ISO 10428:1993

Petroleum and natural gas industries — Sucker rods (pony rods, polished rods, couplings and sub-couplings) — Specification

ISO 11399:1995

Ergonomics of the thermal environment — Principles and application of relevant International Standards

ISO 9357:1990

Equipment for crop protection — Agricultural sprayers — Tank nominal volume and filling hole diameter

ISO 10136-6:1993

Glass and glassware — Analysis of extract solutions — Part 6: Determination of boron(III) oxide by molecular absorption spectrometry

ISO/TS 16506:2017

Dentistry — Polymer-based luting materials containing adhesive components

ISO 6489-4:2004

Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 4: Dimensions of piton-type coupling

ISO 27509:2020

Petroleum and natural gas industries — Compact flanged connections with IX seal ring

ISO 10545-6:2010

Ceramic tiles — Part 6: Determination of resistance to deep abrasion for unglazed tiles

ISO/IEC 14496-1:2010

Information technology — Coding of audio-visual objects — Part 1: Systems

ISO/IEC 23000-11:2009

Information technology — Multimedia application format (MPEG-A) — Part 11: Stereoscopic video application format

ISO 22915-24:2015

Industrial trucks — Verification of stability — Part 24: Slewing variable-reach rough-terrain trucks

ISO 610:1990

High-tensile steel chains (round link) for chain conveyors and coal ploughs

ISO 15634:2015

Iron ores — Determination of chromium content — Flame atomic absorption spectrometric method

ISO 16602:2007

Protective clothing for protection against chemicals — Classification, labelling and performance requirements

ISO 839-1:2006

Milling machine arbors with 7/24 tapers — Part 1: Dimensions and designation

ISO 13441-2:1997

Air-assisted agricultural sprayers — Data sheets — Part 2: Technical specifications related to components

IEC 81714-2:2006

Design of graphical symbols for use in the technical documentation of products — Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange

ISO 5131:2015

Tractors for agriculture and forestry — Measurement of noise at the operator's position — Survey method

ISO 7216:2015

Agricultural and forestry tractors — Measurement of noise emitted when in motion

ISO 9093:2020

Small craft — Seacocks and through-hull fittings

ISO 2186:2007

Fluid flow in closed conduits — Connections for pressure signal transmissions between primary and secondary elements

ISO 5351:2010

Pulps — Determination of limiting viscosity number in cupri-ethylenediamine (CED) solution

ISO 5562:1983

Turmeric, whole or ground (powdered) — Specification

ISO 5563:1984

Dried peppermint (Mentha piperita Linnaeus) — Specification

ISO 6432:2015

Pneumatic fluid power — Single rod cylinders, 1 000 kPa (10 bar) series, bores from 8 mm to 25 mm — Basic and mounting dimensions

ISO 13626:2003

Petroleum and natural gas industries — Drilling and production equipment — Drilling and well-servicing structures

ISO 286-1:2010

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits

ISO 81714-1:2010

Design of graphical symbols for use in the technical documentation of products — Part 1: Basic rules

ISO/IEC 21000-14:2007

Information technology — Multimedia framework (MPEG-21) — Part 14: Conformance Testing

ISO/IEC 30161:2020

Internet of Things (IoT) — Requirements of IoT data exchange platform for various IoT services

ISO 1217:2009

Displacement compressors — Acceptance tests

ISO 28178:2009

Graphic technology — Exchange format for colour and process control data using XML or ASCII text

ISO 21626-1:2020

Bamboo charcoal — Part 1: Generalities

ISO 17126:2005

Soil quality — Determination of the effects of pollutants on soil flora — Screening test for emergence of lettuce seedlings (Lactuca sativa L.)

ISO 21626-3:2020

Bamboo charcoal — Part 3: Purification applications

ISO 21626-2:2020

Bamboo charcoal — Part 2: Fuel applications

ISO 12082:2006

Processed cheese and processed cheese products — Calculation of the content of added citrate emulsifying agents and acidifiers/pH-controlling agents, expressed as citric acid

ISO 10136-1:1993

Glass and glassware — Analysis of extract solutions — Part 1: Determination of silicon dioxide by molecular absorption spectrometry

ISO 10136-2:1993

Glass and glassware — Analysis of extract solutions — Part 2: Determination of sodium oxide and potassium oxide by flame spectrometric methods

