ISO/TS 11619:2014

Polyurethane tubing for use primarily in pneumatic installations — Dimensions and specification

ISO 19880-5:2019

Gaseous hydrogen — Fuelling stations — Part 5: Dispenser hoses and hose assemblies

ISO 21612:2021

Road vehicles — Crosstalk determination for multi-axis load cell

ISO 7546:1983

Earth-moving machinery — Loader and front loading excavator buckets — Volumetric ratings

ISO 8775:1988

Aerospace — Gaseous oxygen replenishment connection for use in fluid systems (new type) — Dimensions (Inch series)

ISO 18563-1:2015

Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 1: Instruments

ISO 13480:1997

Polyethylene pipes — Resistance to slow crack growth — Cone test method

ISO/IEC 23000-22:2019/AMD 1:2021

Information technology — Multimedia application format (MPEG-A) — Part 22: Multi-image application format (MIAF) — Amendment 1: Reference software and conformance for multi-image application format

ISO 8469:2021

Small craft — Non-fire-resistant fuel hoses

ISO 7840:2021

Small craft — Fire-resistant fuel hoses

ISO 17103:2009

Agricultural machinery — Rotary disc mowers, rotary drum mowers and flail mowers — Test methods and acceptance criteria for protective skirts

ISO 21649:2006

Needle-free injectors for medical use — Requirements and test methods

ISO 7761:2004

Micrographics — Single-core cartridge for 16 mm processed microfilm — Dimensions and operational constraints

ISO 18431-4:2007

Mechanical vibration and shock — Signal processing — Part 4: Shock-response spectrum analysis

ISO 3746:2010

Acoustics — Determination of sound power levels and sound energy levels of noise sources using sound pressure — Survey method using an enveloping measurement surface over a reflecting plane

ISO 6754:1996

Dried thyme (Thymus vulgaris L.) — Specification

ISO 7803:1987

Commercial road vehicles — Steering ball joints

ISO 11406:2001

Commercial road vehicles — Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers — Interchangeability

ISO 5553:1980

Meat and meat products — Detection of polyphosphates

ISO 1741:1980

Dextrose — Determination of loss in mass on drying — Vacuum oven method

ISO/IEC 15414:2015

Information technology — Open distributed processing — Reference model — Enterprise language

ISO 3301:1975

Statistical interpretation of data — Comparison of two means in the case of paired observations

ISO 6519:2015

Diesel engines — Fuel injection pumps — Tapers for shaft ends and hubs

ISO 5433:2013

Leather — Bovine wet blue — Specification

ISO 5431:2013

Leather — Wet blue goat skins — Specification

ISO 5432:2013

Leather — Wet blue sheep skins — Specification

ISO/IEC 24752-2:2014

Information technology — User interfaces — Universal remote console — Part 2: User interface socket description

ISO 27892:2010

Vacuum technology — Turbomolecular pumps — Measurement of rapid shutdown torque

ISO 3766:2003

Construction drawings — Simplified representation of concrete reinforcement

ISO 16245:2009

Information and documentation — Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents

ISO 27587:2021

Leather — Chemical tests — Determination of free formaldehyde in process auxiliaries

ISO 4254-11:2010

Agricultural machinery — Safety — Part 11: Pick-up balers

ISO/IEC 24713-3:2009

Information technology — Biometric profiles for interoperability and data interchange — Part 3: Biometrics-based verification and identification of seafarers

ISO 7651:1991

Commercial vehicles and buses — Mounting dimensions for alternators of types 1, 2 and 3

ISO 1926:2009

Rigid cellular plastics — Determination of tensile properties

ISO 7649:1991

Clutch housings for reciprocating internal combustion engines — Nominal dimensions and tolerances

ISO 18646-2:2019

Robotics — Performance criteria and related test methods for service robots — Part 2: Navigation

ISO 5562:1983

Turmeric, whole or ground (powdered) — Specification

ISO 5563:1984

Dried peppermint (Mentha piperita Linnaeus) — Specification

ISO/IEC 21122-5:2020

Information technology — JPEG XS low-latency lightweight image coding system — Part 5: Reference software

ISO 2699:1994

Diesel engines — Flange-mounted fuel injectors, size "S" — Types 2, 3, 4, 5 and 6

ISO 2602:1980

Statistical interpretation of test results — Estimation of the mean — Confidence interval

ISO/IEC 21122-4:2020

Information technology — JPEG XS low-latency lightweight image coding system — Part 4: Conformance testing

ISO 4823:2021

Dentistry — Elastomeric impression and bite registration materials

ISO 11783-10:2015

Tractors and machinery for agriculture and forestry — Serial control and communications data network — Part 10: Task controller and management information system data interchange

ISO 286-1:2010

Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes — Part 1: Basis of tolerances, deviations and fits

ISO 4528:2015

Vitreous and porcelain enamel finishes — Guide to selection of test methods for vitreous and porcelain enamelled areas of articles

