ISO 14085-6:2015

Aerospace series — Hydraulic filter elements — Test methods — Part 6: Initial cleanliness level

ISO 14085-5:2015

Aerospace series — Hydraulic filter elements — Test methods — Part 5: Resistance to flow fatigue

ISO 14085-4:2015

Aerospace series — Hydraulic filter elements — Test methods — Part 4: Verification of collapse/burst pressure rating

ISO 6993-1:2006

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)

ISO 6993-2:2006

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)

ISO 6993-3:2006

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)

ISO 1693:1976

Cryolite, natural and artificial — Determination of fluorine content — Modified Willard-Winter method

ISO 6993-4:2006

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 4: Code of practice for design, handling and installation

ISO 105-B04:1994

Textiles — Tests for colour fastness — Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test

ISO 21716-1:2020

Ships and marine technology — Bioassay methods for screening anti-fouling paints — Part 1: General requirements

ISO 22437:2018

Aerospace series — Pipe coupling 8°30' in titanium alloy — Nut for welded ferrule

ISO 18561-1:2020

Intelligent transport systems (ITS) — Urban mobility applications via nomadic device for green transport management — Part 1: General requirements for data exchange between ITS stations

ISO 22438:2018

Aerospace series — Pipe coupling 8°30' in titanium alloy — Thrust wires

ISO 10110-6:2015

Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances

ISO 22391-2:2009/AMD 1:2020

Plastics piping systems for hot and cold water installations — Polyethylene of raised temperature resistance (PE-RT) — Part 2: Pipes — Amendment 1

ISO 15877-5:2009/AMD 2:2020

Plastics piping systems for hot and cold water installations — Chlorinated poly(vinyl chloride) (PVC-C) — Part 5: Fitness for purpose of the system — Amendment 2

ISO/IEC 30113-1:2015

Information technology — User interface — Gesture-based interfaces across devices and methods — Part 1: Framework

ISO/IEC 30118-1:2018

Information technology — Open Connectivity Foundation (OCF) Specification — Part 1: Core specification

ISO 16861:2015

Petroleum products — Fuels (class F) — Specifications of dimethyl ether (DME)

ISO/IEC/IEEE 8802-22:2015

Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 22: Cognitive Wireless RAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications: Policies and Procedures for Operation in the TV Bands

ISO 9373:1989

Cranes and related equipment — Accuracy requirements for measuring parameters during testing

ISO 19433:2008

Building construction machinery and equipment — Pedestrian-controlled vibratory plates — Terminology and commercial specifications

ISO 19452:2008

Building construction machinery and equipment — Pedestrian-controlled vibratory (percussion) rammers — Terminology and commercial specifications

ISO/TR 23383:2020

Textiles and textile products — Smart (Intelligent) textiles— Definitions, categorisation, applications and standardization needs

ISO 5290:2001

Belt drives — Grooved pulleys for joined narrow V-belts — Groove sections 9N/J, 15N/J and 25N/J (effective system)

ISO 21716-3:2020

Ships and marine technology — Bioassay methods for screening anti-fouling paints — Part 3: Mussels

ISO 15841:2014/AMD 1:2020

Dentistry — Wires for use in orthodontics — Amendment 1

ISO 21716-2:2020

Ships and marine technology — Bioassay methods for screening anti-fouling paints — Part 2: Barnacles

ISO 16495:2013

Packaging — Transport packaging for dangerous goods — Test methods

ISO 2834-1:2020

Graphic technology — Laboratory preparation of test prints — Part 1: Paste inks

IWA 35:2020

Quality of learning environments for students in healthcare professions — Requirements for healthcare education providers in care settings

ISO 11665-4:2020

Measurement of radioactivity in the environment — Air: radon-222 — Part 4: Integrated measurement method for determining average activity concentration using passive sampling and delayed analysis

ISO/TS 11819-3:2017

Acoustics — Measurement of the influence of road surfaces on traffic noise — Part 3: Reference tyres

ISO 4190-5:2006

Lift (Elevator) installation — Part 5: Control devices, signals and additional fittings

ISO 17356-6:2006

Road vehicles — Open interface for embedded automotive applications — Part 6: OSEK/VDX Implementation Language (OIL)

ISO 22902-3:2006

Road vehicles — Automotive multimedia interface — Part 3: System requirements

ISO 22902-2:2006

Road vehicles — Automotive multimedia interface — Part 2: Use cases

ISO 22902-6:2006

Road vehicles — Automotive multimedia interface — Part 6: Vehicle interface requirements

ISO 22902-7:2006

Road vehicles — Automotive multimedia interface — Part 7: Physical specification

ISO 17356-3:2005

Road vehicles — Open interface for embedded automotive applications — Part 3: OSEK/VDX Operating System (OS)

