam interferometry method

ISO 17489:2013

Leather -- Chemical tests -- Determination of tan content in synthetic tanning agents

ISO 12468-1:2013

External exposure of roofs to fire -- Part 1: Test method

ISO 1268-4:2005

Fibre-reinforced plastics -- Methods of producing test plates -- Part 4: Moulding of prepregs

ISO 5348:1998

Mechanical vibration and shock -- Mechanical mounting of accelerometers

ISO 10472-5:1997

Safety requirements for industrial laundry machinery -- Part 5: Flatwork ironers, feeders and folders

ISO 10472-1:1997

Safety requirements for industrial laundry machinery -- Part 1: Common requirements

ISO 10472-2:1997

Safety requirements for industrial laundry machinery -- Part 2: Washing machines and washer-extractors

ISO 22188:2004

Monitoring for inadvertent movement and illicit trafficking of radioactive material

ISO 10472-3:1997

Safety requirements for industrial laundry machinery -- Part 3: Washing tunnel lines including component machines

ISO 10359-1:1992

Water quality -- Determination of fluoride -- Part 1: Electrochemical probe method for potable and lightly polluted water

ISO 10472-4:1997

Safety requirements for industrial laundry machinery -- Part 4: Air dryers

ISO 3948:1977

Shipbuilding -- Inland vessels -- Compressed-air systems -- Pressure ranges

ISO 22700:2019

Leather -- Measuring the colour and colour difference of finished leather

ISO 2553:2019

Welding and allied processes -- Symbolic representation on drawings -- Welded joints

ISO 13328:2000

Motorcycle tyres -- Measurement of tyre rolling circumference -- Loaded new tyres

ISO/ASTM 52701:2013

Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing

ISO 17304:2013

Dentistry -- Polymerization shrinkage: Method for determination of polymerization shrinkage of polymer-based restorative materials

ISO/IEC TS 18508:2015

Information technology -- Additional Parallel Features in Fortran

ISO 1179-2:2013

Connections for general use and fluid power -- Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing -- Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)

ISO 3452-3:2013

Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks

ISO 15926-1:2004

Industrial automation systems and integration -- Integration of life-cycle data for process plants including oil and gas production facilities -- Part 1: Overview and fundamental principles

ISO 9841:2013

Essential oil of hyssop (Hyssopus officinalis L. ssp. officinalis)

ISO 5779:1987

Shipbuilding -- Ordinary rectangular windows -- Positioning

ISO 5780:1987

Shipbuilding -- Side scuttles -- Positioning

ISO 13007-2:2013

Ceramic tiles -- Grouts and adhesives -- Part 2: Test methods for adhesives

ISO/IEC 19775-1:2013

Information technology -- Computer graphics, image processing and environmental data representation -- Extensible 3D (X3D) -- Part 1: Architecture and base components

ISO 8084:2003

Machinery for forestry -- Operator protective structures -- Laboratory tests and performance requirements

ISO 24535:2007

Intelligent transport systems -- Automatic vehicle identification -- Basic electronic registration identification (Basic ERI)

ISO 3739-2:1992

Industrial tyres and rims -- Part 2: Pneumatic tyres (metric series) on 5 degrees tapered or flat base rims -- Load ratings

ISO 17294-1:2004

Water quality -- Application of inductively coupled plasma mass spectrometry (ICP-MS) -- Part 1: General guidelines

ISO/TR 16494-2:2019

Heat recovery ventilators and energy recovery ventilators -- Method of test for performance -- Part 2: Assessment of measurement uncertainty of performance parameters

ISO 17899:2004

Ships and marine technology -- Marine electric window wipers

ISO 24678-7:2019

Fire safety engineering -- Requirements governing algebraic formulae -- Part 7: Radiation heat flux received from an open pool fire

ISO 3199:1975

Sodium chlorate for industrial use -- Determination of chlorate content -- Dichromate titrimetric method

ISO 12725:2019

Nickel and nickel alloy castings

ISO/ASTM 51401:2013

Practice for use of a dichromate dosimetry system

ISO 18246:2015

Electrically propelled mopeds and motorcycles -- Safety requirements for conductive connection to an external electric power supply

ISO 8573-6:2003

Compressed air -- Part 6: Test methods for gaseous contaminant content

ISO 15537:2004

Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs

ISO/IEC 13250-3:2013

Information technology -- Topic Maps -- Part 3: XML syntax

ISO 8165-1:1992

Water quality -- Determination of selected monovalent phenols -- Part 1: Gas-chromatographic method after enrichment by extraction

