ISO 10554:2009

Polyamide fibre ropes — Double braid construction

ISO 10547:2009

Polyester fibre ropes — Double braid construction

ISO 11810:2015

Lasers and laser-related equipment — Test method and classification for the laser resistance of surgical drapes and/or patient protective covers — Primary ignition, penetration, flame spread and secondary ignition

ISO 13775-1:2015

Thermoplastic tubing and hoses for automotive use — Part 1: Non-fuel applications

ISO/HL7 27932:2009

Data Exchange Standards — HL7 Clinical Document Architecture, Release 2

ISO 3882:2003

Metallic and other inorganic coatings — Review of methods of measurement of thickness

ISO 105-S02:1993

Textiles — Tests for colour fastness — Part S02: Colour fastness to vulcanization: Sulfur monochloride

ISO 10054:1998

Internal combustion compression-ignition engines — Measurement apparatus for smoke from engines operating under steady-state conditions — Filter-type smokemeter

ISO 23848-2:2009

Machine tools — Ball splines — Part 2: Dynamic and static load ratings and rating life

ISO 8036:2015

Microscopes — Immersion liquids for light microscopy

ISO 19289:2015

Air quality — Meteorology — Siting classifications for surface observing stations on land

ISO 16408:2015

Dentistry — Oral care products — Oral rinses

ISO 23848-1:2009

Machine tools — Ball splines — Part 1: General characteristics and requirements

ISO 369:2009

Machine tools — Symbols for indications appearing on machine tools

ISO/TS 17764-2:2002

Animal feeding stuffs — Determination of the content of fatty acids — Part 2: Gas chromatographic method

ISO/TS 17764-1:2002

Animal feeding stuffs — Determination of the content of fatty acids — Part 1: Preparation of methyl esters

ISO 10050:2005

Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specifications of triaryl phosphate ester turbine control fluids (category ISO-L-TCD)

ISO 4606:1995

Textile glass — Woven fabric — Determination of tensile breaking force and elongation at break by the strip method

ISO 8600-1:2015

Endoscopes — Medical endoscopes and endotherapy devices — Part 1: General requirements

ISO 10318-1:2015

Geosynthetics — Part 1: Terms and definitions

ISO 10318-2:2015

Geosynthetics — Part 2: Symbols and pictograms

ISO/TS 13399-310:2017

Cutting tool data representation and exchange — Part 310: Creation and exchange of 3D models — Turning tools with carbide tips

ISO 11670:2003

Lasers and laser-related equipment — Test methods for laser beam parameters — Beam positional stability

ISO/IEC 27043:2015

Information technology — Security techniques — Incident investigation principles and processes

ISO 3343:2010

Reinforcement yarns — Determination of twist balance index

ISO 2558:2010

Textile glass chopped-strand mats for reinforcement of plastics — Determination of time of dissolution of the binder in styrene

ISO 3582:2000

Flexible cellular polymeric materials — Laboratory assessment of horizontal burning characteristics of small specimens subjected to a small flame

ISO 22915-12:2015

Industrial trucks — Verification of stability — Part 12: Industrial variable-reach trucks handling freight containers of 6 m (20 ft) length and longer

ISO 11359-1:2014

Plastics — Thermomechanical analysis (TMA) — Part 1: General principles

ISO 6983-1:2009

Automation systems and integration — Numerical control of machines — Program format and definitions of address words — Part 1: Data format for positioning, line motion and contouring control systems

ISO 10469:2006

Copper sulfide concentrates — Determination of copper — Electrogravimetric method

ISO/TS 18226:2006

Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar)

ISO 2531:2009

Ductile iron pipes, fittings, accessories and their joints for water applications

ISO 11158:2009

Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG

ISO 8068:2006

Lubricants, industrial oils and related products (class L) — Family T (Turbines) — Specification for lubricating oils for turbines

ISO 5080:1994

Sisal agricultural twines

ISO 15016:2015

Ships and marine technology — Guidelines for the assessment of speed and power performance by analysis of speed trial data

ISO 16122-4:2015

Agricultural and forestry machines — Inspection of sprayers in use — Part 4: Fixed and semi-mobile sprayers

ISO 1167-1:2006

Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 1: General method

ISO 105-A02:1993

Textiles — Tests for colour fastness — Part A02: Grey scale for assessing change in colour

