ISO 897:2000

Photography — Roll films, 126, 110 and 135-size films — Identification of the image-bearing side

ISO 6851:2001

Photography — Processing waste — Determination of total amino nitrogen (microdiffusion Kjeldahl method)

ISO 4074:2015

Natural rubber latex male condoms — Requirements and test methods

ISO 19334:2010

Binders for paints and varnishes — Gum rosin — Gas-chromatographic analysis

ISO 12188-1:2010

Tractors and machinery for agriculture and forestry — Test procedures for positioning and guidance systems in agriculture — Part 1: Dynamic testing of satellite-based positioning devices

ISO 30003:2009

Ships and marine technology — Ship recycling management systems — Requirements for bodies providing audit and certification of ship recycling management

ISO 8511:2011

Rubber compounding ingredients — Carbon black — Determination of pellet size distribution

ISO 7914:2002

Forestry machinery — Portable chain-saws — Minimum handle clearance and sizes

ISO 20905:2004

Coal preparation — Determination of dust/moisture relationship for coal

ISO 8858-3:2004

Hard coal — Froth flotation testing — Part 3: Release evaluation

ISO 6853:2001

Photography — Processing waste — Determination of ammoniacal nitrogen (microdiffusion method)

ISO 8858-2:2004

Hard coal — Froth flotation testing — Part 2: Sequential evaluation

ISO 7760:2001

Photography — Processing waste — Determination of hydroquinone

ISO 10510:2011

Tapping screw and washer assemblies with plain washers

ISO 18934:2011

Imaging materials — Multiple media archives — Storage environment

ISO 8362-5:2016

Injection containers and accessories — Part 5: Freeze drying closures for injection vials

ISO/TS 17165-2:2018

Hydraulic fluid power — Hose assemblies — Part 2: Practices for hydraulic hose assemblies

ISO 27500:2016

The human-centred organization — Rationale and general principles

ISO 22196:2011

Measurement of antibacterial activity on plastics and other non-porous surfaces

ISO/TS 11366:2011

Petroleum and related products — Guidance for in-servicing of lubricating oils for steam, gas and combined-cycle turbines

ISO 12273:2010

Aerospace — Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees C — Dimensions

ISO/IEC 30107-1:2016

Information technology — Biometric presentation attack detection — Part 1: Framework

ISO 29541:2010

Solid mineral fuels — Determination of total carbon, hydrogen and nitrogen content — Instrumental method

ISO 7388-3:2016

Tool shanks with 7/24 taper for automatic tool changers — Part 3: Retention knobs of forms AD, AF, UD, UF, JD and JF

ISO/IEC 15416:2016

Automatic identification and data capture techniques — Bar code print quality test specification — Linear symbols

ISO 21561-2:2016

Styrene-butadiene rubber (SBR) — Determination of the microstructure of solution-polymerized SBR — Part 2: FTIR with ATR method

ISO 14460:1999

Protective clothing for automobile racing drivers — Protection against heat and flame — Performance requirements and test methods

ISO 14589:2000

Blind rivets — Mechanical testing

ISO 14588:2000

Blind rivets — Terminology and definitions

ISO 9454-1:2016

Soft soldering fluxes — Classification and requirements — Part 1: Classification, labelling and packaging

ISO 6072:2011

Rubber — Compatibility between hydraulic fluids and standard elastomeric materials

ISO 5349-1:2001

Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 1: General requirements

ISO 16894:2009

Wood-based panels — Oriented strand board (OSB) — Definitions, classification and specifications

ISO 8605:2001

Textile-glass-reinforced plastics — Sheet moulding compound (SMC) — Basis for a specification

ISO/TR 10064-4:1998

Code of inspection practice — Part 4: Recommendations relative to surface texture and tooth contact pattern checking

ISO 19246:2016

Rubber compounding ingredients — Silica — Oil absorption of precipitated silica

ISO 19281:2016

Air cargo — Fire resistant containers — Design, performance and testing requirements

ISO 2286-1:2016

Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 1: Methods for determination of length, width and net mass

ISO 1421:2016

Rubber- or plastics-coated fabrics — Determination of tensile strength and elongation at break