ISO 19881:2018

Gaseous hydrogen — Land vehicle fuel containers

ISO 6489-3:2021

Agricultural vehicles — Mechanical connections between towed and towing vehicles — Part 3: Tractor drawbar

ISO 8434-6:2009

Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring

ISO/IEC 24752-5:2014

Information technology — User interfaces — Universal remote console — Part 5: Resource description

ISO 23976:2021

Plastics — Fast differential scanning calorimetry (FSC) — Chip calorimetry

ISO 12151-2:2003

Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings

ISO 17126:2005

Soil quality — Determination of the effects of pollutants on soil flora — Screening test for emergence of lettuce seedlings (Lactuca sativa L.)

ISO 14235:1998

Soil quality — Determination of organic carbon by sulfochromic oxidation

ISO 3008-4:2021

Fire resistance tests — Door and shutter assemblies — Part 4: Linear joint fire seal materials used to seal the gap between a fire door frame and the supporting construction

ISO/IEC TR 33017:2021

Information technology — Process assessment — Framework for assessor training

ISO 14644-17:2021

Cleanrooms and associated controlled environments — Part 17: Particle deposition rate applications

ISO 5479:1997

Statistical interpretation of data — Tests for departure from the normal distribution

ISO 14053:2021

Environmental management — Material flow cost accounting — Guidance for phased implementation in organizations

ISO 3912:1977

Woodruff keys and keyways

ISO 21901:2021

Thermal insulation — Test method for thermal diffusivity — Periodic heat method

ISO 21191:2021

Equipment for crop protection — Closed transfer systems (CTS) — Performance specification

ISO 16063-15:2006

Methods for the calibration of vibration and shock transducers — Part 15: Primary angular vibration calibration by laser interferometry

ISO/IEC 24752-4:2014

Information technology — User interfaces — Universal remote console — Part 4: Target description

ISO 15372:2000/AMD 1:2021

Ships and marine technology — Inflatable rescue boats — Coated fabrics for inflatable chambers — Amendment 1: Oil-resistance test

ISO 6742-2:2015

Cycles — Lighting and retro-reflective devices — Part 2: Retro-reflective devices

ISO/IEC 24752-1:2014

Information technology — User interfaces — Universal remote console — Part 1: General framework

ISO 6742-1:2015

Cycles — Lighting and retro-reflective devices — Part 1: Lighting and light signalling devices

ISO/TR 10828:2015

Worm gears — Worm profiles and gear mesh geometry

ISO 24496:2021

Office furniture — Office chairs — Methods for the determination of dimensions

ISO 23875:2021

Mining — Air quality control systems for operator enclosures — Performance requirements and test methods

ISO 22300:2021

Security and resilience — Vocabulary

ISO 7542:1984

Ground (powdered) paprika (Capsicum annuum Linnaeus) — Microscopical examination

ISO/IEC 29141:2009

Information technology — Biometrics — Tenprint capture using biometric application programming interface (BioAPI)

ISO 16234:2006

Heavy commercial vehicles and buses — Straight-ahead braking on surfaces with split coefficient of friction — Open-loop test method

ISO 7543-2:1993

Chillies and chilli oleoresins — Determination of total capsaicinoid content — Part 2: Method using high-performance liquid chromatography

ISO 7543-1:1994

Chillies and chilli oleoresins — Determination of total capsaicinoid content — Part 1: Spectrometric method

ISO/IEC 15944-2:2015

Information technology — Business operational view — Part 2: Registration of scenarios and their components as business objects

ISO 8123:1991

Road vehicles — Diametral pitch starter motor pinions

ISO/IEC 29197:2015

Information technology — Evaluation methodology for environmental influence in biometric system performance

ISO 7926:1991

Dehydrated tarragon (Artemisia dracunculus Linnaeus) — Specification

ISO 1442:1997

Meat and meat products — Determination of moisture content (Reference method)

ISO 4086:2001

Road vehicles — 90 semi-trailer fifth wheel kingpin — Interchangeability

IEC/TR 80001-2-8:2016

Application of risk management for IT-networks incorporating medical devices — Part 2-8: Application guidance — Guidance on standards for establishing the security capabilities identified in IEC 80001-2-2

ISO 4217:2015

Codes for the representation of currencies

ISO 7231:2010

Polymeric materials, cellular, flexible — Determination of air flow value at constant pressure-drop

ISO 12133:2021

Small craft — Carbon monoxide (CO) detection systems and alarms

ISO/IEC 23761:2021

Digital publishing — EPUB accessibility — Conformance and discoverability requirements for EPUB publications

ISO/IEC TS 33030:2017

Information technology — Process assessment — An exemplar documented assessment process

ISO 17130:2021

Leather — Physical and mechanical tests — Determination of dimensional change

ISO 17226-1:2021

Leather — Chemical determination of formaldehyde content — Part 1: Method using high-performance liquid chromatography