ISO 12004-1:2008

Metallic materials -- Sheet and strip -- Determination of forming-limit curves -- Part 1: Measurement and application of forming-limit diagrams in the press shop

ISO/IEC/IEEE 8802-1Q:2016

Information technology -- Telecommunications and information exchange between systems -- Local and metropolitan area networks -- Specific requirements -- Part 1Q: Bridges and bridged networks

ISO 11933-2:1997

Components for containment enclosures -- Part 2: Gloves, welded bags, gaiters for remote - handling tongs and for manipulators

ISO 15686-2:2012

Buildings and constructed assets -- Service life planning -- Part 2: Service life prediction procedures

ISO/TR 22086-1:2019

Intelligent transport systems (ITS) -- Network based precise positioning infrastructure for land transportation -- Part 1: General information and use case definitions

ISO 22212:2019

Traditional Chinese medicine -- Gastrodia elata tuber

ISO 2992:1974

Ammonium sulphate for industrial use -- Determination of iron content -- 2,2'- Bipyridyl photometric method

ISO/TS 13399-203:2015

Cutting tool data representation and exchange -- Part 203: Creation and exchange of 3D models -- Replaceable inserts for drilling

ISO 2993:1974

Ammonium sulphate for industrial use -- Determination of free acidity -- Titrimetric method

ISO 10648-1:1997

Containment enclosures -- Part 1: Design principles

ISO/TS 15638-13:2015

Intelligent transport systems -- Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) -- Part 13: "Mass" information for jurisdictional control and enforcement

ISO 4210-6:2015

Cycles -- Safety requirements for bicycles -- Part 6: Frame and fork test methods

ISO 4210-2:2015

Cycles -- Safety requirements for bicycles -- Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles

ISO 2385:2015

Packed cork -- Virgin cork, raw reproduction cork, ramassage, gleanings, burnt cork, boiled reproduction cork and raw corkwaste -- Sampling to determine moisture content

ISO 21248:2019

Information and documentation -- Quality assessment for national libraries

ISO/IEC 11160-2:2013

Information technology -- Office equipment -- Minimum information to be included in specification sheets -- Printers -- Part 2: Class 3 and Class 4 printers

ISO 15908:2002

Adhesives for thermoplastic piping systems -- Test method for the determination of thermal stability of adhesives

ISO/IEC 15145:1997

Information technology -- Programming languages -- FORTH

ISO 12637-2:2008

Graphic technology -- Vocabulary -- Part 2: Prepress terms

ISO 15614-11:2002

Specification and qualification of welding procedures for metallic materials -- Welding procedure test -- Part 11: Electron and laser beam welding

ISO 4355:2013

Bases for design of structures -- Determination of snow loads on roofs

ISO 11933-1:1997

Components for containment enclosures -- Part 1: Glove/bag ports, bungs for glove/bag ports, enclosure rings and interchangeable units

ISO 9887:1992

Water quality -- Evaluation of the aerobic biodegradability of organic compounds in an aqueous medium -- Semi-continuous activated sludge method (SCAS)

ISO 8100-2:2019

Lifts for the transport of persons and goods -- Part 2: Design rules, calculations, examinations and tests of lift components

ISO 6796:1981

Polyglycols for industrial use -- Determination of hydroxyl number -- Phthalic anhydride esterification method

ISO/TS 8100-3:2019

Lifts for the transport of persons and goods -- Part 3: Requirements from other Standards (ASME A17.1/CSA B44 and JIS A 4307-1/JIS A 4307-2) not included in ISO 8100-1 or ISO 8100-2

ISO 2710-2:2019

Reciprocating internal combustion engines -- Vocabulary -- Part 2: Terms for engine maintenance

ISO 15172:2005

Road vehicles -- Wheels -- Nut seat strength tests

ISO 5887:1981

Aircraft -- Joints for connecting crew members' regulator masks to oxygen sources

ISO 1081:2013

Belt drives -- V-belts and V-ribbed belts, and corresponding grooved pulleys -- Vocabulary

ISO 16290:2013

Space systems -- Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment

ISO 10245-3:2019

Cranes -- Limiting and indicating devices -- Part 3: Tower cranes

ISO 658:2002

Oilseeds -- Determination of content of impurities

ISO 10075-3:2004

Ergonomic principles related to mental workload -- Part 3: Principles and requirements concerning methods for measuring and assessing mental workload