ISO 15367-2:2005

Lasers and laser-related equipment — Test methods for determination of the shape of a laser beam wavefront — Part 2: Shack-Hartmann sensors

ISO 2039-2:1987

Plastics — Determination of hardness — Part 2: Rockwell hardness

ISO/TS 21396:2017

Rubber — Determination of mass concentration of tire and road wear particles (TRWP) in soil and sediments — Pyrolysis-GC/MS method

ISO 9073-14:2006

Textiles — Test methods for nonwovens — Part 14: Coverstock wetback

ISO 11644:2009

Leather — Test for adhesion of finish

ISO 11084-2:2006

Graphic technology — Register systems for photographic materials, foils and paper — Part 2: Register pin systems for plate making

ISO 7231:2010

Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop

ISO 17901-2:2015

Optics and photonics — Holography — Part 2: Methods for measurement of hologram recording characteristics

ISO 9073-13:2006

Textiles — Test methods for nonwovens — Part 13: Repeated liquid strike-through time

ISO 17901-1:2015

Optics and photonics — Holography — Part 1: Methods of measuring diffraction efficiency and associated optical characteristics of holograms

ISO/TS 12812-2:2017

Core banking — Mobile financial services — Part 2: Security and data protection for mobile financial services

ISO/TS 12812-4:2017

Core banking — Mobile financial services — Part 4: Mobile payments-to-persons

ISO/TS 12812-3:2017

Core banking — Mobile financial services — Part 3: Financial application lifecycle management

ISO 7902-2:2020

Hydrodynamic plain journal bearings under steady-state conditions — Circular cylindrical bearings — Part 2: Functions used in the calculation procedure

ISO 25745-3:2015

Energy performance of lifts, escalators and moving walks — Part 3: Energy calculation and classification of escalators and moving walks

ISO 4651:1988

Cellular rubbers and plastics — Determination of dynamic cushioning performance

ISO 24156-1:2014

Graphic notations for concept modelling in terminology work and its relationship with UML — Part 1: Guidelines for using UML notation in terminology work

ISO 10821:2005

Industrial sewing machines — Safety requirements for sewing machines, units and systems

ISO 21172-1:2015

Gas cylinders — Welded steel pressure drums up to 3 000 litres capacity for the transport of gases — Design and construction — Part 1: Capacities up to 1 000 litres

ISO 5772:2015

Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems — Specification

ISO/TS 12812-5:2017

Core banking — Mobile financial services — Part 5: Mobile payments to businesses

ISO 10398:1998

Rubber — Identification of accelerators in cured and uncured compounds

ISO 9022-20:2015

Optics and photonics — Environmental test methods — Part 20: Humid atmosphere containing sulfur dioxide or hydrogen sulfide

ISO 179-1:2010

Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test

ISO 12858-3:2005

Optics and optical instruments — Ancillary devices for geodetic instruments — Part 3: Tribrachs

ISO 11614:1999

Reciprocating internal combustion compression-ignition engines — Apparatus for measurement of the opacity and for determination of the light absorption coefficient of exhaust gas

ISO 11752:2000

Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts

ISO 3202:1997

Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, threaded to head, MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions

ISO 23900-6:2015

Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 6: Determination by film test

ISO 3601-5:2015

Fluid power systems — O-rings — Part 5: Specification of elastomeric materials for industrial applications

ISO 14524:2009

Photography — Electronic still-picture cameras — Methods for measuring opto-electronic conversion functions (OECFs)

ISO 3731:2003

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 24 S (supplementary) for vehicles with 24 V nominal supply voltage

ISO 28921-2:2015

Industrial valves — Isolating valves for low-temperature applications — Part 2: Type testing

ISO 3732:2003

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 12 S (supplementary) for vehicles with 12 V nominal supply voltage

ISO 23900-1:2015

Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 1: General introduction

ISO 5809:1982

Starches and derived products — Determination of sulphated ash

ISO 1185:2003

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 24 N (normal) for vehicles with 24 V nominal supply voltage

ISO 23900-2:2015

Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll milling

ISO 6446:1994

Rubber products — Bridge bearings — Specification for rubber materials

ISO 1724:2003

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — 7-pole connector type 12 N (normal) for vehicles with 12 V nominal supply voltage