ISO 9609:2016

Aerospace — Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C, 900 MPa (at ambient temperature) /235 degrees C, 900 MPa (at ambient temperature) /315 degrees C, 900 MPa (at ambient temperature) /650 degrees C, 1 100 MPa (at ambient temperature) /235 degrees C, 1 100 MPa (at ambient temperature) /730 degrees C and 1 250 MPa (at ambient temperature)/600 degrees C — Dimensions

ISO 2589:2016

Leather — Physical and mechanical tests — Determination of thickness

ISO 9618:2016

Aerospace — Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425 degrees C, 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C, 900 MPa (at ambient temperature)/650 degrees C, 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/730 degrees C and 1 250 MPa (at ambient temperature)/600 degrees C — Dimensions

ISO 2417:2016

Leather — Physical and mechanical tests — Determination of the static absorption of water

ISO/TS 12913-2:2018

Acoustics — Soundscape — Part 2: Data collection and reporting requirements

ISO/TR 10064-3:1996

Code of inspection practice — Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes

ISO 4046-1:2016

Paper, board, pulps and related terms — Vocabulary — Part 1: Alphabetical index

ISO 3616:2001

Textile glass — Chopped-strand and continuous-filament mats — Determination of average thickness, thickness under load and recovery after compression

ISO 3592:2000

Industrial automation systems — Numerical control of machines — NC processor output — File structure and language format

ISO 17714:2007

Meteorology — Air temperature measurements — Test methods for comparing the performance of thermometer shields/screens and defining important characteristics

ISO 8394-1:2010

Building construction — Jointing products — Part 1: Determination of extrudability of sealants

ISO 17713-1:2007

Meteorology — Wind measurements — Part 1: Wind tunnel test methods for rotating anemometer performance

ISO 11953:2010

Dentistry — Implants — Clinical performance of hand torque instruments

ISO 22742:2010

Packaging — Linear bar code and two-dimensional symbols for product packaging

ISO 11901-1:2003

Tools for pressing — Gas springs — Part 1: General specifications

ISO 30012:2016

Carbon-fibre-reinforced plastics — Determination of the size and aspect ratio of crushed objects

ISO 15853:1999

Thermoplastics materials — Preparation of tubular test pieces for the determination of the hydrostatic strength of materials used for injection moulding

ISO 4046-2:2016

Paper, board, pulps and related terms — Vocabulary — Part 2: Pulping terminology

ISO 17236:2016

Leather — Physical and mechanical tests — Determination of extension set

ISO 12260:2016

Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, stepped shank, short or medium length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions

ISO 17229:2016

Leather — Physical and mechanical tests — Determination of water vapour absorption

ISO 12261:2016

Aerospace — Screws, pan head, internal offset cruciform ribbed or unribbed drive, pitch diameter shank, long length MJ threads, metallic material, coated or uncoated, strength classes less than or equal to 1 100 MPa — Dimensions

ISO 15089:2000

Water quality — Guidelines for selective immunoassays for the determination of plant treatment and pesticide agents

ISO 3377-2:2016

Leather — Physical and mechanical tests — Determination of tear load — Part 2: Double edge tear

ISO 10959:2016

Aerospace — MJ threads — Gauging

ISO 10889-3:2016

Tool holders with cylindrical shank — Part 3: Type B with rectangular radial seat

ISO 4046-5:2016

Paper, board, pulps and related terms — Vocabulary — Part 5: Properties of pulp, paper and board

ISO 10889-2:2016

Tool holders with cylindrical shank — Part 2: Type A, shanks for tool holders of special designs

ISO 4046-4:2016

Paper, board, pulps and related terms — Vocabulary — Part 4: Paper and board grades and converted products

ISO 12289:2016

Aerospace — Rivets, solid, in corrosion-resisting steel — Procurement specification

ISO/IEC 20648:2016

Information technology — TLS specification for storage systems

ISO 4046-3:2016

Paper, board, pulps and related terms — Vocabulary — Part 3: Paper-making terminology

ISO 10889-6:2016

Tool holders with cylindrical shank — Part 6: Type E with cylindrical seat

ISO 10889-4:2016

Tool holders with cylindrical shank — Part 4: Type C with rectangular axial seat

ISO 10326-1:2016

Mechanical vibration — Laboratory method for evaluating vehicle seat vibration — Part 1: Basic requirements

ISO 14546:2000

Photography — Aerial films and spools — Dimensions

ISO 12234-3:2016

Electronic still picture imaging — Removable memory — Part 3: XMP for digital photography

