ISO/IEC 23006-5:2013

Information technology -- Multimedia service platform technologies -- Part 5: Service aggregation

ISO 15587-1:2002

Water quality -- Digestion for the determination of selected elements in water -- Part 1: Aqua regia digestion

ISO 5456-3:1996

Technical drawings -- Projection methods -- Part 3: Axonometric representations

ISO 9657:2004

Pliers and nippers for electronics -- General technical requirements

ISO 6384:1981

Surface active agents -- Technical ethoxylated fatty amines -- Methods of analysis

ISO 92:1976

Textile machinery and accessories -- Spinning machinery -- Definition of side (left or right)

ISO 5455:1979

Technical drawings -- Scales

ISO 4795:1996

Glass for thermometer bulbs

ISO 17557:2003

Plastics -- Film and sheeting -- Cast polypropylene (PP) films

ISO 5456-2:1996

Technical drawings -- Projection methods -- Part 2: Orthographic representations

ISO 5456-1:1996

Technical drawings -- Projection methods -- Part 1: Synopsis

ISO 9553:1997

Solar energy -- Methods of testing preformed rubber seals and sealing compounds used in collectors

ISO 3601-4:2008

Fluid power systems -- O-rings -- Part 4: Anti-extrusion rings (back-up rings)

ISO/IEC TS 18661-2:2015

Information Technology -- Programming languages, their environments, and system software interfaces -- Floating-point extensions for C -- Part 2: Decimal floating-point arithmetic

ISO 23273:2013

Fuel cell road vehicles -- Safety specifications -- Protection against hydrogen hazards for vehicles fuelled with compressed hydrogen

ISO 7539-11:2013

Corrosion of metals and alloys -- Stress corrosion testing -- Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking

ISO 23470:2018

Soil quality -- Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt(III)chloride solution

ISO 8115-3:1995

Bales -- Part 3: Bales of cotton -- Packaging and labelling

ISO/TR 10093:2018

Plastics -- Fire tests -- Standard ignition sources

ISO 29990:2010

Learning services for non-formal education and training -- Basic requirements for service providers

ISO 6263:2013

Hydraulic fluid power -- Compensated flow-control valves -- Mounting surfaces

ISO 8124-3:2010/Amd 2:2018

ISO 8976:2004

Pliers and nippers -- Multiple slip joint pliers -- Dimensions and test values

ISO 248-1:2011

Rubber, raw -- Determination of volatile-matter content -- Part 1: Hot-mill method and oven method

ISO 5748:2004

Pliers and nippers -- End cutting nippers -- Dimensions and test values

ISO 5745:2004

Pliers and nippers -- Pliers for gripping and manipulating -- Dimensions and test values

ISO 19014-3:2018

Earth-moving machinery -- Functional safety -- Part 3: Environmental performance and test requirements of electronic and electrical components used in safety-related parts of the control system

ISO 9654:2004

Pliers and nippers for electronics -- Single-purpose nippers -- Cutting nippers

ISO/IEC 29192-4:2013

Information technology -- Security techniques -- Lightweight cryptography -- Part 4: Mechanisms using asymmetric techniques

ISO 9655:2004

Pliers and nippers for electronics -- Single-purpose pliers -- Pliers for gripping and manipulating

ISO 6388:1989

Surface active agents -- Determination of flow properties using a rotational viscometer

ISO 8979:2004

Pliers and nippers for electronics -- Nomenclature

ISO 6387:1983

Surface active agents -- Determination of the power to disperse calcium soap -- Acidimetric method (Modified Schoenfeldt method)

ISO 9343:2004

Pliers and nippers -- Slip joint pliers -- Dimensions and test values

ISO 8063-2:1986

Information processing -- Data interchange on 6,30 mm (0.25 in) wide magnetic tape cartridge using IMFM recording at 252 ftpmm (6 400 ftpi) -- Part 2: Track format and method of recording for data interchange in start/stop mode

ISO 28198:2018

Vegetable fats and oils -- Determination of toluene insoluble matter

ISO/TS 17518:2015

Medical laboratories -- Reagents for staining biological material -- Guidance for users