ISO 17292:2015

Metal ball valves for petroleum, petrochemical and allied industries

ISO 23900-3:2015

Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in polyethylene by two-roll milling

ISO 23900-4:2015

Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling

ISO 5810:1982

Starches and derived products — Determination of chloride content — Potentiometric method

ISO 23900-5:2015

Pigments and extenders — Methods of dispersion and assessment of dispersibility in plastics — Part 5: Determination by filter pressure value test

ISO 14884:2015

Large yachts — Weathertight doors — Strength and weathertightness requirements

ISO 1985:2015

Machine tools — Test conditions for surface grinding machines with vertical grinding wheel spindle and reciprocating table — Testing of the accuracy

ISO 17469-1:2015

Document management — Strategy markup language (StratML) — Part 1: StratML core elements

ISO 9116:2004

Green coffee — Guidelines on methods of specification

ISO 21413:2005

Manual methods for the measurement of a groundwater level in a well

ISO/IEC 10373-2:2015

Identification cards — Test methods — Part 2: Cards with magnetic stripes

ISO 12642-2:2006

Graphic technology — Input data for characterization of 4-colour process printing — Part 2: Expanded data set

ISO/TS 13399-50:2013

Cutting tool data representation and exchange — Part 50: Reference dictionary for reference systems and common concepts

ISO 12258:1998

Aerospace — Bolts, reduced bihexagonal head, normal or pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 275 MPa — Dimensions

ISO 16694:2015

Space systems — The measured parameters at firing bench and flight tests of liquid rocket engines

ISO 14999-4:2015

Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110

ISO 105-C10:2006

Textiles — Tests for colour fastness — Part C10: Colour fastness to washing with soap or soap and soda

ISO 9136-2:1999

Abrasive grains — Determination of bulk density — Part 2: Microgrits

ISO 10110-5:2015

Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances

ISO 4091:2003

Road vehicles — Connectors for the electrical connection of towing and towed vehicles — Definitions, tests and requirements

ISO 19439:2006

Enterprise integration — Framework for enterprise modelling

ISO 5527:2015

Cereals — Vocabulary

ISO 11414:2009

Plastics pipes and fittings — Preparation of polyethylene (PE) pipe/pipe or pipe/fitting test piece assemblies by butt fusion

ISO 13967:2009

Thermoplastics fittings — Determination of ring stiffness

ISO 289-1:2015

Rubber, unvulcanized — Determinations using a shearing-disc viscometer — Part 1: Determination of Mooney viscosity

ISO 11727:1999

Pneumatic fluid power — Identification of ports and control mechanisms of control valves and other components

ISO 13002:1998

Carbon fibre — Designation system for filament yarns

ISO 12162:2009

Thermoplastics materials for pipes and fittings for pressure applications — Classification, designation and design coefficient

ISO 11151-1:2015

Lasers and laser-related equipment — Standard optical components — Part 1: Components for the UV, visible and near-infrared spectral ranges

ISO 1230:2007

Photography — Determination of flash guide numbers for electronic flash equipment

ISO 11151-2:2015

Lasers and laser-related equipment — Standard optical components — Part 2: Components for the infrared spectral range

ISO/IEC 18000-7:2014

Information technology — Radio frequency identification for item management — Part 7: Parameters for active air interface communications at 433 MHz

ISO 15367-1:2003

Lasers and laser-related equipment — Test methods for determination of the shape of a laser beam wavefront — Part 1: Terminology and fundamental aspects

ISO 17500:2006

Aluminium oxide used for the production of primary aluminium — Determination of attrition index

ISO 4645:1984

Rubber and rubber products — Guide to the identification of antidegradants — Thin layer chromatographic methods

ISO 10319:2015

Geosynthetics — Wide-width tensile test

ISO 12417-1:2015

Cardiovascular implants and extracorporeal systems — Vascular device-drug combination products — Part 1: General requirements

ISO 6953-1:2015

Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 1: Main characteristics to be included in literature from suppliers and product-marking requirements

ISO 13584-31:1999

Industrial automation systems and integration — Parts library — Part 31: Implementation resources: Geometric programming interface

ISO 4997:2015

Cold-reduced carbon steel sheet of structural quality

ISO/ASTM 51707:2015

Guide for estimation of measurement uncertainty in dosimetry for radiation processing