ISO 10136-3:1993

Glass and glasssware — Analysis of extract solutions — Part 3: Determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry

ISO 10130:2009

Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC, post-column photolysis and derivatization

ISO 6149-2:2006

Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 2: Dimensions, design, test methods and requirements for heavy-duty (S series) stud ends

 ISO 4301-2:2020

Cranes — Classification — Part 2: Mobile cranes

ISO 6489-2:2002

Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 2: Specifications for clevis coupling 40

ISO 10136-4:1993

Glass and glassware — Analysis of extract solutions — Part 4: Determination of aluminium oxide by molecular absorption spectrometry

ISO 10136-5:1993

Glass and glassware — Analysis of extract solutions — Part 5: Determination of iron(III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry

ISO 2145:1978

Documentation — Numbering of divisions and subdivisions in written documents

ISO/IEC 15938-13:2015

Information technology — Multimedia content description interface — Part 13: Compact descriptors for visual search

ISO 5753-1:2009

Rolling bearings — Internal clearance — Part 1: Radial internal clearance for radial bearings

ISO 22514-3:2020

Statistical methods in process management — Capability and performance — Part 3: Machine performance studies for measured data on discrete parts

ISO 692:1982

Pulps — Determination of alkali solubility

ISO 13366-2:2006

Milk — Enumeration of somatic cells — Part 2: Guidance on the operation of fluoro-opto-electronic counters

ISO 16671:2015

Ophthalmic implants — Irrigating solutions for ophthalmic surgery

ISO/IEC 29109-4:2010

Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 4: Finger image data

ISO 730:2009

Agricultural wheeled tractors — Rear-mounted three-point linkage — Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4

ISO 6149-3:2006

Connections for hydraulic fluid power and general use — Ports and stud ends with ISO 261 metric threads and O-ring sealing — Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends

ISO 13007-5:2015

Ceramic tiles — Grouts and adhesives — Part 5: Requirements, test methods, evaluation of conformity, classification and designation of liquid-applied waterproofing membranes for use beneath ceramic tiling bonded with adhesives

ISO 12151-4:2007

Connections for hydraulic fluid power and general use — Hose fittings — Part 4: Hose fittings with ISO 6149 metric stud ends

ISO 12151-5:2007

Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends

ISO 17859:2015

Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement method of piezoelectric strain at high electric field

ISO 4157-2:1998

Construction drawings — Designation systems — Part 2: Room names and numbers

ISO/TS 20273:2017

Guidelines on weld quality in relationship to fatigue strength

ISO 6874:2015

Dentistry — Polymer-based pit and fissure sealants

ISO 8143:2010

Thermal insulation products for building equipment and industrial installations — Calcium silicate products

ISO 649-1:1981

Laboratory glassware — Density hydrometers for general purposes — Part 1: Specification

ISO 649-2:1981

Laboratory glassware — Density hydrometers for general purposes — Part 2: Test methods and use

ISO 650:1977

Relative density 60/60 degrees F hydrometers for general purposes

ISO 1271:1983

Essential oils — Determination of carbonyl value — Free hydroxylamine method

ISO 9431:1990

Construction drawings — Spaces for drawing and for text, and title blocks on drawing sheets

ISO 13850:2015

Safety of machinery — Emergency stop function — Principles for design

ISO 18565:2015

Document management — AFP/Archive

ISO 1108:1992

Spices and condiments — Determination of non-volatile ether extract

ISO 3679:2015

Determination of flash no-flash and flash point — Rapid equilibrium closed cup method

ISO/IEC 18026:2009

Information technology — Spatial Reference Model (SRM)

ISO 19732:2007

Equipment for crop protection — Sprayer filters — Colour coding for identification

ISO 25178-601:2010

Geometrical product specifications (GPS) — Surface texture: Areal — Part 601: Nominal characteristics of contact (stylus) instruments

ISO 7464:1983

Earth-moving machinery — Method of test for the measurement of drawbar pull

ISO 14999-4:2015

Optics and photonics — Interferometric measurement of optical elements and optical systems — Part 4: Interpretation and evaluation of tolerances specified in ISO 10110

ISO/IEC 17823:2015

Information technology — Office equipment — Colour terminology for office colour equipment