ISO 18749:2004

Water quality -- Adsorption of substances on activated sludge -- Batch test using specific analytical methods

ISO 6461-2:1986

Water quality -- Detection and enumeration of the spores of sulfite-reducing anaerobes (clostridia) -- Part 2: Method by membrane filtration

ISO/TS 19218-1:2011

Medical devices -- Hierarchical coding structure for adverse events -- Part 1: Event-type codes

ISO 22915-15:2013

Industrial trucks -- Verification of stability -- Part 15: Counterbalanced trucks with articulated steering

ISO 5743:2004

Pliers and nippers -- General technical requirements

ISO 21807:2004

Microbiology of food and animal feeding stuffs -- Determination of water activity

ISO 105-Z03:1996

Textiles -- Tests for colour fastness -- Part Z03: Intercompatibility of basic dyes for acrylic fibres

ISO 21537-2:2004

Clamping flanges for superabrasive cutting-off wheels -- Part 2: Building and construction

ISO 105-Z05:1996

Textiles -- Tests for colour fastness -- Part Z05: Determination of the dusting behaviour of dyes

ISO 21537-1:2004

Clamping flanges for superabrasive cutting-off wheels -- Part 1: Natural stone

ISO 13770:1997

Aluminium alloy gas cylinders -- Operational requirements for avoidance of neck and shoulder cracks

ISO 12460-2:2018

Wood-based panels -- Determination of formaldehyde release -- Part 2: Small-scale chamber method

ISO 11439:2013

Gas cylinders -- High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles

ISO 1922:2018

Rigid cellular plastics -- Determination of shear properties

ISO 10377:2013

Consumer product safety -- Guidelines for suppliers

ISO/TS 19218-2:2012

Medical devices -- Hierarchical coding structure for adverse events -- Part 2: Evaluation codes

ISO 10393:2013

Consumer product recall -- Guidelines for suppliers

ISO 477:1982

Textile machinery and accessories -- Cone and cheese winding machines -- Vocabulary

ISO 3019-2:2001

Hydraulic fluid power -- Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors -- Part 2: Metric series

ISO 13686:2013

Natural gas -- Quality designation

ISO 683-15:1992

Heat-treatable steels, alloy steels and free-cutting steels -- Part 15: Valve steels for internal combustion engines

ISO 6547:1981

Hydraulic fluid power -- Cylinders -- Piston seal housings incorporating bearing rings -- Dimensions and tolerances

ISO 476:1982

Textile machinery and accessories -- Pirn winding machines -- Vocabulary

ISO 105-J02:1997

Textiles -- Tests for colour fastness -- Part J02: Instrumental assessment of relative whiteness

ISO/IEC 15444-11:2007

Information technology -- JPEG 2000 image coding system: Wireless

ISO 17854:2013

Space data and information transfer systems -- Flexible advanced coding and modulation scheme for high rate telemetry applications

ISO 18453:2004

Natural gas -- Correlation between water content and water dew point

ISO 16358-1:2013

Air-cooled air conditioners and air-to-air heat pumps -- Testing and calculating methods for seasonal performance factors -- Part 1: Cooling seasonal performance factor

ISO 16358-2:2013

Air-cooled air conditioners and air-to-air heat pumps -- Testing and calculating methods for seasonal performance factors -- Part 2: Heating seasonal performance factor

ISO/IEC 29173-1:2012

Information technology -- Mobile item identification and management -- Part 1: Mobile RFID interrogator device protocol for ISO/IEC 18000-63 Type C

ISO/TR 16689:2012

Anodizing of aluminium and its alloys -- Experimental research on possible alternative sealing quality test methods to replace the phosphoric acid/chromic acid immersion test -- Evaluation of correlations

ISO 696:1975

Surface active agents -- Measurement of foaming power -- Modified Ross-Miles method

ISO 2162-2:1993

Technical product documentation -- Springs -- Part 2: Presentation of data for cylindrical helical compression springs

ISO/IEC 20000-1:2018

Information technology -- Service management -- Part 1: Service management system requirements

