Text Number

Standard Title

ISO 18082:2014

Anaesthetic and respiratory equipment -- Dimensions of non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases.

ISO 2759:2014  - Replace: ISO 2759:2001

Board -- Determination of bursting strength.

ISO 10916:2014

Calculation of the impact of daylight utilization on the net and final energy demand for lighting.

ISO 13099-3:2014

Colloidal systems -- Methods for zeta potential determination -- Part 3: Acoustic methods.

ISO 4998:2014 - Replace: ISO 4998:2011

Continuous hot-dip zinc-coated and zinc-iron alloy-coated carbon steel sheet of structural quality.

ISO 20752:2014  - Replace: ISO 20752:2007

Cork stoppers -- Determination of releasable 2, 4, 6-trichloroanisol (TCA).

ISO 8098:2014 -Replace: ISO 8098:2002

Cycles -- Safety requirements for bicycles for young children.

ISO 10683:2014  - Replace: ISO 10683:2000

Fasteners -- Non-electrolytically applied zinc flake coatings.

ISO 17142:2014

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure -- Determination of fatigue properties at constant amplitude.

ISO 17139:2014

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Thermophysical properties of ceramic composites -- Determination of thermal expansion.

ISO 14246:2014

Gas cylinders -- Cylinder valves -- Manufacturing tests and examinations.

ISO/TS 17938:2014

Health informatics -- Semantic network framework of traditional Chinese medicine language system.

ISO/IEC 24727-1:2014 - Replace: ISO/IEC 24727-1:2007

Identification cards -- Integrated circuit card programming interfaces -- Part 1: Architecture.

ISO 23317:2014 - Replace: ISO 23317:2012

Implants for surgery -- In vitro evaluation for apatite-forming ability of implant materials.

ISO 22915-3:2014  - Replace: ISO 22915-3:2008

Industrial trucks -- Verification of stability -- Part 3: Reach and straddle trucks.

 ISO/IEC 17629:2014

Information technology -- Office equipment -- Method for measuring first print out time for digital printing devices.

ISO/IEC 17811-1:2014

Information technology -- Device control and management -- Part 1: Architecture.

ISO/IEC TR 30112:2014

Information technology -- Specification methods for cultural conventions.

ISO/TS 17758:2014 (IDF 87)

Instant dried milk -- Determination of the dispersibility and wettability.

ISO 17984:2014- Replace: ISO/PAS 17984:2001

Machine-made textile floor coverings -- Determination of dimensional changes after exposure to heat and/or water.

IEC/TR 80002-3:2014

Medical device software -- Part 3: Process reference model of medical device software life cycle processes (IEC 62304).

ISO 17081:2014  - Replace: ISO 17081:2004

Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique.

ISO 14532:2014  - Replace: ISO 14532:2001; ISO 14532:2001/Cor 1:2002

Natural gas – Vocabulary.

ISO 12715:2014  - Replace: ISO 12715:1999

Non-destructive testing -- Ultrasonic testing -- Reference blocks and test procedures for the characterization of contact probe sound beams.

ISO 15366-1:2014  - Replace: ISO 15366:1999

Nuclear fuel technology -- Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography -- Part 1: Samples containing plutonium in the microgram range and uranium in the milligram range.

ISO 15366-2:2014  - Replace: ISO 15366:1999

Nuclear fuel technology -- Chemical separation and purification of uranium and plutonium in nitric acid solutions for isotopic and isotopic dilution analysis by solvent extraction chromatography -- Part 2: Samples containing plutonium and uranium in the nanogram range and below.

ISO/TR 17606:2014

Plain bearings -- Lubrication characteristics of crosshead pin bearings for low-speed marine diesel engines.

ISO 3548-1:2014 - Replace: ISO 3548:1999

Plain bearings -- Thin-walled half bearings with or without flange -- Part 1: Tolerances, design features and methods of test.

ISO 11357-4:2014 - Replace: ISO 11357-4:2005

Plastics -- Differential scanning calorimetry (DSC) -- Part 4: Determination of specific heat capacity.

ISO 11358-2:2014  - Replace: ISO 11358-2:2005

Plastics -- Thermogravimetry (TG) of polymers -- Part 2: Determination of activation energy.

ISO 11403-1:2014 - Replace: ISO 11403-1:2001

Plastics -- Acquisition and presentation of comparable multipoint data -- Part 1: Mechanical properties.

ISO 11403-3:2014 - Replace: ISO 11403-3:1999

Plastics -- Acquisition and presentation of comparable multipoint data -- Part 3: Environmental influences on properties.

ISO 6808:2014  - Replace: ISO 6808:1999

Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids – Specification.

ISO/TR 17801:2014

Plastics -- Standard table for reference global solar spectral irradiance at sea level -- Horizontal, relative air mass 1.

ISO 15646:2014

Re-sintering test for UO2, (U,Gd)O2 and (U,Pu)O2 pellets.

ISO 12619-1:2014

Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components -- Part 1: General requirements and definitions.

ISO 12619-2:2014

Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components -- Part 2: Performance and general test methods.

ISO 12619-3:2014

Road vehicles -- Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components -- Part 3: Pressure regulator.

ISO 16380:2014

Road vehicles -- Blended fuels refuelling connector.

ISO 19072-1:2014 - Replace: ISO 19072-1:2007

Road vehicles -- Connection interface for pyrotechnic devices, two-way and three-way connections -- Part 1: Pocket interface definition.

ISO 4126-6:2014 - Replace: ISO 4126-6:2003 - ISO 10350-1:2007/Amd 1:2014 Pages: 1

Safety devices for protection against excessive pressure -- Part 6: Application, selection and installation of bursting disc safety devices .

ISO 8589:2007/Amd 1:2014

Sensory analysis - General guidance for the design of test rooms.

ISO 17325-1:2014

Ships and marine technology -- Marine environment protection -- Oil booms -- Part 1: Design requirements.

ISO 9455-5:2014 - Replace: ISO 9455-5:1992

Soft soldering fluxes -- Test methods -- Part 5: Copper mirror test.

ISO 13629-2:2014

Textiles -- Determination of antifungal activity of textile products -- Part 2: Plate count method.

ISO 16373-2:2014

Textiles -- Dyestuffs -- Part 2: General method for the determination of extractable dyestuffs including allergenic and carcinogenic dyestuffs (method using pyridine-water).

ISO 16373-3:2014

Textiles -- Dyestuffs -- Part 3: Method for determination of certain carcinogenic dyestuffs (method using triethylamine/methanol).

ISO 3493:2014  - Replace: ISO 3493:1999

Vanilla – Vocabulary.