ISO 10545-14:2015

Ceramic tiles — Part 14: Determination of resistance to stains

ISO 10519:2015

Rapeseed — Determination of chlorophyll content — Spectrometric method

ISO/IEC 14496-2:2004

Information technology — Coding of audio-visual objects — Part 2: Visual

ISO 16657:2006

Sensory analysis — Apparatus — Olive oil tasting glass

ISO 7963:2006

Non-destructive testing — Ultrasonic testing —- Specification for calibration block No. 2

ISO 25178-6:2010

Geometrical product specifications (GPS) — Surface texture: Areal — Part 6: Classification of methods for measuring surface texture

ISO 1122-2:1999

Vocabulary of gear terms — Part 2: Definitions related to worm gear geometry

ISO/TS 11672:2016

Connectors for fluid power and general use — Designation and nomenclature

ISO 7386:1984

Aniseed (Pimpinella anisum Linnaeus) — Specification

ISO 1871:2009

Food and feed products — General guidelines for the determination of nitrogen by the Kjeldahl method

ISO/TR 23576:2020

Blockchain and distributed ledger technologies — Security management of digital asset custodians

ISO 6196-8:1998

Micrographics — Vocabulary — Part 8: Use

ISO 16779:2015

Sensory analysis — Assessment (determination and verification) of the shelf life of foodstuffs

ISO/IEC 29794-6:2015

Information technology — Biometric sample quality — Part 6: Iris image data

ISO/IEC 19775-2:2015

Information technology — Computer graphics, image processing and environmental data representation — Extensible 3D (X3D) — Part 2: Scene access interface (SAI)

ISO 10319:2015

Geosynthetics — Wide-width tensile test

ISO 2825:1981

Spices and condiments — Preparation of a ground sample for analysis

ISO 12988-1:2000

Carbonaceous materials used in the production of aluminium — Baked anodes — Determination of the reactivity to carbon dioxide — Part 1: Loss in mass method

ISO 4347:2015

Leaf chains, clevises and sheaves — Dimensions, measuring forces, tensile strengths and dynamic strengths

ISO/IEC 29159-1:2010

Information technology — Biometric calibration, augmentation and fusion data — Part 1: Fusion information format

ISO 13356:2015

Implants for surgery — Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP)

ISO 856:2006

Oil of peppermint (Mentha x piperita L.)

ISO 4157-3:1998

Construction drawings — Designation systems — Part 3: Room identifiers

ISO 13491-2:2017

Financial services — Secure cryptographic devices (retail) — Part 2: Security compliance checklists for devices used in financial transactions

ISO 11257:2015

Iron ores for shaft direct-reduction feedstocks — Determination of the low-temperature reduction-disintegration index and degree of metallization

ISO 14847:1999

Rotary positive displacement pumps — Technical requirements

ISO/IEC 11172-1:1993

Information technology — Coding of moving pictures and associated audio for digital storage media at up to about 1,5 Mbit/s — Part 1: Systems

ISO 12739:2006

Zinc sulfide concentrates — Determination of zinc — Ion-exchange/EDTA titrimetric method

ISO 14436:2010

Pulps — Standard tap water for drainability measurements — Conductivity 40 mS/m to 150 mS/m

ISO 13083:2015

Surface chemical analysis — Scanning probe microscopy — Standards on the definition and calibration of spatial resolution of electrical scanning probe microscopes (ESPMs) such as SSRM and SCM for 2D-dopant imaging and other purposes

ISO 13202:2003

Cranes — Measurement of velocity and time parameters

ISO 17628:2015

Geotechnical investigation and testing — Geothermal testing — Determination of thermal conductivity of soil and rock using a borehole heat exchanger

ISO 10957:2009

Information and documentation — International standard music number (ISMN)

ISO 16905:2015

Resilient floor coverings — Specification for rubber floor covering — Tile/Plank

ISO/TS 24520:2017

Service activities relating to drinking water supply systems and wastewater systems — Crisis management — Good practice for technical aspects

ISO 4695:2015

Iron ores for blast furnace feedstocks — Determination of the reducibility by the rate of reduction index

ISO 7992:2015

Iron ores for blast furnace feedstocks — Determination of reduction under load

ISO 1768:1975

Glass hydrometers — Conventional value for the thermal cubic expansion coefficient (for use in the preparation of measurement tables for liquids)

ISO 8897:2010

Oil of juniper berry (Juniperus communis L.)