ISO 10109:2015

Optics and photonics — Guidance for the selection of environmental tests

ISO 22902-5:2006

Road vehicles — Automotive multimedia interface — Part 5: Common message set

ISO 22902-4:2006

Road vehicles — Automotive multimedia interface — Part 4: Network protocol requirements for vehicle interface access

ISO/HL7 27951:2009

Health informatics — Common terminology services, release 1

ISO/TS 16096:2014

Reclaimed isobutene-isoprene (IIR) rubber — Evaluation procedure

ISO/TS 16095:2014

Reclaimed rubber derived from products containing mainly natural rubber — Evaluation procedure

ISO 19942:2018/AMD 1:2020

Maize (Zea mays L.) — Specification — Amendment 1: Feed maize

ISO 9772:2020

Cellular plastics — Determination of horizontal burning characteristics of small specimens subjected to a small flame

ISO 5667-10:2020

Water quality — Sampling — Part 10: Guidance on sampling of waste water

ISO 15750-3:2002

Packaging — Steel drums — Part 3: Inserted flange-type closure systems

ISO/IEC 23092-5:2020

Information technology — Genomic information representation — Part 5: Conformance

ISO 17258:2015

Statistical methods — Six Sigma — Basic criteria underlying benchmarking for Six Sigma in organisations

ISO/IEC 10373-6:2020/AMD 2:2020

Cards and security devices for personal identification — Test methods — Part 6: Contactless proximity objects — Amendment 2: Enhancements for harmonization

ISO 3136:1983

Rubber latex — Styrene-butadiene — Determination of bound styrene content

ISO 3408-3:2006

Ball screws — Part 3: Acceptance conditions and acceptance tests

ISO/IEC 11581-1:2000

Information technology — User system interfaces and symbols — Icon symbols and functions — Part 1: Icons — General

ISO 105-E06:2006

Textiles — Tests for colour fastness — Part E06: Colour fastness to spotting: Alkali

ISO 11600:2002

Building construction — Jointing products — Classification and requirements for sealants

ISO 9635-4:2014

Agricultural irrigation equipment — Irrigation valves — Part 4: Air valves

ISO 22089:2009

Aerospace — Hydraulic power transfer units — General specifications

ISO 8536-2:2010

Infusion equipment for medical use — Part 2: Closures for infusion bottles

ISO 12584:2013

Aerospace — Hydraulic fluid components — Expression of particulate contamination levels

ISO/TS 11669:2012

Translation projects — General guidance

ISO/TR 17534-4:2020

Acoustics — Software for the calculation of sound outdoors — Part 4: Recommendations for a quality assured implementation of the COMMISSION DIRECTIVE (EU) 2015/996 in software according to ISO 17534-1

ISO 2435:1973

Nitrogen for use in aircraft

ISO 2434:1973

Compressed non-breathing air for use in aircraft

ISO 4354:2009

Wind actions on structures

ISO 11432:2005

Building construction — Sealants — Determination of resistance to compression

ISO 22561:2020

Gasoline engines with direct fuel injection (GDI engines) — Installation of the injectors to the engine

ISO 10591:2005

Building construction — Sealants — Determination of adhesion/cohesion properties of sealants after immersion in water

ISO/TS 21522:2017

Rubber process fumes components — Quantitative test methods

ISO 21710:2020

Biotechnology — Specification on data management and publication in microbial resource centers

ISO 21709:2020

Biotechnology — Biobanking — Process and quality requirements for establishment, maintenance and characterization of mammalian cell lines

ISO 17541:2014

Plastics — Quantitative evaluation of scratch-induced damage and scratch visibility

ISO 3691-6:2013

Industrial trucks — Safety requirements and verification — Part 6: Burden and personnel carriers

ISO 12967-3:2020

Health informatics — Service architecture (HISA) — Part 3: Computational viewpoint

ISO/TS 17137:2019

Cardiovascular implants and extracorporeal systems — Cardiovascular absorbable implants

ISO 12967-1:2020

Health informatics — Service architecture (HISA) — Part 1: Enterprise viewpoint

ISO 12967-2:2020

Health informatics — Service architecture (HISA) — Part 2: Information viewpoint

ISO 12215-7:2020

Small craft — Hull construction and scantlings — Part 7: Determination of loads for multihulls and of their local scantlings using ISO 12215-5

ISO/TS 80004-8:2020

Nanotechnologies — Vocabulary — Part 8: Nanomanufacturing processes

ISO 3912:1977

Woodruff keys and keyways

ISO 21860:2020

Health Informatics — Reference standards portfolio (RSP) — Clinical imaging

ISO 12856-2:2020

Railway applications — Polymeric composite sleepers, bearers and transoms — Part 2: Product testing

ISO 27145-6:2015

Road vehicles — Implementation of World-Wide Harmonized On-Board Diagnostics (WWH-OBD) communication requirements — Part 6: External test equipment