ISO 7928-1:1991

Savory — Specification — Part 1: Winter savory (Satureja montana Linnaeus)

ISO 7928-2:1991

Savory — Specification — Part 2: Summer savory (Satureja hortensis Linnaeus)

ISO 7707:1986

Commercial road vehicles — Connections for rear-mounted power take-offs (PTO)

ISO/IEC 19794-3:2006

Information technology — Biometric data interchange formats — Part 3: Finger pattern spectral data

ISO 4156-1:2021

Straight cylindrical involute splines — Metric module, side fit — Part 1: Generalities

ISO 10803:2011

Design method for ductile iron pipes

ISO 21001:2018

Educational organizations — Management systems for educational organizations — Requirements with guidance for use

ISO 22185-1:2021

Diagnosing moisture damage in buildings and implementing countermeasures — Part 1: Principles, nomenclature and moisture transport mechanisms

ISO 22184:2021

Milk and milk products — Determination of the sugar contents — High performance anion exchange chromatography with pulsed amperometric detection method (HPAEC-PAD)

ISO 17268:2020

Gaseous hydrogen land vehicle refuelling connection devices

ISO 6621-4:2015

Internal combustion engines — Piston rings — Part 4: General specifications

ISO 22031:2021

Sampling and test method for cleanable filter media taken from filters of systems in operation

ISO 10924-3:2015

Road vehicles — Circuit breakers — Part 3: Miniature circuit breakers with tabs (Blade type), Form CB11

ISO 14687:2019

Hydrogen fuel quality — Product specification

ISO 8536-12:2021

Infusion equipment for medical use — Part 12: Check valves for single use

ISO 1108:1992

Spices and condiments — Determination of non-volatile ether extract

ISO 5809:1982

Starches and derived products — Determination of sulphated ash

ISO 5810:1982

Starches and derived products — Determination of chloride content — Potentiometric method

ISO 4156-2:2021

Straight cylindrical involute splines — Metric module, side fit — Part 2: Dimensions

ISO 4156-3:2021

Straight cylindrical involute splines — Metric module, side fit — Part 3: Inspection

ISO 11108:1996

Information and documentation — Archival paper — Requirements for permanence and durability

ISO 7464:1983

Earth-moving machinery — Method of test for the measurement of drawbar pull

ISO 23475-1:2021

Testing method for steel tyre cord — Part 1: General requirements

ISO 8035:1991

Commercial road vehicles and buses over 3,5 t — Front towing attachments

ISO 21912:2021

Solid recovered fuels — Safe handling and storage of solid recovered fuels

ISO 11839:2021

Machinery for forestry — Thrown object guard — Test method and performance criteria

ISO 23603:2005

Standard method of assessing the spectral quality of daylight simulators for visual appraisal and measurement of colour

ISO 19882:2018

Gaseous hydrogen — Thermally activated pressure relief devices for compressed hydrogen vehicle fuel containers

ISO/IEC 30107-4:2020

Information technology — Biometric presentation attack detection — Part 4: Profile for testing of mobile devices

ISO 7425-1:2021

Hydraulic fluid power cylinders — Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals — Part 1: Piston seal housings

ISO 7425-2:2021

Hydraulic fluid power cylinders — Dimensions and tolerances of housings for elastomer-energized, plastic-faced seals — Part 2: Rod seal housings

ISO 1520:2006

Paints and varnishes — Cupping test

ISO 1513:2010

Paints and varnishes — Examination and preparation of test samples

ISO 17225-3:2021

Solid biofuels — Fuel specifications and classes — Part 3: Graded wood briquettes

ISO 24076:2021

Plastics — Polypropylene (PP) — Determination of isotactic index by low-resolution nuclear magnetic resonance spectrometry

ISO 15632:2021

Microbeam analysis — Selected instrumental performance parameters for the specification and checking of energy-dispersive X-ray spectrometers (EDS) for use with a scanning electron microscope (SEM) or an electron probe microanalyser (EPMA)

ISO/IEC 19763-6:2015

Information technology — Metamodel framework for interoperability (MFI) — Part 6: Registry Summary

ISO/IEC 19763-5:2015

Information technology — Metamodel framework for interoperability (MFI) — Part 5: Metamodel for process model registration

ISO 10110-5:2015

Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances

ISO 10924-2:2014

Road vehicles — Circuit breakers — Part 2: User's guide

ISO/IEC 29109-1:2009

Information technology — Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 — Part 1: Generalized conformance testing methodology

ISO 11453:1996

Statistical interpretation of data — Tests and confidence intervals relating to proportions

ISO 496:1973

Driving and driven machines — Shaft heights

ISO 21187:2021

Milk — Quantitative determination of microbiological quality — Guidance for establishing and verifying a conversion relationship between results of an alternative method and anchor method results