ISO 5074:2015

Hard coal — Determination of Hardgrove grindability index

ISO 18782:2015

Textiles — Determination of dynamic hygroscopic heat generation

ISO 23070:2020

Water Reuse in Urban Areas — Guidelines for reclaimed water treatment: Design principles of a RO treatment system of municipal wastewater

ISO 15733:2015

Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at ambient temperature in air atmospheric pressure — Determination of tensile properties

ISO 15227:2000

Optics and optical instruments — Microscopes — Testing of stereomicroscopes

ISO 13441-1:1997

Air-assisted agricultural sprayers — Data sheets — Part 1: Typical layout

ISO 18137:2015

Leaf springs — Technical specifications

ISO/IEC TS 11581-41:2014

Information technology — User interface icons — Part 41: Data structure to be used by the ISO/IEC JTC 1/SC 35 icon database

ISO 14404-4:2020

Calculation method of carbon dioxide emission intensity from iron and steel production — Part 4: Guidance for using the ISO 14404 series

ISO 19272:2015

Low alloyed steel — Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu - Glow discharge optical emission spectrometry (routine method)

ISO 17874-5:2007

Remote handling devices for radioactive materials — Part 5: Remote handling tongs

ISO 24041:2020

Ships and marine technology — Shark jaws and towing pins

ISO 13542:2006

Paper and board — Specification for internal diameters of cores for reels

ISO 8773:2006

Plastics piping systems for non-pressure underground drainage and sewerage — Polypropylene (PP)

ISO 7991:1987

Glass — Determination of coefficient of mean linear thermal expansion

ISO 8772:2006

Plastics piping systems for non-pressure underground drainage and sewerage — Polyethylene (PE)

ISO 15488:2003

Collets with 8 degree setting angle for tool shanks — Collets, nuts and fitting dimensions

ISO 9599:2015

Copper, lead, zinc and nickel sulfide concentrates — Determination of hygroscopic moisture content of the analysis sample — Gravimetric method

ISO 6848:2015

Arc welding and cutting — Nonconsumable tungsten electrodes — Classification

ISO 18192-2:2010

Implants for surgery — Wear of total intervertebral spinal disc prostheses — Part 2: Nucleus replacements

ISO 11798:1999

Information and documentation — Permanence and durability of writing, printing and copying on paper — Requirements and test methods

ISO 14065:2020

General principles and requirements for bodies validating and verifying environmental information

ISO 7731:2003

Ergonomics — Danger signals for public and work areas — Auditory danger signals

ISO/IEC 30113-61:2020

Information technology — Gesture-based interfaces across devices and methods — Part 61: Single-point gestures for screen readers

ISO 13265:2010

Thermoplastics piping systems for non-pressure underground drainage and sewerage — Joints for buried non-pressure applications — Test method for the long-term sealing performance of joints with elastomeric seals by estimating the sealing pressure

ISO 10093:2020

Plastics — Fire tests — Standard ignition sources

ISO 24617-2:2020

Language resource management — Semantic annotation framework (SemAF) — Part 2: Dialogue acts

ISO 15639-1:2015

Radio frequency identification of animals — Standardization of injection sites for different animal species — Part 1: Companion animals (cats and dogs)

ISO 105-E12:2010

Textiles — Tests for colour fastness — Part E12: Colour fastness to milling: Alkaline milling

ISO 105-E07:2010

Textiles — Tests for colour fastness — Part E07: Colour fastness to spotting: Water

ISO 13628-6:2006

Petroleum and natural gas industries — Design and operation of subsea production systems — Part 6: Subsea production control systems

ISO 105-E09:2010

Textiles — Tests for colour fastness — Part E09: Colour fastness to potting

ISO 29805:2009

Thermal insulation products for building applications — Determination of the mechanical properties of glass fibre meshes

ISO 15494:2015

Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system

ISO 7884-6:1987

Glass — Viscosity and viscometric fixed points — Part 6: Determination of softening point

ISO 7884-7:1987

Glass — Viscosity and viscometric fixed points — Part 7: Determination of annealing point and strain point by beam bending

ISO 4356:1977

Bases for the design of structures — Deformations of buildings at the serviceability limit states

ISO 19005-1:2005

Document management — Electronic document file format for long-term preservation — Part 1: Use of PDF 1.4 (PDF/A-1)

ISO 15769:2010

Hydrometry — Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods

ISO 5198:1987

Centrifugal, mixed flow and axial pumps — Code for hydraulic performance tests — Precision grade