ISO 7588-3:1998

Road vehicles — Electrical/electronic switching devices — Part 3: Microrelays

ISO 13291:2006

Zinc sulfide concentrates — Determination of zinc — Solvent extraction and EDTA titrimetric method

ISO 28927-6:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 6: Rammers

ISO 28927-5:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 5: Drills and impact drills

ISO 28927-7:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 7: Nibblers and shears

ISO 14880-3:2006

Optics and photonics — Microlens arrays — Part 3: Test methods for optical properties other than wavefront aberrations

ISO 14880-4:2006

Optics and photonics — Microlens arrays — Part 4: Test methods for geometrical properties

ISO 14243-1:2009

Implants for surgery — Wear of total knee-joint prostheses — Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test

ISO 5085-1:1989

Textiles — Determination of thermal resistance — Part 1: Low thermal resistance

ISO/IEC 18004:2015

Information technology — Automatic identification and data capture techniques — QR Code bar code symbology specification

ISO 28079:2009

Hardmetals — Palmqvist toughness test

ISO 6533:2020

Forestry machinery — Portable chain-saw front hand-guard — Dimensions and clearances

ISO 3785:2006

Metallic materials — Designation of test specimen axes in relation to product texture

ISO/TS 21108:2005

Hand-held power tools — Impulse wrenches — Dimensions and tolerances of interface to power socket

ISO 7588-1:1998

Road vehicles — Electrical/electronic switching devices — Part 1: Relays and flashers

ISO 28927-9:2009

Hand-held portable power tools — Test methods for evaluation of vibration emission — Part 9: Scaling hammers and needle scalers

ISO 16012:2015

Plastics — Determination of linear dimensions of test specimens

ISO 16872:2015

Round steel short link chains for lifting purposes — Fine tolerance hoist chains for hand operated chain hoists — Grade VH

ISO 8053:1995

Rubber and latex — Determination of copper content — Photometric method

ISO 3213:2009

Polypropylene (PP) pipes — Effect of time and temperature on the expected strength

ISO/IEC 23008-11:2015

Information technology — High efficiency coding and media delivery in heterogeneous environments — Part 11: MPEG media transport composition information

ISO 20200:2015

Plastics — Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test

ISO 13556:1998

Road vehicles — Localization of exhaust system leaks and equipment specifications

ISO 19262:2015

Photography — Archiving Systems — Vocabulary

ISO/IEC 15938-6:2020

Information technology — Multimedia content description interface — Part 6: Reference software

ISO 13779-6:2015

Implants for surgery — Hydroxyapatite — Part 6: Powders

ISO 105-J03:2009

Textiles — Tests for colour fastness — Part J03: Calculation of colour differences

ISO 1754:2010

Photography — Cameras using 35 mm film and roll film — Dimensions of picture sizes

ISO 4149:2005

Green coffee — Olfactory and visual examination and determination of foreign matter and defects

ISO 14880-2:2006

Optics and photonics — Microlens arrays — Part 2: Test methods for wavefront aberrations

ISO 18901:2010

Imaging materials — Processed silver-gelatin-type black-and-white films — Specifications for stability

ISO 4638:1984

Polymeric materials, cellular flexible — Determination of air flow permeability

ISO 16877:2015

Round steel short link chains for lifting purposes — Fine tolerance hoist chains for hand operated chain hoists — Grade TH

ISO/TS 13399-100:2008

Cutting tool data representation and exchange — Part 100: Definitions, principles and methods for reference dictionaries

ISO 22007-2:2015

Plastics — Determination of thermal conductivity and thermal diffusivity — Part 2: Transient plane heat source (hot disc) method

ISO 2738:1999

Sintered metal materials, excluding hardmetals — Permeable sintered metal materials — Determination of density, oil content and open porosity

ISO 15100:2000

Plastics — Reinforcement fibres — Chopped strands — Determination of bulk density

ISO 3086:2006

Iron ores — Experimental methods for checking the bias of sampling

ISO 16122-1:2015

Agricultural and forestry machinery — Inspection of sprayers in use — Part 1: General

ISO 4107:2010

Commercial vehicles — Wheel-hub attachment dimensions

ISO/IEC 15459-2:2015

Information technology — Automatic identification and data capture techniques — Unique identification — Part 2: Registration procedures