ISO 6224:2011

Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification

ISO 14296:2016

Intelligent transport systems — Extension of map database specifications for applications of cooperative ITS

ISO 16763:2016

Graphic technology — Post-press — Requirements for bound products

ISO 2286-2:2016

Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 2: Methods for determination of total mass per unit area, mass per unit area of coating and mass per unit area of substrate

ISO 4674-1:2016

Rubber- or plastics-coated fabrics — Determination of tear resistance — Part 1: Constant rate of tear methods

ISO 2286-3:2016

Rubber- or plastics-coated fabrics — Determination of roll characteristics — Part 3: Method for determination of thickness

ISO 5990:2000

Photography — Processing chemicals — Specifications for potassium sulfite, 650 g/l solution

ISO 21940-12:2016

Mechanical vibration — Rotor balancing — Part 12: Procedures and tolerances for rotors with flexible behaviour

ISO/IEC TS 17021-9:2016

Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 9: Competence requirements for auditing and certification of anti-bribery management systems

ISO 177:2016

Plastics — Determination of migration of plasticizers

ISO 6624-4:2016

Internal combustion engines — Piston rings — Part 4: Half keystone rings made of steel

ISO 3877-2:1997

Tyres, valves and tubes — List of equivalent terms — Part 2: Tyre valves

ISO 6624-2:2016

Internal combustion engines — Piston rings — Part 2: Half keystone rings made of cast iron

ISO 3877-1:1997

Tyres, valves and tubes — List of equivalent terms — Part 1: Tyres

ISO/TS 18234-3:2013

Intelligent transport systems — Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format — Part 3: Service and network information (TPEG1-SNI)

ISO/IEC TS 17021-6:2014

Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 6: Competence requirements for auditing and certification of business continuity management systems

ISO 15024:2001

Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials

ISO 123:2001

Rubber latex — Sampling

ISO 9241-161:2016

Ergonomics of human-system interaction — Part 161: Guidance on visual user-interface elements

ISO 12029:2010

Document management — Machine-readable paper forms — Optimal design for user friendliness and electronic document management systems (EDMS)

ISO 12573:2010

Aircraft — Tubing tolerances — Inch series

ISO 13860:2016

Machinery for forestry — Forwarders — Terms, definitions and commercial specifications

ISO 19070:2016

Leather — Chemical determination of N-methyl-2-pyrrolidone (NMP) in leather

ISO 4900:2011

Textile glass — Mats and fabrics — Determination of contact mouldability

ISO 249:2016

Rubber, raw natural — Determination of dirt content

ISO 418:2001

Photography — Processing chemicals — Specifications for anhydrous sodium sulfite

ISO 19071:2016

Leather — Chemical tests — Determination of chromium (VI) and the reductive potential for chromium tanning agents

ISO/IEC 15411:1999

Information technology — Segmented keyboard layouts

ISO/IEC 15412:1999

Information technology — Portable computer keyboard layouts

ISO 12707:2016

Non-destructive testing — Magnetic particle testing — Vocabulary

ISO 2559:2011

Textile glass — Mats (made from chopped or continuous strands) — Designation and basis for specifications

ISO/TS 21619:2018

Geometrical product specifications (GPS) — Types of documents with GPS

ISO 4604:2011

Reinforcement fabrics — Determination of conventional flexural stiffness — Fixed-angle flexometer method

ISO 13299:2016

Sensory analysis — Methodology — General guidance for establishing a sensory profile

ISO 3342:2011

Textile glass — Mats — Determination of tensile breaking force

ISO 12690:2010

Metallic and other inorganic coatings — Thermal spray coordination — Tasks and responsibilities

ISO/IEC 11581-6:1999

Information technology — User system interfaces and symbols — Icon symbols and functions — Part 6: Action icons

ISO 15178:2000

Soil quality — Determination of total sulfur by dry combustion

ISO 3627:2001

Photography — Processing chemicals — Specifications for anhydrous sodium metabisulfite

ISO 3629:2000

Photography — Processing chemicals — Specifications for potassium metabisulfite

ISO 2113:1996

Reinforcement fibres — Woven fabrics — Basis for a specification

ISO 1183-3:1999

Plastics — Methods for determining the density of non-cellular plastics — Part 3: Gas pyknometer method

ISO/TS 20612:2007

Water quality — Interlaboratory comparisons for proficiency testing of analytical chemistry laboratories