ISO 16967:2015

Solid biofuels — Determination of major elements — Al, Ca, Fe, Mg, P, K, Si, Na and Ti

ISO 23493:2020

Welding and allied processes — Process specification for laser-arc hybrid welding for metallic materials

ISO 16968:2015

Solid biofuels — Determination of minor elements

ISO/IEEE 11073-10441:2015

Health informatics — Personal health device communication — Part 10441: Device specialization — Cardiovascular fitness and activity monitor

ISO 4179:2005

Ductile iron pipes and fittings for pressure and non-pressure pipelines — Cement mortar lining

ISO 15500-4:2020

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 4: Manual valve

ISO 8829-1:2009

Aerospace — Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies — Part 1: Metallic (stainless steel) braid

ISO 15500-5:2020

Road vehicles — Compressed natural gas (CNG) fuel system components — Part 5: Manual cylinder valve

ISO 8981:1993

Wheat — Identification of varieties by electrophoresis

ISO 9939:1994

Aerospace — Pressure re-oiling connection (new type)

ISO/IEC 29136:2012

Information technology — User interfaces — Accessibility of personal computer hardware

ISO 23935:2006

Aircraft — Environmental test procedures for airborne fluid system components — Resistance to fire in designated fire zones

ISO 11040-4:2015

Prefilled syringes — Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling

ISO 20524-2:2020

Intelligent transport systems — Geographic Data Files (GDF) GDF5.1 — Part 2: Map data used in automated driving systems, Cooperative ITS, and multi-modal transport

ISO 21863:2020

Water quality — Determination of alkylmercury compounds in water — Method using gas chromatography-mass spectrometry (GC-MS) after phenylation and solvent extraction

ISO 3391:1976

Cryolite, natural and artificial — Determination of calcium content — Flame atomic absorption method

ISO 23472-2:2020

Foundry machinery — Vocabulary — Part 2: Molding and coremaking machines and other equipment related to non-permanent mold casting process

ISO 6953-2:2015

Pneumatic fluid power — Compressed air pressure regulators and filter-regulators — Part 2: Test methods to determine the main characteristics to be included in literature from suppliers

ISO 19043:2015

Natural rubber latex concentrate — Determination of total phosphate content by spectrophotometric method

ISO 1242:1999

Essential oils — Determination of acid value

ISO 9022-2:2015

Optics and photonics — Environmental test methods — Part 2: Cold, heat and humidity

ISO 8729-2:2009

Ships and marine technology — Marine radar reflectors — Part 2: Active type

ISO 7006:1981

Woodworking machines — Diameters of spindles for receiving circular sawblades

ISO/IEC TS 22237-2:2018

Information technology — Data centre facilities and infrastructures — Part 2: Building construction

ISO 16000-28:2020

Indoor air — Part 28: Determination of odour emissions from building products using test chambers

ISO 10303-238:2020

Industrial automation systems and integration — Product data representation and exchange — Part 238: Application protocol: Model based integrated manufacturing

ISO 16075-2:2020

Guidelines for treated wastewater use for irrigation projects — Part 2: Development of the project

ISO 22043:2020

Ice-cream freezers — Classification, requirements and test conditions

ISO 16075-1:2020

Guidelines for treated wastewater use for irrigation projects — Part 1: The basis of a reuse project for irrigation

ISO 80369-1:2018

Small-bore connectors for liquids and gases in healthcare applications — Part 1: General requirements

ISO 24253-2:2015

Crop protection equipment — Spray deposition test for field crop — Part 2: Measurement in a crop

ISO 16122-2:2015

Agricultural and forestry machinery — Inspection of sprayers in use — Part 2: Horizontal boom sprayers

ISO 24253-1:2015

Crop protection equipment — Spray deposition test for field crop — Part 1: Measurement in a horizontal plane

ISO 22915-22:2014

Industrial trucks — Verification of stability — Part 22: Lateral- and front-stacking trucks with and without elevating operator position

ISO/IEC 29168-1:2011

Information technology — Open systems interconnection — Part 1: Object identifier resolution system

ISO 16122-3:2015

Agricultural and forestry machinery — Inspection of sprayers in use — Part 3: Sprayers for bush and tree crops

ISO 105-E08:1994

Textiles — Tests for colour fastness — Part E08: Colour fastness to hot water

ISO 105-X05:1994

Textiles — Tests for colour fastness — Part X05: Colour fastness to organic solvents

ISO 105-X04:1994

Textiles — Tests for colour fastness — Part X04: Colour fastness to mercerizing

ISO/IEC TS 22237-6:2018

Information technology — Data centre facilities and infrastructures — Part 6: Security systems

ISO 3174:1994

Aircraft — Connections for checking hydraulic systems by ground appliances — Threaded type