ISO 28004-1:2007

Security management systems for the supply chain -- Guidelines for the implementation of ISO 28000 -- Part 1: General principles

ISO 5414-1:2002

Tool chucks (end mill holders) with clamp screws for flatted cylindrical shank tools -- Part 1: Dimensions of the driving system of tool shanks

ISO/IEC 15444-3:2007

Information technology -- JPEG 2000 image coding system: Motion JPEG 2000

ISO 10374:1991

Freight containers -- Automatic identification

ISO 128-21:1997

Technical drawings -- General principles of presentation -- Part 21: Preparation of lines by CAD systems

ISO 868:2003

Plastics and ebonite -- Determination of indentation hardness by means of a durometer (Shore hardness)

ISO 9589:1994

Escalators -- Building dimensions

ISO/IEC 21000-18:2007

Information technology -- Multimedia framework (MPEG-21) -- Part 18: Digital Item Streaming

ISO 10599-2:1997

Car radios -- Coaxial aerial connectors -- Part 2: Characteristic values, performance requirements and tests

ISO 11843-7:2018

Capability of detection -- Part 7: Methodology based on stochastic properties of instrumental noise

ISO 26622-2:2008

Modular taper interface with ball track system -- Part 2: Dimensions and designation of receivers

ISO 12:1987

Aerospace -- Pipelines -- Identification

ISO 16698:2013

Space environment (natural and artificial) -- Methods for estimation of future geomagnetic activity

ISO/TS 10303-1062:2011

Industrial automation systems and integration -- Product data representation and exchange -- Part 1062: Application module: Contract

ISO/TS 10303-1021:2011

Industrial automation systems and integration -- Product data representation and exchange -- Part 1021: Application module: Identification assignment

ISO/TS 10303-1013:2011

Industrial automation systems and integration -- Product data representation and exchange -- Part 1013: Application module: Person organization assignment

ISO/IEC 10918-6:2013

Information technology -- Digital compression and coding of continuous-tone still images: Application to printing systems

ISO 16647:2018

Nuclear facilities -- Criteria for design and operation of confinement systems for nuclear worksite and for nuclear installations under decommissioning

ISO 1180:1983

Shanks for pneumatic tools and fitting dimensions of chuck bushings

ISO/TS 13399-306:2018

Cutting tool data representation and exchange -- Part 306: Creation and exchange of 3D models -- Drills and countersinking tools for indexable inserts

ISO 9386-1:2000

Power-operated lifting platforms for persons with impaired mobility -- Rules for safety, dimensions and functional operation -- Part 1: Vertical lifting platforms

ISO 9386-2:2000

Power-operated lifting platforms for persons with impaired mobility -- Rules for safety, dimensions and functional operation -- Part 2: Powered stairlifts for seated, standing and wheelchair users moving in an inclined plane

ISO 105-P02:2002

Textiles -- Tests for colour fastness -- Part P02: Colour fastness to pleating: Steam pleating

ISO 14691:2008

Petroleum, petrochemical and natural gas industries -- Flexible couplings for mechanical power transmission -- General-purpose applications

ISO/TS 10303-1817:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1817: Application module: Kinematic analysis control and result

ISO 105-Z10:1997

Textiles -- Tests for colour fastness -- Part Z10: Determination of relative colour strength of dyes in solution

ISO/TS 10303-1821:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1821: Apllication module: Externally conditioned data quality criteria

ISO/TS 17536-5:2018

Road Vehicles -- Aerosol separator performance test for internal combustion engines -- Part 5: Engine fractional efficiency test method and upstream distribution sampling method

ISO 12818:2013

Glass packaging -- Standard tolerances for flaconnage

ISO 19624:2018

Bamboo structures -- Grading of bamboo culms -- Basic principles and procedures

ISO 11174:1996

Workplace air -- Determination of particulate cadmium and cadmium compounds -- Flame and electrothermal atomic absorption spectrometric method

ISO 6975:1997

Natural gas -- Extended analysis -- Gas-chromatographic method

ISO/IEC 15938-1:2002

Information technology -- Multimedia content description interface -- Part 1: Systems