ISO 10640:2011

Plastics — Methodology for assessing polymer photoageing by FTIR and UV/visible spectroscopy

ISO 4918:2016

Resilient, textile and laminate floor coverings — Castor chair test

ISO 15721:2001

Metallic coatings — Porosity tests — Porosity in gold or palladium coatings by sulfurous acid/sulfur dioxide vapour

ISO 15682:2000

Water quality — Determination of chloride by flow analysis (CFA and FIA) and photometric or potentiometric detection

ISO 7094:2000

Plain washers — Extra large series — Product grade C

ISO 3225:1998

Aerospace — Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

ISO/TS 22687:2018

Rubber — Framework for assessing the environmental fate of tyre and road wear particles (TRWP)

ISO/TS 17182:2014

Soil quality — Determination of some selected phenols and chlorophenols — Gas chromatographic method with mass spectrometric detection

ISO/TS 16550:2014

Nanotechnologies — Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus

ISO 3224:1998

Aerospace — Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425 degrees C — Dimensions

ISO 291:2008

Plastics — Standard atmospheres for conditioning and testing

ISO 15720:2001

Metallic coatings — Porosity tests — Porosity in gold or palladium coatings on metal substrates by gel-bulk electrography

ISO 10619-3:2011

Rubber and plastics hoses and tubing — Measurement of flexibility and stiffness — Part 3: Bending tests at high and low temperatures

ISO 11970:2016

Specification and qualification of welding procedures for production welding of steel castings

ISO 1268-1:2001

Fibre-reinforced plastics — Methods of producing test plates — Part 1: General conditions

ISO 16072:2002

Soil quality — Laboratory methods for determination of microbial soil respiration

ISO 16468:2015

Investment castings (steel, nickel alloys and cobalt alloys) — General technical requirements

ISO 11949:2016

Cold-reduced tinmill products — Electrolytic tinplate

ISO 5349-2:2001

Mechanical vibration — Measurement and evaluation of human exposure to hand-transmitted vibration — Part 2: Practical guidance for measurement at the workplace

ISO 13521:2015

Austenitic manganese steel castings

ISO 13520:2015

Determination of ferrite content in austenitic stainless steel castings

ISO 17546:2016

Space systems — Lithium ion battery for space vehicles — Design and verification requirements

ISO 11951:2016

Cold-reduced tinmill products — Blackplate

ISO 12609-2:2013

Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications — Part 2: Guidance for use

ISO 11950:2016

Cold-reduced tinmill products — Electrolytic chromium/chromium oxide-coated steel

ISO 13165-3:2016

Water quality — Radium-226 — Part 3: Test method using coprecipitation and gamma-spectrometry

ISO 1407:2011

Rubber — Determination of solvent extract

ISO 7176-9:2009

Wheelchairs — Part 9: Climatic tests for electric wheelchairs

ISO 10869:2010

Oil of fir needle, Siberian (Abies sibirica Ledeb.)

ISO 7827:2010

Water quality — Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium — Method by analysis of dissolved organic carbon (DOC)

ISO 4576:1996

Plastics — Polymer dispersions — Determination of sieve residue (gross particle and coagulum content)

ISO 4628-1:2016

Paints and varnishes — Evaluation of degradation of coatings — Designation of quantity and size of defects, and of intensity of uniform changes in appearance — Part 1: General introduction and designation system

ISO 12460-4:2016

Wood-based panels — Determination of formaldehyde release — Part 4: Desiccator method

ISO 8529-2:2000

Reference neutron radiations — Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field

ISO 9377-2:2000

Water quality — Determination of hydrocarbon oil index — Part 2: Method using solvent extraction and gas chromatography

ISO 1043-1:2011

Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics

ISO 11339:2010

Adhesives — T-peel test for flexible-to-flexible bonded assemblies

ISO 18055-1:2004

Photography and imaging — Inkjet media: Classification, nomenclature and dimensions — Part 1: Photo-grade media (paper and film)

ISO 8066-2:2001

Rubber and plastics hoses and hose assemblies for automotive air conditioning — Specification — Part 2: Refrigerant 134a

ISO 11337:2010

Plastics — Polyamides — Determination of e-caprolactam and w-laurolactam by gas chromatography

ISO 17564:2008

Raw hydrogenated nitrile rubber (HNBR) — Determination of residual unsaturation by iodine value