ISO 6814:2009

Machinery for forestry -- Mobile and self-propelled machinery -- Terms, definitions and classification

ISO/TS 17728:2015

Microbiology of the food chain -- Sampling techniques for microbiological analysis of food and feed samples

ISO 17734-1:2013

Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry -- Part 1: Isocyanates using dibutylamine derivatives

ISO/TS 80004-1:2015

Nanotechnologies -- Vocabulary -- Part 1: Core terms

ISO 6929:2013

Steel products -- Vocabulary

ISO 21300:2019

Traditional Chinese medicine -- Guidelines and specification for Chinese materia medica

ISO/TR 21965:2019

Information and documentation -- Records management in enterprise architecture

ISO 12637-4:2008

Graphic technology -- Vocabulary -- Part 4: Postpress terms

ISO 9927-3:2019

Cranes -- Inspections -- Part 3: Tower cranes

ISO 12637-3:2009

Graphic technology -- Vocabulary -- Part 3: Printing terms

ISO 1793:2005

Cinematography -- Reels for 16 mm motion-picture projectors (up to and including 610 m capacity: 38 cm size) -- Dimensions

ISO 7752-3:2013

Cranes -- Control layout and characteristics -- Part 3: Tower cranes

ISO 25577:2013

Information and documentation -- MarcXchange

ISO 12491:1997

Statistical methods for quality control of building materials and components

ISO/IEC 15444-14:2013

Information technology -- JPEG 2000 image coding system -- Part 14: XML representation and reference

ISO 8224-2:1991

Traveller irrigation machines -- Part 2: Softwall hose and couplings -- Test methods

ISO 9866-1:1991

Textiles -- Effect of dry heat on fabrics under low pressure -- Part 1: Procedure for dry-heat treatment of fabrics

ISO 8892:1987

Oilseed residues -- Determination of total residual hexane

ISO 9866-2:1991

Textiles -- Effect of dry heat on fabrics under low pressure -- Part 2: Determination of dimensional change in fabrics exposed to dry heat

ISO 7305:2019

Milled cereal products -- Determination of fat acidity

ISO 3704:1976

Sulphur for industrial use -- Determination of acidity -- Titrimetric method

ISO 9838:2019

Alpine and touring ski-bindings -- Test soles for ski-binding tests

ISO 8826-2:1994

Technical drawings -- Rolling bearings -- Part 2: Detailed simplified representation

ISO 14851:2019

Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium -- Method by measuring the oxygen demand in a closed respirometer

ISO 8492:2013

Metallic materials -- Tube -- Flattening test

ISO 15609-3:2004

Specification and qualification of welding procedures for metallic materials -- Welding procedure specification -- Part 3: Electron beam welding

ISO 8494:2013

Metallic materials -- Tube -- Flanging test

ISO 8495:2013

Metallic materials -- Tube -- Ring-expanding test

ISO 8496:2013

Metallic materials -- Tube -- Ring tensile test

ISO 15012-2:2008

Health and safety in welding and allied processes -- Requirements, testing and marking of equipment for air filtration -- Part 2: Determination of the minimum air volume flow rate of captor hoods and nozzles

ISO 12468-2:2013

External exposure of roofs to fire -- Part 2: Classification of roofs

ISO 4190-2:2001

Lift (US: Elevator) installation -- Part 2: Class IV lifts

ISO 15142-1:2003

Implants for surgery -- Metal intramedullary nailing systems -- Part 1: Intramedullary nails

ISO 5002:2013

Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities

ISO 15142-3:2003

Implants for surgery -- Metal intramedullary nailing systems -- Part 3: Connection devices and reamer diameter measurements

ISO 15142-2:2003

Implants for surgery -- Metal intramedullary nailing systems -- Part 2: Locking components

ISO 8311:2013

Refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels -- Calibration of membrane tanks and independent prismatic tanks in ships -- Manual and internal electro-optical distance-ranging methods

ISO 10633-1:1995

Oilseed residues -- Determination of glucosinolates content -- Part 1: Method using high-performance liquid chromatography

ISO 9669:1990

Series 1 freight containers -- Interface connections for tank containers

ISO 9912-2:2013

Agricultural irrigation equipment -- Filters for microirrigation -- Part 2: Strainer-type filters and disc filters