ISO 14829:2002

Freight containers -- Straddle carriers for freight container handling -- Calculation of stability

ISO 5420:1983

Reamers -- Terms, definitions and types

ISO 5422:1982

Road vehicles -- Anchorages for towing ropes, cables or bars

ISO 12932:2013

Welding -- Laser-arc hybrid welding of steels, nickel and nickel alloys -- Quality levels for imperfections

ISO 5223:1995

Test sieves for cereals

ISO 8562:1990

Cycles -- Stem wedge angle

ISO 5285:2012

Conveyor belts -- Guidelines for storage and handling

ISO/IEC 15938-2:2002

Information technology -- Multimedia content description interface -- Part 2: Description definition language

ISO 16002:2004

Stored cereal grains and pulses -- Guidance on the detection of infestation by live invertebrates by trapping

ISO 519:1992

Photography -- Hand-held cameras -- Flash-connector dimensions

ISO 10819:2013

Mechanical vibration and shock -- Hand-arm vibration -- Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand

ISO 4578:1997

Adhesives -- Determination of peel resistance of high-strength adhesive bonds -- Floating-roller method

ISO/TS 11999-2:2015

PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 2: Compatibility

ISO 20728:2018

Corrosion of metal and alloys -- Determination of resistance of magnesium alloys to stress corrosion cracking

ISO 10555-5:2013

Intravascular catheters -- Sterile and single-use catheters -- Part 5: Over-needle peripheral catheters

ISO 26021-5:2009

Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 5: Additional communication line with pulse width modulated signal

ISO 6889:1986

Surface active agents -- Determination of interfacial tension by drawing up liquid films

ISO 16632:2013

Tobacco and tobacco products -- Determination of water content -- Gas-chromatographic method

ISO 26021-4:2009

Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 4: Additional communication line with bidirectional communication

ISO 26021-3:2009

Road vehicles -- End-of-life activation of on-board pyrotechnic devices -- Part 3: Tool requirements

ISO 2935:1974

Circular saw blades for woodworking -- Dimensions

ISO/IEC 23001-2:2008

Information technology -- MPEG systems technologies -- Part 2: Fragment request units

ISO 15487:2018

Textiles -- Method for assessing appearance of apparel and other textile end products after domestic washing and drying

ISO 3534-3:2013

Statistics -- Vocabulary and symbols -- Part 3: Design of experiments

ISO/TS 10303-1709:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1709: Application module: Packaged part white box model

ISO 5407:1981

As-sintered hardmetal pellets used in heading dies -- Dimensions and tolerances

ISO 16236:2013

Crop protection equipment -- Test method for the determination of drainable volume and its concentration

ISO 14544:2013

Fine ceramics (advanced ceramics, advanced technical ceramics) -- Mechanical properties of ceramic composites at high temperature -- Determination of compression properties

ISO/TS 10303-304:2001

Industrial automation systems and integration -- Product data representation and exchange -- Part 304: Abstract test suite: Mechanical design using boundary representation

ISO 5313:1986

High nitrogen content, straight ammonium nitrate fertilizers -- Determination or oil retention

ISO 296:1991

Machine tools -- Self-holding tapers for tool shanks

ISO 19078:2013

Gas cylinders -- Inspection of the cylinder installation, and requalification of high pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles

ISO/IEC 11072:1992

Information technology -- Computer graphics -- Computer Graphics Reference Model

ISO 379:1980

Gymnastic equipment -- Horizontal bar

ISO/IEC 23000-2:2008

Information technology -- Multimedia application format (MPEG-A) -- Part 2: MPEG music player application format

ISO/TS 10303-1720:2014

Industrial automation systems and integration -- Product data representation and exchange -- Part 1720: Application module: Part template shape with parameters

ISO 10325:2018

Fibre ropes -- High modulus polyethylene -- 8-strand braided ropes, 12-strand braided ropes and covered ropes

ISO 234-2:1982

Files and rasps -- Part 2: Characteristics of cut

ISO 29783-1:2008

Prosthetics and orthotics -- Vocabulary -- Part 1: Normal gait